RESUMEN
Mixing fillers featured with wide band gaps in polymers can effectively meet the requirement of higher energy storage densities. However, the fundamental relationship between the crystal structures of fillers and the dielectric properties of the corresponding nanocomposites is still unclear. Accordingly, we introduced ultralow contents of the synthesized cubic Hafnium dioxide (c-HfO2) or monoclinic Hafnium dioxide (m-HfO2) as deep traps into poly(ether imide) (PEI) to explore their effects on dielectric properties and the charge-blocking mechanism. m-HfO2/PEI showed better charge trapping due to the higher electron affinity and deeper trap energy. At room temperature, the 0.4 vol % m-HfO2/PEI maintains an ultralow dielectric loss of 0.008 while obtaining a dielectric constant twice that of pure PEI at 1 kHz, simultaneously outperforming in terms of leakage current density, breakdown strength (452 kV mm-1), discharge energy density (Ud, 5.03 J cm-3), charge-discharge efficiency (η, 92%), and dielectric thermal stability. At 125 °C, it exhibits a considerable Ud of 2.48 J cm-3 and a high η of 85% at 300 kV mm-1, surpassing the properties of pure PEI. This promising work opens up a new path for studying HfO2-derived dielectrics with unique crystal structures.
RESUMEN
In this paper, poly-α-olefins (PAO) containing quaternary carbon centers were prepared by two-step oligomerization using a metallocene catalyst followed by a Ziegler-Natta catalyst. First, the 1-decene dimer was oligomerized with [t-BuN(Me)2C(η5-C5H4)]ZrCl2, and the effects of the oligomerization temperature, Al/Zr molar ratio, and catalyst loading on the oligomerization were investigated. In the second step, the obtained 1-decene dimers were copolymerized with 1-decene with TiCl4/Et2AlCl, and the effects of the catalysts, monomer/dimer ratio, and α-olefin species on the copolymerization were investigated. The composition and structure of the dimers and copolymerization products were characterized by gas chromatography (GC) and 1H NMR and 13C NMR spectroscopy. The results of GC and 13C NMR analyses indicated that the metallocene catalyzed the formation of the 1-decene oligomerization product, resulting in the branched olefin dimer being the major product, and the existence of quaternary carbons in the 1-decene/1-decene dimer copolymerization product could also be found. The polymerization mechanism for the formation of the quaternary carbon centers is proposed. The 1-decene/1-decene dimer copolymerization product containing quaternary carbon centers has a kinematic viscosity of 10.8 mm2/s at 100 °C, a viscosity index of 165, and a pour point of -52 °C; thus, the product with quaternary carbon centers has a better viscosity-temperature performance and low-temperature fluidity than those of the 1-decene oligomerization product and typical PAO products, but the kinematic viscosity is similar.