Boron nanosheets boosting solar thermal water evaporation.

Hydrogel-based solar vapour generators (SVGs) are promising for wastewater treatment and desalination. The performance of SVG systems is governed by solar thermal conversion and water management. Progress has been made in achieving high energy conversion efficiency, but the water evaporation rates are still unsatisfactory under 1 sun irradiation. This study introduced novel two-dimensional (2D) boron nanosheets as additives into hydrogel-based SVGs. The resulting SVGs exhibit an outstanding evaporation rate of 4.03 kg m-2 h-1 under 1 sun irradiation. This significant improvement is attributed to the 2D boron nanosheets, which leads to the formation of a higher content of intermediate water and reduced water evaporation enthalpy to 845.11 kJ kg-1. The SVGs into which boron nanosheets were incorporated also showed high salt resistance and durability, demonstrating their great potential for desalination applications.

Synthesizing cationic polymers and tuning their properties for microalgae harvesting.

This study reports a facile technique to synthesize and tune the cationic polymer, poly(3-acrylamidopropyl)trimethylammonium chloride (PAPTAC), in terms of molecular weight and surface change for harvesting three microalgae species (Scenedesmus sp., P.purpureum, and C. vulgaris). The PAPTAC polymer was synthesised by UV-induced free-radical polymerisation. Polymer tuning was demonstrated by regulating the monomer concentration (60 to 360 mg/mL) and UV power (36 and 60 W) for polymerisation. The obtained PAPTAC polymer was evaluated for harvesting three different microalgae species and compared to a commercially available polymer. The highest flocculation efficiency for Scenedesmus sp. and P. purpureum was observed at a dosage of 25 mg-polymer/g of dry biomass by using PAPTAC-90, resulting in higher flocculation efficiency than the commercial polymer. Results in this study show evidence of effective neutralisation of the negative charge surface of microalgae cells by the produced cationic PAPTAC polymer and polymer bridging for effective flocculation. The obtained PAPTAC polymer was less effective for harvesting C. vulgaris, possibly due to other factors such as cell morphology and composition of extracellular polymeric substances of at the cell membrane that may also influence harvesting performance.

Structure-Property Relationships of Hydrogel-based Atmospheric Water Harvesting Systems.

Atmospheric water harvesting (AWH) is considered one of the promising technologies to alleviate the uneven-distribution of water resources and water scarcity in arid regions of the world. Hydrogel-based AWH materials are currently attracting increasing attention due to their low cost, high energy efficiency and simple preparation. However, there is a knowledge gap in the screening of hydrogel-based AWH materials in terms of structure-property relationships, which may increase the cost of trial and error in research and fabrication. In this study, we synthesised a variety of hydrogel-based AWH materials, characterized their physochemcial properties visualized the electrostatic potential of polymer chains, and ultimately established the structure-property-application relationships of polymeric AWH materials. Poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPS) hydrogel is able to achieve an excellent water adsorption capacity of 0.62 g g-1 and a high water desorption efficiency of more than 90 % in relatively low-moderate humidity environments, which is regarded as one of the polymer materials with potential for future AWH applications.

MicroRNA-124-3p Attenuated Retinal Neovascularization in Oxygen-Induced Retinopathy Mice by Inhibiting the Dysfunction of Retinal Neuroglial Cells through STAT3 Pathway.

MicroRNA (miRNA) is a non-coding RNA that can regulate the expression of many target genes, and it is widely involved in various important physiological activities. MiR-124-3p was found to associate with the normal development of retinal vessels in our previous study, but the mechanism of its anti-angiogenic effect on pathological retinal neovascularization still needed to be explored. Therefore, this study aimed to investigate the effect and mechanism of miR-124-3p on retinal neovascularization in mice with oxygen-induced retinopathy (OIR). Here, we found that intravitreal injection of miR-124-3p agomir attenuated pathological retinal neovascularization in OIR mice. Moreover, miR-124-3p preserved the astrocytic template, inhibited reactive gliosis, and reduced the inflammatory response as well as necroptosis. Furthermore, miR-124-3p inhibited the signal transducer and activator of transcription 3 (STAT3) pathway and decreased the expression of hypoxia-inducible factor-1α and vascular endothelial growth factor. Taken together, our results revealed that miR-124-3p inhibited retinal neovascularization and neuroglial dysfunction by targeting STAT3 in OIR mice.

Downregulation of miR-124-3p suppresses the development of the deep retinal blood vessels by enhancing the Stat1/Ripk1 pathway in mouse retinal microglia.

The study aimed to investigate the role of microRNA (miR)-124-3p in retinal angiogenesis in a mouse model. An intravitreal injection of miR-124-3p antagomir was used to knockdown the expression of miR-124-3p in the mouse retina at postnatal day (P)3. Immunofluorescent staining of both retinal frozen sections and whole retina were used to observe retinal vascular development in the P6, P9 and P12 mice, as well as the changes in retinal ganglion cells, astrocytes, Müller cells and microglia. Whole retinal RNA extracted from P9 mice was used for transcriptome sequencing. Following gene set enrichment analysis, the enriched genes caused by miR-124-3p inhibition were analyzed by immunofluorescent staining and western blot. Results indicated that deep vascular development was significantly inhibited by the activation of M1 phenotype microglia. Moreover, there were no notable effects on superficial retinal vascular development, the retinal ganglion cells, astrocytes, and Müller cells. The expression of the Stat1/Irf9/Eif2ak2/Ripk1 axis in the miR-124-3p knockdown group was significantly increased. The microglia penetrated deep into the retina and the activation of Ripk1(+) microglia significantly increased, which was accompanied by an increased level of apoptosis to inhibit the deep vascular sprout. Downregulation of miR-124-3p during the early retinal development can suppress the development of the deep retinal blood vessels by enhancing the expression level of the Stat1/Irf9/Eif2ak2/Ripk1 axis and inducing the cell apoptosis of the activation of Ripk1(+) microglia.

Divide and Conquer: A Novel Dual-Layered Hydrogel for Atmospheric Moisture Harvesting.

Atmospheric water harvesting (AWH) has been recognized as a next-generation technology to alleviate water shortages in arid areas. However, the current AWH materials suffer from insufficient water adsorption capacity and high-water retention, which hinder the practical application of AWH materials. In this study, we developed a novel dual-layered hydrogel (DLH) composed of a light-to-heat conversion layer (LHL) containing novel polydopamine-manganese nanoparticles (PDA-Mn NPs) and a water adsorption layer (WAL) made of 2-(acryloyloxyethyl) trimethylammonium chloride (AEtMA). The WAL has a strong ability to adsorb water molecules in the air and has a high-water storage capacity, and the PDA-Mn NPs embedded in the LHL have excellent photothermal conversion efficiency, leading to light-induced autonomous water release. As a result, the DLH displays a high-water adsorption capacity of 7.73 g g-1 under optimal conditions and could near-quantitatively release captured water within 4 h sunlight exposure. Coupled with its low cost, we believed that the DLH will be one of the promising AWH materials for practical applications.

MicroRNA-92a-3p Regulates Retinal Angiogenesis by Targeting SGK3 in Vascular Endothelial Cells.

Purpose: The purpose of this study was to investigate the effects and mechanism of microRNA (miR)-92a-3p in retinal angiogenesis in vitro and in vivo. Methods: The expression of miR-92a-3p was verified by real-time quantitative polymerase chain reaction (RT-qPCR). Agomir-92a-3p was intravitreally injected into the right eye on postnatal day 3 (P3), P5, and P8 in the mice, with the agomir-NC injected left eye as the control. At P7, P9, and P12, immunofluorescence was performed to examine the retinal superficial vascular plexus, deep vascular plexus, proliferation, and apoptosis in retinal vascular endothelial cells (ECs). Human retinal microvascular endothelial cells (HRMECs) were treated with mimic-NC and mimic-92a-3p, then the tube formation, cell migration, and wound healing assays were used to detect the effect of miR-92a-3p on retinal angiogenesis in vitro. Agomir-92a-3p was also intravitreally injected into the right eye of oxygen-induced retinopathy (OIR) mice at P12, with the agomir-NC injected left eye as the control, the neovascularization was observed by retinal flatmount staining with isolectin B4 at P17. Bioinformatics and high-throughput sequencing were performed to identify potential target genes of miR-92a-3p. RT-qPCR and Western blot were carried out to detect the expression of SGK3, p-GSK3ß, GSK3ß, Bcl-xL, and cleaved caspase-3 in the HRMECs and mouse retinas. Results: The overexpression of miR-92a-3p inhibited the development of retinal superficial vascular plexus and deep vascular plexus, decreased the expression of Ki67, and increased the expression of cleaved caspase-3 in isolectin B4-labeled retinal vascular ECs. In vitro, the overexpression of miR-92a-3p markedly suppressed the tube formation, cell migration, and wound healing of cultured ECs. Overexpression of miR-92a-3p inhibited both in vivo and in vitro physiological angiogenesis by downregulating the expression of SGK3, p-GSK3ß/GSK3ß, and Bcl-xL. In addition, agomir-92a-3p inhibited the pathological retinal neovascularization of OIR mice, by targeting SGK3, p-GSK3ß/GSK3ß, and Bcl-xL. Conclusions: The miR-92a-3p could affect retinal angiogenesis by targeting SGK3 pathway, suggesting that miR-92a-3p may be a potential anti-angiogenic factor for retinal vascular disease.

Water Harvesting Strategies through Solar Steam Generator Systems.

Solar steam generator (SSG) systems have attracted increasing attention, owing to its simple manufacturing, material abundance, cost-effectiveness, and environmentally friendly freshwater production. This system relies on photothermic materials and water absorbing substrates for a clean continuous distillation process. To optimize this process, there are factors that are needed to be considered such as selection of solar absorber and water absorbent materials, followed by micro/macro-structural system design for efficient water evaporation, floating, and filtration capability. In this contribution, we highlight the general interfacial SSG concept, review and compare recent progresses of different SSG systems, as well as discuss important factors on performance optimization. Furthermore, unaddressed challenges such as SSG's cost to performance ratio, filtration of untreatable micropollutants/microorganisms, and the need of standardization testing will be discussed to further advance future SSG studies.

Proteomic Analysis of Retinal Conditioned Medium: The Effect on Early Differentiation of Embryonic Stem Cells into Retina.

Stem cell replacement therapy has emerged as one of the most promising treatment options for retinal degenerative diseases, which are the main causes of irreversible vision loss. Three-dimensional (3D) retinal organoid culture is a cutting-edge technology for differentiating embryonic stem cells into retinal cells by forming a laminated retinal structure. However, 3D culture systems have strict requirements with respect to the experimental environment and culture technologies. Our study aimed to investigate the effect of retinal conditioned medium (RCM) at different developmental stages on the early differentiation of embryonic stem cells into retina in a 3D culture system. In this study, we added RCM to the 3D culture system and found that it could promote the differentiation of mouse embryonic stem cells (mESCs) into neuroretina. We further explored the possible mechanisms of RCM that regulate differentiation through proteomic analysis. RCM at different time points disclosed different protein profiles. Proteins which improved energy metabolism of mESCs might help improve the viability of embryonic bodies. We then screened out Snap25, Cntn1, Negr1, Dpysl2, Dpysl3, and Crmp1 as candidate proteins that might play roles in the differentiation and neurogenesis processes of mESCs, hoping to provide a basis for optimizing a retinal differentiation protocol from embryonic stem cells.

An Interaction-Based Method for Refining Results From Gene Set Enrichment Analysis.

Purpose: To demonstrate an interaction-based method for the refinement of Gene Set Enrichment Analysis (GSEA) results. Method: Intravitreal injection of miR-124-3p antagomir was used to knockdown the expression of miR-124-3p in mouse retina at postnatal day 3 (P3). Whole retinal RNA was extracted for mRNA transcriptome sequencing at P9. After preprocessing the dataset, GSEA was performed, and the leading-edge subsets were obtained. The Apriori algorithm was used to identify the frequent genes or gene sets from the union of the leading-edge subsets. A new statistic d was introduced to evaluate the frequent genes or gene sets. Reverse transcription quantitative PCR (RT-qPCR) was performed to validate the expression trend of candidate genes after the knockdown of miR-124-3p. Results: A total of 115,140 assembled transcript sequences were obtained from the clean data. With GSEA, the NOD-like receptor signaling pathway, C-type-like lectin receptor signaling pathway, phagosome, necroptosis, JAK-STAT signaling pathway, Toll-like receptor signaling pathway, leukocyte transendothelial migration, chemokine signaling pathway, NF-kappa B signaling pathway and RIG-I-like signaling pathway were identified as the top 10 enriched pathways, and their leading-edge subsets were obtained. After being refined by the Apriori algorithm and sorted by the value of the modulus of d , Prkcd, Irf9, Stat3, Cxcl12, Stat1, Stat2, Isg15, Eif2ak2, Il6st, Pdgfra, Socs4 and Csf2ra had the significant number of interactions and the greatest value of d to downstream genes among all frequent transactions. Results of RT-qPCR validation for the expression of candidate genes after the knockdown of miR-124-3p showed a similar trend to the RNA-Seq results. Conclusion: This study indicated that using the Apriori algorithm and defining the statistic d was a novel way to refine the GSEA results. We hope to convey the intricacies from the computational results to the low-throughput experiments, and to plan experimental investigations specifically.

Recent Development of Atmospheric Water Harvesting Materials: A Review.

The lack of freshwater has been threatening many people who are living in Africa, the Middle East, and Oceania, while the discovery of freshwater harvesting technology is considered a promising solution. Recent advances in structured surface materials, metal-organic frameworks, hygroscopic inorganic compounds (and derivative materials), and functional hydrogels have demonstrated their potential as platform technologies for atmospheric water (i.e., supersaturated fog and unsaturated water) harvesting due to their cheap price, zero second energy requirement, high water capture capacity, and easy installation and operation compared with traditional water harvesting methods, such as long-distance water transportation, seawater desalination, and electrical dew collection devices in rural areas or individual-scale emergent usage. In this contribution, we highlight recent developments in functional materials for "passive" atmospheric water harvesting application, focusing on the structure-property relationship (SPR) to illustrate the transport mechanism of water capture and release. We also discuss technical challenges in the practical applications of the water harvesting materials, including low adaptability in a harsh environment, low capacity under low humidity, self-desorption, and insufficient solar-thermal conversion. Finally, we provide insightful perspectives on the design and fabrication of atmospheric water harvesting materials.

Controllable synthesis of a hollow core-shell Co-Fe layered double hydroxide derived from Co-MOF and its application in capacitive deionization.

Capacitive deionization (CDI) is considered one of the most promising desalination technologies for obtaining fresh water from saline water. In this work, we synthesized a hollow core-shell Co-MOF@Fe/Co-LDH (Co-Fe-LDH) material by developing a strategy to simultaneously grow Co/Fe-LDH on the surface of a Co-MOF precursor in situ. Owing to the increase in the specific surface area of the hollow structure and the Faradaic process of a layered double hydroxide (LDH), the Co-Fe-LDH material exhibits high electrical double layer (EDL) capacitance and pseudocapacitance, which significantly improves the salt adsorption of the material during CDI (34.2 mg/g in a 600 mg/L NaCl solution at 1.2 V). The adsorption for NaCl in this work is approximately 2.5 times the maximum salt adsorption capacity (SAC) of LDH materials applied in nonmembrane CDI (NMCDI). This work may provide a promising model for the application of hollow LDH materials that exhibit pseudocapacitance in CDI.

Identification of the aberrantly methylated differentially expressed genes in proliferative diabetic retinopathy.

Diabetic retinopathy (DR) is the most common complication of diabetes. Proliferative DR (PDR) is a more advanced stage of DR, which can cause severe impaired vision and even blindness. However, the precise pathological mechanisms of PDR remain unknown. DNA methylation serves an important role in the initiation and progression of numerous types of disease including PDR. The purpose of this study was to identify the aberrantly methylated differentially expressed genes (DEGs) as potential therapeutic targets of PDR. The gene expression microarray dataset GSE60436 and the methylation profiling microarray dataset GSE57362 were used to determine the aberrantly methylated DEGs in PDR, utilizing normal retinas as controls and fibrovascular membranes (FVMs) in patients with PDR as PDR samples. The functional term and signaling pathway enrichment analysis of the selected genes were subsequently performed. In addition, protein-protein interaction (PPI) networks were constructed to determine the hub genes, and the network of transcriptional factor (TF) and target hub genes was also analyzed. In total, 132 hypomethylated genes were found to be upregulated, whereas 172 hypermethylated genes were discovered to be downregulated in PDR. The hypomethylated upregulated genes were found to be enriched in the pathways, such as "cell-substrate adhesion", "adherens junction", "cell adhesion molecule binding" and "extracellular matrix receptor interactions". Meanwhile, the hypermethylated downregulated genes were enriched in the pathways, such as "visual perception", "presynapse" and the "synaptic vesicle cycle". Based on the PPI analysis, a total of eight hub genes were identified: CTGF, SERPINH1, LOX, RBP3, OTX2, RPE65, OPN1SW and NRL. It was hypothesized that the aberrant methylation of these genes might be related to the possible pathophysiology of PDR. An important transcriptional factor, TFDP1, was discovered to share the closest interactions with the hub genes from the gene-TF network. In conclusion, the present study identified an association among DNA methylation and gene expression in PDR using bioinformatics analysis, and identified the hub genes which might be potential methylation-based diagnosis and treatment targets for PDR in the near future.

Synthesis of cation exchange membranes for capacitive deionization based on crosslinked polyvinyl alcohol with citric acid.

Constructing new cation exchange membranes (CEM) has been regarded as an easy and effective approach to improving the capacitive deionization (CDI) system. In this study, a new method of fabrication of CEM was introduced by crosslinking sulfosuccinic acid (SSA) and citric acid (CA). The SSA and CA were crosslinked with polyvinyl alcohol (PVA) to fabricate CEMs in a series of conditions. The ion transference number for each fabricated membrane was tested to select the optimal recipe. The membrane fabricated by the selected method was then tested in the CDI system and the results show that the total percentage of SSA could be reduced from 5% to 1% by adding 5 g of non-toxic and inexpensive CA. The cost of preparing the membrane also decreased from US$0.18 per square meter to US$0.03. The adsorption capacity and the charge efficiency of membrane capacitive deionization system (MCDI) coated with a PVA/SSA/CA layer (mass ratio 10:1:5) was compared with the normal CDI and the MCDI coated with the original membrane (PVA:SSA = 19:5), which is named O-MCDI). The results show that with the modified membrane, the adsorption capacity and the charge efficiency can be enhanced by 18% and 28% compared with the CDI. In addition, although the cost is reduced, the desalination efficiency is still guaranteed. The adsorption capacity and charge efficiency are still increased by about 3% compared with the O-MCDI.

Fractionation of mono- and divalent ions by capacitive deionization with nanofiltration membrane.

In this study, we demonstrated the influence of adding nanofiltration membranes to a CDI cell, when desalinating mono- and divalent salt solutions both theoretically and experimentally, and proposed a new procedure for the separation of mono- and divalent ions. It is revealed that the distinction of the diffusion coefficient between mono- and divalent ions is the key to the effective separation. Combined with the appropriate time of adsorption (1.5 h), the concentration ratio of NaCl to MgSO4 can be increased by a factor of 3, from a mixture with equal amount of NaCl and MgSO4.

Fabrication of porous graphene electrodes via CO2 activation for the enhancement of capacitive deionization.

Capacitive deionization (CDI) is a simple, cost-efficient and environmentally-friendly method for brackish water desalination. In order to improve the desalination performance, the inner structures of the porous electrodes should provide more space for ion storage and transportation. Therefore, we utilized an efficient method to synthesize porous graphene electrodes based on the technique of pressurized oxidation and CO2 activation. The prepared electrodes were characterized electrochemically by cyclic voltammetry, galvanostatic charge/discharge and electrochemical impedance spectroscopy, and the desalination performance between different samples was compared as well. These results showed that AGE-30 had the highest electrosorption capacity (6.26 mg/g) among all samples, and this was attributed to its high specific surface area (898 m2/g), high pore volume (1.223 cm3/g), high specific capacitance (56.21F/g), and smaller inner resistance. Thus, the CO2 activation is confirmed to be a useful method for the enhancement of the graphene electrodes for CDI.