RESUMEN
OBJECTIVES: This study aims to evaluate the reliability of AI-generated STL files in diagnosing osseous changes of the mandibular condyle and compare them to a ground truth (GT) diagnosis made by six radiologists. METHODS: A total of 432 retrospective CBCT images from four universities were evaluated by six dentomaxillofacial radiologists who identified osseous changes such as flattening, erosion, osteophyte formation, bifid condyle formation, and osteosclerosis. All images were evaluated by each radiologist blindly and recorded on a spreadsheet. All evaluations were compared and for the disagreements, a consensus meeting was held online to create a uniform GT diagnosis spreadsheet. A web-based dental AI software was used to generate STL files of the CBCT images, which were then evaluated by two dentomaxillofacial radiologists. The new observer, GT, was compared to this new STL file evaluation, and the interclass correlation (ICC) value was calculated for each pathology. RESULTS: Out of the 864 condyles assessed, the ground truth diagnosis identified 372 cases of flattening, 185 cases of erosion, 70 cases of osteophyte formation, 117 cases of osteosclerosis, and 15 cases of bifid condyle formation. The ICC values for flattening, erosion, osteophyte formation, osteosclerosis, and bifid condyle formation were 1.000, 0.782, 1.000, 0.000, and 1.000, respectively, when comparing diagnoses made using STL files with the ground truth. CONCLUSIONS: AI-generated STL files are reliable in diagnosing bifid condyle formation, osteophyte formation, and flattening of the condyle. However, the diagnosis of osteosclerosis using AI-generated STL files is not reliable, and the accuracy of diagnosis is affected by the erosion grade.
Asunto(s)
Osteofito , Osteosclerosis , Tomografía Computarizada de Haz Cónico Espiral , Humanos , Cóndilo Mandibular/diagnóstico por imagen , Osteofito/diagnóstico por imagen , Osteofito/patología , Estudios Retrospectivos , Reproducibilidad de los Resultados , Tomografía Computarizada de Haz Cónico/métodos , Osteosclerosis/diagnóstico por imagen , Articulación TemporomandibularRESUMEN
This study aims to generate and also validate an automatic detection algorithm for pharyngeal airway on CBCT data using an AI software (Diagnocat) which will procure a measurement method. The second aim is to validate the newly developed artificial intelligence system in comparison to commercially available software for 3D CBCT evaluation. A Convolutional Neural Network-based machine learning algorithm was used for the segmentation of the pharyngeal airways in OSA and non-OSA patients. Radiologists used semi-automatic software to manually determine the airway and their measurements were compared with the AI. OSA patients were classified as minimal, mild, moderate, and severe groups, and the mean airway volumes of the groups were compared. The narrowest points of the airway (mm), the field of the airway (mm2), and volume of the airway (cc) of both OSA and non-OSA patients were also compared. There was no statistically significant difference between the manual technique and Diagnocat measurements in all groups (p > 0.05). Inter-class correlation coefficients were 0.954 for manual and automatic segmentation, 0.956 for Diagnocat and automatic segmentation, 0.972 for Diagnocat and manual segmentation. Although there was no statistically significant difference in total airway volume measurements between the manual measurements, automatic measurements, and DC measurements in non-OSA and OSA patients, we evaluated the output images to understand why the mean value for the total airway was higher in DC measurement. It was seen that the DC algorithm also measures the epiglottis volume and the posterior nasal aperture volume due to the low soft-tissue contrast in CBCT images and that leads to higher values in airway volume measurement.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Tomografía Computarizada de Haz Cónico Espiral , Algoritmos , Inteligencia Artificial , Tomografía Computarizada de Haz Cónico/métodos , Humanos , Faringe/diagnóstico por imagenRESUMEN
Abstract Introduction: In the pediatric population, computed tomography examination of the upper cervical spine plays an important role in the diagnosis of neurological injuries involving that region. Due to the interconnected nature of the craniofacial structures, a structural change in one is expected to also cause changes in the other structures. Objective: The aim of this study was to evaluate relationships between atlantodental interval, cervical vertebral morphology, and facial structure in healthy adolescents using cone beam computed tomography. Methods: Thirty subjects aged 14-20 years (10 males, mean age: 17.2 years; 20 females, mean age: 17.9 years) were included in the study. The anterior, lateral and posterior atlantodental intervals, and vertical and anteroposterior dimensions of the first and second cervical vertebrae were evaluated from cone beam computed tomography images. Facial morphology was evaluated using 7 parameters on lateral cephalometric cone beam computed tomography images and 6 parameters on posteroanterior images. The Mann-Whitney U test and Wilcoxon test were used for statistical analyses. Results: Comparisons between males and females showed that most parameters were larger in males, with significant differences in vertical facial dimensions (anterior lower face height: p= 0.05; anterior upper face height: p= 0.001), (distance between the most internal point of the frontozygomatic suture and midsagittal reference plane; p= 0.01), (the distance between the deepest point of the right alveolar maxillar process and midsagittal reference plane; p= 0.001), and C2 vertebral dimensions. The anterior and lateral atlantodental interval values correlated with maxilla position relative to the mandible angle, and the anterior atlantodental interval correlated with lower anterior facial height (p= 0.05). Dimensional measurements of the C1 and C2 vertebrae were correlated with both anterior facial heights and some posteroanterior parameters. Conclusion: Sagittal, vertical, and transverse facial dimensions and positions were strongly associated with C1 and C2 vertebral dimensions, and the maxillomandibular relationship may affect atlantodental interval. Therefore, including craniofacial features in assessment of the atlantodental area and vertebral distances in adolescents may be beneficial.
Resumo Introdução: Na população pediátrica, a tomografia computadorizada da coluna cervical alta tem um importante papel no diagnóstico de lesões neurológicas que envolvem essa região. Devido à natureza interconectada das estruturas craniofaciais, espera-se que uma mudança estrutural em uma delas também cause alterações nas outras estruturas. Objetivo: Avaliar as relações entre o intervalo atlantodental, a morfologia vertebral cervical e a estrutura facial em adolescentes saudáveis com a tomografia computadorizada de feixe cônico. Método: Trinta indivíduos entre 14 e 20 anos (10 homens, média de 17,2 anos; 20 mulheres, média de 17,9 anos) foram incluídos no estudo. O intervalo atlantodental anterior, lateral e posterior e as dimensões vertical e anteroposterior da primeira e segunda vértebras cervicais foram avaliados a partir de imagens de tomografia computadorizada de feixe cônico. A morfologia facial foi avaliada utilizando-se sete parâmetros em imagens de tomografia computadorizada de feixe cônico cefalométricas laterais e seis parâmetros em imagens posteroanteriores. O teste U de Mann-Whitney e o teste de Wilcoxon foram utilizados para as análises estatísticas. Resultados: As comparações entre homens e mulheres mostraram que em sua maioria os parâmetros foram maiores no sexo masculino, com diferenças significantes nas dimensões faciais verticais (altura facial anterior inferior: p = 0,05; altura facial anterior superior: p = 0,001), distância entre o ponto mais interno da sutura fronto-zigomática e plano de referência médio-sagital; p = 0,01distância entre o ponto mais profundo do processo alveolar do maxilar direito e o plano de referência médio-sagital; p = 0,001) e as dimensões do corpo vertebral C2. O intervalo atlantodental anterior e lateral correlacionaram-se com o ângulo da posição da maxila em relação à mandíbula e o intervalo atlantodental anterior correlacionou-se com altura facial anterior inferior (p = 0,05). Medidas das dimensões das vértebras C1 e C2 foram correlacionadas com as alturas faciais anteriores e alguns parâmetros póstero-anteriores. Conclusão: As dimensões e posições faciais sagitais, verticais e transversais foram fortemente associadas às dimensões dos corpos vertebrais C1 e C2 e a relação maxilomandibular pode afetar o intervalo atlantodental. Portanto, incluir características craniofaciais na avaliação da área atlantodental e das distâncias vertebrais em adolescentes pode ser benéfico.
Asunto(s)
Humanos , Masculino , Femenino , Adolescente , Adulto Joven , Cara/anatomía & histología , Tomografía Computarizada de Haz Cónico , Mandíbula , Vértebras Cervicales/diagnóstico por imagen , CefalometríaRESUMEN
OBJECTIVE: This study aimed to evaluate the radiomorphometric indexes and fractal dimension (FD) on dental panoramic radiography (DPR) of Thalassemia Major (TM) patients. METHODS: In 59 TM patients and in 59 healthy control subjects, mandibular cortical index (MCI), mandibular cortical width (MCW), panoramic mandibular index (PMI), and FD of four different regions (FD1-4) were evaluated and compared using DPRs. RESULTS: The distribution of MCI in TM patients was similar to control subjects (p > 0.05). The mean MCW was significantly lower in TM patients (p = 0.001). There was no significant difference in PMI between TM patients and control subjects. The mean of FD measured in the supracortical area above the angle of mandible (FD2), in the anterior to the mental foramen (FD4) and mean FD of four different regions was significantly lower in TM patients (p = 0.003, p = 0.001, and p = 0.014, respectively). CONCLUSIONS: The radiomorphometric indices and fractal dimensions evaluated in the panoramic radiograph are capable of identifying thalassemia patients' jaw bone, and the results of DPR scanning can be used to refer these patients to appropriate medical investigation.
Asunto(s)
Fractales , Talasemia , Densidad Ósea , Humanos , Mandíbula/diagnóstico por imagen , Radiografía PanorámicaRESUMEN
INTRODUCTION: In the pediatric population, computed tomography examination of the upper cervical spine plays an important role in the diagnosis of neurological injuries involving that region. Due to the interconnected nature of the craniofacial structures, a structural change in one is expected to also cause changes in the other structures. OBJECTIVE: The aim of this study was to evaluate relationships between atlantodental interval, cervical vertebral morphology, and facial structure in healthy adolescents using cone beam computed tomography. METHODS: Thirty subjects aged 14-20â¯years (10 males, mean age: 17.2â¯years; 20 females, mean age: 17.9â¯years) were included in the study. The anterior, lateral and posterior atlantodental intervals, and vertical and anteroposterior dimensions of the first and second cervical vertebrae were evaluated from cone beam computed tomography images. Facial morphology was evaluated using 7 parameters on lateral cephalometric cone beam computed tomography images and 6 parameters on posteroanterior images. The Mann-Whitney U test and Wilcoxon test were used for statistical analyses. RESULTS: Comparisons between males and females showed that most parameters were larger in males, with significant differences in vertical facial dimensions (anterior lower face height: pâ¯=â¯0.05; anterior upper face height: pâ¯=â¯0.001), (distance between the most internal point of the frontozygomatic suture and midsagittal reference plane; pâ¯=â¯0.01), (the distance between the deepest point of the right alveolar maxillar process and midsagittal reference plane; pâ¯=â¯0.001), and C2 vertebral dimensions. The anterior and lateral atlantodental interval values correlated with maxilla position relative to the mandible angle, and the anterior atlantodental interval correlated with lower anterior facial height (pâ¯=â¯0.05). Dimensional measurements of the C1 and C2 vertebrae were correlated with both anterior facial heights and some posteroanterior parameters. CONCLUSION: Sagittal, vertical, and transverse facial dimensions and positions were strongly associated with C1 and C2 vertebral dimensions, and the maxillomandibular relationship may affect atlantodental interval. Therefore, including craniofacial features in assessment of the atlantodental area and vertebral distances in adolescents may be beneficial.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Cara , Mandíbula , Adolescente , Cefalometría , Vértebras Cervicales/diagnóstico por imagen , Cara/anatomía & histología , Femenino , Humanos , Masculino , Adulto JovenRESUMEN
PURPOSE: The aim of this study was to examine the anatomy and variations of the infraorbital foramen and its surroundings via morphometric measurements using cone beam computed tomography (CBCT) scans derived from a 3D volumetric rendering program. METHODS: 354 sides of CBCT scans from 177 patients were examined in this study. DICOM data from these images were exported to Maxilim® software in order to generate 3D surface models. The morphometric measurements were done for infraorbital foramen (IOF), infraorbital groove (IOG) and infraorbital canal (IOC). All images were evaluated by 1 radiologist. To assess intra-observer reliability, the Wilcoxon matched-pairs signed rank test was used. Differences between sex, side, age and measurements were evaluated using chi-square and paired t-test and measurements were evaluated using 1-way ANOVA tests. Differences were considered significant when p<0.05. RESULTS: The most common shape was oval for IOF and parallel for IOC without any accessory foramen. The results showed that females have smaller dimensions for the measurements between the two foramen rotundum (FR), FR-IOF, sella-FR, center of the IOF (cIOF)-nasion (N), cIOF-NB (nasion-B) (p>0.05). No significant difference was found according to age groups (p>0.05). CONCLUSIONS: These results provide detailed knowledge of the anatomical characteristics in this particular area. CBCT imaging with lower radiation dose and thin slices can be a powerful tool for anesthesia procedures like infra orbital nerve blocks, for surgical approaches like osteotomies and neurectomies and also for generating artificial prostheses.
Asunto(s)
Cefalometría/métodos , Tomografía Computarizada de Haz Cónico , Maxilar/diagnóstico por imagen , Órbita/diagnóstico por imagen , Adolescente , Adulto , Anciano , Órganos Artificiales , Femenino , Humanos , Imagenología Tridimensional , Masculino , Maxilar/anatomía & histología , Persona de Mediana Edad , Órbita/anatomía & histología , Adulto JovenRESUMEN
This study used micro-CT to compare three obturation techniques with respect to void occurrence in canals filled with bioceramic sealer. Thirty extracted first mandibular premolars were prepared with a ProTaper Universal system and randomly allocated to three groups. Canals were obturated with gutta-percha and bioceramic root canal sealer, using either single-cone, lateral compaction, or Thermafil filling technique. Each tooth was then scanned with micro-CT. Voids in 2D cross-sectional images and void volumes in 3D images of all root thirds were assessed in relation to obturation technique. There was no significant difference between obturation techniques in the proportion of sections with voids (P > 0.05). However, the results of the obturation techniques significantly differed in relation to root region (P < 0.05). In conclusion, no root filling technique resulted in void-free specimens. Void volumes were highest for the single-cone technique and lowest for Thermafil, in all regions (P < 0.05).