Emulsification and stabilisation technologies used for the inclusion of lipophilic functional ingredients in food systems.

Food industry is increasingly using functional ingredients to improve the food product quality. Lipid-containing functional ingredients are important sources of nutrients. This review examines the current state of emulsification and stabilisation technologies for incorporating lipophilic functional ingredients into food systems. Lipophilic functional ingredients, such as omega-3 fatty acids, carotenoids, and fat-soluble vitamins, offer numerous health benefits but present challenges due to their limited solubility in water-based food matrices. Emulsification techniques enable the dispersion of these ingredients in aqueous environments, facilitating their inclusion in a variety of food products. This review highlights recent advances in food emulsion formulation, emulsification methods and stabilisation techniques which, together, improve the stability and bioavailability of lipophilic compounds. The role of various emulsifiers, stabilizers, and encapsulation materials in enhancing the functionality of these ingredients is also explored. Furthermore, the review discusses different stabilisation techniques which can yield in emulsion in a solid or liquid state. By providing a comprehensive overview of current technologies, this review aims to guide future research and application in the development of functional foods enriched with lipophilic ingredients.

Effect of wall material on lipophilic functional compounds of high oleic palm oil emulsions encapsulated by Refractance Window drying.

High-oleic palm oil is a food-grade oil with desirable properties, as it is characterised by having an oleic acid concentration above 50 % and a high vitamin E and provitamin A content. This study investigated the effect of different combinations of two wall materials (whey protein (WP) and Capsul®, a commercial octenyl succinic anhydride modified starch (OSA-MS)) on the concentration of provitamin A, vitamin E and oleic acid, and the physical properties of high oleic palm oil emulsions encapsulated by Refractance Window drying technology. Wall material composition significantly affected (p < 0.05) all response variables, and R2 values were above 0.75 for all responses. Phytonutrient preservation showed its highest at an OSA-MS: WP concentration ratio of 1: 3. Optimal results were achieved (minimum moisture content, water activity and hygroscopicity, and maximum encapsulation efficiency and phytonutrient preservation) at an OSA-MS concentration of 8.13 % and WP concentration of 91.87 %. Flakes were obtained as a solid structure that protects oil's phytonutrients with 94 %, 75 % and 87 % of preservation of oleic acid, vitamin E and carotenoids, respectively. It shows that the wall material combination and encapsulation technique are suitable for obtaining lipophilic functional compounds.

Significant differences in black and brown carbon concentrations at urban and suburban sites.

Light-absorbing carbonaceous particles (LAC) may cause and/or exacerbate non-communicable diseases, interfere with the Earth's radiative balance, darken urban buildings and impair vistas. In this study, we explored the temporal behaviour of LAC concentrations measured at wavelengths of 370 nm (brown carbon, BrC) and 880 nm (black carbon, BC) at two sites of a mid-sized city in Brazil. We observed sharp changes in LAC concentrations at the city centre site in response to variations in traffic volume. The highest concentrations were observed when winds originated from both the city core and from the direction of the bus terminal. The suburban site exhibited a notably uniform diurnal pattern and consistently lower LAC concentrations throughout the day. Nevertheless, substantial increases during the evening led to mean BrC and BC concentrations (2.6 and 2.2 µg m-3, respectively) comparable to daytime peaks observed in the city centre (3 µg m-3 and 2.5 µg m-3). This phenomenon was attributed to the burning of residential waste and overgrown vegetation in nearby vacant lots. Moreover, the highest concentrations coincided with periods of low wind speeds, usually linked to non-buoyant plumes from point sources. BrC concentrations surpassed BC concentrations, even at the city centre site. Not only was the Ångström absorption exponent (Å370/880) larger at the suburban site compared to the city centre (95th percentiles of 1.73 and 1.38, respectively), but it also exhibited a wider span. Overall, the combined LAC and Å370/880 data indicated that i) biomass burning is a major source of LAC at the suburban site; ii) at the city centre, bare BC particles may become internally mixed with BrC from biomass or fossil fuel emissions and enhance absorption at lower wavelengths. The occurrence of LAC peaks outside the evening rush hours suggests that other sources but on-road vehicular emissions may contribute to the deterioration of the air quality in the urban core. Tackling air quality across the urban perimeter requires targeting other potential sources but traffic emissions.

Effect of grinding, extraction time and type of coffee on the physicochemical and flavour characteristics of cold brew coffee.

The effects of grinding (medium-coarse) and extraction time (14-22 h) on the physicochemical and sensorial properties of cold brew coffee produced using two types of Colombian specialty coffees (Huila and Nariño) were evaluated. Cold coffee brewed under coarse grinding and 22 h of extraction exhibited the highest values of total dissolved solids, extraction yield, pH, titratable acidity (TA), and total phenolic content. The type of coffee used mainly affected the TA and pH. All cold brew coffee samples had lower TA values than their hot counterparts. Nariño cold brew samples had higher TA values than those of Huila in all treatments evaluated. Higher scores were reported in the sensorial evaluation of cold brew coffee when prepared using the shortest time (14 h) and coarse grinding for both coffee types. These coffees were characterized by strong sweetness, fruity and floral flavours, medium bitterness and acidity, and a creamy body. Furans, pyrazines, ketones, aldehydes, pyrroles, esters, lactones, furanones, and phenols were detected as odour-active compounds. The findings of this study demonstrate that the particle size, contact time, and coffee type affect the physicochemical and sensorial characteristics of cold brew coffee, leading to cold brew coffees with different flavour profiles.

Encapsulation of Lactobacillus fermentum K73 by Refractance Window drying.

The purpose of this work was to model the survival of the microorganism and the kinetics of drying during the encapsulation of Lactobacillus fermentum K73 by Refractance Window drying. A whey culture medium with and without addition of maltodextrin were used as encapsulation matrices. The microorganism with the encapsulation matrices was dried at three water temperatures (333, 343 and 353 K) until reaching balanced moisture. Microorganism survival and thin layer drying kinetics were studied by using mathematical models. Results showed that modified Gompertz model and Midilli model described the survival of the microorganism and the drying kinetics, respectively. The most favorable process conditions found with the mathematical modelling were a drying time of 2460 s, at a temperature of 353 K. At these conditions, a product with 9.1 Log CFU/g and a final humidity of 10% [wet basis] using the culture medium as encapsulation matrix was obtained. The result shows that Refractance Window can be applied to encapsulate the microorganism probiotic with a proper survival of the microorganism.

Multi-plate freeze concentration: Recovery of solutes occluded in the ice and determination of thawing time.

The retention of solutes in the ice formed in a falling-film freeze concentrator (multi-plate freeze-concentrator) was analysed. Solutions of fructose, glucose and sucrose and a simulated juice with initial concentrations of 5, 10, 15 and 20 °Brix were freeze concentrated. The ice produced in the four steps of the process retains solutes at levels of 1.0-8.8 °Brix (expressed as solute mass fraction in the ice). The recovery of these solutes during thawing can increase overall system efficiency. All thawing steps were carried out dividing the sample in 10 fractions at 20 ℃. The first thawed fractions showed solute concentrations that were 1.9-3.3 times higher than the mean solute mass fraction in the ice, while the last fractions of ice showed very low levels of retained solutes, less than 0.2 times the mean solute mass fraction in the ice. It was found that fractionated thawing can recover most of the solute content in the ice. The procedure presented in the present study allows the determination of the solute concentration achieved in the various thawing fractions and predicts the thawing time required for a given form factor, melting temperature and initial solute mass fraction in the ice.