Longevity of posterior direct versus indirect composite restorations: A systematic review and meta-analysis.

OBJECTIVES: The goal of this systemic review and meta-analysis was to compare the longevity of direct and indirect composite restorations in posterior teeth. DATA: Randomized controlled trials (RCT) investigating direct and indirect composite restorations in permanent posterior teeth. SOURCES: Three electronic databases (PubMed, CENTRAL (Cochrane) and Embase) were screened. No language or time restrictions were applied. Study selection, data extraction and quality assessment were done in duplicate. Risk of bias and level of evidence was graded using Risk of Bias 2.0 tool and Grade Profiler 3.6. RESULTS: A total of 3056 articles were found by electronic databases. Finally, five RCTs were selected. Overall, 627 restorations of which 323 were direct and 304 indirect composite restorations have been placed in 279 patients (age: 28-81 years). The highest annual failure rates (AFR) were found for indirect restorations ranging from 0 % to 15.5 %. Lower AFR were found for direct restorations ranging from 0 % to 5.4 %. The most frequent failures were found to be chipping and fracture of the restoration followed by caries. Meta-analysis revealed that the failure rate for direct restorations was significantly lower than for indirect restorations (Risk Ratio (RR) [95 %CI] = 0.61 [0.47; 0.79]; very low level of evidence). Furthermore, all studies showed a high risk of bias. CONCLUSION: Direct and indirect composite restorations can be recommended for large class II cavities including cusp coverage in posterior teeth for single tooth restoration. Meta-analysis revealed significantly lower relative risk to fail for direct composite restorations than for indirect restorations but results are with high risk of basis.

Conquering class imbalances in deep learning-based segmentation of dental radiographs with different loss functions.

OBJECTIVE: The imbalanced nature of real-world datasets is an ongoing challenge in the field of machine and deep learning. In medicine and in dentistry, most data samples represent patients not affected by pathologies, and on imagery, pathologic image areas are often smaller than healthy ones. Selecting suitable loss functions during deep learning is essential and may help to overcome the resulting imbalance. We assessed six different loss functions for one exemplary task, tooth structure segmentation on bitewing radiographs, for their performance. METHODS: Six different loss functions (Focal Loss, Dice Loss, Tversky Loss and hybrid losses of Cross-Entropy and Dice Loss, Focal and Dice Loss, Focal and Generalized Dice Loss) were compared on a tooth structure segmentation task of 1,625 bitewing radiographs. Training was performed using three different model architectures (U-Net, Linknet, DeepLavbV3+) over a 5-fold cross-validation. Tooth structures consisted of the classes (occurrence in% of samples/captures areas measured on pixel level) enamel (100 %/25 %), dentin (100 %/50 %), root canal (100 %/10 %), filling (81 %/8 %) and crown (28 %/5 %). RESULTS: Hybrid loss functions significantly outperformed standalone ones and provided robust results over the different architectures for the classes enamel, dentin, root canal and filling. Specifically, the Dice Focal loss reached high performance to conquer both image level and pixel level class imbalance, respectively. CLINICAL SIGNIFICANCE: In dental use cases it is often important to predict minority classes such as pathologies accurately. Using specific loss function may be an effective strategy to overcome data imbalance when training deep learning models.

Aesthetic caries infiltration - Long-term masking efficacy after 6 years.

OBJECTIVES: This study aimed to evaluate the masking efficacy of caries infiltration technique of initial caries lesions (ICL) six years after debonding and single treatment. METHODS: In 10 adolescents, 74 ICL (ICDAS 2) in 74 teeth were treated by resin infiltration (Icon, DMG) at a mean (SD) of 1.2 (1.2) months after bracket removal. The etching procedure was performed up to 3 times. Standardized digital images were taken before treatment (T0), seven days (T7) and 6 years (T2190) after treatment. Outcomes included the evaluation of the color differences between carious and healthy enamel at T0, T7 and T2190 by quantitative colorimetric analysis (ΔE), ICDAS scores, quantitative light-induced fluorescence (QLF; ΔF,ΔQ,WS Area) and qualitative visual evaluation (5-point Likert-scale [deteriorated (1), unchanged (2), improved, but not satisfying (3), improved and no further treatment required (4), completely masked (5)). RESULTS: The median color difference ΔΕ0 (25th/75th percentiles) at T0 was 10.3 (8.56/13.0). At T7 a significant decrease was observed (ΔΕ7=3.7 (2.0/5.8); p<0.001; Friedmann-test; ICDAS p<0.001; Chi-square test). No significant changes based on ΔΕ (p=0.972; Friedmann-test) and ICDAS grading (p=0.511, chi-square test) were observed between T7 and T2190 (ΔΕ2190=2.9 (1.8/4.2)). Furthermore, at T2190 four experienced dentists classified 50% and 37% of the lesions as "improved and no further treatment required" and "completely masked", respectively (Fleiss kappa: T2190: 0.782 (substantial agreement)). CONCLUSION: Aesthetic caries infiltration can effectively mask post-orthodontic initial caries lesions for at least 6 years. These results for most of the teeth could not only be observed by quantitative but also by qualitative analysis. CLINICAL SIGNIFICANCE: Resin infiltration efficaciously masks post-orthodontic initial carious lesions. The optical improvement can be observed directly after treatment and remains stable for at least six years.

Short-term efficacy of caries resin infiltration during treatment with orthodontic fixed appliances. A randomized controlled trial.

OBJECTIVES: Objective of this trial was to assess the masking results in initial caries lesions (ICL) that were resin infiltrated during fixed orthodontic treatment in comparison to contralateral teeth that were fluoridated only. TRIAL DESIGN: A randomized, controlled, split-mouth trial. METHODS: Adolescent patients (age range: 12-18 years) with fixed orthodontic appliances who had developed ICL [ICDAS 1 or 2 (International Caries Detection and Assessment System)] during orthodontic treatment were consecutively recruited and randomly assigned to either resin infiltration (Icon) with up to 3 etching procedures (Inf) or to a fluoride varnish (Tiefenfluorid) (FV). Both interventions were performed according to the manufacturer's recommendations. Outcome assessors were blinded to the applied intervention. Primary and secondary outcomes included the evaluation of the appearance of the ICL before (T0) and 1 week after (T1) treatment by digital photographs (ΔE), laser fluorescence readings (DD), and ICDAS scores. BLINDING: Due to the treatment nature neither the operators nor the patients could be blinded. However, outcome assessors and the statistician were blinded. RESULTS: Fifteen patients (9 female) with 60 ICL were included (mean age: 14.6 years). At baseline FV and Inf did not differ significantly in ΔE (median ΔE0,T (25th/75th percentiles):10.7(9.1/20.9): ΔE0,I:13.4(10.3/18.5); P = 0.469), DD (P = 0.867) and ICDAS (P = 0.521). One-week after treatment (T1) ΔE values (P < 0.001), DD values (P < 0.001), and ICDAS scores (P = 0.014) for Inf were significantly reduced, whereas ΔE values (P = 0.125) and ICDAS scores (P = 0.073) for FV remained unchanged. LIMITATION: Natural remineralizing in the standard interventional control group cannot be observed yet, since up to 6 months are needed to naturally remineralize ICL. CONCLUSIONS: Based on our short-term data, resin infiltration effectively masked ICL during treatment with fixed orthodontic appliances. Fluoridation was not able to immediately improve the visual appearance of ICL. Further longer-term assessment should focus not only on the aesthetic outcome, but also on the caries inhibitory effect of resin infiltration during treatment with fixed orthodontic appliances. TRIAL REGISTRATION: German Clinical Trials Register (DRKS-ID: DRKS00011797).

Correlation of quantitative light-induced fluorescence and qualitative visual rating in infiltrated post-orthodontic white spot lesions.

OBJECTIVES: The aim of this prospective, clinical single-centre study was to evaluate the masking efficacy of post-orthodontic resin infiltration after 12-month follow-up and correlate quantitative and qualitative outcome measures. METHODS: Patients with completed fixed orthodontic treatment and the presence of one or more vestibular active non-cavitated white spot lesion/s (WSL) [ICDAS 1 or 2 (International Caries Detection and Assessment System)] were provided with resin infiltration 3-12 months after bracket removal. All patients (n = 31) participating before (t0) intervention were invited again and examined after 12 months (t2). Enamel demineralization was scored using quantitative light-induced fluorescence [QLF (DeltaF[flourescence], DeltaQ[lesion volume], White Spot Area)] and qualitative visual rating [11-point Likert-scale from 0 (no lesions visible on any tooth) to 10 (all teeth affected on the entire vestibular surface)]. RESULTS: In 17 patients (7 female and 10 male) 112 WSL (ICDAS 1: n = 1; ICDAS 2: n = 111) in 112 teeth were (re)examined. Before treatment (t0) a significant, weak (DeltaF), and moderate (DeltaQ, White Spot Area) correlation was observed between the quantitative and the qualitative rating (P < 0.002) [median DeltaF: -7.31 (-10.4/-6.58)%; DeltaQ:-2.25 (-10.8/-0.41)% mm2; White Spot Area: 0.34 (0.05/1.16) mm2; visual rating:3.7 ± 1.2]. Resin infiltration led to significantly increased fluorescence and decreased visual scores (P < 0.001) 7 days (t1) and 12 months (t2) after treatment. No significant changes based on DeltaF [-6.55 (-7.29/-6.08)%] and on visual ratings [1.0 ± 1.0] were observed between t1 and t2 (P = 1.000). After 7 days (t1) the correlation between the quantitative and the qualitative ratings remained significant, weak to moderate (P < 0.002). After 12 months (t2) the correlation was (non-)significant and weak for DeltaF, DeltaQ, and White Spot Area (P ≤ 0.097). LIMITATIONS: Since the overall masking efficacy of resin infiltration has been shown previously, an untreated control group was omitted. CONCLUSIONS: When assessing the masking efficacy of infiltrated post-orthodontic WSL only a weak to moderate correlation was found between QLF values and visual ratings. Furthermore, over time this correlation decreased. Thus, it remains unclear if QLF is a viable method to assess and quantify infiltrated post-orthodontic WSL over time. TRIAL REGISTRATION: German Clinical Trials Register (DRKS-ID:DRKS00005067).

Randomized in situ evaluation of surface polishing protocols on the caries-protective effect of resin Infiltrant.

The aim of this placebo-controlled randomized in situ study was to evaluate the effect of different surface polishing protocols on enamel roughness, bacterial adhesion and caries-protective effect of a resin infiltrant. Seventy-five bovine enamel samples having artificial caries lesions were treated with a resinous infiltrant and afterwards randomly dividided into five polishing protocols: aluminum oxide flexible disks (Al2O3-Disks), silicon carbide tips (SIC-Tips), silicon carbide brush (SIC-Brush), silicon carbide polyester strips (SIC-Strips) or no polishing [negative control (NC)]. Average surface roughness (Ra) was assessed by profilometry. Samples were mounted in palatal appliances under a mesh for biofilm accumulation. Fifteen volunteers wore the intraoral appliances (14-days) and cariogenic challenge was triggered by sucrose solutions. Biofilm formed was collected for microbiological analysis of caries-related bacteria (Streptococcus mutans, Lactobacillus acidophilus) and demineralization was assessed by cross-sectional microhardness. Mean Knoop hardness numbers (Kg/mm2) were plotted over lesion depth (µm) and area under the lesion curve was subtracted from sound enamel to determine demineralization (ΔS, Kg/mm2xµm). Data were analyzed by ANOVA and post-hoc comparisons (α = 0.05). NC resulted in significantly higher Ra means than Al2O3-Disks and SIC-Strips. Bacterial counts were not significantly different between the groups (p > 0.05). Regards ΔS means, however none of the groups were significantly different to NC (6983.3 kg/mm2xµm /CI 4246.1-9720.5, p > 0.05). Conclusions: Polishing protocols (Al2O3-Disks, SIC-Strips) significantly decreseased roughness of infiltrated-enamel, however none of the polishing protocols could signicantly decrease bacterial counts nor resulted in significant less demineralization.

Predicting mortality in the very old: a machine learning analysis on claims data.

Machine learning (ML) may be used to predict mortality. We used claims data from one large German insurer to develop and test differently complex ML prediction models, comparing them for their (balanced) accuracy, but also the importance of different predictors, the relevance of the follow-up period before death (i.e. the amount of accumulated data) and the time distance of the data used for prediction and death. A sample of 373,077 insured very old, aged 75 years or above, living in the Northeast of Germany in 2012 was drawn and followed over 6 years. Our outcome was whether an individual died in one of the years of interest (2013-2017) or not; the primary metric was (balanced) accuracy in a hold-out test dataset. From the 86,326 potential variables, we used the 30 most important ones for modeling. We trained a total of 45 model combinations: (1) Three different ML models were used; logistic regression (LR), random forest (RF), extreme gradient boosting (XGB); (2) Different periods of follow-up were employed for training; 1-5 years; (3) Different time distances between data used for prediction and the time of the event (death/survival) were set; 0-4 years. The mortality rate was 9.15% in mean per year. The models showed (balanced) accuracy between 65 and 93%. A longer follow-up period showed limited to no advantage, but models with short time distance from the event were more accurate than models trained on more distant data. RF and XGB were more accurate than LR. For RF and XGB sensitivity and specificity were similar, while for LR sensitivity was significantly lower than specificity. For all three models, the positive-predictive-value was below 62% (and even dropped to below 20% for longer time distances from death), while the negative-predictive-value significantly exceeded 90% for all analyses. The utilization of and costs for emergency transport as well as emergency and any hospital visits as well as the utilization of conventional outpatient care and laboratory services were consistently found most relevant for predicting mortality. All models showed useful accuracies, and more complex models showed advantages. The variables employed for prediction were consistent across models and with medical reasoning. Identifying individuals at risk could assist tailored decision-making and interventions.

Improved Surface Layer Erosion of Pit and Fissure Caries Lesions in Preparation for Resin Infiltration.

The penetration of a low-viscosity resin (infiltrant) into caries lesions depends on the erosion of the relatively impermeable surface layer (SL) that covers the lesion body. The present study aimed to evaluate the effect of different abrasive pretreatments on erosion of the SL and on penetration of an infiltrant into occlusal caries lesions, simultaneously. Sixty extracted human molars showing International Caries Detection and Assessment System (ICDAS-2) lesions were randomly allocated to 5 groups. A small area of each lesion was covered with resin before etching. Twelve lesions each were etched with either 15% HCl-gel (H120) or 37% H3PO4-gel (P120) for 120 s. Furthermore, the standard 15% HCl-gel or either one of two experimental etchants (HCl-gel or H3PO4-gel, each including abrasives) were applied for either 120 s or 30 s using a brush (surface pressure 150 g) (H30B, P120BA, H30BA). After rinsing and drying, all lesions were infiltrated for 180 s (Icon; DMG). From each tooth sections were prepared and visualized using confocal microscopy. SL of unetched areas and the lesion depth were 33 (23/51) µm and 537 (274/876) µm, respectively, both not differing significantly between groups. H120, H30B, and H30BA showed significantly higher SL reduction compared with P120 or P120BA, but only for H30BA SL was eroded almost completely (p < 0.05; Mann-Whitney test). Compared to other groups, occlusal lesions were significantly more infiltrated in H30BA (p < 0.05; Mann-Whitney test). HCl-gel including abrasives that was rubbed onto the enamel surface with a brush seems to be most effective to erode SLs of caries lesion situated in fissures and enable an almost complete subsequent resin infiltration.

Posterior ceramic versus metal restorations: A systematic review and meta-analysis.

OBJECTIVES: The goal of this systemic review and meta-analysis was to evaluate the longevity of indirect adhesively-luted ceramic compared to conventionally cemented metal single tooth restorations. DATA: Randomized controlled trials (RCT) investigating indirect adhesively-luted ceramic restorations compared to metal or metal-based cemented restorations in permanent posterior teeth. SOURCES: Three electronic databases (PubMed, CENTRAL (Cochrane) and Embase) were screened. No language or time restrictions were applied. Study selection, data extraction and quality assessment were done in duplicate. Risk of Bias and level of evidence was graded using Risk of Bias 2.0 tool and Grade Profiler 3.6. RESULTS: A total of 3056 articles were found by electronic databases. Finally, four RCTs were selected. Overall, 443 restorations of which 212 were adhesively-luted ceramic restorations and 231 conventionally cemented metal restorations have been placed in 314 patients (age: 22-72 years). The highest annual failure rates were found for ceramic restorations ranging from 2.1% to 5.6%. Lower annual failure rates were found for metal (gold) restorations ranging from 0% to 2.1%. Meta-analysis could be performed for adhesively-luted ceramic vs. conventionally cemented metal restorations. Conventionally cemented metal restoration showed a significantly lower failure rate than adhesively-luted ceramic ones (visual-tactile assessment: Risk Ratio (RR)[95%CI]=0.31[0.16,0.57], low level of evidence). Furthermore, all studies showed a high risk of bias. CONCLUSION: Conventionally cemented metal restorations revealed significantly lower failure rates compared to adhesively-luted ceramic ones, although the selected sample was small and with medium follow-up periods with high risks of bias.

Hyperparameter Tuning and Automatic Image Augmentation for Deep Learning-Based Angle Classification on Intraoral Photographs-A Retrospective Study.

We aimed to assess the effects of hyperparameter tuning and automatic image augmentation for deep learning-based classification of orthodontic photographs along the Angle classes. Our dataset consisted of 605 images of Angle class I, 1038 images of class II, and 408 images of class III. We trained ResNet architectures for classification of different combinations of learning rate and batch size. For the best combination, we compared the performance of models trained with and without automatic augmentation using 10-fold cross-validation. We used GradCAM to increase explainability, which can provide heat maps containing the salient areas relevant for the classification. The best combination of hyperparameters yielded a model with an accuracy of 0.63-0.64, F1-score 0.61-0.62, sensitivity 0.59-0.65, and specificity 0.80-0.81. For all metrics, it was apparent that there was an ideal corridor of batch size and learning rate combinations; smaller learning rates were associated with higher classification performance. Overall, the performance was highest for learning rates of around 1-3 × 10-6 and a batch size of eight, respectively. Additional automatic augmentation improved all metrics by 5-10% for all metrics. Misclassifications were most common between Angle classes I and II. GradCAM showed that the models employed features relevant for human classification, too. The choice of hyperparameters drastically affected the performance of deep learning models in orthodontics, and automatic image augmentation resulted in further improvements. Our models managed to classify the dental sagittal occlusion along Angle classes based on digital intraoral photos.

Segmentation of Dental Restorations on Panoramic Radiographs Using Deep Learning.

Convolutional Neural Networks (CNNs) such as U-Net have been widely used for medical image segmentation. Dental restorations are prominent features of dental radiographs. Applying U-Net on the panoramic image is challenging, as the shape, size and frequency of different restoration types vary. We hypothesized that models trained on smaller, equally spaced rectangular image crops (tiles) of the panoramic would outperform models trained on the full image. A total of 1781 panoramic radiographs were annotated pixelwise for fillings, crowns, and root canal fillings by dental experts. We used different numbers of tiles for our experiments. Five-times-repeated three-fold cross-validation was used for model evaluation. Training with more tiles improved model performance and accelerated convergence. The F1-score for the full panoramic image was 0.7, compared to 0.83, 0.92 and 0.95 for 6, 10 and 20 tiles, respectively. For root canals fillings, which are small, cone-shaped features that appear less frequently on the radiographs, the performance improvement was even higher (+294%). Training on tiles and pooling the results thereafter improved pixelwise classification performance and reduced the time to model convergence for segmenting dental restorations. Segmentation of panoramic radiographs is biased towards more frequent and extended classes. Tiling may help to overcome this bias and increase accuracy.

Cost-effectiveness of AI for caries detection: randomized trial.

OBJECTIVES: We assessed the cost-effectiveness of AI-supported detection of proximal caries in a randomized controlled clustered cross-over superiority trial. METHODS: Twenty-three dentists were sampled to assess 20 bitewings; 10 were randomly evaluated supported by an AI-based software (dentalXrai Pro 1.0.4, dentalXrai Ltd, Berlin, Germany) and the other 10 without AI support. The reference test had been established by four independent experts and an additional review. We evaluated the proportion of true and false positive and negative detections and the treatment decisions assigned to each detection (non-invasive, micro-invasive, invasive). Cost-effectiveness was assessed using a mixed public-private-payer perspective in German healthcare. Using the accuracy and treatment decision data from the trial, a Markov simulation model was populated and posterior permanent teeth in initially 31-years old individuals followed over their lifetime. The model allowed extrapolation from the initial detection and therapy to treatment success, re-treatments and, eventually, tooth loss and replacement, capturing long-term effectiveness (tooth retention) and costs (cumulative in Euro). Costs were estimated using the German public and private fee catalogues. Monte-Carlo microsimulations were used and incremental cost-effectiveness at different willingness-to-pay ceiling thresholds assessed. RESULTS: In the trial, AI-supported detection was significantly more sensitive than detection without AI. However, in the AI group, lesions were more often treated invasively. As a result, AI and no AI showed identical effectiveness (tooth retention for a mean (2.5-97.5%) 49 (48-51) years) and nearly identical costs (AI: 330 (250-409) Euro, no AI: 330 (248-410) Euro). 41% simulations found AI and 43% no AI to be more cost-effective. The resulting cost-effectiveness remained uncertain regardless of a payer's willingness-to-pay. CONCLUSIONS: Higher accuracy of AI did not lead to higher cost-effectiveness, as more invasive treatment approaches generated costs and diminished possible effectiveness advantages. CLINICAL SIGNIFICANCE: The cost-effectiveness of AI could be improved by supporting not only caries detection, but also subsequent management.

Effects of the association of high fluoride- and calcium-containing caries-preventive agents with regular or high fluoride toothpaste on enamel: an in vitro study.

OBJECTIVES: The aim of this in vitro study was to compare the caries-preventive effect of various high fluoride- and calcium-containing caries-preventive agents (> 22.000 ppm F- [ppm]) in adjunct to use of regular (1450 ppm) or high (5000 ppm) fluoride toothpaste on sound as well as demineralized enamel. MATERIALS AND METHODS: Bovine enamel specimens (n = 276; 5 mm × 3.5 mm × 3 mm) having one sound surface [ST] and one artificial caries lesion [DT] were randomly allocated to 12 groups. Interventions before pH-cycling were no intervention ([SC1/SC5]), application of varnishes/solutions containing NaF (22,600 ppm; Duraphat [NaF1/NaF5]); NaF + tricalcium phosphate (22,600 ppm; Clinpro White Varnish [TCP1/TCP5]); NaF + CPP-ACP (22,600 ppm; MI Varnish [CPP1/CPP5]); silver diammine fluoride (35,400 ppm; Cariestop 30%[SDF1/SDF5]); and NaF + calcium fluoride (45,200 ppm; Biophat[CaF1/CaF5]). During pH-cycling (28 days, 6 × 120 min demineralization/day) half of the specimens in each group were brushed (10 s; 2 × /day) with either 1,450 (NaF; named, e.g., TCP1) or 5,000 ppm (NaF; e.g., TCP5) dentifrice slurry. Differences in integrated mineral loss (∆∆Z) and lesion depth (∆LD) were calculated between values after initial demineralization and after pH-cycling using transversal microradiography. RESULTS: After pH-cycling, SC1/SC5 showed significantly increased ∆ZDT/LDDT values, indicating further demineralization (p < 0.05; paired t-test). Decreased ∆ZDT values, indicating non-significant remineralization, could only be observed in CaF1/CaF5 (p > 0.05; paired t-test). Additional use of all varnishes/solutions significantly decreased ∆∆ZDT/∆∆ZST and ∆LDDT/∆LDST compared to SC1/SC5 (p < 0.05;ANCOVA). Between 1450 and 5000 ppm dentifrices, a significant difference in ∆∆ZDT/∆∆ZST and ∆LDDT/∆LDST could only be observed for SC1/SC5 (p < 0.05; ANCOVA). CONCLUSION: Under the conditions chosen, all fluoride varnishes/solutions significantly reduced demineralization. Furthermore, a significant dose-response characteristic for fluoride varnishes could be revealed. However, no additional benefit could be observed, when varnishes were combined with high fluoride instead of regular fluoride dentifrices. CLINICAL RELEVANCE: For children and adolescents with high caries risks varnishes containing more than 22,600 ppm should be further investigated, as they offered higher caries-preventive effects in vitro. Furthermore, there seems to be no difference in the demineralization-inhibitory capacity of fluoride varnishes when used in combination with either standard or highly fluoridated dentifrices.

Increasing dental zirconia micro-retentive aspect through ultra-short pulsed laser microstructuring: study on flexural strength and crystal phase characterization.

OBJECTIVES: Although ultra-short pulsed laser (USPL) microstructuring has previously improved zirconia bond-strength, it is yet unclear how different laser-machined surface microstructures and patterns may influence the material's mechanical properties. Therefore, the aim of this study was to assess the flexural strength of zirconia after different USPL settings creating three different geometrical patterns with structures in micrometer scale. METHODS: One hundred sixty zirconia bars (3Y-TZP, 21 × 4 × 2.1 mm) were prepared and randomly divided into five groups (n = 32): no surface treatment (negative control-NC); sandblasting with Al2O3 (SB); and three laser groups irradiated with USPL (Nd:YVO4/1064 nm/2-34 J/cm2/12 ps): crossed-lines (LC), random-hatching (LR), and parallel-waves (LW). Bars were subjected to a four-point flexural test (1 mm/min) and crystal phase content changes were identified by X-ray diffraction. Surface roughness and topography were analyzed through 3D-laser-profilometry and SEM. Data were analyzed with parametric tests for roughness and Weibull for flexural strength (α = 5%). RESULTS: LR (Mean[95%CI]: 852.0 MPa, [809.2-894.7]) was the only group that did not show a significantly different flexural strength than NC (819.8 MPa, [796.6-842.9]), (p > 0.05). All laser groups exhibited higher Weibull moduli than NC and SB, indicating higher reliability and homogeneity of the strength data. An increase of monoclinic phase peak was only observed for SB. CONCLUSION: In conclusion, USPL created predictable, homogeneous, highly reproducible, and accurate surface microstructures on zirconia ceramic. The laser-settings of random-hatching (12 ps pulses) increased 3Y-TZP average surface roughness similarly to SB, while not causing deleterious crystal phase transformation or loss of flexural strength of the material. Furthermore, it has increased the Weibull modulus and consequently material's reliability. CLINICAL SIGNIFICANCE: Picosecond laser microstructuring (LR conditions) of 3Y-TZP ceramic does not decrease its flexural strength, while increasing materials realiability and creating highly reproducible and accurate microstructures. These features may be of interest both for improving clinical survival of zirconia restorations as well as enhancing longevity of zirconia implants.

Costs for Statutorily Insured Dental Services in Older Germans 2012-2017.

OBJECTIVES: We assessed the costs of dental services in statutorily insured, very old (geriatric) Germans. METHODS: A comprehensive sample of very old (≥75 years) people insured at a large Northeastern statutory insurer was followed over 6 years (2012-2017). We assessed dental services costs for: (1) examination, assessments and advice, (2) operative, (3) surgical, (4) prosthetic, (5) periodontal, (6) preventive and (7) outreach services. Association of utilization with: (1) sex, (2) age, (3) region, (4) social hardship status, (5) International Disease Classification (ICD-10) diagnoses and (6) Diagnoses Related Groups (DRGs) was explored. RESULTS: 404,610 individuals with a mean (standard deviation, SD) age 81.9 (5.4 years) were followed, 173,733 did not survive follow-up. Total mean costs were 129.61 (310.97) euro per capita; the highest costs were for prosthetic (54.40, SD 242.89 euro) and operative services (28.40, SD 68.38 euro), examination/advice (21.15, SD 28.77 euro), prevention (13.31, SD 49.79 euro), surgery (5.91, SD 23.91 euro), outreach (4.81, SD 28.56 euro) and periodontal services (1.64, SD 7.39 euro). The introduction of new fee items for outreach and preventive services between 2012 and 2017 was reflected in costs. Total costs decreased with increasing age, and this was also found for all service blocks except outreach and preventive services. Costs were higher in those with social hardship status, and in Berlin than Brandenburg and Mecklenburg-Western Pomerania. Certain general health conditions were associated with increased or decreased costs. CONCLUSIONS: Costs were associated with sex, social hardship status, place of living and general health conditions. CLINICAL SIGNIFICANCE: Dental services costs for the elderly in Germany are unequally distributed and, up to a certain age or health status, generated by invasive interventions mainly. Policy makers should incentivize preventive services earlier on and aim to distribute expenses more equally.

Molar-incisor hypomineralisation: narrative review on etiology, epidemiology, diagnostics and treatment decision.

Molar-incisor hypomineralisation (MIH) is clinically defined as demarcated structural enamel defects affecting at least one first permanent molar with or without the involvement of incisors. It is foremost a qualitative developmental defect of systemic origin. The prevalence for MIH is estimated at 12.9% with significant differences between countries. Its etiology and pathogenesis are still not completely understood. Several environmental and medical causes have been suggested to alter enamel maturation. The hypomineralised enamel may collapse shortly after eruption and as a consequence caries lesions seem more likely to develop. Besides cavitation, hypersensitivity and/or pain are the hallmarks of clinical symptoms. Both are associated with increased dental anxiety and fear of children suffering from MIH. Consequently, patients' care and management are challenging and necessitates a large range of non-, micro- and invasive strategies. MIH might be mixed up with three different other types of developmental defects in the enamel: fluorosis, enamel hypoplasia, and amelogenesis imperfecta. Careful diagnostic differentiation should be made before starting any dental treatment. A recent published classification system links the severity of the lesion to a treatment need index. This index is based on four values regarding two key symptoms: hypersensitivity and post-eruptiv enamel breakdown (PEB). Without PEB sealing is strongly recommended in order to prevent caries. For hypersensitive teeth as well as those with PEB use of glass ionomer cement as an intermediate cover, but mainly composite resins are materials of choice. For improvement of aesthetically compromised MIH-incisors, the resin infiltration technique has been proposed.

Restoration of teeth affected by molar-incisor hypomineralisation: a systematic review.

The objective was to systematically analyse clinical studies on restorative procedures for teeth affected by molar-incisor hypomineralisation (MIH). The databases PubMed, Embase, and Cochrane Library were searched. Only retrospective and prospective clinical studies dealing with sealing or restoration of MIH-affected teeth were included. The language was restricted to English or German. Thirteen of 36 potentially eligible studies were included focusing on the following subjects: extension of enamel preparation, adhesive procedures prior to restoration, application of fissure sealants as well as restoration with conventional glass ionomer cements (GIC), resin modified glass ionomer cements (RMGIC), resin composites, and indirect restorations. Seven clinical studies were controlled trials. However, only two included MIH-unaffected teeth as control. No meta-analysis was performed due to the heterogeneity of study designs (e.g. severity of MIH or the restorative materials investigated). Based on the present analysis, the annual failure rates were in average 21% for fissure sealants, 22% for GIC, 1-6% for RMGIC, 13-32% for resin composites, and 0-7% for indirect restorations. In summary, only few tendencies can be deduced from this review at a low level of evidence (number of studies): 1) preparation margins in sound enamel seem to be superior to preparations in hypomineralised enamel (1 study), 2) RMGIC seems to be superior to GIC (3 studies), 3) resin composites may be used for restoring all severities of MIH (7 studies) with self-etch and etch-and-rinse adhesive systems generally not performing differently (3 studies), and 4) in cases of severe MIH, indirect restorations showed a good clinical success (4 studies).

Mechanical Properties of Teeth Restored after Selective Caries Excavation. Systematic Review and Meta-Analysis / Propiedades Mecánicas de Dientes Restaurados tras la Remoción Selectiva de Caries: revisión Sistemática y Metaanálisis

The aim of this study was to systematically review the literature of in vitro studies comparing the mechanical properties of teeth restored after selective caries excavation (SCE) and complete caries excavation (CCE). The PubMed/MEDLINE and EMBASE electronic databases were searched systematically. In vitro studies investigating the mechanical properties of teeth restored after SCE, were independently checked by two authors. Inclusion criteria were: (1) performing SCE (2) mentioning the teeth were later restored, and (3) evaluating mechanical properties of the restored teeth. Meta-analysis was performed with and without discriminating between shallow and deep lesions. From 1,859 potentially eligible studies, 14 were selected for full text analysis and 5 were included in the meta- analysis. Fracture resistance was significantly lower after SCE than after CCE in overall analysis (SMD[95%CI]=-1.62[-3.04,-0.20]) and for deep lesion (SMD[95%CI]=-1.62[-2.62,-0.61]), whereas cuspal deflection at 200 and 400N was significantly higher after SCE than after CCE for discriminated and non- discriminated analyses. Furthermore, for shallow lesions the risk of catastrophic fracture was significantly lower after SCE than CCE (RR[95%CI]=0.58[0.43,0.78]). The included studies presented low and medium risk of bias. The mechanical behavior of restored teeth seems to be affected by the excavation strategy. Although there is a tendency for lower fracture resistance and higher cuspal deflection after SCE, there is a lower risk of catastrophic failure when compared to CCE. However, this conclusion is based on very few in vitro studies.

El objetivo de este estudio fue revisar sistemáticamente la literatura de estudios in vitro que comparan las propiedades mecánicas de los dientes restaurados después de la excavación selectiva de caries (ESC) y la excavación de caries completa (ECC). Se realizaron búsquedas sistemáticas en las bases de datos electrónicas PubMed / MEDLINE y EMBASE. Los estudios in vitro que investigan las propiedades mecánicas de los dientes restaurados después de la ESC fueron verificados de forma independiente por dos autores. Los criterios de inclusión fueron: (1) realizar ESC (2) mencionar que los dientes fueron posteriormente restaurados y (3) evaluar las propiedades mecánicas de los dientes restaurados. El metanálisis se realizó con y sin discriminación entre lesiones superficiales y profundas. De 1.859 estudios potencialmente elegibles, se seleccionaron 14 para el análisis de texto completo y 5 se incluyeron en el metanálisis. La resistencia a la fractura fue significativamente menor después de ESC que después de CCE en el análisis general (DME [IC del 95 %] = - 1,62 [-3,04, -0,20]) y para la lesión profunda (DME [IC del 95 %] = - 1,62 [-2,62, - 0,61]), mientras que la deflexión de las cúspides a 200 y 400 N fue significativamente mayor después de ESC que después de CCE para análisis discriminados y no discriminados. Además, para las lesiones superficiales, el riesgo de fractura catastrófica fue significativamente menor después de ESC que de CCE (RR [IC 95 %] = 0,58 [0,43,0,78]). Los estudios incluidos presentaron riesgo de sesgo bajo y medio. El comportamiento mecánico de los dientes restaurados parece verse afectado por la estrategia de excavación. Aunque existe una tendencia a una menor resistencia a la fractura y una mayor deflexión de la cúspide después de la ESC, existe un menor riesgo de falla catastrófica en comparación con la CCE. Sin embargo, esta conclusión se basa en muy pocos estudios in vitro.

Salivary pellicle modification with polyphenol-rich teas and natural extracts to improve protection against dental erosion.

OBJECTIVE: To investigate the modification of the salivary pellicle with different polyphenol-rich teas and natural extracts for the protection against dental erosion. METHODS: We performed two experiments: one with teas (Green tea, Black tea, Peppermint tea, Rosehip tea, negative control [NC]) and other with natural extracts (Grape seed, Grapefruit seed, Cranberry, Propolis, NC), where NC was deionized water. A total of 150 enamel specimens were used (n = 15/group). Both experiments followed the same design, consisting of 5 cycles of: salivary pellicle formation (30 min, 37 °C), modification with the solutions (30 min, 25 °C), further salivary pellicle formation (60 min, 37 °C) and erosive challenge (1 min, 1% citric acid, pH 3.6). Relative surface microhardness (rSMH), relative surface reflection intensity (rSRI) and amount of calcium release (CaR) were evaluated. Data were analysed with Kruskal-Wallis and Wilcoxon rank sum tests with Bonferroni correction (α = 0.05). RESULTS: Regarding teas, Black and Green teas showed the best protection against dental erosion, presenting higher rSMH and lower CaR than NC. Peppermint tea was not different to NC and Rosehip tea caused erosion, showing the highest CaR and greatest loss of SMH and SRI. Regarding natural extracts, Grape seed and Grapefruit seed extracts presented the best protective effect, with significantly higher rSMH and lower CaR. Cranberry caused significantly more demineralization; and Propolis did not differ from NC. CONCLUSION: Green tea, Black tea, Grape seed extract and Grapefruit seed extract were able to modify the salivary pellicle and improve its protective effect against enamel erosion, but Rosehip tea and Cranberry extract caused erosion. CLINICAL RELEVANCE: Some some bio-products, such as teas and natural extracts, improve the protective effect of the salivary pellicle against enamel erosion. More studies should be performed in order to test the viability of their use as active ingredients for oral care products.

Longevity and Risk Factors of Post Restorations after up to 15 Years: A Practice-based Study.

INTRODUCTION: The aims of this multicenter, practice-based cohort study were to evaluate the success and survival of endodontically treated teeth with post restorations (ETT+Ps) and to analyze factors associated with the longevity of ETT+Ps. METHODS: Eight general dental practitioners each placed up to 27 ETT+Ps without any restriction to post materials or dimensions. Only incisors, canines, and premolars were included. At the last follow-up visit, ETT+Ps were considered as successful if the post and the initially placed definitive restoration were sufficient, whereas ETT+Ps were considered as survived if the post was still in function. Multilevel Cox proportional hazards models were used to evaluate the association between a range of predictors and time until no success and no survival. RESULTS: Overall, 195 endodontic posts in 195 patients were followed up for a mean (95% confidence interval) of 91 (81-101) months; the longest follow-up was 15 years. Of these, 122 ETT+Ps were considered successful (estimated success time = 110 [101-120] months), and 152 ETT+Ps survived [estimated survival time = 133 [124-141] months). Regarding the categories of success and survival, the annual failure rates were 6.0% and 3.3%, respectively. Recementation of old (telescopic) crowns after placing new posts was the only significant predictor for decreased time until failure for both success and survival analyses. By excluding recemented restorations, annual failure rates decreased to 3.5% and 2.1%, respectively. CONCLUSIONS: For EET+Ps placed in a private practice setting, high success and survival rates were observed. If old (telescopic) crowns were recemented after new posts were placed, the high risk of subsequent failure should be considered and communicated with patients.