RESUMEN
The ability of triaryltelluronium salts to interact with N-halosuccinimides (NXS) through chalcogen bonding (ChB) in the solid state and in solution is demonstrated herein. Cocrystals of the triaryltelluronium bearing two CF3 electron-withdrawing groups per aryl ring with N-chloro-, N-bromo- and N-iodosuccinimide (respectively NCS, NBS and NIS) were analyzed by X-ray diffraction, evidencing a ChB between tellurium and the carbonyl group of NXS. This ChB was confirmed in solution by NMR spectroscopy, especially by 125Te NMR titration experiment, which allowed the determination of the association constant (Ka) between the telluronium and NBS. The so-obtained Ka value of 17.3±0.6â M-1 indicated a moderate interaction in solution because of the competitive role of the solvent. The strength of the Teâ â â O ChB was however sufficient enough to promote the catalytic halofunctionalization of aromatics and of alkenes such as the intra- and intermolecular haloalkoxylation and haloesterification of alkenes.
RESUMEN
In the last decade, biological processes involving halogen bond (HaB) as a leading interaction attracted great interest. However, although bound iodine atoms are considered powerful HaB donors, few iodinated new drugs were reported so far. Recently, iodinated 4,4'-bipyridines showed interesting properties as HaB donors in solution and in the solid state. In this paper, a study on the inhibition activity of seven halogenated 4,4'-bipyridines against malignant melanoma (MM) cell proliferation is described. Explorative dose/response proliferation assays were first performed with three 4,4'-bipyridines by using four MM cell lines and the normal BJ fibroblast cell line as control. Among them, the A375 MM cell line was the most sensitive, as determined by MTT assays, which was selected to evaluate the antiproliferative activity of all 4,4'-bipyridines. Significantly, the presence of an electrophilic iodine impacted the biological activity of the corresponding compounds. The 3,3',5,5'-tetrachloro-2-iodo-4,4'-bipyridine showed significant antiproliferation activity against the A375â cell line, and lower toxicity on BJ fibroblasts. Through in silico studies, the stereoelectronic features of possible sites determining the bioactivity were explored. These results pave the way for the utilization of iodinated 4,4'-bipyridines as templates to design new promising HaB-enabled inhibitors of MM cell proliferation.
Asunto(s)
Antineoplásicos , Proliferación Celular , Relación Dosis-Respuesta a Droga , Ensayos de Selección de Medicamentos Antitumorales , Melanoma , Humanos , Proliferación Celular/efectos de los fármacos , Melanoma/tratamiento farmacológico , Melanoma/patología , Antineoplásicos/farmacología , Antineoplásicos/química , Antineoplásicos/síntesis química , Relación Estructura-Actividad , Estructura Molecular , Halogenación , Piridinas/química , Piridinas/farmacología , Piridinas/síntesis química , Línea Celular TumoralRESUMEN
Telluronium salts [Ar2 MeTe]X were synthesized, and their Lewis acidic properties towards a number of Lewis bases were addressed in solution by physical and theoretical means. Structural X-ray diffraction analysis of 21 different salts revealed the electrophilicity of the Te centers in their interactions with anions. Telluroniums' propensity to form Lewis pairs was investigated with OPPh3 . Diffusion-ordered NMR spectroscopy suggested that telluroniums can bind up to three OPPh3 molecules. Isotherm titration calorimetry showed that the related heats of association in 1,2-dichloroethane depend on the electronic properties of the substituents of the aryl moiety and on the nature of the counterion. The enthalpies of first association of OPPh3 span -0.5 to -5â kcal mol-1 . Study of the affinity of telluroniums for OPPh3 by state-of-the-art DFT and ab-initio methods revealed the dominant Coulombic and dispersion interactions as well as an entropic effect favoring association in solution. Intermolecular orbital interactions between [Ar2 MeTe]+ cations and OPPh3 are deemed insufficient on their own to ensure the cohesion of [Ar2 MeTe â Bn ]+ complexes in solution (B=Lewis base). Comparison of Grimme's and Tkatchenko's DFT-D4/MBD-vdW thermodynamics of formation of higher [Ar2 MeTe â Bn ]+ complexes revealed significant molecular size-dependent divergence of the two methodologies, with MBD yielding better agreement with experiment.
RESUMEN
[This corrects the article DOI: 10.1039/D3SC00849E.].
RESUMEN
Chalcogen bonding (ChB) is the non-covalent interaction occurring between chalcogen atoms as Lewis acid sites and atoms or groups of atoms able to behave as Lewis bases through their lone pair or π electrons. Analogously to its sister halogen bonding, the high directionality of this interaction was implemented for precise structural organizations in the solid state and in solution. Regarding catalysis, ChB is now accepted as a new mode of activation as demonstrated by the increased number of examples in the last five years. In the family of ChB catalysts, those based on tellurium rapidly appeared to overcome their lighter sulfur and selenium counterparts. In this review, we highlight the Lewis acid properties of tellurium-based derivatives in solution and summarize the start-of-the-art of their applications in catalysis.
RESUMEN
BACKGROUND: Highly ordered chiral secondary structures as well as multiple (tunable) recognition sites are the keys to success of polysaccharide carbamate-based chiral selectors in enantioseparation science. Hydrogen bonds (HBs), dipole-dipole, and π-π interactions are classically considered the most frequent noncovalent interactions underlying enantioselective recognition with these chiral selectors. Very recently, halogen, chalcogen and π-hole bonds were also identified as interactions working in polysaccharide carbamate-based selectors to promote enantiomer distinction. On the contrary, the function of dispersion interactions in this field was not explored so far. RESULTS: The enantioseparation of chiral ferrocenes featuring chiral axis or chiral plane as stereogenic elements was performed by comparing five polysaccharide carbamate-based chiral columns, with the aim to identify enantioseparation outcomes that could be reasonably determined by dispersion forces, making available a reliable experimental data set for future theoretical studies to confirm the heuristic hypothesis. The effects of mobile phase polarity and temperature on the enantioseparation were considered, and potential recognition sites on analytes and selectors were evaluated by electrostatic potential (V) analysis and molecular dynamics (MD). In this first part, the enantioseparation of 3,3'-dibromo-5,5'-bis-ferrocenylethynyl-4,4'-bipyridine bearing two ferrocenylethynyl units linked to an axially chiral core was performed and compared to that of the analyte featuring the same structural motif with two phenyl groups in place of the ferrocenyl moieties. The results of this study showed the superiority of the ferrocenyl compared to the phenyl group, as a structural element favouring enantiodifferentiation. SIGNIFICANCE AND NOVELTY: Even if dispersion (London) forces have been envisaged acting in liquid-phase enantioseparations, focused studies to explore possible contributions of dispersion forces with polysaccharide carbamate-based selectors are practically missing. This study allowed us to collect experimental information that support the involvement of dispersion forces as contributors to liquid-phase enantioseparation, paving the way to a new picture in this field.
RESUMEN
In the field of noncovalent interactions, chalcogen bonding (ChB) involving the tellurium atom is currently attracting much attention in supramolecular chemistry and in catalysis. However, as a prerequisite for its application, the ChB should be studied in solution to assess its formation and, if possible, to evaluate its strength. In this context, new tellurium derivatives bearing CH2F and CF3 groups were designed to exhibit Teâ¯F ChB and were synthesized in good to high yields. In both types of compounds, Teâ¯F interactions were characterized in solution by combining 19F, 125Te and HOESY NMR techniques. These Teâ¯F ChBs were shown to contribute to the overall JTe-F coupling constants (94-170 Hz) measured in the CH2F- and CF3-based tellurium derivatives. Finally, a variable temperature NMR study allowed us to approximate the energy of the Teâ¯F ChB, from 3 kJ mol-1 for the compounds with weak Te σ-holes to 11 kJ mol-1 for Te σ-holes activated by the presence of strong electron withdrawing substituents.
RESUMEN
In the chalcogen series, tellurium species exhibit the strongest chalcogen bonding (ChB) interaction with electron-rich atom. This property explains the renewed interested toward tellurium-based derivatives and their use in different applications, such as organocatalysis. In this context, the catalytic activity of telluronium salts in the Povarov reaction is presented herein. Different dienophiles, as well as imines of variable electronic nature, efficiently react in the presence of catalytic amount of either diarylmethyltelluronium or triaryltelluronium salts. Both catalysts could also readily perform the three-component Povarov reaction starting from aldehyde, aniline and dihydrofuran. The reactivity of telluroniums towards imines and aldehydes was confirmed in the solid state by the ability of Te atom to interact through ChB with the oxygen carbonyl of acetone, and in solution with significant shift variations of the imine proton and of the tellurium atom in 1 H and 125 Te NMR spectroscopy. For the most active telluronium catalysts bearing CF3 groups, association constants (K) with N-phenyl phenylmethanimine in the range 22-38â M-1 were measured in dichloromethane.
RESUMEN
Chalcogen bonds (ChBs) occur between molecules containing Lewis acidic chalcogen substituents and Lewis bases. Recently, ChB emerged as a pivotal interaction in solution-based applications such as anion recognition, anion transport and catalysis. However, before moving to applications, the involvement of ChB must be established in solution. In this Concept article, we provide a brief review of the currently available experimental investigations of ChB in solution.
RESUMEN
In this study, the enantioseparation of 14 planar chiral ferrocenes containing halogen atoms, and methyl, iodoethynyl, phenyl, and 2-naphthyl groups, as substituents, was explored with a cellulose tris(4-methylbenzoate) (CMB)-based chiral column under multimodal elution conditions. n-Hexane/2-propanol (2-PrOH) 95:5 v/v, pure methanol (MeOH), and MeOH/water 90:10 v/v were used as mobile phases (MPs). With CMB, baseline enantioseparations were achieved for nine analytes with separation factors (α) ranging from 1.24 to 1.77, whereas only three analytes could be enantioseparated with 1.14 ≤ α ≤ 1.51 on a cellulose tris(3,5-dimethylphenylcarbamate) (CDMPC)-based column, used as a reference for comparison, under the same elution conditions. Pendant group-dependent reversal of the enantiomer elution order was observed in several cases by changing CMB to CDMPC. The impact of analyte and chiral stationary phase (CSP) structure, and MP polarity on the enantioseparation, was evaluated. The two cellulose-based CSPs featured by different pendant groups were also compared in terms of thermodynamics. For this purpose, enthalpy (ΔΔH°), entropy (ΔΔS°) and free energy (ΔΔG°) differences, isoenantioselective temperatures (Tiso ), and enthalpy/entropy ratios (Q), associated with the enantioseparations, were derived from van 't Hoff plots by using n-hexane/2-PrOH 95:5 v/v and methanol/water 90:10 v/v as MPs. With the aim to disclose the functions of the different substituents in mechanisms and noncovalent interactions underlying analyte-selector complex formation at molecular level, electrostatic potential (V) analysis and molecular dynamics simulations were used as computational techniques. On this basis, enantioseparations and related mechanisms were investigated by integrating theoretical and experimental data.
Asunto(s)
Carbamatos , Metanol , Metalocenos , Cromatografía Líquida de Alta Presión/métodos , Celulosa/química , Benzoatos , Agua , EstereoisomerismoRESUMEN
In the last decade, planar chiral ferrocenes have attracted a growing interest in several fields, particularly in asymmetric catalysis, medicinal chemistry, chiroptical spectroscopy and electrochemistry. In this frame, the access to pure or enriched enantiomers of planar chiral ferrocenes has become essential, relying on the availability of efficient asymmetric synthesis procedures and enantioseparation methods. Despite this, in enantioseparation science, these metallocenes were not comprehensively explored, and very few systematic analytical studies were reported in this field so far. On the other hand, enantioselective high-performance liquid chromatography has been frequently used by organic and organometallic chemists in order to measure the enantiomeric purity of planar chiral ferrocenes prepared by asymmetric synthesis. On these bases, this review aims to provide the reader with a comprehensive overview on the enantioseparation of planar chiral ferrocenes by discussing liquid-phase enantioseparation methods developed over time, integrating this main topic with the most relevant aspects of ferrocene chemistry. Thus, the main structural features of ferrocenes and the methods to model this class of metallocenes will be briefly summarized. In addition, planar chiral ferrocenes of applicative interest as well as the limits of asymmetric synthesis for the preparation of some classes of planar chiral ferrocenes will also be discussed with the aim to orient analytical scientists towards 'hot topics' and issues which are still open for accessing enantiomers of ferrocenes featured by planar chirality.
Asunto(s)
Compuestos Ferrosos , Metalocenos , Compuestos Ferrosos/química , Estereoisomerismo , Cromatografía Líquida de Alta Presión/métodosRESUMEN
The σ-hole interaction represents a noncovalent interaction between atoms with σ-hole(s) on their surface (such as halogens and chalcogens) and negative sites. Over the last decade, significant developments have emerged in applications where the σ-hole interaction was demonstrated to play a key role in the control over chirality. The aim of this review is to give a comprehensive overview of the current advancements in the use of σ-hole interactions in stereoselective processes, such as formation of chiral supramolecular assemblies, separation of enantiomers, enantioselective complexation and asymmetric catalysis.
Asunto(s)
Calcógenos , Halógenos , EstereoisomerismoRESUMEN
Planar chiral halogenated ferrocenes have come in useful as synthetic intermediates over the years, allowing for the preparation of functionalized derivatives for catalysis, material science, optoelectronics, and medicinal chemistry. Despite their chemical interest, few halogenated planar chiral ferrocenes have been prepared in enantiopure form by asymmetric synthesis so far. Enantioselective HPLC on polysaccharide-based chiral stationary phases (CSPs) has been used for resolving planar chiral ferrocenes making both enantiomers available. However, the enantioseparation of derivatives containing halogens or alkyl groups exclusively remains rather challenging. Given this context, in this study the enantioseparation of eleven dihalogenated planar chiral ferrocenes was systematically explored by using five polysaccharide-based CSPs under multimodal elution conditions. Baseline enantioseparations were achieved for nine analytes with separation factors (α) ranging from 1.15 to 1.66. Thermodynamic quantities associated with the enantioseparations were derived from van't Hoff plots, and for 1-halo-2-(iodoethynyl)ferrocenes (1-halogen = F, Cl, Br) halogen-dependent thermodynamic profiles were identified on a cellulose tris(3,5-dimethylphenylcarbamate)-based column. The impact of CSP structure and mobile phase (MP) polarity on the enantioseparation was evaluated. In addition, with the aim to unravel the functions of halogen substituents in mechanisms and noncovalent interactions underlying selector-selectand complex formation at molecular level, local electron charge density of specific molecular regions of the interacting partners were evaluated in terms of calculated electrostatic potential (V) and related source function (SF) contributions. On this basis, the impact of halogen type and position on the enantioseparation was investigated by correlating theoretical and experimental data.
Asunto(s)
Halógenos , Polisacáridos , Cromatografía Líquida de Alta Presión , Halógenos/química , Metalocenos , Polisacáridos/química , Electricidad Estática , EstereoisomerismoRESUMEN
The chalcogen bonding (ChB) ability of Te is studied in symmetrical diaryl ditellurides ArTeTeAr. Among the two Te σ-holes, the one along the less polarized Te-Te bond was calculated as the more electropositive. This counter-intuitive situation is due to the hyperconjugation contribution from Te lone pair to the σ* of the adjacent Te which coincides with σ-hole along the more polarized Te-Ar bond. ArTeTeAr showed notable structural features in the solid state as a result of intermolecular Teâ â â Te ChB, such as a Te4 rectangle through dimer aggregation or a triangular Te3 motif, where one Te interacts with both Te atoms of a neighboring molecule through both its σ-hole and lone pair, in a slightly frustrated geometry. Lewis acidity of ArTeTeAr was also evaluated by NMR with R3 PO as σ-hole acceptors in different solvents. Thus, 125 Te NMR allowed monitoring Teâ â â O interaction and delivering association constants (Ka ) for 1 : 1 adducts. The highest value of Ka =90â M-1 was measured for the adduct between ArTeTeAr bearing CF3 groups and Et3 PO in cyclohexane. Notably, by using nBu3 PO, Teâ â â O interaction was revealed by 19 F-1 H HOESY showing spatial proximity between CF3 and CH3 of nBu3 PO.
Asunto(s)
Calcógenos , Calcógenos/química , Espectroscopía de Resonancia Magnética , SolventesRESUMEN
This work reports a combined experimental and theoretical study on the new dibenzo-1,5-ditellurocine 2-Te in order to get an overview on the parameters controlling conformational change and to explain the differences with sulfur and selenium analogues. The preference of the boat conformer over the chair one is revealed by DFT calculations. For 2-Te, a ΔG value of about 3â kJ/mol was calculated, close to the value measured by NMR (5â kJ/mol). However, DFT calculations with implicit solvation effects could not clearly establish the presence of an intramolecular Te HC noncovalent interaction (NCI), as observed in the solid state. The Independent Gradient Model (IGM) methodology discloses an existent but probably not sufficiently discriminating Te HC NCI. It also confirms that van der Waals interactions between phenyl rings is a source of stabilization of the boat conformer. Furthermore, electrostatic potential analysis suggests that chalcogen bonds between Te σ-holes and solvent might play an important role.
Asunto(s)
Selenio , Modelos Teóricos , Conformación Molecular , Selenio/química , Solventes , Electricidad EstáticaRESUMEN
Planar chiral ferrocenes are well-known compounds that have attracted interest for application in synthesis, catalysis, material science, and medicinal chemistry for several decades. In spite of the fact that asymmetric synthesis procedures for obtaining enantiomerically enriched ferrocenes are available, sometimes, the accessible enantiomeric excess of the chiral products is unsatisfactory. In such cases and for resolution of racemic planar chiral ferrocenes, enantioselective high-performance liquid chromatography (HPLC) on polysaccharide-based chiral stationary phases (CSPs) has been used in quite a few literature articles. However, although moderate/high enantioselectivities have been obtained for planar chiral ferrocenes bearing polar substituents, the enantioseparation of derivatives containing halogens, or exclusively alkyl groups, remains rather challenging. In this study, the enantioseparation of ten planar chiral 1,2- and 1,3-disubstituted ferrocenes was explored by using five polysaccharide-based CSPs under multimodal elution conditions. Baseline enantioseparations were achieved for nine analytes with separation factors (α) ranging from 1.20 to 2.92. The presence of π-extended systems in the analyte structure was shown to impact affinity of the most retained enantiomer toward amylose-based selectors, observing retention times higher than 80 min with methanol-containing mobile phases (MPs). Electrostatic potential (V) analysis and molecular dynamics (MD) simulations were used in order to study interaction modes at the molecular level.
Asunto(s)
Amilosa , Polisacáridos , Amilosa/química , Cromatografía Líquida de Alta Presión/métodos , Metalocenos , Polisacáridos/química , EstereoisomerismoRESUMEN
Chalcogen bonding results from non-covalent interactions occurring between electrodeficient chalcogen atoms and Lewis bases. Among the chalcogens, tellurium is the strongest Lewis acid, but Te-based compounds are scarcely used as organocatalysts. For the first time, telluronium cations demonstrated impressive catalytic properties at low loadings in three benchmark reactions: the Friedel-Crafts bromination of anisole, the bromolactonization of ω-unsaturated carboxylic acids and the aza-Diels-Alder between Danishefsky's diene and imines. The ability of telluronium cations to interact with a Lewis base through chalcogen bonding was demonstrated on the basis of multi-nuclear (17 O, 31 P, and 125 Te) NMR analysis and DFT calculations.
RESUMEN
2'-(4-Pyridyl)- and 2'-(4-hydroxyphenyl)-TCIBPs (TCIBP = 3,3',5,5'-tetrachloro-2-iodo-4,4'-bipyridyl) are chiral compounds that showed interesting inhibition activity against transthyretin fibrillation in vitro. We became interested in their enantioseparation since we noticed that the M-stereoisomer is more effective than the P-enantiomer. Based thereon, we recently reported the enantioseparation of 2'-substituted TCIBP derivatives with amylose-based chiral columns. Following this study, herein we describe the comparative enantioseparation of both 2'-(4-pyridyl)- and 2'-(4-hydroxyphenyl)-TCIBPs on four cellulose phenylcarbamate-based chiral columns aiming to explore the effect of the polymer backbone, as well as the nature and position of substituents on the side groups on the enantioseparability of these compounds. In the frame of this project, the impact of subtle variations of analyte and polysaccharide structures, and mobile phase (MP) polarity on retention and selectivity was evaluated. The effect of temperature on retention and selectivity was also considered, and overall thermodynamic parameters associated with the analyte adsorption onto the CSP surface were derived from van 't Hoff plots. Interesting cases of enantiomer elution order (EEO) reversal were observed. In particular, the EEO was shown to be dependent on polysaccharide backbone, the elution sequence of the two analytes being P-M and M-P on cellulose and amylose tris(3,5-dimethylphenylcarbamate), respectively. In this regard, a theoretical investigation based on molecular dynamics (MD) simulations was performed by using amylose and cellulose tris(3,5-dimethylphenylcarbamate) nonamers as virtual models of the polysaccharide-based selectors. This exploration at the molecular level shed light on the origin of the enantiodiscrimination processes.
Asunto(s)
Simulación de Dinámica Molecular , Amilosa , Celulosa , Cromatografía Líquida de Alta Presión , Compuestos Heterocíclicos , Polisacáridos , EstereoisomerismoRESUMEN
Commercial 4,4'-bipyridine is a popular scaffold that is primarily employed as a linker in 3D self-assembled architectures such as metallo-organic frameworks or as a connector in 2D networks. The introduction of alkyl substituents on the bipyridine skeleton is instrumental when 4,4'-bipyridines are used as linkers to form 2D self-assembled patterns on surfaces. Here, several synthetic strategies to access 4,4'-bipyridines functionalized at various positions are described. These easily scalable reactions have been used to introduce a range of alkyl substituents at positions 2 and 2' or 3 and 3' and at positions 2,2' and 6,6' in the case of tetra-functionalization. Scanning tunneling microscopy studies of molecular monolayers physisorbed at the graphite-solution interface revealed different supramolecular patterns whose motifs are primarily dictated by the nature and position of the alkyl chains.
RESUMEN
The chalcogen bond (ChB) is a noncovalent interaction based on electrophilic features of regions of electron charge density depletion (σ-holes) located on bound atoms of group VI. The σ-holes of sulfur and heavy chalcogen atoms (Se, Te) (donors) can interact through their positive electrostatic potential (V) with nucleophilic partners such as lone pairs, π-clouds, and anions (acceptors). In the last few years, promising applications of ChBs in catalysis, crystal engineering, molecular biology, and supramolecular chemistry have been reported. Recently, we explored the high-performance liquid chromatography (HPLC) enantioseparation of fluorinated 3-arylthio-4,4'-bipyridines containing sulfur atoms as ChB donors. Following this study, herein we describe the comparative enantioseparation of three 5,5'-dibromo-2,2'-dichloro-3-selanyl-4,4'-bipyridines on polysaccharide-based chiral stationary phases (CSPs) aiming to understand function and potentialities of selenium σ-holes in the enantiodiscrimination process. The impact of the chalcogen substituent on enantioseparation was explored by using sulfur and non-chalcogen derivatives as reference substances for comparison. Our investigation also focused on the function of the perfluorinated aromatic ring as a π-hole donor recognition site. Thermodynamic quantities associated with the enantioseparation were derived from van't Hoff plots and local electron charge density of specific molecular regions of the interacting partners were inspected in terms of calculated V. On this basis, by correlating theoretical data and experimental results, the participation of ChBs and π-hole bonds in the enantiodiscrimination process was reasonably confirmed.