Meta-Analysis of the Global Mortality Rate Due to Infection in Burn Patients Admitted for Plastic Surgery.

Burn patients are generally prone to infection, which causes the patient's condition to be even worse. However, there is no study regarding the difference between the mortality rate of infected and non-infected patients. Therefore, the aim was to identify and compare the global mortality rate between infected and non-infected patients who were admitted to plastic surgery units. We searched PubMed, ScienceDirect, and Google Scholar and finally included five articles for this meta-analysis. We determined the odds ratio (OR) value by forest plot and assessed the study bias by a funnel plot. We also analyzed the quality and heterogeneity. The OR was determined as 0.43 (95%CI: 0.07-2.60), indicating a higher mortality rate in infected burn patients as compared to non-infected patients. The funnel plot showed no significant study bias. The quality of the studies was assessed high as well, and the heterogeneity was determined significant (I2>75%). The sensitivity analysis with the fixed effect model reconfirmed our main outcome. However, as a study limitation, we could not specifically determine the impact of strain-specific infection on the mortality rate and could not find more relevant research regarding this issue. We conclude that the overall non-infected burn patient mortality rate is lower as compared to the infected burn patients; however, non-infected patients can be prone to death if the burn degree is higher, the respiratory organ is injured, or the treatment is poor or delayed.

Toxicity and bioassimilation of lead and nickel in farm ruminants fed on diversified forage crops grown on contaminated soil.

The cultivation of forage crops on wastewater-irrigated soils, while common in many developing countries, poses significant risks due to heavy metal pollution, particularly Lead (Pb) and Nickel (Ni). This practice, aimed at addressing water scarcity challenges and providing affordable irrigation, was investigated for its ecological and human health implications across three diverse sites (site A, site B, and site C). Our study unveiled increases in Pb concentrations in contaminated soil, cultivated with Sesbania bispinosa showing the highest Pb accumulation. The Ni concentrations ranged from 5.34 to 10.43 across all forage crop samples, with S. fruticosa from site C displaying the highest Ni concentration and S. bicolor from site A exhibiting the lowest. Trace element concentrations in the specimens were determined using an atomic absorption spectrophotometer. The Pb levels in the blood, hair, and feces of farm ruminants (cows, buffaloes, and sheep) varied across the sites, with buffaloes consistently displaying the highest Pb levels. Insights into daily Pb intake by ruminant's highlighted variations influenced by plant species, animal types, and sites, with site C, the cows exhibiting the highest Health Risk Index (HRI) associated with lead exposure from consuming forage crops. Soil and forage samples showed Pb concentrations ranging from 8.003 to 12.29 mg/kg and 6.69-10.52 mg/kg, respectively, emphasizing the severe health risks associated with continuous sewage usage. Variations in Ni concentrations across animal blood, hair, and feces samples underscored the importance of monitoring Ni exposure in livestock, with sheep at site B consistently showing the highest Ni levels. These findings highlight the necessity of vigilance in monitoring trace element (Pb and Ni) exposure in forage crops and livestock, to mitigate potential health risks associated with their consumption, with variations dependent on species, site, and trace element concentrations.

Therapeutic potential of boswellic acids: an update patent review (2016-2023).

INTRODUCTION: Boswellic acids (BAs) are a group of pentacyclic triterpenoids of the ursane and oleanane type. They have shown very interesting biological properties that have led to the development of a number of synthesis protocols. Both natural BAs and their synthetic derivatives may be useful in the treatment of a variety of cancers, viral infections and inflammatory diseases. AREAS COVERED: This review covers patents relating to the therapeutic activities of natural BAs and their synthetic derivatives. The latest patented studies of boswellic acids (are summarized by using the keywords 'boswellic acid,' in SciFinder, PubMed, and Google Patents and databases in the year from 2016 to 2023. EXPERT OPINION: Boswellic acids have shown potent antiviral, anticancer and anti-inflammatory potential. Few BAs analogues have been prepared by modification at the C24-CO2H functional groups. In particular, the C-24 amide and amino analogues have shown enhanced anticancer effects compared to the parent AKBA. In addition, BAs have the ability to form conjugates with other antiviral, anti-inflammatory and anticancer drugs that synergistically enhance their biological efficacy. In addition, this conjugation strategy will increase the solubility and bioavailability of BAs, which is one of the most important issues in the development of BAs.

Enhancing water stress tolerance of bread wheat during seed germination and seedling emergence: caffeine-induced modulation of antioxidative defense mechanisms.

Better crop stand establishment, a function of rapid and uniform seedling emergence, depends on the activities of germination-related enzymes, which is problematic when there is insufficient soil moisture. Different ways are in practice for counteracting this problem, including seed priming with different chemicals, which are considered helpful in obtaining better crop stand establishment to some extent through improved seed germination and seedling emergence. In this growth room experiment, caffeine was used as a seed priming agent to improve germination under moisture scarcity. Polyethylene glycol-8000 (18%) was added to Hoagland's nutrient solution to create drought stress (-0.65 MPa). The experiment was arranged in a completely randomized design (CRD), having four replications of each treatment. A newly developed wheat genotype SB-1 was used for the experimentation. Different doses of caffeine, i.e., 4 ppm, 8 ppm, 12 ppm, and 16 ppm, including no soaking and water soaking, were used as seed priming treatments. Water deficit caused oxidative stress and adversely affected the seed germination, seedling vigor, activities of germination enzymes, photosynthetic pigments, and antioxidative defense mechanism in roots and shoots of seedlings. Caffeine seed priming ameliorated the negative effects of water deficit on seed germination and seedling vigor, which was attributed to the reduction in lipid peroxidation and improvement in the activities of germination-related enzymes like glucosidase, amylase, and protease. Conclusively, seed priming with 12 ppm caffeine outperformed the other treatments and hence is recommended for better crop stand establishment under conditions of soil moisture deficit.

Sustainability assessment of machining Al 6061-T6 using Taguchi-grey relation integrated approach.

Modern machining requires reduction in energy usage, surface roughness, and burr width to produce finished or near-finished parts. To ensure high surface quality in machining processes, it is crucial to minimize surface finish and minimize burr width, which are considered as significant parameters as specific cutting energy. The objective of this study was to identify the optimal machining parameters for milling in order to minimize surface roughness, burr width, and specific cutting energy. To achieve this, the research investigated the impact of feed per tooth, cutting speed, depth of cut, and number of inserts on the responses across three intervals using Taguchi L9 array. Observing the responses by varying these parameters, underlined the need for multi objective optimisation. Machining conditions of 0.14 mm/tooth f z , 350 m/min V c and 2 mm ap using 1 cutting insert (exp no 9) was identified as the best machining run using grey relational analysis owing to its highest grey relational grade of 0.936. ANOVA examination identified cutting speed as the leading factor impacting the grey relational grade with 31.07 % contribution ratio, with the number of inserts, depth of cut, and feed per tooth also making notable contributions. Conclusively, machining parameters identified through response surface optimisation resulted in 21.69 % improvement in surface finish, 11.39 % reduction in specific energy consumption, and 6.2 % decrease in burr width on the down milling side albeit with an increase of 9 % in burr width on the up-milling side.

Aloe-inspired eco-friendly synthesis of Ag/ZnO heterostructures: boosting photocatalytic potential.

The current research focuses on the development of Ag-ZnO heterostructures through a "bottom-up" approach involving the assembly and extraction of Aloe barbadensis Miller gel. These heterostructures composed of metals/semiconductor oxide display distinct and notable optical, electrical, magnetic, and chemical properties that are not found in single constituents and also exhibit photocatalytic applications. These synthesized heterostructures were characterized by XRD, FTIR, SEM, and UV-visible spectroscopy. The high peak intensity of the Ag/ZnO composite shows the high crystallinity. The presence of Ag-O, Zn-O, and O-H bonding is verified using FTIR analysis. SEM analysis indicated the formation of spherical shapes of Ag/ZnO heterostructures. The Zn, O, and Ag elements are further confirmed by EDX analysis. Ag-ZnO heterostructures exhibited excellent photocatalytic activity and stability against the degradation of tubantin red 8BL dye under visible light irradiation.

Enhanced wheat productivity in saline soil through the combined application of poultry manure and beneficial microbes.

BACKGROUND: Soil salinity is one of the major menaces to food security, particularly in dealing with the food demand of the ever-increasing global population. Production of cereal crops such as wheat is severely affected by soil salinity and improper fertilization. The present study aimed to examine the effect of selected microbes and poultry manure (PM) on seedling emergence, physiology, nutrient uptake, and growth of wheat in saline soil. A pot experiment was carried out in research area of Institute of Soil and Environmental Sciences, University of Agriculture, Faisalabad, Pakistan. Saline soil (12 dS m- 1 w/w) was developed by spiking using sodium chloride, and used in experiment along with two microbial strains (i.e., Alcaligenes faecalis MH-2 and Achromobacter denitrificans MH-6) and PM. Finally, wheat seeds (variety Akbar-2019) were sown in amended and unamended soil, and pots were placed following a completely randomized design. The wheat crop was harvested after 140 days of sowing. RESULTS: The results showed a 10-39% increase (compared to non-saline control) in agronomic, physiological, and nutritive attributes of wheat plants when augmented with PM and microbes. Microbes together with PM significantly enhanced seedling emergence (up to 38%), agronomic (up to 36%), and physiological (up to 33%) in saline soil as compared to their respective unamended control. Moreover, the co-use of microbes and PM also improved soil's physicochemical attributes and enhanced N (i.e., 21.7%-17.1%), P (i.e., 24.1-29.3%), and K (i.e., 28.7%-25.3%) availability to the plant (roots and shoots, respectively). Similarly, the co-use of amendments also lowered the Na+ contents in soil (i.e., up to 62%) as compared to unamended saline control. This is the first study reporting the effects of the co-addition of newly identified salt-tolerant bacterial strains and PM on seedling emergence, physiology, nutrient uptake, and growth of wheat in highly saline soil. CONCLUSION: Our findings suggest that co-using a multi-trait bacterial culture and PM could be an appropriate option for sustainable crop production in salt-affected soil.

Online teaching experience of the healthcare faculty during the pandemic: A cross sectional analysis.

BACKGROUND: COVID-19 pandemic had disrupted the teaching in most of the educational institutes worldwide. It has tested the readiness of educational institutes in their ability to deal with crisis. OBJECTIVE: This study aimed to determine the perception of health sciences faculty toward online education during the period of pandemic in Pakistan. METHODS: This cross-sectional research determined the perception using online survey which had been taken from the study conducted by Almahasees et al. Questions related to faculty's perception regarding IT skills, online classes taking more effort than on-campus learning, online platforms having adequate tools to facilitate teaching. Data was analyzed using SPSS. Statistical tests comprised of descriptive statistics and Kruskal-Walli's test. RESULTS: From a total of 318 participants, there were 234 females and 84 males. A statistically significant association was identified between field of specialization and competency to teach online (p = 0.022). Faculty stated that more efforts were required to teach online (p <  0.001). Most of the tutors reported virtual sessions helped improved the interaction with their students (p <  0.001). Most of the time faculty had to prompt students to complete their assignments on time (p <  0.001). Many of the faculty members disagreed that delivering virtual sessions from home was quite ineffective (p = 0.221) and reported experiencing distractions (p <  0.001). CONCLUSION: This study showed that online learning proved less effective than face-to-face learning. The main drawback of distance learning was the lack of teacher-student interaction. Online learning promotes student-centered learning and could be applied in situations of crisis like the COVID-19 pandemic.

The Hidden Toll of Psychological Distress in Australian Adults and Its Impact on Health-Related Quality of Life Measured as Health State Utilities.

BACKGROUND: Psychological distress (PD) is a major health problem that affects all aspects of health-related quality of life including physical, mental and social health, leading to a substantial human and economic burden. Studies have revealed a concerning rise in the prevalence of PD and various mental health conditions among Australians, particularly in female individuals. There is a scarcity of studies that estimate health state utilities (HSUs), which reflect the overall health-related quality of life in individuals with PD. No such studies have been conducted in Australia thus far. OBJECTIVE: We aimed to evaluate the age-specific, sex-specific and PD category-specific HSUs (disutilities) in Australian adults with PD to inform healthcare decision making in the management of PD. METHODS: Data on age, sex, SF-36/SF6D responses, Kessler psychological distress (K10) scale scores and other characteristics of N = 15,139 participants (n = 8149 female individuals) aged >15 years were derived from the latest wave (21) of the nationally representative Household, Income and Labor Dynamics in Australia survey. Participants were grouped into the severity categories of no (K10 score: 10-19), mild (K10: 20-24), moderate (K10: 25-29) and severe PD (K10: 30-50). Both crude and adjusted HSUs were calculated from participants' SF-36 profiles, considering potential confounders such as smoking, marital status, remoteness, education and income levels. The calculations were based on the SF-6D algorithm and aligned with Australian population norms. Additionally, the HSUs were stratified by age, sex and PD categories. Disutilities of PD, representing the mean difference between HSUs of people with PD and those without, were also calculated for each group. RESULTS: The average age of individuals was 46.130 years (46% male), and 31% experienced PD in the last 4 weeks. Overall, individuals with PD had significantly lower mean HSUs than those likely to be no PD, 0.637 (95% confidence interval [CI] 0.636, 0.640) vs 0.776 (95% CI 0.775, 0.777) i.e. disutility: -0.139 [95% CI -0.139, -0.138]). Mean disutilities of -0.108 (95% CI -0.110, -0.104), -0.140 (95% CI -0.142, -0.138), and -0.188 (95% CI -0.190, -0.187) were observed for mild PD, moderate PD and severe PD, respectively. Disutilities of PD also differed by age and sex groups. For instance, female individuals had up to 0.049 points lower mean HSUs than male individuals across the three classifications of PD. There was a clear decline in health-related quality of life with increasing age, demonstrated by lower mean HSUs in older population age groups, that ranged from 0.818 (95% CI 0.817, 0.818) for the 15-24 years age group with no PD to 0.496 (95% CI 0.491, 0.500) for the 65+ years age group with severe PD). Across all ages and genders, respondents were more likely to report issues in certain dimensions, notably vitality, and these responses did not uniformly align with ageing. CONCLUSIONS: The burden of PD in Australia is substantial, with a significant impact on female individuals and older individuals. Implementing age-specific and sex-specific healthcare interventions to address PD among Australian adults may greatly alleviate this burden. The PD state-specific HSUs calculated in our study can serve as valuable inputs for future health economic evaluations of PD in Australia and similar populations.

An environmental perspective of energy consumption, overpopulation, and human capital barriers in South Asia.

Prior literature is substantive in highlighting the nexus between pollutant and socio-economic predictors; however, the role of human interaction has not been sufficiently explored. Thus, the present study examines the validity of the environmental Kuznets Curve (EKC) hypothesis in the presence of energy consumption, overpopulation, and human capital index in five South Asian countries. It employs fixed effects, random effects, and dynamic panel causality techniques with a set of panel data from 1972 to 2021. The baseline results validate the existence of the EKC hypothesis in the recipient panel. Nevertheless, the findings reveal that energy consumption and population density have positive effects, while human capital has negative impacts on CO2 emissions. Furthermore, the study observes that energy consumption and per capita GDP have a significant causal link with CO2 emissions, whereas CO2 emissions are evident to have causality with population density and human capital index. The results are robust and suggest that the consolidation of an effective regulatory framework and technological improvements are substantial measures to improve environmental quality in South Asia. Moreover, allocating sufficient resources to uplift contemporary educational and health status would be imperative to improving environmental quality as aspired to by the Paris Agreement.

Biofilm producing plant growth promoting bacteria in combination with glycine betaine uplift drought stress tolerance of maize plant.

Introduction: The escalating threat of drought poses a significant challenge to sustainable food production and human health, as water scarcity adversely impacts various aspects of plant physiology. Maize, a cornerstone in staple cereal crops, faces the formidable challenge of drought stress that triggers a series of transformative responses in the plant. Methods: The present study was carried out in two sets of experiments. In first experiment, drought stress was applied after maintaining growth for 45 days and then irrigation was skipped, and plant samples were collected at 1st, 3rd and 6th day of drought interval for evaluation of changes in plant growth, water relation (relative water content) and antioxidants activity by inoculating indigenously isolated drought tolerant biofilm producing rhizobacterial isolates (Bacillus subtilis SRJ4, Curtobacterium citreum MJ1). In the second experiment, glycine betaine was applied as osmoregulator in addition to drought tolerant PGPR to perceive modulation in photosynthetic pigments (Chlorophyll a and b) and plant growth under varying moisture stress levels (100, 75 and 50% FC). Results and discussion: Results of the study revealed upsurge in root and shoot length, fresh and dry biomass of root and shoot besides increasing chlorophyll contents in water stressed inoculated plants compared to uninoculated plants. Glycine betaine application resulted in an additional boost to plant growth and photosynthetic pigments, when applied in combination with bacterial inoculants. However, both bacterial inoculants behaved differently under drought stress as evident from their biochemical and physiological attributes. Isolate SRJ4 proved to be superior for its potential to express antioxidant activity, leaf water potential and relative water contents and drought responsive gene expression while isolate MJ1 showed exclusive increase in root dry biomass and plant P contents. Though it is quite difficult to isolate the bacterial isolates having both plant growth promoting traits and drought tolerance together yet, such biological resources could be an exceptional option to be applied for improving crop productivity and sustainable agriculture under abiotic stresses. By exploring the combined application of PGPR and glycine betaine, the study seeks to provide insights into potential strategies for developing sustainable agricultural practices aimed at improving crop resilience under challenging environmental conditions.

Microbes-assisted phytoremediation of lead and petroleum hydrocarbons contaminated water by water hyacinth.

An experiment was carried out to explore the impact of petroleum hydrocarbons (PHs)-degrading microbial consortium (MC) on phytoremediation ability and growth of water hyacinth (WH) plants in water contaminated with lead (Pb) and PHs. Buckets (12-L capacity) were filled with water and WH plants, PHs (2,400 mg L-1) and Pb (10 mg L-1) in respective buckets. Plants were harvested after 30 days of transplanting and results showed that PHs and Pb substantially reduced the agronomic (up to 62%) and physiological (up to 49%) attributes of WH plants. However, the application of MC resulted in a substantial increase in growth (38%) and physiology (22%) of WH plants over uninoculated contaminated control. The WH + MC were able to accumulate 93% Pb and degrade/accumulate 72% of PHs as compared to initial concentration. Furthermore, combined use of WH plants and MC in co-contamination of PHs and Pb, reduced Pb and PHs contents in water by 74% and 68%, respectively, than that of initially applied concentration. Our findings suggest that the WH in combination with PHs-degrading MC could be a suitable nature-based water remediation technology for organic and inorganic contaminants and in future it can be used for decontamination of mix pollutants from water bodies.

Phytoremediation by aquatic macrophytes is a promising technique for the cleanup of environmental toxins from wastewater. To our knowledge, this is the first study reporting the integrated use of water hyacinth (WH) plants and a newly developed multi-trait microbial consortium for the simultaneous remediation of organic (i.e., petroleum hydrocarbons) and inorganic (i.e., lead) pollutants from the contaminated water. Findings of this study provide the basic but important information on the combined use of WH and microbes for remediation of mix pollution from water bodies.

Postoperative outcomes, predictors and trends of mortality and morbidity in patients undergoing hip fracture surgery with underlying aortic stenosis: a nationwide inpatient sample analysis.

BACKGROUND: Hip fractures frequently necessitate hospitalization, especially among patients aged 75 and above who might concurrently suffer from aortic stenosis (AS). This study focuses on postoperative outcomes, potential determinants of morbidity and mortality, as well as evolving trends in patients with AS undergoing surgical repair of hip fractures. METHODS: A retrospective analysis of the Nationwide Inpatient Sample from 2008 to 2019 was conducted. Hip fracture cases were identified, and a subgroup with AS was isolated using the ICD-9 and ICD-10 diagnostic codes. We compared baseline characteristics, postoperative in-hospital outcomes and trends in mortality and morbidity between patients with and without AS. RESULTS: From the dataset, 2,834,919 patients with hip fracture were identified on weighted analysis. Of these, 94,270 (3.3%) were found to have concurrent AS. The AS cohort was characterized by higher mean age and elevated burden of cardiovascular comorbidities, such as coronary artery disease, peripheral vascular disease, pulmonary hypertension, congestive heart failure and cardiac arrhythmias. Postoperative mortality following hip fracture surgery was greater in the AS groups compared to non-AS group (3.3% vs 1.57%, p < 0.001). Risk factors such as congestive heart failure (OR, 2.3[CI, 2.1-2.6]), age above 85 years (OR, 3.2[CI, 2.2-4.7]), cardiac arrhythmias (OR, 2.4[CI, 2.2-2.6]), end-stage renal disease (OR, 3.4[CI, 2.7-4.1]), malnutrition (OR, 2.3[CI, 2.1-2.7]) and AS (OR, 1.2[CI, 1.08-1.5] were associated with increased adjusted odds of postoperative mortality. AS was linked to higher adjusted odds of postoperative mortality (OR, 1.2 [CI, 1.1-1.5]) and complications such as acute myocardial infarction (OR, 1.2 [CI, 1.01-1.4]), cardiogenic shock (OR, 2.0[CI, 1.4-2.9]) and acute renal failure (OR, 1.1[CI, 1.02-1.2]). While hospital stay duration was comparable in both groups (average 5 days), the AS group incurred higher costs (mean $50,673 vs $44,607). The presence of acute heart failure in patients with AS and hip fracture significantly increased mortality, hospital stay, and cost. A notable decline in postoperative in-hospital mortality was observed in both groups from 2008-2019 though the rate of major in-hospital complications rose. CONCLUSION: AS significantly influences postoperative in-hospital mortality and complication rates in hip fracture patients. While a reduction in postoperative mortality was observed in both AS and non-AS cohorts, the incidence of major in-hospital complications increased across both groups.

Effect of Mn Doped on Structural, Optical, and Dielectric Properties of BiFe1-xMnxO3 for Efficient Antioxidant Activity.

Manganese-doped bismuth ferrites were synthesized using the coprecipitation method with the green extract Azadirachta indica. Our incorporation of the transition element, manganese, into bismuth ferrites tackles the challenge of increased leakage current often observed in intrinsic bismuth ferrites. We gained key insights through a comprehensive examination of the structural, dielectric, and optical properties of these materials, utilizing Fourier transform infrared spectroscopy (FTIR), impedance spectroscopy, and UV-visible spectroscopy, respectively. The formation of an octahedral geometry was confirmed using the FTIR technique. UV-visible spectroscopy indicated that 2% Mn doping is optimal, while we obtained a low band gap energy (2.21 eV) and high refractive index (3.010) at this amount of doping. The manufactured materials exhibited the typical ferrite-like dielectric response, that is, the dielectric parameter gradually decreased as the frequency increased and then stayed constant in the high-frequency range. Using the diphenylpicrylhydrazyl (DPPH) free radical assay, we also examined the antioxidant activity of bismuth ferrites. We concluded that among different Mn-doped BiFeMnO3-based nanomaterials, the 2 wt % Mn-doped BiFeMnO3 shows the highest antioxidant activity. This finding substantiates the efficacy of the optimized material with regard to its potent antioxidant activity, positioning it as a promising candidate for potential biomedical applications.

Investigation of Dielectric, Mechanical, and Thermal Properties of Epoxy Composites Embedded with Quartz Fibers.

Polymer matrix wave transparent composites are used in a variety of high-speed communication applications. One of the applications of these involves making protective enclosures for antennas of microwave towers, air vehicles, weather radars, and underwater communication devices. Material performance, structural, thermal, and mechanical degradation are matters of concern as advanced wireless communication needs robust materials for radomes that can withstand mechanical and thermal stresses. These polymer composite radomes are installed externally on antennas and are exposed directly to ambient as well as severe conditions. In this research, epoxy resin was reinforced with a small amount of quartz fibers to yield an improved composite radome material compared to a pure epoxy composite with better thermal and mechanical properties. FTIR spectra, SEM morphology, dielectric constant (Ɛr) and dielectric loss (δ), thermal degradation (weight loss), and mechanical properties were determined. Compared to pure epoxy, the lowest values of Ɛr and δ were 3.26 and 0.021 with 30 wt.% quartz fibers in the composite, while 40% less weight loss was observed which shows its better thermal stability. The mechanical characteristics encompassing tensile and bending strength were improved by 42.8% and 48.3%. In high-speed communication applications, compared to a pure epoxy composite, adding only a small quantity of quartz fiber can improve the composite material's dielectric performance, durability, and thermal and mechanical strength.

Evaluating the Efficacy of Activated Carbon in Minimizing the Risk of Heavy Metals Contamination in Spinach for Safe Consumption.

Toxicity induced by heavy metals is a major concern in agriculture as it decreases crops' growth and yield and leads to the deterioration of food quality. Recently, activated carbon has been identified as a possible solution. It can potentially improve crop nutrition and immobilize heavy metals in soil. That is why a glasshouse trial was conducted to investigate the effects of sugarcane bagasse-derived biochar on spinach growth and the availability of cadmium (Cd) and chromium (Cr) in artificially contaminated soil. The soil was placed in pots and contaminated with Cd and Cr at a rate of 10 mg kg-1. Biochar was added to the soil at concentrations of 0 (control), 0 (contaminated control), 100, 150, and 200 g, and 10-day-old nursery spinach plants were transplanted to the pots. The results showed that applying 200 g of biochar significantly increased shoot weight (235 g), soil pH, electrical conductivity, and organic matter. The highest levels of Cd (27.71 mg kg-1) and Cr (20.44 mg kg-1) were observed in the contaminated control pots, while the lowest levels of Cd (16.80 mg kg-1) and Cr (9.80 mg kg-1) were found in pots treated with 200 g of biochar (2%). Similarly, the highest levels of Cd (35.80 mg kg-1) and Cr (40.24 mg kg-1) in the roots were found in the contaminated control pots, while the lowest levels of Cd (19.26 mg kg-1) and Cr (21.34 mg kg-1) were observed in pots treated with 200 g of biochar. Biochar application at a rate of 2% can immobilize Cd and Cr in the soil and improve chlorophyll contents, carotenoids, photosynthetic rate, transpiration rate, and stomatal conductance in spinach in Cd- and Cr-contaminated soils. Further long-term field studies will be necessary to determine the feasibility of applying biochar as an organic amendment for enhancing spinach growth and reducing Cd and Cr bioavailability in contaminated soil.

Recent progress in CRISPR-based bioengineering of microbial cell factories for important nutraceuticals synthesis.

Nutraceuticals are defined as food or food components with therapeutic capabilities that have few side effects and are regarded as a natural therapy for preventing the onset of several life-threatening illnesses. The use of microbial cell factories to produce nutraceuticals is considered to be sustainable and promising for meeting market demand. Among the diverse strategies for optimizing microbial cell factories, the CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats) system has emerged as a valuable tool for gene integration, deletion, activation, and downregulation. With the advent of multiplexed and precise CRISPR strategies, optimized microbial cell factories are revolutionizing the yield of nutraceuticals. This review focuses on the development of highly adaptable CRISPR strategies to optimize the production in microbial cell factories of some important nutraceuticals (belonging to the class of carotenoids, flavonoids, stilbenoids, polysaccharides, and nonprotein amino acids). Further, we highlighted current challenges related to the efficiency of CRISPR strategies and addressed potential future directions to fully harness CRISPR strategies to make nutraceutical synthesis in microbial cell factories an industrially favorable method.

Improving the Cycling Stability of Aqueous Zinc-Ion Batteries by Preintercalation of Polyaniline in Hydrated Vanadium Oxide.

This paper reports the synthesis and characterization of hydrated vanadium oxide (VOH) and chemically preintercalated polyanilines in VOH, labeled as PAVO-H as the cathode material for aqueous zinc-ion batteries. Synthesized PAVO-H has a high surface area and rod-shaped morphology. PAVO-H has an increased interlayer distance of 13.36 Å. PAVO-H offers high specific capacities of 330 and 225 mAh g-1 at 50 mA g-1 and 4 A g-1 of current densities, respectively, with a 92% capacity retention rate of over 3000 cycles. The preintercalation of polyaniline is likely to catalyze the redox reaction and facilitate and simplify transport kinetics. It is also possible that the preintercalation of polyaniline permits the insertion of large hydrated Zn ions and reduces the formation of zinc basic salts.

Efficient detoxification of textile wastewater by applying Chenopodium album nanoparticles and its application in simulated metal-bearing effluents removal.

Large-scale pollution of water and soils bodies is associated with the discharge of the untreated textile industry effluents. Halophytes grows on saline lands and accumulate secondary metabolites and other stress protective compounds. Utilization of Chenopodium album (halophytes) to synthesize zinc oxide (ZnO) and their efficiency to treat different concentrations of textile industry waste water is proposed in this study. Potential of nanoparticles textile industry waste water effluents was also analyzed by exposing different concentrations of nanoparticles (0 (control), 0.2, 0.5, 1 mg) and time intervals of 5, 10, and 15 days. The absorption peaks by UV region, FTIR and SEM analysis were used characterized on ZnO NPs for the first time. FTIR analysis showed the preens of various functional groups and vital phytochemicals that can play its role in the formation of nanoparticles that can be used for trace elements removal and bioremediation. SEM analysis indicated that the pure ZnO NPs synthesis ranged from 30 to 57 nm. Results shows that the green synthesis of halophytic nanoparticles presents maximum removal capacity after 15 days exposure to 1 mg of ZnO NPs. Hence, the prepared ZnO Nps from halophytes can be a viable solution for treating the textile industry effluents before they are discharged into water bodies for sustainable environmental growth and environmental safety.

The dynamic impact of renewable energy consumption, trade, and financial development on carbon emissions in low-, middle-, and high-income countries.

The present study confronts potential theoretical argument of dynamic and non-linear relationship between [Formula: see text] emissions, renewable energy consumption, trade, and financial development by using quantile regression that accounts for the role of development in explaining the stated nexus. The results show that renewable energy consumption reduces [Formula: see text] emissions in the short run in low-, middle-, and high-income countries. [Formula: see text] emissions plumet as country open up for trade and expand financial services for their people. It is found that trade openness and financial development decrease [Formula: see text] emissions at upper quantile in low-income countries. In the middle-income countries, the findings are not much different as reported in case of low-income countries. In the high-income countries, renewable energy consumption and trade openness lead to decrease in [Formula: see text] emissions at all income quantiles. The Dumitrescu-Hurlin (D-H) panel causality test draws a sturdy support of bi-directional causation between renewable energy and [Formula: see text] emissions in low-income countries. Based on this analysis, some important policy implications can be drawn. First, in advanced countries, restrictions on renewable energy do not have significant effect on environmental condition. However, in low-income countries, adoption of renewable energy can significantly reduce [Formula: see text] emissions. Second, low-income countries may combat rise in [Formula: see text] emissions by introducing new technologies in exploiting trade potentials that are necessary to acquire resources to adopt clean energy. Third, energy policies should be framed based on the stage of development of a country, share of renewable energy in its total energy mix, and environmental condition of the country.