RESUMEN
Specifications that correspond with system performance may guarantee the addition of value. Most specifications for ready-mixed concrete address limits on discharge time and truck-drum revolution counts. These limits have been developed for conventional concrete. As the uses of supplementary cementing materials (SCMs) become ubiquitous, it is important to determine whether these specifications are applicable to SCMs, that is, systems containing fly ash. This paper presents results of the effects of mixing time and mixer revolution counts on characteristics of lab-made pastes and mortars containing 20% and 50% fly ash. Their characteristics assessed include time-variant ion concentrations, setting time, flow, compressive strength, porosity, and apparent chloride diffusivity coefficient. Results indicate that with increasing mixing time and mixer revolution counts, mixtures with a replacement of fly ash exhibit improved both fresh and hardened characteristics. When mixed for 60 min or 25,505 revolution count, the 28-day compressive strengths of mixtures containing 20% and 50% fly ash are 50% to 100% higher than the neat cement. Fly ash is suggested to adopt in the extended mixing processes of cement systems.
RESUMEN
Due to the high-efficiency energy absorption and high-tension strength material properties of spider silk, many researchers have studied the mechanical properties and microstructure of the spider web. The concept of spider web structure has been recognized to be adopted for structural engineering aspect. The structure of spider web and its material properties have been studied for decades. However, the fundamental free vibration mode shapes and their corresponding frequencies have never been fully investigated. This study investigates the nonlinear characteristics in the large-amplitude free vibration of imperfect spider web structures using finite element analysis. The spider web applies the concept of elastic cables taking only axial deformation into account. The finite element models of a spider web considering geometric nonlinearities are employed. It should be noted that spider web could experience large deformation when the spider uses its silk to catch prey. This research aims at analyzing the linear and geometric nonlinear behaviour of imperfect spider web structure. Four different types of imperfect spider web: spiral imperfect spider web, radial imperfect spider web, central imperfect spider web, and circular rings imperfect spider web, are considered. It is found that pretension in spider silk plays a significant role in nonlinear vibration characteristics of the spider web. Moreover, the radial thread damaged tends to have a greater effect on structural free vibration of spider web in comparison with other imperfections. The outcome will help a structural engineer to adapt the concept of spider web, its properties, and damage patterns for any larger structures.
Asunto(s)
Seda/química , Arañas , Vibración , Animales , Fenómenos Biomecánicos , Análisis de Elementos FinitosRESUMEN
At present, railway infrastructure experiences harsh environments and aggressive loading conditions from increased traffic and load demands. Ground borne vibration has become one of these environmental challenges. Overhead line equipment (OHLE) provides electric power to the train and is, for one or two tracks, normally supported by cantilever masts. A cantilever mast, which is made of H-section steel, is slender and has a poor dynamic behaviour by nature. It can be seen from the literature that ground borne vibrations cause annoyance to people in surrounding areas especially in buildings. Nonetheless, mast structures, which are located nearest and alongside the railway track, have not been fully studied in terms of their dynamic behaviour. This paper presents the effects of ground borne vibrations generated by high speed trains on cantilever masts and contact wire located alongside railway tracks. Ground borne vibration velocities at various train speeds, from 100â¯km/h to 300â¯km/h, are considered based on the consideration of semi-empirical models for predicting low frequency vibration on ground. A three-dimensional mast structure with varying soil stiffness is made using a finite element model. The displacement measured is located at the end of cantilever mast which is the position of contact wire. The construction tolerance of contact stagger is used as an allowable movement of contact wire in transverse direction. The results show that the effect of vibration velocity from train on the transverse direction of mast structure is greater than that on the longitudinal direction. Moreover, the results obtained indicate that the ground bourn vibrations caused by high speed train are not strong enough to cause damage to the contact wire. The outcome of this study will help engineers improve the design standard of cantilever mast considering the effect of ground borne vibration as preliminary parameter for construction tolerances.