Clinical and socio-demographic factors associated with dental extractions in a clinical sample.

The objective of the present study was to identify the reasons for dental extractions in patients seeking dental care in a university dental clinic in Mexico. This is a cross-sectional study that assessed 284 consecutive patients at the School of Dentistry, Autonomous University of the State of Mexico between August 2017 and November 2018. In total, 505 extractions were performed. The dependent variable was the reason for extraction: 0) dental caries and ensuing sequels (reference category); 1) periodontal disease and ensuing sequels; and 2) other reasons. Sociodemographic, socioeconomic, and clinical variables were included as independent variables. The analysis was done with multinomial logistic regression (Stata 14.0). Out of all extractions, 63.6% (n=321) were due to dental caries and ensuing sequels; 22.0% (n=111) were due to periodontal disease and ensuing sequels; 5.3% (n=27) endodontic failure; 5.1% (n=26) prosthetic indications; 1.6% (n=8) orthodontic indications; and the rest (2.4%) were due to other reasons. In the multivariate model extractions due to periodontal disease vs dental caries were associated with occasionally smoking tobacco (Odds Ratio, OR=3.90) or daily tobacco use (OR=3.19); the tooth to be extracted having been previously restored (OR=2.35); extracted anterior as opposed to posterior teeth (OR =2.63); and patients with multiple extractions (OR=2.68). In the case of extractions due to "other reasons", no variable was significant. Dental caries and periodontal disease were the main reasons for dental extraction in this sample. Several variables, mostly clinical, were associated with extractions for periodontal reasons.

Clinical and socio-demographic factors associated with dental extractions in a clinical sample

Abstract The objective of the present study was to identify the reasons for dental extractions in patients seeking dental care in a university dental clinic in Mexico. This is a cross-sectional study that assessed 284 consecutive patients at the School of Dentistry, Autonomous University of the State of Mexico between August 2017 and November 2018. In total, 505 extractions were performed. The dependent variable was the reason for extraction: 0) dental caries and ensuing sequels (reference category); 1) periodontal disease and ensuing sequels; and 2) other reasons. Sociodemographic, socioeconomic, and clinical variables were included as independent variables. The analysis was done with multinomial logistic regression (Stata 14.0). Out of all extractions, 63.6% (n=321) were due to dental caries and ensuing sequels; 22.0% (n=111) were due to periodontal disease and ensuing sequels; 5.3% (n=27) endodontic failure; 5.1% (n=26) prosthetic indications; 1.6% (n=8) orthodontic indications; and the rest (2.4%) were due to other reasons. In the multivariate model extractions due to periodontal disease vs dental caries were associated with occasionally smoking tobacco (Odds Ratio, OR=3.90) or daily tobacco use (OR=3.19); the tooth to be extracted having been previously restored (OR=2.35); extracted anterior as opposed to posterior teeth (OR =2.63); and patients with multiple extractions (OR=2.68). In the case of extractions due to "other reasons", no variable was significant. Dental caries and periodontal disease were the main reasons for dental extraction in this sample. Several variables, mostly clinical, were associated with extractions for periodontal reasons.

Resumo O objetivo do presente estudo foi identificar os motivos das extrações dentárias em pacientes que procuram atendimento odontológico em uma clínica odontológica universitária no México. Este é um estudo transversal que avaliou 284 pacientes consecutivos na Faculdade de Odontologia da Universidad Autónoma del Estado de México entre agosto de 2017 e novembro de 2018. No total, foram realizadas 505 extrações. A variável dependente foi o motivo da extração: 0) cárie dentária e sequelas subsequentes (categoria de referência); 1) doença periodontal e sequelas subsequentes; e 2) outros motivos. Variáveis sociodemográficas, socioeconômicas e clínicas foram incluídas como variáveis independentes. A análise foi feita com regressão logística multinomial (Stata 14.0). De todas as extrações, 63,6% (n=321) foram devidas a cárie dentária e sequelas subsequentes; 22,0% (n=111) foram devidas a doença periodontal e sequelas subsequentes; 5,3% (n=27) a insucesso endodôntico; 5,1% (n=26) a indicações protéticas; 1,6% (n=8) a indicações ortodônticas; e o restante (2,4%) foi devido a outros motivos. No modelo multivariado, as extrações por doença periodontal vs. cárie dentária foram associadas ao tabagismo ocasional (Odds Ratio, OR=3,90) ou ao uso diário de tabaco (OR=3,19); ao fato de o dente a ser extraído ter sido restaurado anteriormente (OR=2,35); à extração de dentes anteriores em vez de posteriores (OR=2,63); e a pacientes com extrações múltiplas (OR=2,68). No caso de extrações devido a "outros motivos", nenhuma variável foi significativa. A cárie dentária e a doença periodontal foram os principais motivos de extração dentária nessa amostra. Diversas variáveis, principalmente clínicas, foram associadas às extrações por motivos periodontais.

Enhancement of fluoride release in glass ionomer cements modified with titanium dioxide nanoparticles.

BACKGROUND: Several efforts have been made to improve the glass ionomer cements (GICs) properties with nanotechnology. Fluoride release in once of most beneficial properties of GICs. The purpose of this study was to evaluate the fluoride release, recharge, and cytotoxicity in GICs reinforced with titanium dioxide nanoparticles (TiO2N). OBJECTIVE: Evaluate the fluoride release, recharge, and cytotoxicity in GICs reinforced with TiO2N. METHODS: Four GICs, FUJI IX EXTRA (G1c), KETAC MOLAR (G2c), IONOFILL MOLAR (G3c), and FUJI IX (G4c) were combined with TiO2N (G1e, G2e, G3e, and G4e) and divided into blocks of 5-mm width and 1-mm thickness 10 each. A total of 80 samples were arranged as follows: GICs alone as negative control (n = 40) and GICs + TiO2N as experimental groups (n = 40). The fluoride release was determined for periods of 1, 2, 6, 10, 31, 90, 180, 240, and 300 days. On days 30 and 179, samples were recharged by submerging in 1 mL of 20,000 ppm sodium fluoride gel. Cytotoxic activity was carried out with gingival fibroblasts, using 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide cell viability assay. RESULTS: The experimental groups obtained the highest and more constant fluoride released when compared to control groups. After the first recharge, experimental groups (G1e, G3e, and G4e) showed statistically significant results (P = .001, 0.010, and 0.001 respectively) enhancing their recharge ability regarding control groups. The second recharge showed better results in G1e concerning the rest of the groups. No cytotoxic activity was observed in all experimental groups, although significant differences were observed in G3e and G4e regarding control group. CONCLUSION: The incorporation of TiO2N enhance the fluoride release in glass ionomers with a noncytotoxic effect on human gingival fibroblasts.

Mechanical Properties and Antibacterial Effect on Mono-Strain of Streptococcus mutans of Orthodontic Cements Reinforced with Chlorhexidine-Modified Nanotubes.

Recently, several studies have introduced nanotechnology into the area of dental materials with the aim of improving their properties. The objective of this study is to determine the antibacterial and mechanical properties of type I glass ionomers reinforced with halloysite nanotubes modified with 2% chlorhexidine at concentrations of 5% and 10% relative to the total weight of the powder used to construct each sample. Regarding antibacterial effect, 200 samples were established and distributed into four experimental groups and six control groups (4 +ve and 2 -ve), with 20 samples each. The mechanical properties were evaluated in 270 samples, assessing microhardness (30 samples), compressive strength (120 samples), and setting time (120 samples). The groups were characterized by scanning electron microscopy and Fourier transform infrared spectroscopy, and the antibacterial activity of the ionomers was evaluated on Streptococcus mutans for 24 h. The control and positive control groups showed no antibacterial effect, while the experimental group with 5% concentration showed a zone of growth inhibition between 11.35 mm and 11.45 mm, and the group with 10% concentration showed a zone of growth inhibition between 12.50 mm and 13.20 mm. Statistical differences were observed between the experimental groups with 5% and 10% nanotubes. Regarding the mechanical properties, microhardness, and setting time, no statistical difference was found when compared with control groups, while compressive strength showed higher significant values, with ionomers modified with 10% concentration of nanotubes resulting in better compressive strength values. The incorporation of nanotubes at concentrations of 5% and 10% effectively inhibited the presence of S. mutans, particularly when the dose-response relationship was taken into account, with the advantage of maintaining and improving their mechanical properties.