RESUMEN
Remote thermal sensing has emerged as a temperature detection technique for tasks in which standard contact thermometers cannot be used due to environment or dimension limitations. One of such challenging tasks is the measurement of temperature in microelectronics. Here, optical thermometry using co-doped and mixed dual-center Gd2O3:Tb3+/Eu3+samples were realized. Ratiometric approach based on monitoring emission intensities of Tb3+(5D4-7F5) and Eu3+(5D0-7F2) transition provided sensing in the range of 30 °C-80 °C. Dispersion system type only slightly affected relative sensitivity, accuracy and precision. The applicability of phosphors synthesized to be utilized as remote optical thermometers for microelectronics has been proved with an example on a surface mount resistor and microcontroller.
RESUMEN
When navigated by the available energy of a system, often provided in the form of heat, physical processes or chemical reactions fleet on a free-energy landscape, thus changing the structure. In in situ transmission electron microscopy (TEM), where material structures are measured and manipulated inside the microscope while being subjected to external stimuli such as electrical fields, laser irradiation, or mechanical stress, it is necessary to precisely determine the local temperature of the specimen to provide a comprehensive understanding of material behavior and to establish the relationship among energy, structure, and properties at the nanoscale. Here, we propose using cathodoluminescence (CL) spectroscopy in TEM for in situ measurement of the local temperature. Gadolinium oxide particles doped with emissive europium ions present an opportunity to utilize them as a temperature probe in CL measurements via a ratiometric approach. We show the thermometric performance of the probe and demonstrate a precision of ±5 K in the temperature range from 113 to 323 K with the spatial resolution limited by the size of the particles, which surpasses other methods for temperature determination. With the CL-based thermometry, we further demonstrate measuring local temperature under laser irradiation.
RESUMEN
In this paper, we present a new methodology for creating 3D ordered porous nanocomposites based on anodic aluminum oxide template with polyaniline (PANI) and silver NPs. The approach includes in situ synthesis of polyaniline on templates of anodic aluminum oxide nanomembranes and laser-induced deposition (LID) of Ag NPs directly on the pore walls. The proposed method allows for the formation of structures with a high aspect ratio of the pores, topological ordering and uniformity of properties throughout the sample, and a high specific surface area. For the developed structures, we demonstrated their effectiveness as non-enzymatic electrochemical sensors on glucose in a concentration range crucial for medical applications. The obtained systems possess high potential for miniaturization and were applied to glucose detection in real objects-laboratory rat blood plasma.
RESUMEN
In the last decade much attention has been paid to the development of novel approaches in luminescence thermometry, which could allow contactless and noninvasive temperature sensing when traditional thermometers are useless. Typically, an optical thermometer exploits a distinct luminescence parameter to define temperature. However, the use of multimode sensors can significantly broaden the working range and improve the reliability of the temperature measurements. In this work, a Eu3+-doped LaVO4 sample was successfully utilized as a thermal sensor within a wide temperature range of 98-723 K based on monitoring various temperature-sensitive luminescence features. Different thermal sensing strategies were assessed and compared in terms of thermal sensitivity and temperature resolution. The best thermometric performances of the Eu3+-doped LaVO4 sensor reached an Sr = 1.49% K-1 and a ΔT = 0.6 K at room temperature. All the studies performed showed that the LaVO4:Eu3+ phosphor is a prospective multimode optical thermometer.
RESUMEN
Single doped CaWO4:Er3+phosphors were synthesized and studied for application of optical thermal sensing within a wide range of 98-773 K. Ratiometric strategy utilizing two luminescence intensity ratios, one between host and Er3+band (LIR1) and second between different Er3+transitions (LIR2), results in self-referencing temperature readouts. The presence of two temperature-dependent parameters could improve thermometric characteristics and broaden the working temperature range compared to a usual single-parameter thermometer. Thermometric performances of prepared samples were evaluated in terms of thermal sensitivities, temperature resolution and repeatability. The highest sensitivity of 2.09% K-1@300 K was found for LIR1, whereas LIR2provided more accurate thermal sensing with a temperature resolution of 0.06-0.1 K. Effect of Er3+doping concentration on sensing properties were studied. The presented findings indicate that CaWO4:Er3+phosphors are perspective in dual-mode thermal sensing with high sensitivity and sub-degree resolution.
RESUMEN
Crystalline inorganic nanoparticles doped with rare earth ions are widely used in a variety of scientific and industry applications due to the unique spectroscopic properties. The temperature dependence of their luminescence parameters makes them promising candidates for self-referencing thermal sensing. Here we report single phase YVO4 nanoparticles doped with different pairs of rare earth ions (Nd3+/Er3+, Tm3+/Er3+ and Nd3+/Tm3+) for contactless ratiometric thermometry within a wide temperature range of 298-573 K. The presence of dual luminescence centers in the optical thermometer allows one to circumvent the fundamental limitation of sensitivity inherent to thermometers based on thermally coupled levels. Important parameters for temperature sensing, such as relative thermal sensitivity and temperature resolution, were calculated for all synthesized samples and compared with the literature data. The YVO4:Tm3+,Er3+ sample displayed a relative sensitivity of 0.28% K-1 at room temperature, and the YVO4:Nd3+,Er3+ phosphor exhibited a high sensitivity of 0.56% K-1 at 573 K, while YVO4:Nd3+,Tm3+ demonstrated sub-degree thermal resolution. These findings demonstrate the good potential of dual-center ratiometric YVO4 thermometers and open the way toward future enhancement of their thermometric performances through variation of the doping concentration.
RESUMEN
Optical materials doped with several lanthanides are unique in their properties and are widely used in various fields of science and technology. The study of these systems provides solutions for noncontact thermometry, bioimaging, sensing technology, and others. In this paper, we report on the demonstration of YVO4 nanoparticles doped with one, two, and three different rare earth ions (Tm3+, Er3+, and Nd3+). We discuss the morphology, structural properties, and luminescence behavior of particles. Luminescence decay kinetics reveal the energy transfer efficiency (up to 78%) for different ions under the selective excitation of individual ions. Thus, we found that the energy transition from Tm3+ is more favorable than from Er3+ while we did not observe any significant energy rearrangement in the samples under the excitation of Nd3+. The observed strong variation of REI lifetimes makes the suggested nanoparticles promising for luminescent labeling, anticounterfeiting, development of data storage systems, etc.
RESUMEN
We present an efficient and easily implemented approach for creating stable electrocatalytically active nanocomposites based on polyaniline (PANI) with metal NPs. The approach combines in situ synthesis of polyaniline followed by laser-induced deposition (LID) of Ag, Pt, and AgPt NPs. The observed peculiarity of LID of PANI is the role of the substrate during the formation of multi-metallic nanoparticles (MNP). This allows us to solve the problem of losing catalytically active particles from the electrode's surface in electrochemical use. The synthesized PANI/Ag, PANI/Pt, and PANI/AgPt composites were studied with different techniques, such as SEM, EDX, Raman spectroscopy, and XPS. These suggested a mechanism for the formation of MNP on PANI. The MNP-PANI interaction was demonstrated, and the functionality of the nanocomposites was studied through the electrocatalysis of the hydrogen evolution reaction. The PANI/AgPt nanocomposites demonstrated both the best activity and the most stable metal component in this process. The suggested approach can be considered as universal, since it can be extended to the creation of electrocatalytically active nanocomposites with various mono- and multi-metallic NPs.
RESUMEN
Multimetallic plasmonic systems usually have distinct advantages over monometallic nanoparticles due to the peculiarity of the electronic structure appearing in advanced functionality systems, which is of great importance in a variety of applications including catalysis and sensing. Despite several reported techniques, the controllable synthesis of multimetallic plasmonic nanoparticles in soft conditions is still a challenge. Here, mono-, bi- and tri-metallic nanoparticles were successfully obtained as a result of a single step laser-induced deposition approach from monometallic commercially available precursors. The process of nanoparticles formation is starting with photodecomposition of the metal precursor resulting in nucleation and the following growth of the metal phase. The deposited nanoparticles were studied comprehensively with various experimental techniques such as SEM, TEM, EDX, XPS, and UV-VIS absorption spectroscopy. The size of monometallic nanoparticles is strongly dependent on the type of metal: 140-200 nm for Au, 40-60 nm for Ag, 2-3 nm for Pt. Bi- and trimetallic nanoparticles were core-shell structures representing monometallic crystallites surrounded by an alloy of respective metals. The formation of an alloy phase took place between monometallic nanocrystallites of different metals in course of their growth and agglomeration stage.
RESUMEN
Surfaces functionalized with metal nanoparticles (NPs) are of great interest due to their wide potential applications in sensing, biomedicine, nanophotonics, etc. However, the precisely controllable decoration with plasmonic nanoparticles requires sophisticated techniques that are often multistep and complex. Here, we present a laser-induced deposition (LID) approach allowing for single-step surface decoration with NPs of controllable composition, morphology, and spatial distribution. The formation of Ag, Pt, and mixed Ag-Pt nanoparticles on a substrate surface was successfully demonstrated as a result of the LID process from commercially available precursors. The deposited nanoparticles were characterized with SEM, TEM, EDX, X-ray diffraction, and UV-VIS absorption spectroscopy, which confirmed the formation of crystalline nanoparticles of Pt (3-5 nm) and Ag (ca. 100 nm) with plasmonic properties. The advantageous features of the LID process allow us to demonstrate the spatially selective deposition of plasmonic NPs in a laser interference pattern, and thereby, the formation of periodic arrays of Ag NPs forming diffraction grating.
RESUMEN
The development of new contactless thermal nanosensors based on a ratiometric approach is of significant interest. To overcome the intrinsic limitations of thermally coupled levels, a dual activation strategy was applied. Dual activation was performed using co-doped single nanoparticles and a binary mixture of single-doped nanoparticles. Co-doped and mixed YVO4:Nd3+/Eu3+ nanoparticles were successfully demonstrated as luminescent nanothermometers and their thermometric performance, in terms of thermal sensitivity, temperature resolution and repeatability, was studied and compared.