Development and Evaluation of Oromucosal Spray Formulation Containing Plant-Derived Compounds for the Treatment of Infectious and Inflammatory Diseases of the Oral Cavity.

According to data in the literature, natural products and essential oils are often used in dental practice. To develop a new oromucosal spray for the treatment of infectious and inflammatory diseases of the oral cavity, clove CO2 extract and essential oils of lavender and grapefruit were used as active pharmaceutical ingredients. Clove extract was obtained by the method of subcritical extraction from various raw materials, the choice of which was based on the yield of the CO2 extract and the study of its phytochemical and microbiological properties. Based on the results of microscopic and diffraction analyses, the rational time of ultrasonic exposure for the emulsion of active pharmaceutical ingredients was established. Mucoadhesive polymers were used as stabilizers of the two-phase system and prolongators. This article discusses the impact of the type and concentration of mucoadhesive polymers on the stability of the emulsion system; the viscous, textural, adhesive, and film characteristics of oromucosal spray; and the parameters determining sprayability.

Development and Evaluation of Two-Phase Gel Formulations for Enhanced Delivery of Active Ingredients: Sodium Diclofenac and Camphor.

The formulation of biphasic gels as potential semi-solid carriers for hydrophilic and lipophilic active substances is promising for the development of pharmaceutical preparations. The aim of this study was to design a stable bigel composition and to determine the influence of the organogel/hydrogel ratio on the gel's physical-chemical and structural-mechanical properties. The investigated compositions of organogel/hydrogel remained stable at ratios ranging from 5/95 to 40/60. After texture and microstructure analysis, bigels with 20/80 and 25/75 ratios were selected as carriers for the active ingredients, sodium diclofenac and camphor, for use as topical preparations for the treatment of muscle-joint inflammation and pain. Although other researchers have published data on the preparation and evaluation of bigels, there are no scientific results on the development of a two-phase gel with our proposed combination of APIs. Sodium diclofenac release was found to be higher when combined with camphor, which revealed the advantages of the biphasic formulation. The pseudoplastic behavior, thixotropy, and thermal stability of flow of the studied bigel samples was investigated by rheological analysis. Ongoing stability studies confirmed the minimal 6-month period.

The Study of the Cytotoxicity, Proliferative and Microbiological Activity of the Medicated Chewing Gum with Ascorbic Acid and Lysozyme Hydrochloride Using Different Culture of Cells.

Medicated chewing gum with lysozyme hydrochloride and ascorbic acid as active pharmaceutical ingredients was developed for application in dentistry. The aim of this research was to study the cytotoxicity, proliferative, and microbiological activities of the active ingredients in different types of cell cultures. The preclinical study of active pharmaceutical ingredients and their combinations was carried out using culture lines such as HepG2 (human hepatocarcinoma cells), Hek293 (human embryonic kidney cells), and MAEC (mouse aortic endothelial cells). MTT assays were used to analyse cytotoxicity and proliferative activity, while the state of antioxidant protection was assessed by the content of sulfhydryl groups and catalase activity. The determination of lipid peroxidation products was based on the level of TBA-active products. As a microbiological model for studying the effect of the developed dental medicine on the ability of the oral cavity microorganisms to form biofilms, the following strains were used: Streptococcus mutans, Staphylococcus aureus, Staphylococcus epidermidis, Lactobacillus plantarum, and Candida albicans. The optical density of the formed biofilm was evaluated by the intensity of the experimental sample's colour on a StatFax 303 Plus photometer at a wavelength of 630 nm. The combination of ascorbic acid and lysozyme hydrochloride in the established concentrations (20 mg and 10 mg per 1 gum, respectively) resulted in a slight stimulation of cell proliferation without any toxic effects and increased antioxidant protection, preventing the development of oxidative stress. It was found that, in contrast to the separately used active substances, the combination of lysozyme hydrochloride and ascorbic acid inhibits the biofilm formation of all studied microorganisms and shows the ability to destroy diurnal biofilms of L. plantarum and fungi of the genus Candida, indicating potentiation and summation of the active pharmaceutical ingredients' composition effects in the developed dental medicine. Due to the observed positive pharmacological and microbiological action, the combination of lysozyme hydrochloride and ascorbic acid in the medicated chewing gum serves as a promising tool for the prevention and treatment of infectious and inflammatory diseases of the periodontium and mucous membranes and the prevention of caries.

Natural Herbal Non-Opioid Topical Pain Relievers-Comparison with Traditional Therapy.

Pain is the predominant symptom of many clinical diseases and is frequently associated with neurological and musculoskeletal problems. Chronic pain is frequent in the elderly, causing suffering, disability, social isolation, and increased healthcare expenses. Chronic pain medication is often ineffective and has many side effects. Nonsteroidal over-the-counter and prescription drugs are frequently recommended as first-line therapies for pain control; however, long-term safety issues must not be neglected. Herbs and nutritional supplements may be a safer and more effective alternative to nonsteroidal pharmaceuticals for pain management, especially when used long-term. Recently, topical analgesic therapies have gained attention as an innovative approach due to their sufficient efficacy and comparatively fewer systemic side effects and drug-drug interactions. In this paper, we overview the main natural herbal pain relievers, their efficacy and safety, and their potential use as topical agents for pain control. Although herbal-derived medications are not appropriate for providing quick relief for acute pain problems, they could be used as potent alternative remedies in managing chronic persistent pain with minimal side effects.

Impact of Compression Force on Mechanical, Textural, Release and Chewing Perception Properties of Compressible Medicated Chewing Gums.

Medicated chewing gums (MCGs) represent a beneficial platform for realizing drugs intended for dental prophylaxis and treatment. The present study aimed to investigate the impact of compression force on the mechanical, textural, release, and chewing perception characteristics of compressible MCGs with the combination of lysozyme hydrochloride (LH) and ascorbic acid (AsA). Four batches of MCGs were obtained on a laboratory single-punch tablet machine applying different forces, i.e., 5, 7, 10, and 15 kN, and evaluated by their geometrical parameters, mechanical resistance, surface and internal structure characteristics, texture profile, release behavior, and perception attributes during mastication. It was found that increasing compression force slightly affected resistance to crushing and friability of MCGs, but resulted in surface smoothing and formation of a thicker layer with highly compacted particle arrangement. According to the texture analysis, increasing compression force led to harder and more adhesive gums, indicating possible difficulties in chewing and, therefore, impairment of their consumer properties. Lower compression forces were also found to be preferable in terms of better drug release from the obtained chewing gums. The volunteers' assessment showed that an increase of compression force led to significantly raising the initial hardness and crumbliness as well as to decreasing the rate of the integral gum mass formation during mastication, which may negatively affect perceptive sensations when using MCGs. Based on the results obtained, the optimal compressing force was selected to be 7 kN, which allows obtaining MCGs with good organoleptic, mechanical, textural, and release properties.

The Influence of pH Values on the Rheological, Textural and Release Properties of Carbomer Polacril® 40P-Based Dental Gel Formulation with Plant-Derived and Synthetic Active Components.

The physicochemical properties, especially pH value of dental medicines, have significant influence on the health of oral cavity tissues. The pH of formulations should correspond to the value of saliva pH (5.5-8.0). For carbomer-based gels, the required pH value is obtained by neutralizing them with alkaline components, which leads to their structuring (thickening). This affects the physical properties of the gel, its residence time at the application site and the rate of release of active pharmaceutical ingredient. Therefore, the main purpose of this study is to evaluate the rheological, textural, and biopharmaceutical properties of Carbomer Polacril® 40P-based dental gel depending on the pH value. Evaluation of the rheological properties of gel preparations were performed by measuring the structural viscosity of the samples as a function of pH and temperature. The textural properties of the gel were evaluated by performing tests regarding back extrusion and spreadability. Carbomer Polacril® 40P-based gels haven't shown noticeable thixotropic behavior, and were characterized by plastic flow in the whole studied pH range. The structural viscosity at the selected average pH value hasn't differed at storage (25 °C) and application (37 °C) temperature. Texture studies of dental gels have shown a strong correlation with rheoparameters. Their rheological behavior and textural properties haven't changed significantly between the pH range of 5.5-6.6. The relatively narrow range of working pH values does not affect the change in the viscosity of the preparation significantly and, consequently, does not affect the release of APIs from the developed Carbomer Polacril® 40P-based dental gel.

Development and uniformity evaluation of low-dose medicated chewing gums prepared by compression method.

The aim of this work was to develop medicated chewing gums (MCGs) containing 10 mg of lysozyme hydrochloride (LH) and 20 mg of ascorbic acid (AsA) obtained by the compression method with Health in Gum® (HiG®) PWD 01 as a compressible gum base. Because of a low content of active ingredients, it was essential to choose the way of adding them to the tableting mass and evaluate their distribution homogeneity in the dosage units. The blends for compression were prepared by two methods: the first one was simple mixing of all components; the second one included the step of wet granulation of a three-component mixture - LH, sucralose and a taste additive. Flow properties of LH, AsA, HiG®, LH granules and blends for compression were studied. MCGs were evaluated according to Ph.Eur. 9.0 Chapters 2.9.5, 2.9.6 and 2.9.40. AsA and HiG® were characterized as free flowing, while LH had insufficient flow properties. Compared with a simple mixed blend, the granulation step allowed significantly improving flow properties of the final blend for compression. Unlike MCGs compressed from the simple mixed blend, MCGs prepared through the granulation step met Ph.Eur. 9.0 Chapter 2.9.40 requirements. The propriety of MCG preparation method involving the step of wet granulation also has been confirmed by mass and drug content uniformity tests.