RESUMEN
Recent advances in sonic black hole (SBH) provide new opportunities for controlling sound waves and designing wave manipulation devices. SBH is a device that consists of partitions with gradually decreasing inner radii inserted into an acoustic duct. Several studies have reported that SBH can achieve a broadband sound absorption coefficient close to 1, avoiding the issue of alternating high and low absorption coefficients observed in traditional sound absorbers. However, the fundamental mechanisms and principles behind this behavior are not yet fully understood. This study aims to investigate the detailed sound absorption mechanisms of SBH, including the progressive slow-sound effect and the critical coupling condition that leads to broadband sound absorption. To achieve this goal, an analytical model based on the effective medium approach is developed to investigate the layer-by-layer retardation in sound propagation. The sound absorption coefficient is then determined based on the surface impedance calculation. The effective medium analysis reveals that SBH enables a unique condition to progressively decelerate wave propagation across its layers. As a result, the critical coupling condition becomes more easily established with smoothly increasing SBH partitions and more discretised layers, as elucidated by the complex frequency analysis results. The physical insights gained from this study reveal the distinctive features of SBH compared to classical sound absorbers, paving the way for its engineering applications.
RESUMEN
Heart failure is a global health concern with significant implications for healthcare systems. Left ventricular assist devices (LVADs) provide mechanical support for patients with severe heart failure. However, the placement of the LVAD outflow graft within the aorta has substantial implications for hemodynamics and can lead to aortic insufficiency during long-term support. This study employs computational fluid dynamics (CFD) simulations to investigate the impact of different LVAD outflow graft locations on aortic hemodynamics. The introduction of valve morphology within the aorta geometry allows for a more detailed analysis of hemodynamics at the aortic root. The results demonstrate that the formation of vortex rings and subsequent vortices during the high-velocity jet flow from the graft interacted with the aortic wall. Time-averaged wall shear stress (TAWSS) and oscillatory shear index (OSI) indicate that modification of the outflow graft location changes mechanical states within the aortic wall and aortic valve. Among the studied geometric factors, both the height and inclination angle of the LVAD outflow graft are important in controlling retrograde flow to the aortic root, while the azimuthal angle primarily determines the rotational direction of blood flow in the aortic arch. Thus, precise positioning of the LVAD outflow graft emerges as a critical factor in optimizing patient outcomes by improving the hemodynamic environment.
RESUMEN
This letter investigates an acoustic metamaterial exhibiting a unique sound pressure amplification mechanism for ultra-low frequency sound attenuation. The system is constructed by integrating a flexible panel into the side-branch duct of a Herschel-Quincke (HQ) tube. A new peak emerges in the Sound Transmission Loss (STL) at a frequency far lower than the frequencies of the HQ tube-induced STL peaks. It cannot, after careful comparisons, be attributed to any local resonances, including structural resonances of the flexible panel or air resonances inside the side-branch cavities. To explain the underlying physics, several numerical simulations are performed. The results reveal that analog to a mechanical inerter, a "push-pull" force is created by the sound pressure difference between the sub-cavities in which a pressure amplification mechanism is generated at the interface of the embedded panel. This force is large enough to activate an out-of-plane motion of the flexible panel, trapping the incident sound power in a circular flow around the duct-branch loop. The unique phenomenon is successfully reproduced in experiment, where the flexible panel is made of carbon fiber. The proposed acoustic metamaterial can be used as silencing components for ultra-low frequency noise control in duct.