RESUMEN
The human brain efficiently processes only a fraction of visual information, a phenomenon termed attentional control, resulting in energy savings and heightened adaptability. Translating this mechanism into artificial visual neurons holds promise for constructing energy-efficient, bioinspired visual systems. Here, we propose a self-rectifying artificial visual neuron (SEVN) based on a NiO/Ga2O3 bipolar heterojunction with attentional control on patterns with a target color. The device exhibits short-term potentiation (STP) with quantum point contact (QPC) traits at low bias and transitions to long-term potentiation (LTP) at high bias, particularly facilitated by electron capture in deep defects upon ultraviolet (UV) exposure. With the utilization of two wavelengths of light upon the target and interference part of CAPTCHA to simulate top-down attentional control, the recognition accuracy is enhanced from 74 to 84%. These findings have the potential to augment the visual capability of neuromorphic systems with implications for diverse applications, including cybersecurity, healthcare, and machine vision.
Asunto(s)
Encéfalo , Sinapsis , Humanos , Sinapsis/fisiología , NeuronasRESUMEN
The cone photoreceptors in our eyes selectively transduce the natural light into spiking representations, which endows the brain with high energy-efficiency color vision. However, the cone-like device with color-selectivity and spike-encoding capability remains challenging. Here, we propose a metal oxide-based vertically integrated spiking cone photoreceptor array, which can directly transduce persistent lights into spike trains at a certain rate according to the input wavelengths. Such spiking cone photoreceptors have an ultralow power consumption of less than 400 picowatts per spike in visible light, which is very close to biological cones. In this work, lights with three wavelengths were exploited as pseudo-three-primary colors to form 'colorful' images for recognition tasks, and the device with the ability to discriminate mixed colors shows better accuracy. Our results would enable hardware spiking neural networks with biologically plausible visual perception and provide great potential for the development of dynamic vision sensors.
Asunto(s)
Visión de Colores , Células Fotorreceptoras Retinianas Conos , Percepción de Color , Percepción Visual , Luz , ColorRESUMEN
The biological visual system encodes optical information into spikes and processes them by the neural network, which enables the perception with high throughput of visual processing with ultralow energy budget. This has inspired a wide spectrum of devices to imitate such neural process, while precise mimicking such procedure is still highly required. Here, a highly bio-realistic photoelectric spiking neuron for visual depth perception is presented. The firing spikes generated by the TaOX memristive spiking encoders have a biologically similar frequency range of 1-200 Hz and sub-micro watts power. Such spiking encoder is integrated with a photodetector and a network of neuromorphic transistors, for information collection and recognition tasks, respectively. The distance-dependent response and eye fatigue of biological visual systems have been mimicked based on such photoelectric spiking neuron. The simulated depth perception shows a recognition improvement by adapting to sights at different distances. The results can advance the technologies in bioinspired or robotic systems that may be endowed with depth perception and power efficiency at the same time.
Asunto(s)
Redes Neurales de la Computación , Neuronas , Percepción de Profundidad , Neuronas/fisiología , Percepción VisualRESUMEN
Emerging memory devices, that can provide programmable information recording with tunable resistive switching under external stimuli, hold great potential for applications in data storage, logic circuits, and artificial synapses. Realization of multifunctional manipulation within individual memory devices is particularly important in the More-than-Moore era, yet remains a challenge. Here, both rewritable and nonerasable memory are demonstrated in a single stimuli-responsive polymer diode, based on a nanohole-nanowrinkle bi-interfacial structure. Such synergic nanostructure is constructed from interfacing a nanowrinkled bottom graphene electrode and top polymer matrix with nanoholes; and it can be easily prepared by spin coating, which is a low-cost and high-yield production method. Furthermore, the resulting device, with ternary and low-power operation under varied external stimuli, can enable both reversible and irreversible biomimetic pressure recognition memories using a device-to-system framework. This work offers both a general guideline to fabricate multifunctional memory devices via interfacial nanostructure engineering and a smart information storage basis for future artificial intelligence.
RESUMEN
Carbon dots (C-dots) are promising and widely applied carbon fluorescent materials for next-generation white light-emitting diodes (WLEDs). However, nonnegligible thermal quenching issues induced by high working temperature of high-power WLEDs severely limit the further development of C-dot phosphors. In this paper, we report an efficient strategy to improve thermal dissipation within C-dot phosphors to solve the thermal quenching problem. C-dots/hexagonal boron nitride nanosheet (BNNS) hybrid nanostructures have been firstly prepared through an electrostatic assembly method. Owing to the effective heat transfer channels established by C-dots/BNNS in a polymer matrix, heat could be dissipated efficiently and the working temperature of WLEDs is reduced by 29 °C, suggesting excellent thermal quenching-resistance properties. Particularly, the hybrids show thermally stable emission without obvious emission loss up to 100 °C. Moreover, the C-dots/BNNS-WLEDs still maintain a high color rendering index of Ra > 89, revealing that the present strategy could promote the exploration of carbon phosphors with thermal quenching resistance for high-quality LED applications.
RESUMEN
We report the design and preparation of hierarchical hollow-pore nanostructure bilayer conjugated polymer films for high-performance resistive memory devices. By taking the merits of chemical and structural stabilities of a two-dimensional conjugated microporous polymer (2D CMP), a poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) film with a hollow surface was spin-coated onto 2D CMP nanofilm directly, constructing a bilayer heterojunction. A two-terminal diode with a configuration of indium tin oxide/2D CMP/hollow MEH-PPV/Al was fabricated by employing the prepared bilayer heterojunction. The device poses flash feature with a high on/off ratio (>105) and a long retention time (>3.0 × 104 s), which is higher than that of most of the reported conjugated polymers memories. Our work offers a general guideline to construct high on/off ratio polymer memories via hierarchical nanostructure engineering in memristive layer.
RESUMEN
MXenes, an emerging class of two-dimensional (2D) transition-metal carbide materials, have received increasing attention for their interesting physiochemical properties. For not only MXenes but also other 2D materials, delamination is a requisite step for the exploitation of their unique properties. In this work, a facile method for exfoliating Ti3C2Tx MXene to nanosheets of small size with the aid of poly(vinylpyrrolidone) (PVP) is designed, which has never been reported to our knowledge. Since both hydrophobic methylene groups and hydrophilic amide groups are provided with PVP, this method is applicable in a wide range of solvents, such as ethanol, water, and chloroform. Considering the charge detrapping and trapping behavior of 2D transition-metal materials in PVP dielectric, a memory device with the configuration of reduced graphene oxide (rGO)/Ti3C2Tx-PVP/Au is directly fabricated with these well-dispersed Ti3C2Tx-PVP composites by the solution process technique. Interestingly, the resultant device exhibits a typical bistable electrical switching, ultralow switching voltage (â¼0.9 V), and a nonvolatile rewritable memory effect with the function of flash. This work might pave the way of using MXenes for future data storage, which is an indispensable field nowadays.
RESUMEN
Building stretchable memory is an effective strategy for developing next-generation memory technologies toward stretchable and wearable electronics. Here we demonstrate a universal strategy for the fabrication of high performance stretchable polymer memory via tailoring surface morphology, in which common conjugated polymers and sharp reduced graphene oxide (r-rGO) films are used as active memristive layers and conductive electrodes, respectively. The fabricated devices feature write-once-read-many-times (WORM) memory, with a low switching voltage of 1.1 V, high ON/OFF current ratio of 104, and an ideal long retention time over 12000 s. Sharp surface-induced resistive switching behavior has been proposed to explore the electrical transition. Moreover, the polymer memory show reliable electrical bistable properties with a stretchability up to 30%, demonstrating their great potential candidates as high performance stretchable memory in soft electronics.
RESUMEN
Multicolor carbon phosphors as emerging light conversion materials, with full recyclability and stable color convertibility, are poised to accelerate the sustainable development of environment-friendly optoelectronics. Herein, we firstly report a facile strategy, combining single-step hydrothermal and differential washing methods, for the preparation of multicolor carbon emitters with nano-dot/micro-belt structures. The as-prepared hybrids exhibit excellent film-forming ability and demonstrate controllable multicolor solid-state luminescence ranging from white and green to blue light emission, by utilizing the synergistic effect between nano-dot and micro-belt structures. Particularly, the hybrid white emitters possess a robust ability of being fully recyclable without any performance degradation and formation of harmful byproducts. Moreover, light-emitting devices (LEDs) coated with the hybrid emitters show stable voltage-independent luminescence behavior in lighting applications. This work provides a simple route to modulate the optical properties of multicolor carbon-based emitters and shows great potential in the sustainable development of lighting-related products.
RESUMEN
Two-dimensional carbon semiconductors have aroused great attention due to their unique structures and novel properties, showing potential applications in emerging electronic and optoelectronic devices. In this work, we reported an effective strategy to controllable prepare ultrathin carbon nanofilms (CNFs) by combining in situ-growth and stepwise thermal annealing, with the features of large-area, tunable properties and nanoscale thickness. The structures, morphologies and electrical properties of these as-prepared CNFs were characterized systematically. Impressively, tunable electrical properties from low to semi- and high conductivity could be precisely achieved through stepwise annealing of conjugated microporous polymer films. By introducing CNF-750 as the active channel layer, the transistor exhibited a typical p-type semiconductor property. Moreover, by further coupling CNF-750 with carbon dots (CDs) as a photoresponse layer, the as-fabricated all-carbon diode based on CDs/CNF-750 heterostructure film showed high ultraviolet (UV) light response.
RESUMEN
Building transient and flexible memristors is a promising strategy for developing emerging memory technologies. Here, a transient and flexible memristor based on a polymer nanocomposite, with a configuration of silver nanowire (AgNW)/citric acid quantum dot (CA QD)-polyvinyl pyrrolidone (PVP)/AgNW, is fabricated using a full-solution process method. The obtained device exhibits reversible resistive switching behavior and a dynamic random access memory (DRAM) storage feature, with the significant merits of a high ON/OFF ratio, low switching voltage, excellent reproducibility and desirable high flexibility, indicating outstanding memory characteristics such as low misreading, low power operation and low cost potential. Moreover, an operating mechanism of charge trapping/de-trapping of the quantum dots in the polymer matrix has been proposed. Importantly, the memristor can be disintegrated in water within 30 minutes, showing that it is a promising candidate for transient memories. This work paves a new way for potential use of this material in transient electronics, implanted electronics, data storage security and flexible electronic systems.