Co-Culture of Halotolerant Bacteria to Produce Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Using Sewage Wastewater Substrate.

The focus of the current study was the use of sewage wastewater to obtain PHA from a co-culture to produce a sustainable polymer. Two halotolerant bacteria, Bacillus halotolerans 14SM (MZ801771) and Bacillus aryabhattai WK31 (MT453992), were grown in a consortium to produce PHA. Sewage wastewater (SWW) was used to produce PHA, and glucose was used as a reference substrate to compare the growth and PHA production parameters. Both bacterial strains produced PHA in monoculture, but a copolymer was obtained when the co-cultures were used. The co-culture accumulated a maximum of 54% after 24 h of incubation in 10% SWW. The intracellular granules indicated the presence of nucleation sites for granule initiation. The average granule size was recorded to be 231 nm; micrographs also indicated the presence of extracellular polymers and granule-associated proteins. Fourier transform infrared spectroscopy (FTIR) analysis of the polymer produced by the consortium showed a significant peak at 1731 cm-1, representing the C=O group. FTIR also presented peaks in the region of 2800 cm-1 to 2900 cm-1, indicating C-C stretching. Proton nuclear magnetic resonance (1HNMR) of the pure polymer indicated chemical shifts resulting from the proton of hydroxy valerate and hydroxybutyrate, confirming the production of poly(3-hydroxybutyrate-co-3-hydroxy valerate) (P3HBV). A 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay showed that the copolymer was biocompatible, even at a high concentration of 5000 µg mL-1. The results of this study show that bacterial strains WK31 and 14SM can be used to synthesize a copolymer of butyrate and valerate using the volatile fatty acids present in the SWW, such as propionic acid or pentanoic acid. P3HBV can also be used to provide an extracellular matrix for cell-line growth without causing any cytotoxic effects.

Gene cloning, expression enhancement in Escherichia coli and biochemical characterization of a highly thermostable amylomaltase from Pyrobaculum calidifontis.

Pcal_0768 gene encoding an amylomaltase, a 4-α-glucanatransferase belonging to family 77 of glycosyl hydrolases, from Pyrobaculum calidifontis was cloned and expressed in Escherichia coli. The recombinant protein was produced in E. coli in soluble and active form. However, the expression level was not very high. Analysis of the mRNA of initial seven codons at the 5'-end of the gene revealed the presence of a hair pin like secondary structure. This secondary structure was removed by site directed mutagenesis, without altering the amino acids, which resulted in enhanced expression of the cloned gene. Recombinant Pcal_0768 exhibited optimal amylomaltase activity at 80 °C and pH 6.9. Under these conditions, the specific activity was 690 U/ mg. Recombinant Pcal_0768 was highly thermostable with a half-life of 6 h at 100 °C. It exhibited the highest kcat value among the characterized glucanotransferases. No metal ions were required for activity or stability of the enzyme. Recombinant Pcal_0768 was successfully employed in the synthesis of modified starch for producing thermoreversible gel. To the best of our knowledge, till now this is the most thermostable enzyme among the characterized amylomaltases. High thermostability and starch modification potential make it a novel and distinct amylomaltase.

Polyhydroxyalkanoate (PHA) production in open mixed cultures using waste activated sludge as biomass.

In this work, volatile fatty acids (VFAs) were used as a carbon source to assess the ability of bacteria present in waste activated sludge (WAS), as indigenous flora, to accumulate polyhydroxyalkanoates (PHA). Acetic acid and propionic acid were used both separately and in combination as feedstock, producing either homopolymer poly(3-hydroxybutyrate) (3PHB) and/or the co-polymer, poly(3-hydroxybutyrate-co-3-hydroxyvalerate) P(3HB-co-3HV). The overall potential to use waste activated sludge as biomass for production of valuable polymers was assessed, and a quality assessment of the as-produced polymers was run, with the extracted polymer being analyzed for properties such as thermal, microstructure and molecular weight. It was found that a blend of copolymers was typically produced, with thermal properties being similar to those reported elsewhere. The overall PHA cell content obtained was 0.29 gPHA gVSS-1.

Polyhydroxyalkanoates (PHA) production in bacterial co-culture using glucose and volatile fatty acids as carbon source.

Mixed bacterial cultures are increasingly being used in the production of polyhydroxyalkanoates (PHAs), as they have the potential to be more cost effective than axenic pure cultures. The purpose of this study was to use pure cultures in combination to identify their potential of PHA production. In this work we used volatile fatty acids (VFAs) and glucose as carbon source to check the ability of selected strains ST2 (Pseudomonas sp.) and CS8 (Bacillus sp.) as co-culture. The production of PHA in pure co-cultures of bacteria was therefore investigated in order to understand the effect of combining cultures on PHA production parameters and material properties. Bacteria could use the feed in better way when mixed as compared to individual strain. In undertaking this analysis, model volatile fatty acids (i.e., acetic and propionic acids) were used alone and in combination with glucose as feedstock. The production by Pseudomonas was 34% while 24% by Bacillus. However when combined and mixed feed (glucose + propionic acid) was used, 35% PHA produced. Overall, it was found that the ability of the pure cultures to produce PHA was low but when selected cultures were mixed, their ability to produce PHA was enhanced. Copolymers were obtained instead of homopolymers with improved properties. This suggests that industrial wastewater rich in volatile fatty acids and carbohydrates can be a good carbon source for PHA production with variable properties.

Variation analysis of bacterial polyhydroxyalkanoates production using saturated and unsaturated hydrocarbons

ABSTRACT Polyhydroxyalkanoates (PHA) are efficient, renewable and environment friendly polymeric esters. These polymers are synthesized by a variety of microbes under stress conditions. This study was carried out to check the suitability of waste frying oil in comparison to other oils for economical bioplastic production. Six bacterial strains were isolated and identified as Bacillus cereus (KF270349), Klebsiella pneumoniae (KF270350), Bacillus subtilis (KF270351), Brevibacterium halotolerance (KF270352), Pseudomonas aeruginosa (KF270353), and Stenotrophomonas rhizoposid (KF270354) by ribotyping. All strains were PHA producers so were selected for PHA synthesis using four different carbon sources, i.e., waste frying oil, canola oil, diesel and glucose. Extraction of PHA was carried out using sodium hypochlorite method and maximum amount was detected after 72 h in all cases. P. aeruginosa led to maximum PHA production after 72 h at 37 °C and 100 rpm using waste frying oil that was 53.2% PHA in comparison with glucose 37.8% and cooking oil 34.4%. B. cereus produced 40% PHA using glucose as carbon source which was high when compared against other strains. A significantly lesser amount of PHA was recorded with diesel as a carbon source for all strains. Sharp Infrared peaks around 1740-1750 cm-1 were present in Fourier Transform Infrared spectra that correspond to exact position for PHA. The use of waste oils and production of poly-3hydroxybutyrate-co-3hydroxyvalerate (3HB-co-3HV) by strains used in this study is a good aspect to consider for future prospects as this type of polymer has better properties as compared to PHBs.

Variation analysis of bacterial polyhydroxyalkanoates production using saturated and unsaturated hydrocarbons.

Polyhydroxyalkanoates (PHA) are efficient, renewable and environment friendly polymeric esters. These polymers are synthesized by a variety of microbes under stress conditions. This study was carried out to check the suitability of waste frying oil in comparison to other oils for economical bioplastic production. Six bacterial strains were isolated and identified as Bacillus cereus (KF270349), Klebsiella pneumoniae (KF270350), Bacillus subtilis (KF270351), Brevibacterium halotolerance (KF270352), Pseudomonas aeruginosa (KF270353), and Stenotrophomonas rhizoposid (KF270354) by ribotyping. All strains were PHA producers so were selected for PHA synthesis using four different carbon sources, i.e., waste frying oil, canola oil, diesel and glucose. Extraction of PHA was carried out using sodium hypochlorite method and maximum amount was detected after 72h in all cases. P. aeruginosa led to maximum PHA production after 72h at 37°C and 100rpm using waste frying oil that was 53.2% PHA in comparison with glucose 37.8% and cooking oil 34.4%. B. cereus produced 40% PHA using glucose as carbon source which was high when compared against other strains. A significantly lesser amount of PHA was recorded with diesel as a carbon source for all strains. Sharp Infrared peaks around 1740-1750cm-1 were present in Fourier Transform Infrared spectra that correspond to exact position for PHA. The use of waste oils and production of poly-3hydroxybutyrate-co-3hydroxyvalerate (3HB-co-3HV) by strains used in this study is a good aspect to consider for future prospects as this type of polymer has better properties as compared to PHBs.