RESUMEN
Split inactivated influenza vaccines remain one of the primary preventative strategies against severe influenza disease in the population. However, current vaccines are only effective against a limited number of matched strains. The need for broadly protective vaccines is acute due to the high mutational rate of influenza viruses and multiple strain variants in circulation at any one time. The neuraminidase (NA) glycoprotein expressed on the influenza virion surface has recently regained recognition as a valuable vaccine candidate. We sought to broaden the protection provided by NA within the N1 subtype by computationally engineering consensus NA sequences. Three NA antigens (NA5200, NA7900, NA9100) were designed based on sequence clusters encompassing three major groupings of NA sequence space; (i) H1N1 2009 pandemic and Swine H1N1, (ii) historical seasonal H1N1 and (iii) H1N1 viruses ranging from 1933 till current times. Recombinant NA proteins were produced as a vaccine and used in a mouse challenge model. The design of the protein dictated the protection provided against the challenge strains. NA5200 protected against H1N1 pdm09, a Swine isolate from 1998 and NIBRG-14 (H5N1). NA7900 protected against all seasonal H1N1 viruses tested, and NA9100 showed the broadest range of protection covering all N1 viruses tested. By passive transfer studies and serological assays, the protection provided by the cluster-based consensus (CBC) designs correlated to antibodies capable of mediating NA inhibition. Importantly, sera raised to the consensus NAs displayed a broader pattern of reactivity and protection than naturally occurring NAs, potentially supporting a predictive approach to antigen design.
RESUMEN
A disulphide bond was introduced into a single-chain Fv form of the anticarbohydrate antibody, Se155-4 by replacing Ala-L57 of the light chain and Asp-H106 of the heavy chain with cysteines, by site-directed mutagenesis. To maintain the salt-bridge from the latter residue to Arg-H98, Tyr-107 was also altered to Asp. The resulting ds-scFv was shown to retain full antigen-binding activity, by enzyme immunoassay and surface plasmon resonance analysis of binding kinetics. Compared with the parent scFv, the disulphide bonded form was shown to have enhanced thermal stability, by Fourier transform IR spectroscopy. The Tm was raised from 60 degrees C to 69 degrees C. The ds-scFv form thus combines the stable monomeric form of the disulphide form with the expression advantages of the scFv.
Asunto(s)
Disulfuros , Calefacción , Fragmentos de Inmunoglobulinas/química , Región Variable de Inmunoglobulina/química , Sitios de Unión , Fragmentos de Inmunoglobulinas/biosíntesis , Fragmentos de Inmunoglobulinas/genética , Fragmentos de Inmunoglobulinas/inmunología , Región Variable de Inmunoglobulina/biosíntesis , Región Variable de Inmunoglobulina/genética , Mutagénesis , Conformación Proteica , Salmonella/inmunologíaRESUMEN
The atomic structure of an antibody antigen-binding fragment (Fab) at 2.45 A resolution shows that polysaccharide antigen conformation and Fab structure dictated by combinatorial diversity and domain association are responsible for the fine specificity of the Brucella-specific antibody, YsT9.1. It discriminates the Brucella abortus A antigen from the nearly identical Brucella melitensis M antigen by forming a groove-type binding site, lined with tyrosine residues, that accommodates the rodlike A antigen but excludes the kinked structure of the M antigen, as envisioned by a model of the antigen built into the combining site. The variable-heavy (VH) and variable-light (VL) domains are derived from genes closely related to two used in previously solved structures, M603 and R19.9, respectively. These genes combine in YsT9.1 to form an antibody of totally different specificity. Comparison of this X-ray structure with a previously built model of the YsT9.1 combining site based on these homologies highlights the importance of VL:VH association as a determinant of specificity and suggests that small changes at the VL:VH interface, unanticipated in modeling, may cause significant modulation of binding-site properties.
Asunto(s)
Antígenos Bacterianos/inmunología , Brucella/inmunología , Pared Celular/inmunología , Fragmentos Fab de Inmunoglobulinas/química , Polisacáridos Bacterianos/inmunología , Especificidad de Anticuerpos , Brucella abortus/inmunología , Brucella melitensis/inmunología , Secuencia de Carbohidratos , Simulación por Computador , Fragmentos Fab de Inmunoglobulinas/genética , Fragmentos Fab de Inmunoglobulinas/inmunología , Manosa/análogos & derivados , Manosa/inmunología , Modelos Moleculares , Datos de Secuencia Molecular , Difracción de Rayos XRESUMEN
Specific functional group modification of an antibody adsorbed to microtitre plates has been used to probe the binding site residues that determine antigen specificity. Chemical modification of adsorbed protein in tandem with enzyme immunoassay (termed CMAP-EIA) consumes only modest amounts of antibody, while allowing a variety of reagents to be rapidly screened in situ. Modification of tyrosine and arginine residues with 1-fluoro-2,4-dinitrobenzene, and p-hydroxyphenylglyoxal resulted in reduced binding of polysaccharide antigen from Yersinia enterocolitica O-polysaccharide to its homologous monoclonal antibody, YsT9-1. Modification with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide under various conditions indicated that carboxylate groups may also be involved. Parallel experiments with diethylpyrocarbonate and acetic anhydride were used to rule out the involvement of histidine and lysine residues respectively. In all cases, binding of an anti-idiotypic antibody, AJ5, could only be reduced at concentrations of modifying reagent substantially higher than those required to reduce polysaccharide antigen binding to YsT9-1. The results are discussed with regard to the structure of the combining site of YsT9-1 as determined by X ray crystallography and by modelling, and the role of particular residues in complex formation with antigen and in the idiotope.
Asunto(s)
Anticuerpos Antibacterianos/inmunología , Sitios de Unión de Anticuerpos/inmunología , Polisacáridos Bacterianos/inmunología , Yersinia enterocolitica/inmunología , Anhídridos Acéticos , Reacciones Antígeno-Anticuerpo/efectos de los fármacos , Sitios de Unión de Anticuerpos/efectos de los fármacos , Carbodiimidas , Dietil Pirocarbonato , Dinitrofluorobenceno , Relación Dosis-Respuesta Inmunológica , Concentración de Iones de Hidrógeno , Técnicas para Inmunoenzimas , Modelos Moleculares , Antígenos O , Fenilglioxal/análogos & derivados , Difracción de Rayos XRESUMEN
Twelve plant lectins from the Papilionoideae subfamily were selected to represent a range of carbohydrate specificities, and their sequences were aligned. Two variability indices were applied to the aligned sequences and the results were analysed using the three-dimensional structures of concanavalin A and the pea lectin. The areas of greatest variability were located in the carbohydrate-binding site region, forming a perimeter around a well-conserved core. These residues are inferred to be specificity determining, in the manner of antibodies, and the most variable position corresponded to Tyr100 in concanavalin A, a known ligand contact residue. In addition to the five peptide loops known to form the binding site from crystallographic studies, a sixth segment with variable residues was located in the binding-site region, and this may contribute to oligosaccharide specificity. In their overall composition, the lectin sites resemble those of the sugar-transport proteins rather than antibodies. The prospects for modelling lectin binding sites by the methods used for antibodies were also assessed.
Asunto(s)
Fabaceae/química , Lectinas/química , Plantas Medicinales , Secuencia de Aminoácidos , Sitios de Unión , Metabolismo de los Hidratos de Carbono , Concanavalina A/química , Concanavalina A/genética , Concanavalina A/metabolismo , Variación Genética , Lectinas/genética , Lectinas/metabolismo , Modelos Moleculares , Datos de Secuencia Molecular , Lectinas de Plantas , Alineación de Secuencia , Análisis de Secuencia , Homología de Secuencia de Aminoácido , Relación Estructura-ActividadRESUMEN
Competitive labeling of melittin over a range of concentrations in the presence and absence of liposomes provides a series of "snapshots" of the chemical reactivities of melittin's intrinsic nucleophiles. Distinct trends in apparent reactivities were observed for the Gly-1 alpha-amino group and the epsilon-amino groups of Lys-7 and Lys-21 and -23, over a range of concentrations, providing evidence for different forms of associated melittin in solution. The monomer-tetramer transition can be followed, in accord with structural details derived from X-ray crystallography. The reactivity behavior of the alpha-amino group of Gly-1 and the epsilon-amino groups of Lys-21 and Lys-23 suggests these groups undergo similar perturbations in their microenvironments during the monomer-tetramer transition in free solution. Similar changes in reactivity behavior occur upon association of melittin monomers with bilayer-forming lipids. Together, these findings suggest that the local environments of the N- and C-terminal segments have similar physicochemical properties in both the solution tetramer and the lipid-associated complex. The concentration dependence of the chemical properties of melittin is correlated with surface accessibility calculations which are used to provide a framework for interpretation. Aspects of several previously proposed models of membrane lysis can be accounted for by concentration-dependent properties of melittin.
Asunto(s)
Membrana Dobles de Lípidos/metabolismo , Meliteno/química , Secuencia de Aminoácidos , Unión Competitiva , Fenómenos Químicos , Química , Dinitrofluorobenceno/metabolismo , Liposomas/metabolismo , Lisina/química , Sustancias Macromoleculares , Meliteno/metabolismo , Datos de Secuencia Molecular , Estructura Molecular , Mapeo Peptídico , SolucionesRESUMEN
A molecular model of the binding site of an anti-carbohydrate antibody (YsT9.1) has been developed using computer-assisted modeling techniques and molecular dynamics calculations. Sequence homologies among YsT9.1 and the Fv regions of McPC603, J539 and human Bence--Jones protein REI, all of which have solved crystal structures, provided the basis for the modeling. The groove-type combining site model had a topography which was complementary to low energy conformers of the polysaccharide, a Brucella O-antigen, and the site could be almost completely filled by a pentasaccharide epitope in either of two docking modes. Putative interactions between this epitope and the antibody are consistent with the known structural requirements for binding and lead to the design of oligosaccharide inhibitors that probe the veracity of the modeled docked complex. Ultimately both the Fv model and the docked complex will be compared with independent crystal structures of YsT9.1 Fab with and without pentasaccharide inhibitor, currently at the stage of refinement.
Asunto(s)
Anticuerpos Monoclonales/metabolismo , Complejo Antígeno-Anticuerpo , Antígenos Bacterianos/metabolismo , Brucella abortus/inmunología , Lipopolisacáridos/metabolismo , Secuencia de Aminoácidos , Reacciones Antígeno-Anticuerpo , Sitios de Unión de Anticuerpos , Epítopos Inmunodominantes/inmunología , Lipopolisacáridos/inmunología , Modelos Moleculares , Datos de Secuencia Molecular , Antígenos O , Unión Proteica , Conformación ProteicaRESUMEN
At physiological pH and temperature, glucagon binds to liposomes composed of egg phosphatidylcholine and cholesterol (2:1 mol/mol) in a highly specific manner. The chemical reactivities of the functional groups were determined over the concentration range of 1.0 X 10(-6)-3.0 X 10(-8) M by the method of competitive labelling with 1-fluoro-2,4-dinitrobenzene as the labelling reagent. At concentrations above 3 X 10(-7) M, the amino terminal histidine and the two tyrosine residues showed a marked decrease in reactivity in the presence of liposomes, but the reactivity of the Lys-12 N epsilon-amino group was unaltered. At lower concentrations the Lys-12 reactivity also decreased markedly, owing to a change in the environment of this group. These results indicated that two different forms of glucagon existed over the concentration range studied. Both in the absence and presence of liposomes the Lys-12 N epsilon-amino groups showed a transition in reactivity at 1.8 X 10(-7) M. In the presence of liposomes the other functional groups also showed a transition in reactivity at 2 X 10(-7) M but the change was much smaller. The pattern of reactivities were consistent with the X-ray crystallographic structure of the type 2 glucagon trimer being the predominant species at 10(-6) M, with free monomeric glucagon occurring at 3 X 10(-8) M. A trimerization constant of 4 X 10(13) M-2 at pH 7.5 and 37 degrees C was determined.(ABSTRACT TRUNCATED AT 250 WORDS)
Asunto(s)
Glucagón/metabolismo , Membrana Dobles de Lípidos/metabolismo , Dipéptidos/metabolismo , Liposomas/metabolismo , Modelos Moleculares , Oligopéptidos/metabolismo , Unión Proteica , Conformación ProteicaRESUMEN
The free monomeric form of insulin is known to adsorb strongly to many different surfaces. A question of physiological relevance for which no previous studies have been reported is whether the monomeric form of insulin binds to lipid bilayers. In order to answer this question, it is necessary to carry out studies at the very dilute concentrations (less than 10(-6) M) necessary to obtain this species. We have approached this problem by applying the method of competitive labeling [Hefford, M.A., Evans, R.M., Oda, G., & Kaplan, H. (1985) Biochemistry 24, 867-874] to study insulin at concentrations as low as 3 X 10(-8) M, in the presence and absence of large unilamellar liposomes. With 1-fluoro-2,4-dinitrobenzene as the labeling reagent, the relative chemical reactivities of the functional groups of insulin were found to decrease markedly when insulin was incubated with liposomes consisting of egg lecithin and cholesterol (2:1 mol/mol) in 1.0 M KCl, pH 7.5 at 37 degrees C. The decrease for each functional group was found to directly correlate with its proximity to the dimer-forming surface of the monomer. It is concluded that insulin binds to lipid bilayers in a specific orientation, with the dimer-forming surface interacting with the bilayer. These results demonstrate the feasibility of applying competitive labeling to obtain structure-function relationships of membrane-interactive proteins in general and monomeric insulin in particular.