Development of Oral Tablets of Nebivolol with Improved Dissolution Properties, Based on Its Combinations with Cyclodextrins.

New oral tablets of nebivolol have been developed aiming to improve, by cyclodextrin (CD) complexation, its low solubility/dissolution properties-the main reason behind its poor/variable oral bioavailability. Phase-solubility studies, performed using ßCD and highly-soluble ßCD-derivatives, indicated sulfobutylether-ßCD (SBEßCD) as the best solubilizing/complexing agent. Solid drug-SBEßCD systems were prepared by different methods and characterized for solid-state and dissolution properties. The coevaporated product was chosen for tablet development since it provided the highest dissolution rate (100% increase in dissolved drug at 10 min) and almost complete drug amorphization/complexation. The developed tablets reached the goal, allowing us to achieve 100% dissolved drug at 60 min, compared to 66% and 64% obtained, respectively, with a reference tablet without CD and a commercial tablet. However, the percentage dissolved after 10 min from such tablets was only 10% higher than the reference. This was ascribed to the potential binding/compacting abilities of SBEßCD, reflected in the greater hardness and longer disintegration times of the new tablets than the reference (7.64 vs. 1.06 min). A capsule formulation with the same composition of nebivolol-SBEßCD tablets showed about a 90% increase in dissolved drug after 5 min compared to the reference tablet, and reached 100% dissolved drug after only 20 min.

Taste Masking of Dexketoprofen Trometamol Orally Disintegrating Granules by High-Shear Coating with Glyceryl Distearate.

Orally disintegrating granules (ODGs) are a pharmaceutical form commonly used for the administration of NSAIDs because of their easy assumption and fast dispersion. The development of ODGs is not easy for drugs like dexketoprofen trometamol (DXKT), which have a bitter and burning taste. In this work, high-shear coating (HSC) was used as an innovative technique for DKXT taste masking. This study focused on coating DXKT granules using the HSC technique with a low-melting lipid excipient, glyceryl distearate (GDS). The HSC technique allowed for the coating to be developed through the thermal rise resulting from the friction generated by the granules movement inside the equipment, causing the coating excipient to soften. The design of the experiment was used to find the best experimental coating conditions in order to gain effective taste masking by suitably reducing the amount of drug released in the oral cavity. The influence of the granule dimensions was also investigated. Coating effectiveness was evaluated using a simulated saliva dissolution test. It was found that low impeller speed (300 rpm) and a 20% coating excipient were effective in suitably reducing the drug dissolution rate and then in taste masking. The coated granules were characterized for their morphology and solid-state properties by SEM, BET, XRPD, DSC, and NIR analyses. A human taste panel test confirmed the masking of DXKT taste in the selected batch granules.

Design, Evaluation and Comparison of Nanostructured Lipid Carriers and Chitosan Nanoparticles as Carriers of Poorly Soluble Drugs to Develop Oral Liquid Formulations Suitable for Pediatric Use.

There is a serious need of pediatric drug formulations, whose lack causes the frequent use of extemporaneous preparations obtained from adult dosage forms, with consequent safety and quality risks. Oral solutions are the best choice for pediatric patients, due to administration ease and dosage-adaptability, but their development is challenging, particularly for poorly soluble drugs. In this work, chitosan nanoparticles (CSNPs) and nanostructured lipid carriers (NLCs) were developed and evaluated as potential nanocarriers for preparing oral pediatric solutions of cefixime (poorly soluble model drug). The selected CSNPs and NLCs showed a size around 390 nm, Zeta-potential > 30 mV, and comparable entrapment efficiency (31-36%), but CSNPs had higher loading efficiency (5.2 vs. 1.4%). CSNPs maintained an almost unchanged size, homogeneity, and Zeta-potential during storage, while NLCs exhibited a marked progressive Zeta-potential decrease. Drug release from CSNPs formulations (differently from NLCs) was poorly affected by gastric pH variations, and gave rise to a more reproducible and controlled profile. This was related to their behavior in simulated gastric conditions, where CSNPs were stable, while NLCs suffered a rapid size increase, up to micrometric dimensions. Cytotoxicity studies confirmed CSNPs as the best nanocarrier, proving their complete biocompatibility, while NLCs formulations needed 1:1 dilution to obtain acceptable cell viability values.

Niosomes as Biocompatible Scaffolds for the Multivalent Presentation of Tumor-Associated Antigens (TACAs) to the Immune System.

Fully synthetic tumor-associated carbohydrate antigen (TACA)-based vaccines are a promising strategy to treat cancer. To overcome the intrinsic low immunogenicity of TACAs, the choice of the antigens' analogues and multivalent presentation have been proved to be successful. Here, we present the preparation, characterization, and in vitro screening of niosomes displaying multiple copies of the mucin antigen TnThr (niosomes-7) or of TnThr mimetic 1 (niosomes-2). Unprecedentedly, structural differences, likely related to the carbohydrate portions, were observed for the two colloidal systems. Both niosomal systems are stable, nontoxic and endowed with promising immunogenic properties.

Development and Characterization of Cyclodextrin-Based Nanogels as a New Ibuprofen Cutaneous Delivery System.

Nanogels combine the properties of hydrogels and nanocarrier systems, resulting in very effective drug delivery systems, including for cutaneous applications. Cyclodextrins (CDs) have been utilised to enhance the nanogels' loading ability towards poorly soluble drugs and promote/sustain drug release. However, formation of CD-based nanogels requires the use of specially modified CDs, or of crosslinking agents. The aim of this work was to develop a CD-based nanogel to improve the cutaneous delivery of ibuprofen by using the soluble ß-cyclodextrin/epichlorohydrin polymer (EPIßCD) without adding any potentially toxic crosslinker. The use of EPIßCD enabled increasing ibuprofen loading due to its complexing/solubilizing power towards the poorly soluble drug and prolonging drug release over time due to the nanogel formation. DLS analysis proved that EPIßCD allowed the formation of nanostructures ranging from 60 up to 400 nm, depending on the gelling agent type and the gel preparation method. EPIßCD replacement with monomeric HPßCD did not lead in any case to nanogel formation. Permeation experiments using skin-simulating artificial membranes proved that the EPIßCD-based nanogel enhanced ibuprofen solubility and release, increasing its permeation rate up to 3.5 times, compared to a reference formulation without CD and to some commercial gel formulations, and also assured a sustained release. Moreover, EPIßCD replacement with HPßCD led to a marked increase in drug solubility and initial release rate, but did not provide a prolonged release due to the lack of a nano-matrix structure controlling drug diffusion.

Repurposing of parenterally administered active substances used to treat pain both systemically and locally.

Pain is a constant in our lives. The efficacy of drug therapy administered by the parenteral route is often limited either by the physicochemical characteristics of the drug itself or its adsorption-distribution-metabolism-excretion (ADME) mechanisms. One promising alternative is the design of innovative drug delivery systems that can improve the pharmacokinetics |(PK) and/or reduce the toxicity of traditionally used drugs. In this review, we discuss several products that have been approved by the main regulatory agencies (i.e., nano- and microsystems, implants, and oil-based solutions), highlighting the newest technologies that govern both locally and systemically the delivery of drugs. Finally, we also discuss the risk assessment of the scale-up process required, given the impact that this approach could have on drug manufacturing. Teaser: The management of pain by way of the parenteral route can be improved using complex drug delivery systems (e.g., micro- and nanosystems) which require high-level assessment and shorten the regulatory pathway.

Multiple Roles of Chitosan in Mucosal Drug Delivery: An Updated Review.

Chitosan (CS) is a linear polysaccharide obtained by the deacetylation of chitin, which, after cellulose, is the second biopolymer most abundant in nature, being the primary component of the exoskeleton of crustaceans and insects. Since joining the pharmaceutical field, in the early 1990s, CS attracted great interest, which has constantly increased over the years, due to its several beneficial and favorable features, including large availability, biocompatibility, biodegradability, non-toxicity, simplicity of chemical modifications, mucoadhesion and permeation enhancer power, joined to its capability of forming films, hydrogels and micro- and nanoparticles. Moreover, its cationic character, which renders it unique among biodegradable polymers, is responsible for the ability of CS to strongly interact with different types of molecules and for its intrinsic antimicrobial, anti-inflammatory and hemostatic activities. However, its pH-dependent solubility and susceptibility to ions presence may represent serious drawbacks and require suitable strategies to be overcome. Presently, CS and its derivatives are widely investigated for a great variety of pharmaceutical applications, particularly in drug delivery. Among the alternative routes to overcome the problems related to the classic oral drug administration, the mucosal route is becoming the favorite non-invasive delivery pathway. This review aims to provide an updated overview of the applications of CS and its derivatives in novel formulations intended for different methods of mucosal drug delivery.

Role of Cyclodextrins and Drug Solid State Properties on Flufenamic Acid Dissolution Performance from Tablets.

Flufenamic acid (FFA) is a non-steroidal anti-inflammatory drug characterised by a low solubility and problems of variable dissolution rate and bio-inequivalence. Different FFA batches, obtained by different suppliers, showed different powder characteristics (particle size, shape and surface properties) that may affect its dissolution behaviour from solid dosage forms. Aim of this work was the improvement of FFA solubility and dissolution rate by the use of cyclodextrins (CDs) and the obtainment of an effective tablet formulation by direct compression. Several CDs have been tested, both in solution and in solid state and several binary systems drug-CDs have been obtained with different techniques, with the scope to select the most effective system. Grinding technique with randomly methylated-ß-cyclodextrin (RAMEB) was the only one that allowed the complete drug amorphization, together with the highest improvement in drug dissolution rate, and was then selected for tablets formulation. Conventional and immediate release tablets were obtained and fully characterised for technological properties. In both cases an improved and well reproducible drug dissolution performance was obtained, independently from the FFA supplier and thus no more affected by the differences observed between the original FFA crystalline samples.

Preparation, Characterization and Evaluation of the Anti-Inflammatory Activity of Epichlorohydrin-ß-Cyclodextrin/Curcumin Binary Systems Embedded in a Pluronic®/Hyaluronate Hydrogel.

Curcumin (Cur) is an anti-inflammatory polyphenol that can be complexed with polymeric cyclodextrin (CD) to improve solubility and bioavailability. The aim of the present work was to prepare a CurCD hydrogel to treat inflammatory skin conditions. Epichlorohydrin-ß-CD (EpißCD) was used as polymeric CD. To characterize the binary system, solid-state and in-solution studies were performed. Afterwards, an experimental design was performed to optimize the hydrogel system. Finally, the CurEpißCD hydrogel system was tested for anti-inflammatory activity using a HaCat psoriasis cell model. Co-grinded Cur/EpißCD binary system showed a strong interaction and Curcumin solubility was much improved. Its combination with Pluronic® F-127/hyaluronate hydrogel demonstrated an improvement in release rate and Curcumin permeation. After testing its anti-inflammatory activity, the system showed a significant reduction in IL-6 levels. Hydrogel-containing CurEpißCD complex is a great alternative to treat topical inflammatory diseases.

Combined Use of Cyclodextrins and Amino Acids for the Development of Cefixime Oral Solutions for Pediatric Use.

Cefixime (CEF) is a cephalosporin included in the WHO Model List of Essential Medicines for Children. Liquid formulations are considered the best choice for pediatric use, due to their great ease of administration and dose-adaptability. Owing to its very low aqueous solubility and poor stability, CEF is only available as a powder for oral suspensions, which can lead to reduced compliance by children, due to its unpleasant texture and taste, and possible non-homogeneous dosage. The aim of this work was to develop an oral pediatric CEF solution endowed with good palatability, exploiting the solubilizing and taste-masking properties of cyclodextrins (CDs), joined to the use of amino acids as an auxiliary third component. Solubility studies indicated sulfobutylether-ß-cyclodextrin (SBEßCD) and Histidine (His) as the most effective CD and amino acid, respectively, even though no synergistic effect on drug solubility improvement by their combined use was found. Molecular Dynamic and 1H-NMR studies provided insight into the interactions of binary CEF:His and ternary CEF:His:SBEßCD systems used to prepare CEF solutions, which resulted stable and maintained unchanged antimicrobial activity during the two-weeks-use in therapy. The ternary solution was superior in terms of more tolerable pH (5.6 vs. 4.7) and better palatability, being resulted completely odorless by a panel test.

Development of a Cyclodextrin-Based Mucoadhesive-Thermosensitive In Situ Gel for Clonazepam Intranasal Delivery.

A thermosensitive, mucoadhesive in-situ gel for clonazepam (CLZ) intranasal delivery was developed, which aimed to achieve prolonged in-situ residence and controlled drug release, overcoming problems associated with its oral or parenteral administration. Poloxamer was selected as a thermosensitive polymer and chitosan glutamate and sodium hyaluronate as mucoadhesive and permeation enhancer. Moreover, randomly methylated ß-Cyclodextrin (RAMEB) was used to improve the low drug solubility. A screening DoE was applied for a systematic examination of the effect of varying the formulation components proportions on gelation temperature, gelation time and pH. Drug-loaded gels at different clonazepam-RAMEB concentrations were then prepared and characterized for gelation temperature, gelation time, gel strength, mucoadhesive strength, mucoadhesion time, and drug release properties. All formulations showed suitable gelation temperature (29-30.5 °C) and time (50-65 s), but the one with the highest drug-RAMEB concentration showed the best mucoadhesive strength, longest mucoadhesion time (6 h), and greatest release rate. Therefore, it was selected for cytotoxicity and permeation studies through Caco-2 cells, compared with an analogous formulation without RAMEB and a drug solution. Both gels were significantly more effective than the solution. However, RAMEB was essential not only to promote drug release, but also to reduce drug cytotoxicity and further improve its permeability.

Improvement of Butamben Anesthetic Efficacy by the Development of Deformable Liposomes Bearing the Drug as Cyclodextrin Complex.

This work was aimed at enhancing butamben (BTB) anesthetic efficacy by the "drug-in cyclodextrin (CD)-in deformable liposomes" strategy. In the study, phase-solubility studies with natural (α-, ß-, γ-) and derivative (hydroxypropyl-α-and ß-, sulfobutylether-ß, methyl-ß) CDs evidenced the highest BTB affinity for ßCD and its derivatives and indicated methyl-ßCD (RAMEB) as the best carrier. Drug-RAMEB complexes were prepared by different techniques and were characterized for solid-state and dissolution properties. The best BTB-RAMEB product was chosen for entrapment in the aqueous core of deformable liposomes containing stearylamine, either alone or with sodium cholate, as edge activators. Double-loaded (DL) liposomes, bearing the lipophilic drug (0.5% w/v) in the bilayer and its hydrophilic RAMEB complex (0.5% w/v) in the aqueous core, were compared to single-loaded (SL) liposomes bearing 1% w/v plain drug in the bilayer. All vesicles showed homogeneous dimensions (i.e., below 300 nm), high deformability, and excellent entrapment efficiency. DL-liposomes were more effective than SL ones in limiting drug leakage (<5% vs. >10% after a 3 months storage at 4 °C). In vivo experiments in rabbits proved that all liposomal formulations significantly (p < 0.05) increased the intensity and duration of drug anesthetic action compared to its hydroalcoholic solution; however, DL liposomes were significantly (p < 0.05) more effective than SL ones in prolonging BTB anesthetic effect, owing to the presence of the drug-RAMEB complex in the vesicle core, acting as a reservoir. DL liposomes containing both edge activators were found to have the best performance.

Cyclodextrin Inclusion Complexes of Auranofin and Its Iodido Analog: A Chemical and Biological Study.

Auranofin (AF) and its iodido analog, i.e., Au(PEt3) I (AFI), were reported to exhibit very promising anticancer properties both in vitro and in vivo. However, both these gold compounds have a scarce aqueous solubility that hampers their pharmaceutical use. Here, we explore whether encapsulation of these metallodrugs inside hydroxypropyl-beta-cyclodextrin (HPß-CD) may lead to an improved biopharmaceutical profile for the resulting adducts. Phase solubility studies, performed at 25 °C in an aqueous buffer, revealed, in both cases, the formation of a 1:1 drug to cyclodextrin complex; a far greater apparent stability constant (K1:1) was measured for AFI compared to AF (331 M-1 versus ca. 30 M-1). NMR studies conducted on the AFI/HPß-CD system confirmed the formation of a stable 1:1 adduct. Then, binary systems of AF and AFI with HPß-CD were prepared by colyophilization and characterized by DSC and PXRD. The results revealed the occurrence of drug complexation and/or amorphization for the AFI/HPß-CD binary system. Afterwards, the antiproliferative properties of the two cyclodextrin adducts and of the corresponding free drugs were comparatively evaluated in vitro in three representative ovarian cancer cell lines, i.e., A2780, SKOV3, and IGROV-1. The results, in all cases, point out that CD complexation of the two gold drugs does not substantially affect their biological activity. The implications of these findings are discussed in the frame of the current knowledge of AF and its analogs.

Evaluation and Comparison of Solid Lipid Nanoparticles (SLNs) and Nanostructured Lipid Carriers (NLCs) as Vectors to Develop Hydrochlorothiazide Effective and Safe Pediatric Oral Liquid Formulations.

The aim of this study was the optimization of solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) in terms of physicochemical and biopharmaceutical properties, to develop effective and stable aqueous liquid formulations of hydrochlorothiazide, suitable for paediatric therapy, overcoming its low-solubility and poor-stability problems. Based on solubility studies, Precirol® ATO5 and Transcutol® HP were used as solid and liquid lipids, respectively. The effect of different surfactants, also in different combinations and at different amounts, on particle size, homogeneity and surface-charge of nanoparticles was carefully investigated. The best formulations were selected for drug loading, and evaluated also for entrapment efficiency and release behaviour. For both SLN and NLC series, the use of Gelucire® 44/14 as surfactant rather than PluronicF68 or Tween® 80 yielded a marked particle size reduction (95-75 nm compared to around 600-400 nm), and an improvement in entrapment efficiency and drug release rate. NLC showed a better performance than SLN, reaching about 90% entrapped drug (vs. 80%) and more than 90% drug released after 300 min (vs. about 65%). All selected formulations showed good physical stability during 6-month storage at 4 °C, but a higher loss of encapsulated drug was found for SLNs (15%) than for NLCs (<5%). Moreover, all selected formulations revealed the absence of any cytotoxic effect, as assessed by a cell-viability test on Caco-2 cells and are able to pass the intestinal epithelium as suggested by Caco-2 uptake experiments.

Dual Carbonic Anhydrase IX/XII Inhibitors and Carbon Monoxide Releasing Molecules Modulate LPS-Mediated Inflammation in Mouse Macrophages.

Low concentrations of carbon monoxide (CO) were reported to exhibit anti-inflammatory effects when administered in cells by suitable chemotypes such as CO releasing molecules (CO-RMs). In addition, the pH-modulating abilities of specific carbonic anhydrase isoforms played a crucial role in different models of inflammation and neuropathic pain. Herein, we report a series of chemical hybrids consisting of a Carbonic Anhydrase (CA) inhibitor linked to a CO-RM tail (CAI/CO-RMs). All compounds and their precursors were first tested in vitro for their inhibition activity against the human CA I, II, IX, and XII isoforms as well their CO releasing properties, aiming at corroborating the data by means of molecular modelling techniques. Then, their impact on metabolic activity modulation of RAW 264.7 mouse macrophages for 24 and 48 h was assessed with or without lipopolysaccharide (LPS) stimulation. The compounds were shown to counteract the inflammatory stimulus as also indicated by the reduced tumor necrosis factor alpha (TNF-α) release after treatment. All the biological results were compared to those of N-acetylcysteine (NAC) as a reference antioxidant compound. Within the series, two CAI/CO-RM hybrids (1 and 2), bearing both the well-known scaffold able to inhibit CAs (acesulfame) and the cobalt-based CO releasing portion, induced a higher anti-inflammatory effect up to 48 h at concentrations lower than NAC.

Development of a stable oral pediatric solution of hydrochlorothiazide by the combined use of cyclodextrins and hydrophilic polymers.

Hydrochlorothiazide (HCT) is widely used in pediatrics for hypertension management. Due to the lack of pediatric commercial forms, community or hospital pharmacies generally prepare HCT extemporaneous pediatric suspensions by dispersing in water a portion of a crushed tablet or the drug powder; however, any dose or stability control is usually done on these preparations. Obtaining stable HCT solutions is very challenging, due to its low water-solubility and pH-dependent degradation. The aim of this work was to develop a stable 2 mg/mL-HCT oral pediatric solution without using co-solvents. Combined use of cyclodextrins (CD) and hydrophilic polymers was exploited to improve poor HCT solubility and stability. HPßCD and SBEßCD were selected, considering their safe toxicological profiles, while PVP resulted the best among the tested polymers. Low PVP concentrations (0.2-1.0%) improved the solubilizing efficiency of both CDs, allowing to reach the prefixed HCT concentration. Different CD-PVP concentrations were used to prepare several 2 mg/mL-HCT solutions in pH 5.5 buffer. The best stability was shown by solutions containing the highest SBEßCD concentration (25 mM), which allowed a 3-months stability at 4 °C. In vivo studies on rats showed that such formulation allowed a more pronounced and more reproducible diuretic effect than the corresponding HCT suspension.

ß-Sitosterol Loaded Nanostructured Lipid Carrier: Physical and Oxidative Stability, In Vitro Simulated Digestion and Hypocholesterolemic Activity.

The objective of the present study was to explore the potential of nanostructured lipid carriers (NLCs) for improving the oral delivery of ß-sitosterol, a poorly water-soluble bioactive component with hypocholesterolemic activity. Two ß-sitosterol formulations with different solid lipid compositions were prepared by melt emulsification, followed by the sonication technique, and the effect of storage conditions and simulated digestion on the physical, chemical and oxidative stability, bioaccessibility and release were extensively studied. Both NLC preparations remained relatively stable during the four weeks of storage at different conditions (4, 25 and 40 °C), with more superior stability at lower temperatures. The in vitro digestion experiment indicated a high physical stability after exposure to the simulated mouth and stomach stages and an improved overall ß-sitosterol bioaccessibility at the end of the digestion. The NLCs presented an increased solubility and gradual release which could be justified by the remarkable affinity of ß-sitosterol to the complex lipid mixture. An in vivo study demonstrated an improved reduction in the total cholesterol and low-density lipoprotein cholesterol plasma levels in mice compared with the drug suspension. These investigations evidenced the potential of the developed NLC formulations for the enhancement of solubility and in vivo performance of ß-sitosterol.

Tablets of "Hydrochlorothiazide in Cyclodextrin in Nanoclay": A New Nanohybrid System with Enhanced Dissolution Properties.

Hydrochlorothiazide (HCT), a Biopharmaceutical Classification System (BCS) class IV drug, is characterized by low solubility and permeability, that negatively affect its oral bioavailability, reducing its therapeutic efficacy. The combined use of cyclodextrins (CDs) and nanoclays (NCs) recently proved to be a successful strategy in developing delivery systems able to merge the potential benefits of both carriers. In this work, several binary systems of CDs or NCs with the drug were obtained, using different drug:carrier ratios and preparation techniques, and characterized in solution and in solid state, to properly select the most effective system and preparation method. Then, the best CD (RAMEB) and NC (sepiolite), at the best drug:carrier ratio, was selected for preparation of the ternary system by co-evaporation and emerged as the most effective preparation method. The combined presence of RAMEB and sepiolite gave rise to a synergistic improvement of drug dissolution properties, with a two-fold increase in the amount of drug dissolved as compared with the corresponding HCT-RAMEB system, resulting in an approximately 12-fold increase in drug solubility as compared with the drug alone. The ternary system that was co-evaporated was then selected for a tablet formulation. The obtained tablets were fully characterized for technological properties and clearly revealed a better drug dissolution performance than the commercial reference tablet (Esidrex).

The role of solid state properties on the dissolution performance of flufenamic acid.

Flufenamic acid is a nonsteroidal anti-inflammatory drug characterized by a low solubility and a variable oral bioavailability. Flufenamic acid is present in the commercial products in two polymorphic enantiotropic forms (Form I and III). Bioinequivalence was observed for commercial solid dosage forms due to the different dissolution rate of batches. Aim of this work is the full characterization of the solid state properties of flufenamic acid in order to evidence reasons of its variable dissolution properties. Two different batches of pure drug obtained by different suppliers were fully characterized. In order to evaluate the effect of the technological processes used for tablet production, the powders were submitted to grinding, kneading, and compression. Thermal analysis and X-ray diffraction studies proved that the drug was provided by both suppliers as Form I, Form III is obtained by recrystallization from ethanol or ethanol/water of both batches and no changes were observed after the different mechanical treatments. No difference was observed between the two forms in terms of equilibrium solubility values. Dissolution rate studies evidenced a difference between the two batches due to their different particle size, which disappeared after sieving. Interestingly, a significant difference in terms of intrinsic dissolution rate and surface wettability of the two compacted powders was observed, even after sieving, probably related to a different behavior of the two powder samples under compaction. These results should be taken into account, during a tablet formulation, in order to obtain a reproducible dissolution performance of the drug, regardless of its original supplier.

Niosomal Formulation of a Lipoyl-Carnosine Derivative Targeting TRPA1 Channels in Brain.

The transient receptor potential akyrin type-1 (TRPA1) is a non-selective cation channel playing a pivotal role in pain sensation and neurogenic inflammation. TRPA1 channels expressed in the central nervous system (CNS) have a critical role in the modulation of cortical spreading depression (CSD), which is a key pathophysiological basis of migraine pain. ADM_09 is a recently developed lipoic acid-based TRPA1 antagonist that is able to revert oxaliplatin-induced neuropathic pain and inflammatory trigeminal allodynia. In this context, aiming at developing drugs that are able to target TRPA1 channels in the CNS and promote an antioxidant effect, permeability across the blood-brain barrier (BBB) represents a central issue. Niosomes are nanovesicles that can be functionalized with specific ligands selectively recognized by transporters expressed on the BBB. In this work, the activity of ADM_09 on neocortex cultures was studied, and an efficient formulation to cross the BBB was developed with the aim of increasing the concentration of ADM_09 into the brain and selectively delivering it to the CNS rapidly after parenteral administration.