Bruxism in children: Use of the Functional Plane of Monaco (FPM).

BACKGROUND: Bruxism is a condition that results from hyperactivity in the central nervous system, and factors such as stress or other anxious conditions increase the frequency of episodes. When bruxism occurs at a young age, tooth wear can occur. The extent of wear can lead to the need for restorative dentistry and prosthetic treatments to restore the morphological and functional integrity of the teeth, with high costs associated with such treatments. CASE REPORT: A healthy 15-year-old boy presented to the orthodontist observation. His incisal ridges appeared thin, without mamelons, and with increased translucency. For treatment, the authors used only the Functional Plane of Monaco (FPM), a device which he had to wear 16 hours during the day. CONCLUSION: The orthodontist successfully treated an orthopaedic/orthodontic case with the FPM device.

Influence of a repeated preheating procedure on mechanical properties of three resin composites.

The aim of this study was to assess the flexural strength, flexural elastic modulus and Vickers microhardness of three resin composites prepared at room temperature or cured after one or repeated preheating cycles to a temperature of 39°C. Three resin composites were evaluated: Enamel Plus HFO (Micerium), Opallis (FGM), and Ceram X Duo (Dentsply DeTrey). For each trial, one group of specimens of each material was fabricated under ambient laboratory conditions, whereas in the other groups, the composites were cured after 1, 10, 20, 30, or 40 preheating cycles to a temperature of 39°C in a preheating device. Ten rectangular prismatic specimens (25 × 2 × 2 mm) were prepared for each group (N=180; n=10) and subjected to a three-point bending test for flexural strength and flexural modulus evaluation. Vickers microhardness was assessed on 10 cylindrical specimens from each group (N=180; n=10). Statistical analysis showed that, regardless of the material, the number of heating cycles was not a significant factor and was unable to influence the three mechanical properties tested. However, a significant main effect of the employed material on the marginal means of the three dependent variables was detected.