RESUMEN
Li6ZnO4 was chemically modified by nickel addition, in order to develop different compositions of the solid solution Li6Zn1-xNixO4. These materials were evaluated bifunctionally; analyzing their CO2 capture performances, as well as on their catalytic properties for H2 production via dry reforming of methane (DRM). The crystal structures of Li6Zn1-xNixO4 solid solution samples were determined through X-ray diffraction, which confirmed the integration of nickel ions up to a concentration around 20 mol%, meanwhile beyond this value, a secondary phase was detected. These results were supported by XPS and TEM analyses. Then, dynamic and isothermal thermogravimetric analyses of CO2 capture revealed that Li6Zn1-xNixO4 solid solution samples exhibited good CO2 chemisorption efficiencies, similarly to the pristine Li6ZnO4 chemisorption trends observed. Moreover, a kinetic analysis of CO2 isothermal chemisorptions, using the Avrami-Erofeev model, evidenced an increment of the constant rates as a function of the Ni content. Since Ni2+ ions incorporation did not reduce the CO2 capture efficiency and kinetics, the catalytic properties of these materials were evaluated in the DRM process. Results demonstrated that nickel ions favored hydrogen (H2) production over the pristine Li6ZnO4 phase, despite a second H2 production reaction was determined, methane decomposition. Thereby, Li6Zn1-xNixO4 ceramics can be employed as bifunctional materials.
Asunto(s)
Dióxido de Carbono , Hidrógeno , Metano , Hidrógeno/química , Metano/química , Dióxido de Carbono/química , Níquel/química , Catálisis , Modelos QuímicosRESUMEN
Monometallic Ni, Pd and Pt and bimetallic catalysts formed by combinations of the above metals supported on SBA-15 silica were synthesized, characterized and tested in the hydrodeoxygenation reaction of anisole. The objective of the work was to detect the effect of the nature of metals on the activity of the catalysts at different steps of anisole hydrodeoxygenation: hydrogenation of the aromatic ring of anisole and C-O bond cleavage in the intermediate cyclohexyl methyl ether. The support and the catalysts were characterized by N2 physisorption, X-ray diffraction, UV-vis diffuse reflectance spectroscopy, temperature-programmed reduction, scanning electron microscopy-energy dispersive X-ray spectroscopy, transmission electron microscopy and HAADF-STEM. The catalytic activity tests were carried out in a batch reactor at 280 °C and 7.3 MPa pressure. The activity results show that the NiPd/SBA-15 catalyst had the greatest ability for hydrogenation of the aromatic ring of anisole, while its NiPt/SBA-15 analog resulted in better activity for C-O bond hydrogenolysis. The bimetallic NiPt/SBA-15 catalyst showed the best catalytic performance in the HDO of anisole ascribed to the formation of a Ni-Pt alloy. On the other hand, the combination of Pd and Pt metals in the PdPt/SBA-15 catalyst resulted in the formation of bimetallic particles with Pd-rich and Pt-rich domains, showing high selectivity for the formation of the cyclohexyl methyl ether, which can be useful for the hydrogenation of aromatic rings in O-containing reactants with the formation of saturated O-containing products. According to the characterization results (HAADF-STEM), the different catalytic behavior of NiPd/SBA-15, NiPt/SBA-15, and PdPt/SBA-15 catalysts could be attributed to different characteristics of the bimetallic active phases in them.
RESUMEN
Given the binary nature of nanoalloy systems, their properties are dependent on their size, shape, structure, composition, and chemical ordering. When energy and entropic factors for shapes and structure variations are considered in nanoparticle growth, the spectra of shapes become so vast that even metastable arrangements have been reported under ambient conditions. Experimental and theoretical variations of multiply twinned particles have been observed, from the Ino and Marks decahedra to polyicosahedra and polydecahedra with comparable energetic stability among them. Herein, we report the experimental production of a stable doubly truncated double-icosahedron structure (TdIh) in Au-Ag nanoparticles, in which a twinned Ag-rich alloyed shell is reconstructed on a Au-Ag alloyed Ino-decahedral core. The structure, chemical composition, and growth pathway are proposed on the basis of high-angle annular dark-field scanning transmission electron microscopy analysis and excess energy calculations, while its structural stability is estimated by large-scale atomic molecular dynamics simulations. This novel nanostructure differs from other structures previously reported.
RESUMEN
CsPbBr3 nanocrystals (NCs) are promising optoelectronic and catalytic materials. Manipulating their morphology can improve their properties and stability. In this work, an alkene-derived zwitterionic ligand was used to control the morphology of CsPbBr3 NCs to yield the highly unusual rhombicuboctahedron morphology, showcasing the first example of a surfactant-tail controlled growth.
RESUMEN
Herein, we report the synthesis of novel platinum-based nanoparticles with step-pyramidal growth induced by poly(diallyldimethylammonium chloride) (PDDA). The complex stepped pyramidal shape became the central point for outstanding catalytic reduction of 4-nitrophenol, overcoming the activity of bare Pt nanoparticles. These results are valuable for the catalytic degradation of reactive molecules.
RESUMEN
In the present work, the chemical synthesis of AgPt nanoalloys is reported by the polyol method using polyvinylpyrrolidone (PVP) as a surfactant and a heterogeneous nucleation approach. Nanoparticles with different atomic compositions of the Ag and Pt elements (1:1 and 1:3) were synthesized by adjusting the molar ratios of the precursors. The physicochemical and microstructural characterization was initially performed using the UV-Vis technique to determine the presence of nanoparticles in suspension. Then, the morphology, size, and atomic structure were determined using XRD, SEM, and HAADF-STEM techniques, confirming the formation of a well-defined crystalline structure and homogeneous nanoalloy with an average particle size of less than 10 nm. Finally, the cyclic voltammetry technique evaluated the electrochemical activity of bimetallic AgPt nanoparticles supported on Vulcan XC-72 carbon for the ethanol oxidation reaction in an alkaline medium. Chronoamperometry and accelerated electrochemical degradation tests were performed to determine their stability and long-term durability. The synthesized AgPt (1:3)/C electrocatalyst presented significative catalytic activity and superior durability due to the introduction of Ag that weakens the chemisorption of the carbonaceous species. Thus, it could be an attractive candidate for cost-effective ethanol oxidation compared to commercial Pt/C.
RESUMEN
The field of nanoalloys has been advancing at a rapid pace in the last two decades. Many new characterization methods and theoretical advances have produced a substantial knowledge of the nanoalloys' properties and structure. Most of the work has been limited to binary alloys. A path forward for the field will be the study of nanoalloys with three or more metals. Adding new components will produce new properties and possibly more fabrication controls. In this paper, we will discuss the challenges that will arise in multi-metallic nanoalloys. We will show that entropy and twin boundaries play a dominant role in multi-metallic alloys.
RESUMEN
Many reliable and reproducible methods exist for manufacturing gold nanoparticles with the desired and specific compositions, structures, arrangements, and physicochemical properties. In this report, we review the key principles guiding the formation and growth of nanoclusters, their evolution into nanoparticles, and the role and contribution of coatings. We describe a range of imaging methods for characterization of nanoparticles at atomic resolution and a range of spectroscopy methods for structural and physicochemical characterization of such nanoparticles. This chapter concludes with a short review of the emergent applications of nanoparticles in biosciences.
Asunto(s)
Oro/química , Nanopartículas del Metal/química , Microscopía Electrónica de Transmisión , Tamaño de la PartículaRESUMEN
Growth of anisotropic nanostructures enables the manipulation of optical properties across the electromagnetic spectrum by fine morphological tuning of the nanoparticles. Among them, stellated metallic nanostructures present enhanced properties owing to their complex shape, and hence, the control over the final morphology becomes of great importance. Herein, a seed-mediated method for the high-yield production of goldrich-copper concave branched nanostructures and their structural and optical characterization is reported. The synthesis protocol enabled excellent control and tunability of the final morphology, from concave pentagonal nanoparticles to five-fold branched nanoparticles, named "nanostars". The anisotropic shape was achieved via kinetic control over the synthesis conditions by selective passivation of facets using a capping agent and assisted by the presence of copper chloride ions, both having a crucial impact over the final structure. Optical extinction measurements of nanostars in solution indicated a broad spectral response, hiding the properties of the individual nanostars. Hence, single-particle scattering measurements of individual concave pentagonal nanoparticles and concave nanostars were performed to determine the origin of the multiple plasmon bands by correlation with their morphological features, following their growth evolution. Finite-difference time-domain calculations delivered insights into the geometry-dependent plasmonic properties of concave nanostars and their packed aggregates. Our results uncover the intrinsic scattering properties of individual nanostars and the origin of the broad spectral response, which is mostly due to z-direction packed aggregates.
RESUMEN
Anisotropic gold nanoparticles offer potential applications due to their functionalities and shape-dependent properties. Reshaping noble metal nanoparticles is an interesting field with optical, surface-enhanced Raman spectroscopy, catalytic applications and potential application as a photothermic therapy. This work comprises a structural study on gold nano bipyramids (Au NBPs) and nanodumbbells, and the evolution of Au NBPs capped with cetyltrimethylammonium bromide and dodecanethiol through an in situ and ex situ heating process in high vacuum. Also, we study the reshaping of Au NBPs by the addition of Pt to study the surface modification and the strain generated on a single particle by geometric phase analysis.
RESUMEN
Heteroatom-doped metal-free graphene has been widely studied as the catalyst for the oxygen reduction reaction (ORR). Depending on the preparation method and the dopants, the ORR activity varies ranging from a two-electron to a four-electron pathway. The different literature reports are difficult to correlate due to the large variances. However, due to the potential metal contamination, the origin of the ORR activity from "metal-free" graphene remains confusing and inconclusive. Here we decipher the ORR catalytic activities of diverse architectures on graphene derived from reduced graphene oxide. High angle annular dark field scanning transmission electron microscopy, X-ray absorption near edge structure, extended X-ray absorption fine structure, and trace elemental analysis methods are employed. The mechanistic origin of ORR activity is associated with the trace manganese content and reaches its highest performance at an onset potential of 0.94 V when manganese exists as a mononuclear-centered structure within defective graphene. This study exposes the deceptive role of trace metal in formerly thought to be metal-free graphene materials. It also provides insight into the design of better-performing catalyst for ORR by underscoring the coordination chemistry possible for future single-atom catalyst materials.
RESUMEN
We report the efficient wet-chemical production of self-assembled gold-copper bimetallic nanoparticles (diameter of â¼2 nm) into two-dimensional flexible ribbonlike nanostructures. The direct observation of a layered arrangement of particles into nanoribbons was provided through high-resolution transmission electron microscopy and electron tomography. These nanoribbons showed photoluminesce and efficient photocatalytic activity for the conversion of 4-nitrophenol. The thermal stability of the nanoribbons was also measured by in situ heat treatment in the electron microscope, confirming that the self-assembled gold-copper nanoribbons efficiently supported up to 350 °C. The final morphology of the nanoparticles and their ability to self-assemble into flexible nanoribbons were dependent on concentration and the ratio of precursors. Therefore, these experimental factors were discussed. Remarkably, the presence of copper was found to be critical to triggering the self-assembly of nanoparticles into ordered layered structures. These results for the synthesis and stability of self-assemblies of metallic nanoparticles present a potential extension of the method to producing materials with catalytic applications.
RESUMEN
Electrochemical oxygen reduction reaction (ORR) catalysts that have both high activities and long-term stabilities are needed for proton-exchange membrane fuel cells (PEMFCs) and metal-air batteries. Two-dimensional (2D) materials based on graphene have shown high catalytic activities, however, carbon-based materials result in significant catalyst degradation due to carbon oxidation that occurs at high electrochemical potentials. Here, we introduce the synthesis and electrochemical performance of metallic 2D nanoframes which represent a new approach to translate 2D materials into unsupported (carbon-free) electrocatalysts that have both significantly higher ORR catalytic activities and stabilities compared with conventional Pt/carbon electrocatalysts. Metallic Ni-Pt 2D nanoframes were synthesized by controlled thermal treatments of Pt-decorated Ni(OH)2 nanosheets. The nanoframes consist of a hierarchical 2D framework composed of a highly catalytically active Pt-Ni alloy phase with an interconnected solid and pore network that results in three-dimensional molecular accessibility. The inclusion of Ni within the Pt structure resulted in significantly smaller Pt lattice distances compared to those of Pt nanoparticles. On the basis of its unique local and extended structure, the ORR specific activity of Ni-Pt 2D nanoframes (5.8 mA cmPt-2) was an order of magnitude higher than Pt/carbon. In addition, accelerated stability testing at elevated potentials up to 1.3 VRHE showed that the metallic Ni-Pt nanoframes exhibit significantly improved stability compared with Pt/carbon catalysts. The nanoarchitecture and local structure of metallic 2D nanoframes results in high combined specific activity and elevated potential stability. Analysis of the ORR electrochemical reaction kinetics on the Ni-Pt nanoframes supports that at low overpotentials the first electron transfer is the rate-determining step, and the reaction proceeds via a four electron reduction process. The ability to create metallic 2D structures with 3D molecular accessibility opens up new opportunities for the design of high activity and stability carbon-free catalyst nanoarchitectures for numerous electrocatalytic and catalytic applications.
RESUMEN
Selenoproteins play an important role in the human body by accomplishing essential biological functions like oxido-reductions, antioxidant defense, thyroid hormone metabolism and immune response; therefore, the possibility to synthesize selenium nanoparticles free of any contaminants is exciting for future nano-medical applications. This paper reports the first synthesis of selenium nanoparticles by femtosecond pulsed laser ablation in de-ionized water. Those pure nanoparticles have been successfully used to inhibit the formation of Candida albicans biofilms. Advanced electron microscopy images showed that selenium nanoparticles easily adhere on the biofilm, then penetrate into the pathogen, and consequently damage the cell structure by substituting with sulfur. 50% inhibition of Candida albicans biofilm was obtained at only 25 ppm. Finally, the two physical parameters proved to affect strongly the viability of Candida albicans are the crystallinity and particle size.
Asunto(s)
Antifúngicos/farmacología , Biopelículas/efectos de los fármacos , Candida albicans/efectos de los fármacos , Candidiasis/prevención & control , Nanopartículas/química , Nanotecnología/métodos , Selenio/farmacología , Antifúngicos/química , Humanos , Rayos Láser , Nanopartículas/ultraestructura , Nanotecnología/instrumentación , Selenio/químicaRESUMEN
In this work, we report the synthesis and detailed structural characterization of novel helical gold-copper nanowires. The nanowires possess the Boerdijk-Coxeter-Bernal structure, based on the pile up of octahedral, icosahedral, and/or decahedral seeds. They are self-assembled into a coiled manner as individual wires or into a parallel-ordering way as groups of wires. The helical nanowires are ultrathin with a diameter of less than 10 nm and variable length of several micrometers, presenting a high density of twin boundaries and stacking faults. To the best of our knowledge, such gold-copper nanowires have never been reported previously.
Asunto(s)
Cobre/química , Oro/química , Nanocables/ultraestructura , Aminas/química , Glucosa/química , Modelos Moleculares , Nanotecnología/métodos , Nanocables/químicaRESUMEN
The alloy Au-Ag system is an important noble bimetallic phase, both historically (as "Electrum") and now especially in nanotechnology, as it is applied in catalysis and nanomedicine. To comprehend the structural characteristics and the thermodynamic stability of this alloy, a knowledge of its phase diagram is required that considers explicitly its size and shape (morphology) dependence. However, as the experimental determination remains quite challenging at the nanoscale, theoretical guidance can provide significant advantages. Using a regular solution model within a nanothermodynamic approach to evaluate the size effect on all the parameters (melting temperature, melting enthalpy, and interaction parameters in both phases), the nanophase diagram is predicted. Besides an overall shift downward, there is a "tilting" effect on the solidus-liquidus curves for some particular shapes exposing the (100) and (110) facets (cube, rhombic dodecahedron, and cuboctahedron). The segregation calculation reveals the preferential presence of silver at the surface for all the polyhedral shapes considered, in excellent agreement with the latest transmission electron microscopy observations and energy dispersive spectroscopy analysis. By reviewing the nature of the surface segregated element of different bimetallic nanoalloys, two surface segregation rules, based on the melting temperatures and surface energies, are deduced. Finally, the optical properties of Au-Ag nanoparticles, calculated within the discrete dipole approximation, show the control that can be achieved in the tuning of the local surface plasmon resonance, depending of the alloy content, the chemical ordering, the morphology, the size of the nanoparticle, and the nature of the surrounding environment.
Asunto(s)
Aleaciones/química , Oro/química , Nanopartículas del Metal/química , Plata/química , Nanopartículas del Metal/ultraestructura , Microscopía Electrónica de Transmisión , Nanotecnología , Tamaño de la Partícula , Transición de Fase , Resonancia por Plasmón de Superficie , Temperatura , TermodinámicaRESUMEN
Nanoalloys have emerged as multi-functional nanoparticles with applications in biomedicine and catalysis. This work reports the efficient production and the advanced transmission electron microscopy characterization of gold-copper pentagonal nanostars. The morphology of the branches is controlled by the adequate choice of the capping agent. When oleylamine is used rounded nanostars are produced, while pointed nanostars are obtained by using hexadecylamine. Both types of nanostars were proved to be thermally stable and could therefore be used as therapeutic agents in photo-thermal therapies as confirmed by the near-infrared absorption spectra.