Mixed-ligand copper(ii)-diimine complexes of 3-formylchromone-N 4-phenyl thiosemicarbazone: 5,6-dmp co-ligand confers enhanced cytotoxicity.

The promising biological applications of thiosemicarbazone derivatives have inspired the design, synthesis, and study of their Cu(ii) complexes for anticancer therapeutic applications. Herein, we have evaluated the DNA/protein binding, DNA cleaving, and cytotoxic properties of four mixed-ligand Cu(ii) complexes of the type [Cu(L)(diimine)](NO3) 1-4, where HL is 4-oxo-4H-chromene-3-carbaldehyde-4(N)-phenylthiosemicarbazone and diimine is 2,2'-bipyridine (bpy, 1) 1,10-phenanthroline (phen, 2), 5,6-dimethyl-1,10-phenanthroline (5,6-dmp, 3), or dipyrido-[3,2-f:2',3'-h]-quinoxaline (dpq, 4). Interestingly, complex 3 with higher lipophilicity shows stronger DNA binding and oxidative DNA cleavage, higher ROS production, and more reversible redox behaviour, resulting in its remarkable cytotoxicity (IC50, 1.26 µM) against HeLa cervical cancer cells, and rendering it 5 times more potent than the widely used drug cisplatin. The same complex induces enhanced apoptotic cell death on HeLa cells but lower toxicity towards the non-cancerous PBMC cells. Molecular docking studies suggest that all the complexes bind in the minor groove of DNA and subdomain II of HSA, which is in close agreement with the experimental results. Also, 3 shows cytotoxicity higher than the analogous mixed ligand Cu(ii) complexes, reported already, emphasizing the importance of co-ligand in tuning the anticancer activity.

Powering up targeted protein degradation through active and passive tumour-targeting strategies: Current and future scopes.

Targeted protein degradation (TPD) has emerged as a prominent and vital strategy for therapeutic intervention of cancers and other diseases. One such approach involves the exploration of proteolysis targeting chimeras (PROTACs) for the selective elimination of disease-causing proteins through the innate ubiquitin-proteasome pathway. Due to the unprecedented achievements of various PROTAC molecules in clinical trials, researchers have moved towards other physiological protein degradation approaches for the targeted degradation of abnormal proteins, including lysosome-targeting chimeras (LYTACs), autophagy-targeting chimeras (AUTACs), autophagosome-tethering compounds (ATTECs), molecular glue degraders, and other derivatives for their precise mode of action. Despite numerous advantages, these molecules face challenges in solubility, permeability, bioavailability, and potential off-target or on-target off-tissue effects. Thus, an urgent need arises to direct the action of these degrader molecules specifically against cancer cells, leaving the proteins of non-cancerous cells intact. Recent advancements in TPD have led to innovative delivery methods that ensure the degraders are delivered in a cell- or tissue-specific manner to achieve cell/tissue-selective degradation of target proteins. Such receptor-specific active delivery or nano-based passive delivery of the PROTACs could be achieved by conjugating them with targeting ligands (antibodies, aptamers, peptides, or small molecule ligands) or nano-based carriers. These techniques help to achieve precise delivery of PROTAC payloads to the target sites. Notably, the successful entry of a Degrader Antibody Conjugate (DAC), ORM-5029, into a phase 1 clinical trial underscores the therapeutic potential of these conjugates, including LYTAC-antibody conjugates (LACs) and aptamer-based targeted protein degraders. Further, using bispecific antibody-based degraders (AbTACs) and delivering the PROTAC pre-fused with E3 ligases provides a solution for cell type-specific protein degradation. Here, we highlighted the current advancements and challenges associated with developing new tumour-specific protein degrader approaches and summarized their potential as single agents or combination therapeutics for cancer.

Siderophore-Conjugated Antifungals: A Strategy to Potentially Cure Fungal Infections.

Fungi pose a global threat to humankind due to the increasing emergence of multi-drug-resistant fungi. There is a rising incidence of invasive fungal infections. Due to the structural complexity of fungal cell membranes, only a few classes of antifungal agents are effective and have been approved by the U.S. FDA. Hence, researchers globally are focusing on developing novel strategies to cure fungal infections. One of the potential strategies is the "Trojan horse" approach, which uses the siderophore-mediated iron acquisition (SIA) system to scavenge iron to deliver potent antifungal agents for therapeutics and diagnostics. These siderophore conjugates chelate to iron and are taken up through siderophore-iron transporters, which are overexpressed exclusively on microbes such as bacteria or fungi, but not mammalian cells. Our comprehensive review delves into recent advancements in the design of siderophore-conjugated antifungal agents to gain fungal cell entry. Notably, our focus extends to unraveling the intricate relationship between the structure of natural siderophores or siderophore-like molecules and the resulting antifungal activity. By exploring these design strategies, we aim to contribute to the ongoing discourse on combating drug-resistant fungal infections and advancing the landscape of antifungal theranostics.

Mixed ligand copper(II)-diimine complexes of 2-formylpyridine-N4-phenylthiosemicarbazone: diimine co-ligands tune the in vitro nanomolar cytotoxicity.

Recently, mixed-ligand copper(II) complexes have received much attention in searching for alternative metallodrugs to cisplatin. A series of mixed ligand Cu(II) complexes of the type [Cu(L)(diimine)](ClO4) 1-6, where the HL is 2-formylpyridine-N4-phenylthiosemicarbazone and the diimine is 2,2'-bipyridine (1), 4,4'-dimethyl-2,2'-bipyridine (2), 1,10-phenanthroline (3), 5,6-dimethyl-1,10-phenanathroline (4), 3,4,7,8-tetramethyl-1,10-phenanthroline (5) and dipyrido-[3,2-f:2',3'-h]quinoxaline (6), has been synthesized and their cytotoxicity in HeLa cervical cancer cells examined. In the molecular structures of 2 and 4, as determined by single-crystal X-ray studies, Cu(II) assumes a trigonal bipyramidal distorted square-based pyramidal (TBDSBP) coordination geometry. DFT studies reveal that the axial Cu-N4diimine bond length, interestingly, varies linearly with the experimental CuII/CuI reduction potential as well as the trigonality index τ of the five-coordinate complexes, and that methyl substitution on diimine co-ligands tunes the extent of the Jahn-Teller distortion at the Cu(II). While 4 is involved in strong DNA groove binding with a hydrophobic interaction of methyl substituents, 6 is involved in stronger binding through partial intercalation of dpq with DNA. Complexes 3, 4, 5, and 6 efficiently cleave supercoiled DNA into NC form in ascorbic acid by generating hydroxyl radicals. Interestingly, 4 exhibits higher DNA cleavage in hypoxic than at normoxic conditions. Notably, except for [CuL]+, all the complexes were stable in 0.5% DMSO-RPMI (without phenol red) cell culture medium up to 48 h at 37 °C. Remarkably, all the complexes show time-dependent cytotoxicity at nanomolar concentrations (IC50, 7.0-182 nM) in HeLa cervical cancer cells compared with uncoordinated ligand HL (IC50 > 10 000 nM). Except for 2 and 3, all the complexes exhibit higher cytotoxicity than [CuL]+ at 48 h. 4 shows (57.2 nM) higher cytotoxicity than 1 (181.5 nM) at 24 h incubation; however, notably, 1 demonstrates phenomenal cytotoxicity (7.0 nM) higher than 4 (13.6 nM) at 48 h incubation. The selectivity index (SI) reveals that complexes 1 and 4 are 53.5 and 37.3, respectively, times less toxic to HEK293 normal cells than to cancerous cells. Except for [CuL]+, all the complexes generate ROS to different extents at 24 h, with 1 producing the highest amount, which is consistent with their redox properties. Also, 1 and 4 exhibit, respectively, sub-G1 and G2-M phase cell arrest in the cell cycle. Therefore, complexes 1 and 4 have the potential to emerge as promising anticancer agents.

Pooled evidence from preclinical and clinical studies for stem cell-based therapy in ARDS and COVID-19.

COVID-19 has severely devastated many lives across the globe. It has been speculated that stem cell-based therapy for COVID-19 treatment could be able to subsidize the effects. In preclinical and clinical studies, stem cell-based therapy has successfully eliminated inflammatory cytokines in ALI, ARDS, and COVID-19. Clinical trials have produced a variety of promising results for validating stem cell therapy in COVID-19 patients. For instance, exosome-based therapy (ExoFlow) showed an 87% survival status, and MSC-based therapy (Mesoblast) achieved an 83% survival rate in moderate to severe COVID-19 patients. This review debates the advantages of cell-free therapy, i.e., stem cell-derived exosome-based therapies, over stem cell-based therapy. This review aims to question whether the immunomodulatory effect of stem cells differs based on their origin and also tries to find possible answers for the best stem cells for treating SARS-CoV-2 infection. The role of stem cells and their extracellular vesicles in the upregulation of regulatory immune cells, growth factors (EGF, FGF, VEGF), and anti-inflammatory cytokines (IL-6, INF-α, galectin-1, notch-1, PDL-1) that promote the tissue regeneration at the injured site. The right side of the image depicts the downregulation of inflammation-inducing immune cells, pro-inflammatory cytokines, and chemokines that could also enhance COVID-19 therapy.

A perspective to weaponize microRNAs against lung cancer.

microRNAs are regulatory RNAs that silence specific mRNA by binding to it, inducing translational repression. Over the recent decades since the discovery of RNA interference, the field of microRNA therapeutics has expanded tremendously. The role of miRNAs in disease development has attracted researchers to investigate their potential in therapeutics. In lung cancer, multiple miRNAs are deregulated, and their involvement is observed in cell proliferation, immunomodulation, angiogenesis, and epithelial-mesenchymal transition. Thus, synthetic oligonucleotides are developed to downregulate the overexpressed miRNA or to upregulate the repressed miRNA. However, their clinical efficiency is limited due to the requirement for an effective delivery strategy. Advances in the current understanding of nanotechnology, biomaterial science, and disease molecular pathology have increased the chances of overcoming the limitations of miRNA-based therapy. This review enlists downregulated and upregulated miRNAs in lung cancer. This review also highlights the major contributions to miRNA-based therapeutics for lung cancer and strategies to overcome endosomal barriers. It also attempts to understand the nuances between current advancements in delivery methods, advantages, disadvantages, and practical issues for the large-scale development of miRNA-based therapeutics.

A Perspective on Newly Emerging Proteolysis-Targeting Strategies in Antimicrobial Drug Discovery.

Targeted protein degradation is a new aspect in the field of drug discovery. Traditionally, developing an antibiotic includes tedious and expensive processes, such as drug screening, lead optimization, and formulation. Proteolysis-targeting chimeras (PROTACs) are new-generation drugs that use the proteolytic mechanism to selectively degrade and eliminate proteins involved in human diseases. The application of PROTACs is explored immensely in the field of cancer, and various PROTACs are in clinical trials. Thus, researchers have a profound interest in pursuing PROTAC technology as a new weapon to fight pathogenic viruses and bacteria. This review highlights the importance of antimicrobial PROTACs and other similar "PROTAC-like" techniques to degrade pathogenic target proteins (i.e., viral/bacterial proteins). These techniques can perform specific protein degradation of the pathogenic protein to avoid resistance caused by mutations or abnormal expression of the pathogenic protein. PROTAC-based antimicrobial therapeutics have the advantage of high specificity and the ability to degrade "undruggable" proteins, such as nonenzymatic and structural proteins.

Nanoparticle Enhancement of Natural Killer (NK) Cell-Based Immunotherapy.

Natural killer (NK) cells are one of the first lines of defense against infections and malignancies. NK cell-based immunotherapies are emerging as an alternative to T cell-based immunotherapies. Preclinical and clinical studies of NK cell-based immunotherapies have given promising results in the past few decades for hematologic malignancies. Despite these achievements, NK cell-based immunotherapies have limitations, such as limited performance/low therapeutic efficiency in solid tumors, the short lifespan of NK cells, limited specificity of adoptive transfer and genetic modification, NK cell rejection by the patient's immune system, insignificant infiltration of NK cells into the tumor microenvironment (TME), and the expensive nature of the treatment. Nanotechnology could potentially assist with the activation, proliferation, near-real time imaging, and enhancement of NK cell cytotoxic activity by guiding their function, analyzing their performance in near-real time, and improving immunotherapeutic efficiency. This paper reviews the role of NK cells, their mechanism of action in killing tumor cells, and the receptors which could serve as potential targets for signaling. Specifically, we have reviewed five different areas of nanotechnology that could enhance immunotherapy efficiency: nanoparticle-assisted immunomodulation to enhance NK cell activity, nanoparticles enhancing homing of NK cells, nanoparticle delivery of RNAi to enhance NK cell activity, genetic modulation of NK cells based on nanoparticles, and nanoparticle activation of NKG2D, which is the master regulator of all NK cell responses.

Can 3D-Printed Bioactive Glasses Be the Future of Bone Tissue Engineering?

According to the Global Burden of Diseases, Injuries, and Risk Factors Study, cases of bone fracture or injury have increased to 33.4% in the past two decades. Bone-related injuries affect both physical and mental health and increase the morbidity rate. Biopolymers, metals, ceramics, and various biomaterials have been used to synthesize bone implants. Among these, bioactive glasses are one of the most biomimetic materials for human bones. They provide good mechanical properties, biocompatibility, and osteointegrative properties. Owing to these properties, various composites of bioactive glasses have been FDA-approved for diverse bone-related and other applications. However, bone defects and bone injuries require customized designs and replacements. Thus, the three-dimensional (3D) printing of bioactive glass composites has the potential to provide customized bone implants. This review highlights the bottlenecks in 3D printing bioactive glass and provides an overview of different types of 3D printing methods for bioactive glass. Furthermore, this review discusses synthetic and natural bioactive glass composites. This review aims to provide information on bioactive glass biomaterials and their potential in bone tissue engineering.