RESUMEN
The Darcy-Forchheimer model is a commonly used and accurate method for simulating flow in porous media, proving beneficial for fluid separation, heat exchange, subsurface fluid transfer, filtration, and purification. The current study aims to describe heat and mass transfer in ternary nanofluid flow on a radially stretched sheet with activation energy. The velocity equation includes Darcy-Fochheimer porous media effects. The novelty of this study is enhanced by incorporating gyrotactic microorganisms which are versatile and in nanofluid can greatly improve the thermal conductivity and heat transfer properties of the base fluid, resulting in more efficient heat transfer systems. Furthermore, the governing PDEs are reduced to ODEs via appropriate similarity transformations. The influence of numerous parameters is expanded and physically depicted through the graphical illustration. As the Forchheimer number escalates, so do the medium's porosity and drag coefficient, resulting in more resistive forces and, as a result, lowering fluid velocity. It has been discovered that increasing the exponential heat source/sink causes convective flows that are deficient to transport heat away efficiently, resulting in a slower heat transfer rate. The concentration profile accumulates when the activation energy is large, resulting in a drop in the mass transfer rate. It is observed that the density of motile microorganisms increases with a rise in the Peclet number. Further, the results of the major engineering coefficients Skin-friction, Nusselt number, Sherwood number, and Microorganism density number are numerically examined and tabulated. Also, the numerical outcomes were found to be identical to the previous study.
RESUMEN
The exclusive behaviour of nanofluid has been actively emphasized due to the determination of improved thermal efficiency. Hence, the aim of this study is to highlight the laminar boundary layer axisymmetric stagnation point flow of Casson nanofluid past a stretching plate/cylinder under the influence of thermal radiation and suction/injection. Nanofluid comprises water and Fe3O4 as nanoparticles. In this article, a novel casson nanofluid model has been developed and studied on stretchable flat plate or circular cylinder. Adequate rational assumptions (velocity components) are employed for the transformation of the governing partial-differential equations into a group of non-dimensional ordinary-differential formulas, which are then solved analytically. The momentum and energy equations are solved through the complementary error function method and scaling quantities. Using various figures, the effects of essential factors on the nanofluid flow, heat transportation, and Nusselt number, are determined and explored. From obtained results, it is observed that the velocity field diminishes owing to magnification in stretching parameter [Formula: see text] and Casson fluid parameter [Formula: see text]. The temperature field increases by amplifying radiation [Formula: see text], and solid volume fraction parameter [Formula: see text]. The research is applicable to developing procedures for electric-conductive nanomaterials, which have potential applications in aircraft, smart coating transport phenomena, industry, engineering, and other sectors.
RESUMEN
This research article, explores the influence of an inclined magnetic field on the fluid flow over a permeable stretching/shrinking surface with heat transfer. The study use water as a conventional base fluid, with graphene oxide (GO) and Aluminum oxide (Al2O3) nanoparticles submerged to create a nanofluid, the system of governing nonlinear partial differential equations converted into ordinary differential equations via suitable similarity conversions. This allow for the unique solution for stretching sheet/shrinking sheets to be obtained, along with the corresponding temperature solution in terms of the hypergeometric function, several parameters are included in the investigation and their contribution is graphically explained to examine physical characteristics such as radiation, inclined magnetic field, solution domain, volume fraction parameter, and temperature jump. Increasing the volume fraction and thermal radiation increases the thermal boundary layer, increasing the magnetic field parameter and inverse Darcy number increases the temperature and decays the velocity profile. The present work has many useful applications in engineering, biological and physical sciences, as well as in cleaning engine lubricants and thrust-bearing technologies.
RESUMEN
The current studies analytically summarize the impact of magnetohydrodynamic and thermal radiation on the non-Newtonian continuous uniform motion of viscid non-compressible nanofluid across a penetrable stretching/shrinking sheet, even though accomplish Navier's first and second order slips along mass transpiration. Blood-bearing silver and copper nanomaterials have distinct flow and heat transfer properties when exposed to heat. Silver (Ag) as well as copper (Cu) nanoparticles are assumed to be present in blood as the non-Newtonian liquid; this fluid serves as the base. We anticipate that the current study will be useful in fields including food, petrochemical products, and medicines, as well as blood circulation, and highly beneficial for patients who are dealing with blood clotting in the uterus, which may result in infertility or cancer, to evaluate the blood flow in the tube. Employing the similarity conversion technique, the ruling partial differential equations are modified into a couple of non-linear ordinary differential equations. Then the transformed ordinary differential equations are analytically solved with the Laplace transformation and expressed in terms of an incomplete gamma function. The current analytical results are compared to previous studies. It is addressed how several physical features such as magnetic field M, Navier's first and second order slip, permeability, Prandtl number Pr, and radiation parameter affect non-dimensional velocity as well as temperature patterns through graphs. The results obtained reveal that there is an enhancement in the rate of heat transfer with the rise in nanoparticle volume fraction and radiation. The temperature distribution is also influenced by the presence of Prandtl numbers, radiation, solid volume fraction, permeability, and slip conditions. This shows that the solid volume fraction of nanoparticles can be used to control the behaviour of heat transfer and nanofluid flows.
RESUMEN
Present study explains about unsteady Casson nanoliquid film flow over a surface moving with velocity [Formula: see text]. The governing momentum equation is reduced to ODE by using corresponding similarity transformation, which is then tackled by employing numerical technique. The problem is analysed for both two-dimensional film flow and axisymmetric film flow. The exact solution is derived which satisfies the governing equation. It is noted that solution exists only for a specified scale of the moving surface parameter [Formula: see text]. ie., [Formula: see text] for two-dimensional flow and [Formula: see text] for axisymmetric flow. The velocity increases first and reaches the maximum velocity and then decreases to the boundary condition. Streamlines are also analysed for both axisymmetric and two-dimensional flow patterns by considering the stretching ([Formula: see text]) and shrinking wall conditions ([Formula: see text]). Study has been made for large values of wall moving parameter [Formula: see text]. The aim of this investigation is to analyse the Casson nanoliquid film flow which finds applications in industries like coating of sheet or wire, laboratories, painting, many more.
RESUMEN
The present investigation is carried out to predict the flow characteristics of a micropolar liquid that is infused with ternary nanoparticles across a stretching/shrinking surface under the impact of chemical reactions and radiation. Here, three dissimilarly shaped nanoparticles (copper oxide, graphene and copper nanotubes) are suspended in H2O to analyse the characteristics of flow, heat and mass transfer. The flow is analysed using the inverse Darcy model, while the thermal analysis is based on the thermal radiation. Furthermore, the mass transfer is examined in light of the impact of first order chemically reactive species. The considered flow problem is modelled resulting with the governing equations. These governing equations are highly non linear partial differential equations. Adopting suitable similarity transformations partial differential equations are reduced to ordinary differential equations. The thermal and mass transfer analysis comprises two cases: PST/PSC and PHF/PMF. The analytical solution for energy and mass characteristics is extracted in terms of an incomplete gamma function. The characteristics of a micropolar liquid are analysed for various parameters and presented through graphs. The impact of skin friction is also considered in this analysis. The stretching and rate of mass transfer have a large influence on the microstructure of a product manufactured in the industries. The analytical results produced in the current study seem to be helpful in the polymer industry for manufacturing stretched plastic sheets.
RESUMEN
The present work discusses the laminar boundary layer flow of an electrically conducting Casson fluid due to a horizontal perforated sheet undergoing linear shrinking/stretching with mass transpiration. Navier's slip and second-order slip conditions are also imposed on the flow. The system is subjected to a transverse magnetic field. The non-Newtonian flow under consideration obeys the rheological equation of state due to the Casson model. The PDEs governing the bounder layer flow is reduced to a nonlinear boundary value problem in ODEs by utilizing appropriate similarity transformations and are expressed analytically. The similarity solution is found to be a function of the Casson parameter, magnetic parameter, mass suction/injection parameter, and the first/second-order slip parameters. Such a solution is either unique, or dual solutions exist in a region defined by the mass transfer induced slip parameter. The results of the present work are found to be an increase of the magnetic effects resulting in expansion of the unique solution region and contraction of the dual solution region for the flow due to the induced Lorentz force. In the unique solution region, an increase in magnitudes of mass suction induced slip and the first/second-order slip parameters result in a reduction of the wall shear stress in the shrinking sheet, while the wall shear stress with mass suction increases with the Casson and the magnetic effects. Similar results exist for the stretching sheet case with mass suction. However, only unique similarity solutions exist only for the case of stretching sheets with mass injection. The current work is a generalization of the classical works of Crane (1970) and Pavlov (1974) for a stretching sheet. Mass suction/injection induced slip enhances and achieves a dominant flow driven by reversing the flow direction of the moving sheet, which allows an adjacent flow against the sheet. The findings have possible industrial applications in fluid-based systems including stretchable/shrinkable things, automated cooling systems, power generation, microelectronics, and present new results to the problem.
Asunto(s)
Campos Magnéticos , Registros , ReologíaRESUMEN
Current work portrays the flow of Marangoni convection Magneto hydrodynamics Casson fluid with carbon nanotubes under the effect of transpiration and radiation. The carbon nanotube particles namely water-single wall carbon nanotubes are inserted in the fluid to enhance better thermal efficiency. This type of flow problems is applicable for real life situations such as drying of silicon wafers, glues, crystal growth and heat exchangers and so on. The ordinary differential equations (ODEs) form of the result is yield to convert partial differential equations of the given equation by using similarity variables. Then this resulting ODEs are solved analytically, firstly using momentum equation to get solution domain and then by using this domain the energy equation solved to get the temperature profile in terms of Laguerre polynomial. Additionally, mass transpiration is also solved to get the concentration profile in terms of Laguerre polynomial. By using the different controlling parameters, the results can be discussed. And the effect of this parameters are discussed by using graphical arrangements. The newness of the present work is to explain the physically flow problem on the basis of chemically radiative thermosolutal Marangoni convective fluid.
RESUMEN
Hybrid nanofluids (HNFs) comprise combinations of different nanoparticles suspended in base fluid. Applications of such nanofluids are rising in the areas of energy and biomedical engineering including smart (functional) coatings. Motivated by these developments, the present article examines theoretically the magnetohydrodynamic coating boundary layer flow of HNFs from a stretching sheet under the transverse magnetic field in porous media with chemically reactive nanoparticles. Darcy's law is deployed. Momentum slips of both first and second order are included as is solutal slip. The transformed boundary value problem is solved analytically. Closed form solutions for velocity are derived in terms of exponential functions and for the concentration field in terms of incomplete Gamma functions by the application of the Laplace transformation technique. The influence of selected parameters e.g. suction/injection, magnetic field and slips on velocity and concentration distributions are visualized graphically. Concentration magnitudes are elevated with stronger magnetic field whereas they are suppressed with greater wall solutal slip. Magnetic field suppresses velocity and increases the thickness of the hydrodynamic boundary layer. The flow is accelerated with reduction in inverse Darcy number and stronger suction direct to reduce in skin friction. The concentration magnitudes are boosted with magnetic field whereas they are depleted with increasing solutal slip. The analysis provides a good foundation for further investigations using numerical methods.
RESUMEN
The current work studies the motion of viscoelastic liquid saturated with carbon nanotubes over a stretching surface in a Darcy porous medium analytically below an influence of Cattaneo-Christov heat flux. The carbon nanotubes (CNTs) act as nanoparticles which are then appended into the base fluid. Water and kerosene are used as a base fluid with two types of CNTs, namely, Single-wall carbon nanotubes and Multiwall carbon nanotubes. Carbon nanotubes possess a wide range of industrial and biomedical applications including energy production, nuclear reactor cooling, and galaxy cooling applications because they can expand the thermal and mechanical properties of base things. As a result, the carbon nanotubes used in the mentioned fields are being investigated for their potential in heat transfer applications. Governing equations formulated using the Partial differential equations have converted to Ordinary differential equations exhausting the appropriate comparison transformation process. An influence of some relevant constraints on velocity and temperature is evaluated in details. The Cattaneo-Christov heat transfer model is utilized to investigate the heat transfer individualities with varying thermal conductivity consuming the attributes of the Appell hypergeometric function. The impacts of the emerging parameters on the profiles are depicted through graphical representations and analytically constructed tables. Considering its usefulness in modulating temperature distribution in different industrial application, including solar collector design, electronic cooling, building ventilation, etc. According to our findings, the temperature profile exhibits an enhancement with the thermal radiation parameter and the viscous-elastic fluids. In addition, when compared to the classical Fourier's law of heat conduction, the temperature profile and thermal boundary layer thickness for the Cattaneo-Christov heat flux model are lower.
RESUMEN
In the present paper, an MHD three-dimensional non-Newtonian fluid flow over a porous stretching/shrinking sheet in the presence of mass transpiration and thermal radiation is examined. This problem mainly focusses on an analytical solution; graphene water is immersed in the flow of a fluid to enhance the thermal efficiency. The given non-linear PDEs are mapped into ODEs via suitable transformations, then the solution is obtained in terms of incomplete gamma function. The momentum equation is analyzed, and to derive the mass transpiration analytically, this mass transpiration is used in the heat transfer analysis and to find the analytical results with a Biot number. Physical significance parameters, including volume fraction, skin friction, mass transpiration, and thermal radiation, can be analyzed with the help of graphical representations. We indicate the unique solution at stretching sheet and multiple solution at shrinking sheet. The physical scenario can be understood with the help of different physical parameters, namely a Biot number, magnetic parameter, inverse Darcy number, Prandtl number, and thermal radiation; these physical parameters control the analytical results. Graphene nanoparticles are used to analyze the present study, and the value of the Prandtl number is fixed to 6.2. The graphical representations help to discuss the results of the present work. This problem is used in many industrial applications such as Polymer extrusion, paper production, metal cooling, glass blowing, etc. At the end of this work, we found that the velocity and temperature profile increases with the increasing values of the viscoelastic parameter and solid volume fraction; additionally, efficiency is increased for higher values of thermal radiation.
RESUMEN
The steady magnetohydrodynamics (MHD) incompressible hybrid nanofluid flow and mass transfer due to porous stretching surface with quadratic velocity is investigated in the presence of mass transpiration and chemical reaction. The basic laminar boundary layer equations for momentum and mass transfer, which are non-linear partial differential equations, are converted into non-linear ordinary differential equations by means of similarity transformation. The mass equation in the presence of chemical reaction is a differential equation with variable coefficients, which is transformed to a confluent hypergeometric differential equation. The mass transfer is analyzed for two different boundary conditions of concentration field that are prescribed surface concentration (PSC) and prescribed mass flux (PMF). The asymptotic solution of concentration filed for large Schmidt number is analyzed using Wentzel-Kramer-Brillouin (WKB) method. The parameters influence the flow are suction/injection, superlinear stretching parameter, porosity, magnetic parameter, hybrid nanofluid terms, Brinkman ratio and the effect of these are analysed using graphs.
RESUMEN
Motivated from numerous practical applications, the present theoretical and numerical work investigates the nonlinear magnetohydrodynamic (MHD) laminar boundary layer flow of an incompressible, viscous fluid over a porous stretching sheet in the presence of suction/injection (mass transpiration). The flow characteristics are obtained by solving the underlying highly nonlinear ordinary differential equation using homotopy analysis method. The effect of parameters corresponding to suction/injection (mass transpiration), applied magnetic field, and porous stretching sheet parameters on the nonlinear flow is investigated. The asymptotic limits of the parameters regarding the flow characteristics are obtained mathematically, which compare very well with those obtained using the homotopy analysis technique. A detailed numerical study of the laminar boundary layer flow in the vicinity of the porous stretching sheet in MHD and offers a particular choice of the parametric values to be taken in order to practically model a particular type of the event among suction and injection at the sheet surface.
RESUMEN
The present paper investigates the effect of a mathematical model describing the aforementioned process in which the ambient nanofluid in the presence of suction/injection and magnetic field are taken into consideration. The flow is induced by an infinite elastic sheet which is stretched along its own plane. The stretching/shrinking of the sheet is assumed to be proportional to the distance from the slit. The governing equations are reduced to a nonlinear ordinary differential equation by means of similarity transformation. The consequential nonlinear equation is solved analytically. Consequences show that the flow field can be divided into a near-field region and a far-field region. Suction on the surface plays an important role in the flow development in the near-field whereas the far-field is responsible mainly by stretching. The electromagnetic effect plays exactly the same role as the MHD, which is to reduce the horizontal flow resulting from stretching. It is shown that the behavior of the fluid flow changes with the change of the nanoparticles type. The present study throws light on the analytical solution of a class of laminar boundary layer equations arising in the stretching/shrinking sheet problem.