Controlled Delivery and Photopatterning of Mechanical Properties in Polysaccharide Hydrogels Using Vanadium Coordination and Photochemistry.

Incorporation of the transition metal ion V(V) into hydrogels has been used to impart photoresponsive behavior, which was used to tune materials properties during light irradiation. The photoreaction in QHE-cellulose/agarose hydrogels coordinated with vanadium was evidenced by a clear color change of yellow to blue through a green intermediate. This color change was attributed to the reduction of V(V) to V(IV) as described in our previous work. A concomitant oxidative breakdown of the polysaccharide chain was noticeable upon the reduction of V(V) with a decrease in stiffness (G') of the hydrogel material. This reduction of the metal ion and breakdown of polysaccharide chain induced irreversible changes in the microstructure of the hydrogel, enabling the controlled delivery of V(IV) and/or encapsulated cargo. Scanning electron microscopy studies showed an increase in pore sizes and guest cavity formation during irradiation. In addition to the significant drop in mechanical properties like storage and loss modulus in the gel materials, a viscosity drop in the polymer solution was observed through irradiation, indicating breakdown of the polysaccharide chain. A photomask can be used to create discrete patterns on these materials upon irradiation.

Real-Time and In Situ Viscosity Monitoring in Industrial Adhesives Using Luminescent Cu(I) Phenanthroline Molecular Sensors.

Monitoring the viscosity of polymers in real-time remains a challenge, especially in confined environments where traditional rheological measurements are hard to apply. In this study, we have utilized the luminescent complex [Cu(diptmp)2]+ (diptmp = 2,9-diisopropyl-3,4,7,8-tetramethyl-1,10-phenanthroline) as an optical probe for real-time sensing of viscosity in various adhesives during the curing process (viscosity increases). The emission lifetime of the triplet metal-to-ligand charge transfer (3MLCT) state of [Cu(diptmp)2]+ in epoxy adhesive increased exponentially during curing, similar to viscosity values obtained from oscillatory rheology. The longer lifetime in higher viscosity materials was attributed to changes in the excited-state deactivation processes from a known Jahn-Teller distortion in the Cu(I) geometry from tetrahedral in the ground state to square planar in the excited state. The real-time viscosity was also monitored reversibly by emission lifetime during polymer swelling (viscosity and lifetime decrease) and unswelling (viscosity and lifetime increase). Monitoring emission lifetime, unlike measuring the excited-state lifetime via transient absorption measurements in our previous study, allowed us to measure viscosity in opaque samples which scatter light. The optical probe [Cu(diptmp)2]+ in Gorilla Glue adhesive showed a clear correlation of the emission intensity or lifetime to viscosity during the curing process. We have also compared these lifetime changes using [Ru(bpy)3]2+ (bpy = bipyridine) as a control. [Cu(diptmp)2]+ showed not only a higher emission lifetime but also more ubiquity as a real-time viscosity sensor.

Synthesis and crystal structure of catena-poly[[tetra-µ-acetato-copper(II)]-µ-6-eth-oxy-N 2,N 4-bis-[2-(pyridin-2-yl)eth-yl]-1,3,5-triazine-2,4-di-amine].

The title compound, [Cu2(C19H23N7O)(C2H3O2)4] n , was obtained via reaction of copper(II) acetate with the coordinating ligand, 6-eth-oxy-N 2,N 4-bis-[2-(pyridin-2-yl)eth-yl]-1,3,5-triazine-2,4-di-amine. The crystallized product adopts the monoclinic P21/c space group. The metal core exhibits a paddle-wheel structure typical for dicopper tetra-acetate units, with triazine and pyridyl nitro-gen atoms from different ligands coordinating to the two axial positions of the paddle wheel in an asymmetric manner. This forms a coordination polymer with the segments of the polymer created by the c-glide of the P21/c setting of the space group. The resulting chains running along the c-axis direction are held together by intra-molecular N-H⋯O hydrogen bonding. These chains are further packed by dispersion forces, producing an extended three-dimensional structure.

Photoactive siderophores: Structure, function and biology.

It is well known that bacteria and fungi have evolved sophisticated systems for acquiring the abundant but biologically inaccessible trace element iron. These systems are based on high affinity Fe(III)-specific binding compounds called siderophores which function to acquire, transport, and process this essential metal ion. Many hundreds of siderophores are now known and their numbers continue to grow. Extensive studies of their isolation, structure, transport, and molecular genetics have been undertaken in the last three decades and have been comprehensively reviewed many times. In this review we focus on a unique subset of siderophores that has only been recognized in the last 20 years, namely those whose iron complexes display photoactivity. This photoactivity, which typically results in the photooxidation of the siderophore ligand with concomitant reduction of Fe(III) to Fe(II), seemingly upsets the siderophore paradigm of forming and transporting only extremely stable Fe(III) complexes into microbial cells. Here we review their structure, synthesis, photochemistry, photoproduct coordination chemistry and explore the potential biological and ecological consequences of this photoactivity.

Fe(III)-polyuronic acid photochemistry: radical chemistry in natural polysaccharide.

The photochemistry of Fe(III) coordinated to natural uronate-containing polysaccharides has been investigated quantitatively in aqueous solution. It is demonstrated that the photoreduction of the coordinated Fe(III) to Fe(II) and oxidative decarboxylation occurs in a variety of uronate-containing polysaccharides. The photochemistry of the Fe(III)-polyuronic acid system generated a radical species during the reaction which was studied using the spin trapping technique. The identity of the radical species from this reaction was confirmed as CO2•- indicating that both bond cleavage of the carboxylate and oxidative decarboxylation after ligand to metal charge transfer radical reactions may be taking place upon irradiation. Degradation of the polyuronic acid chain was investigated with dynamic light scattering, showing a decrease in the hydrodynamic radius of the polymer assemblies in solution after light irradiation that correlates with the Fe(II) generation. A decrease in viscosity of Fe(IIII)-alginate after light irradiation was also observed. Additionally, the photochemical reaction was investigated in plant root tissue (parsnip) demonstrating that Fe(III) coordination in these natural materials leads to photoreactivity that degrades the pectin component. These results highlight that this Fe(III)-polyuronic acid can occur in many natural systems and may play a role in biogeochemical cycling of iron and ferrous iron generation in plants with significant polyuronic acid content.

Harnessing Fe(III)-Carboxylate Photochemistry for Radical-Initiated Polymerization in Hydrogels.

Coordination of Fe(III) to carboxylates in polyuronic acid hydrogels was used to impart photochemical reactivity to polysaccharide-based hydrogels. This photochemical reaction was then used for light-initiated polymerization to create hydrogels with advanced mechanical and conductive properties by capturing the photogenerated radical with a monomer, either acrylamide, methyl methacrylate, or aniline. The photopolymerization of acrylamide using the Fe(III)-polyuronic acid was quantified in solution and the polymerization efficiency was determined under different conditions. Poly(methyl methacrylate) (PMMA)-modified hydrogels were analyzed by the contact angle, optical microscopy, and rheology. This confirmed formation of a stiff, hydrophobic, PMMA layer on polysaccharide hydrogels after light irradiation in methyl methacrylate. Polyaniline-modified hydrogels were characterized by current-voltage sweeps, which showed the formation of conductive polyaniline integrated into the hydrogel after light irradiation in the aniline monomer. This strategy provided a facile approach to create either layered hydrogels with different stiffness and hydrophobicity or hybrid conductive hydrogels using the simple photochemical reaction of blue light irradiation of Fe(III) coordinated to polyuronic acids.

Nutrient Capture from Aqueous Waste and Photocontrolled Fertilizer Delivery to Tomato Plants Using Fe(III)-Polysaccharide Hydrogels.

Inexpensive and sustainable methods are needed to reclaim nutrients from agricultural waste solutions for use as a fertilizer while decreasing nutrient runoff. Fe(III)-polysaccharide hydrogels are able to flocculate solids and absorb nutrients in liquid animal waste from Confined Animal Feeding Operations (CAFOs). Fe(III)-alginate beads absorbed 0.05 mg g-1 NH4 + and NO3 - from 100 ppm solutions at pH = 7, with > 80% phosphate uptake and ∼30% uptake of ammonium and nitrate. Ammonium uptake from a raw manure solution (1420 ppm NH4 +) showed a significant 0.7 mg g-1 uptake. Tomato plant trials carried out with Fe(III)-alginate hydrogel beads in greenhouse conditions showed controlled nutrient delivery for the plants compared to fertilizer solution with the same nutrient content. Plants showed an uptake of Fe from the gel beads, and Fe(III)-alginate hydrogel beads promoted root growth of the plants. The plants treated with nutrient-loaded Fe(III)-alginate hydrogels yielded comparable tomato harvest to plants treated with the conventional fertilizer solution.

Reclaiming Phosphate from Waste Solutions with Fe(III)-Polysaccharide Hydrogel Beads for Photo-Controlled-Release Fertilizer.

Photoresponsive hydrogels from polysaccharides and Fe(III) were used as a new system to capture and release PO43- from waste solutions. Uptake of 0.6-1.5 mg of phosphate per gram of hydrogels was determined from 800 ppm phosphate solutions (pH 4.8-9.0). These beads also captured 1.2 mg g-1 of phosphate from animal waste (raw manure, 727 ppm phosphate, pH 7.6), which accounted for above 80% phosphate uptake. Irradiation of phosphate-loaded hydrogels degraded the gels due to the photochemistry of the Fe(III)-carboxylates, giving controlled phosphate release (∼81% after 7 days). No release (<2% after 7 days) was seen in the dark. Kale plant trials showed complete degradation of the hydrogels in ∼2 weeks under greenhouse conditions. Biomass analysis of kale treated with phosphate-loaded beads compared to controls indicated no signs of toxicity. These results show that Fe(III)-polysaccharide hydrogels were able to reclaim phosphates from waste solutions and can be used as a controlled-release fertilizer.

Generating Photonastic Work from Irradiated Dyes in Electrospun Nanofibrous Polymer Mats.

For solar-driven macroscopic motions, we assert that there is a local heating that facilitates large-scale deformations in anisotropic morphologic materials caused by thermal gradients. This report specifically identifies the fate of heat generation in photonastic materials and demonstrates how heat can perform work following excitation of a nonisomerizing dye. Utilizing the electrospinning technique, we have created a series of anisotropic nanofibrous polymer mats that comprise nonisomerizing dyes. Polymers are chosen because of their relative glass transition temperatures, elastic moduli, and melting temperatures. Light irradiation of these polymer mats with an excitation wavelength matching the absorption characteristics of the dye leads to macroscopic deformation of the mat. Analysis of still images extracted from digital videos provides plots of angular displacement vs power. The data were analyzed in terms of a photothermal model. Analyses of scanning electron microscopy micrographs for all samples are consistent to local melting in low Tg polymers and softening in high Tg polymers. Dynamic mechanical analysis allowed for quantification of the modulus change under a given light fluence. We employ these data to calculate a energy conversion efficiency. These efficiencies for the polymer mats are compared to other nonmuscular systems, including a few natural, biological samples.

Mössbauer Spectroscopic Characterization of Iron(III)-Polysaccharide Coordination Complexes: Photochemistry, Biological, and Photoresponsive Materials Implications.

While polycarboxylates and hydroxyl-acid complexes have long been known to be photoactive, simple carboxylate complexes which lack a significant LMCT band are not typically strongly photoactive. Hence, it was somewhat surprising that a series of reports demonstrated that materials synthesized from iron(III) and polysaccharides such as alginate (poly[guluronan-co-mannuronan]) or pectate (poly[galacturonan]) formed photoresponsive materials that convert from hydrogels to sols under the influence of visible light. These materials have numerous potential applications in areas such as photopatternable materials, materials for controlled drug delivery, and tissue engineering. Despite the near-identity of the functional units in the polysaccharide ligands, the reactivity of iron(III) hydrogels can depend on the configuration of some chiral centers in the sugar units and in the case of alginate the guluronate to mannuronate block composition, as well as pH. Here, using temperature- and field-dependent transmission Mössbauer spectroscopy, we show that the dominant iron compound detected for both the alginate and pectate gels displays features typical of a polymeric (Fe3+O6) system. The Mössbauer spectra of such systems are strongly dependent on temperature, field, size, and crystallinity, indicative of superparamagnetic relaxation of magnetically ordered nanoparticles. Pectate and alginate hydrogels differ in the size distribution of the iron oxyhydroxy nanoparticles, suggesting that in general smaller nanoparticles are more reactive. Potential biological implications of these results are also discussed.

Restricted Photoinduced Conformational Change in the Cu(I) Complex for Sensing Mechanical Properties.

When designing photoresponsive materials, the impact of a polymer host matrix on the photophysical and photochemical properties of chromophores can be dramatic and advantageous for correlating macromolecular properties. Some compounds possess changes in their photophysical response with variation in the surrounding media (e.g., crystalline glass vs solution). This study demonstrates how changes in the excited state dynamics of [Cu(dmp)2]+, where dmp = 2,9-dimethyl-1,10-phenanthroline, are used to quantitatively probe the viscosity of the surrounding polymer matrix. A correlation of both excited state lifetime and photoluminescence emission wavelength on viscosity was observed in different supramolecular materials containing [Cu(dmp)2]+. These effects were attributed to restricted photoinduced structural distortion of the Cu(I) complex as the polymer matrix hardened. This photoluminescence sensor features a greater dynamic range for viscosity sensing (6 orders of magnitude) and displayed larger changes in lifetime response with respect to typical organometallic mechanosensitive probes.

Photoresponsive Polysaccharide-Based Hydrogels with Tunable Mechanical Properties for Cartilage Tissue Engineering.

Photoresponsive hydrogels were obtained by coordination of alginate-acrylamide hybrid gels (AlgAam) with ferric ions. The photochemistry of Fe(III)-alginate was used to tune the chemical composition, mechanical properties, and microstructure of the materials upon visible light irradiation. The photochemical treatment also induced changes in the swelling properties and transport mechanism in the gels due to the changes in material composition and microstructure. The AlgAam gels were biocompatible and could easily be dried and rehydrated with no change in mechanical properties. These gels showed promise as scaffolds for cartilage tissue engineering, where the photochemical treatment could be used to tune the properties of the material and ultimately change the growth and extracellular matrix production of chondrogenic cells. ATDC5 cells cultured on the hydrogels showed a greater than 2-fold increase in the production of sulfated glycosaminoglycans (sGAG) in the gels irradiated for 90 min compared to the dark controls. Our method provides a simple photochemical tool to postsynthetically control and adjust the chemical and mechanical environment in these gels, as well as the pore microstructure and transport properties. By changing these properties, we could easily access different levels of performance of these materials as substrates for tissue engineering.

Changing Mechanical Strength in Cr(III)- Metallosupramolecular Polymers with Ligand Groups and Light Irradiation.

We have demonstrated the ability to control the mechanical properties of metallosupramolecular materials via choice of ligand binding group, as well as with external light irradiation. These photoresponsive Cr(III)-based materials were prepared from a series of modified hydrogenated poly(ethylene-co-butylene) polymers linked through metal-ligand interactions between a Cr(III) metal center and pyridyl ligand termini of the polymers. The introduction of these Cr(III)-pyridine bonds gave rise to new mechanical and optical properties of the polymer materials. Depending on the type of pyridyl ligand, density functional theory calculations revealed changes in coordination to the Cr(III), which ultimately led to materials with significantly different mechanical properties. Electronic excitation of the Cr(III) materials with 450 and 655 nm CW lasers (800 mW/cm(2)) resulted in generation of excited state photophysical processes which led to temporary softening of the materials up to 143 kPa (41.5%) in storage modulus (G') magnitude. The initial mechanical strength of the materials was recovered when the light stimulus was removed, and no change in mechanical properties was observed with light irradiation where there was no absorbance by the Cr(III) moiety. These materials demonstrate that introduction of metal-ligand bonding interactions into polymers enables the design and synthesis of photoresponsive materials with tunable optical-mechanical properties not seen in traditional polymeric materials.

Light-responsive iron(III)-polysaccharide coordination hydrogels for controlled delivery.

Visible-light responsive gels were prepared from two plant-origin polyuronic acids (PUAs), alginate and pectate, coordinated to Fe(III) ions. Comparative quantitative studies of the photochemistry of these systems revealed unexpected differences in the photoreactivity of the materials, depending on the polysaccharide and its composition. The roles that different functional groups play on the photochemistry of these biomolecules were also examined. Mannuronic-rich alginates were more photoreactive than guluronic acid-rich alginate and than pectate. The microstructure of alginates with different mannuronate-to-guluronate ratios changed with polysaccharide composition. This influenced the gel morphology and the photoreactivity. Coordination hydrogel beads were prepared from both Fe-alginate and Fe-pectate. The beads were stable carriers of molecules as diverse as the dye Congo Red, the vitamin folic acid, and the antibiotic chloramphenicol. The photoreactivity of the hydrogel beads mirrored the photoreactivity of the polysaccharides in solution, where beads prepared with alginate released their cargo faster than beads prepared with pectate. These results indicate important structure-function relationships in these systems and create guidelines for the design of biocompatible polysaccharide-based materials where photoreactivity and controlled release can be tuned on the basis of the type of polysaccharide used and the metal coordination environment.

Light-controlled release of nitric oxide from solid polymer composite materials using visible and near infra-red light.

Photochemical Nitric oxide releasing composite materials (Photo-NORMs) were prepared using biocompatible polymers and the photochemical nitric oxide donor complex (CrONO). We have demonstrated nitric oxide (NO) release from the solid composites for extended (>30 hours) and controlled (20-100 pmoles s(-1)) durations after visible light irradiation. Quantitation of the efficiency of NO release from the composites shows that polymer gas permeability most dramatically affects the overall efficiency (QY) of photochemical NO release, where polymers with higher gas permeability have a higher QY of nitric oxide release. Composites were also prepared with ß-phase lanthanide-doped NaYF4 upconverting nanoparticles (UCNPs). Controlled Nitric oxide release was achieved via near infrared (NIR) irradiation. A prototype LED device shows proof-of-concept that such photoresponsive NO-releasing composites could be applied to implantable systems, where the amount of NO released is modulated by changing irradiation time and light intensity. This research provides the guidelines necessary to move towards device fabrication and testing in actual tissue to evaluate the photo-NORMS as a reliable option for nitric oxide release in vivo.

Plasmonic nanocrystal solar cells utilizing strongly confined radiation.

The ability of metal nanoparticles to concentrate light via the plasmon resonance represents a unique opportunity for funneling the solar energy in photovoltaic devices. The absorption enhancement in plasmonic solar cells is predicted to be particularly prominent when the size of metal features falls below 20 nm, causing the strong confinement of radiation modes. Unfortunately, the ultrashort lifetime of such near-field radiation makes harvesting the plasmon energy in small-diameter nanoparticles a challenging task. Here, we develop plasmonic solar cells that harness the near-field emission of 5 nm Au nanoparticles by transferring the plasmon energy to band gap transitions of PbS semiconductor nanocrystals. The interfaces of Au and PbS domains were designed to support a rapid energy transfer at rates that outpace the thermal dephasing of plasmon modes. We demonstrate that central to the device operation is the inorganic passivation of Au nanoparticles with a wide gap semiconductor, which reduces carrier scattering and simultaneously improves the stability of heat-prone plasmonic films. The contribution of the Au near-field emission toward the charge carrier generation was manifested through the observation of an enhanced short circuit current and improved power conversion efficiency of mixed (Au, PbS) solar cells, as measured relative to PbS-only devices.

Engineering bright sub-10-nm upconverting nanocrystals for single-molecule imaging.

Imaging at the single-molecule level reveals heterogeneities that are lost in ensemble imaging experiments, but an ongoing challenge is the development of luminescent probes with the photostability, brightness and continuous emission necessary for single-molecule microscopy. Lanthanide-doped upconverting nanoparticles overcome problems of photostability and continuous emission and their upconverted emission can be excited with near-infrared light at powers orders of magnitude lower than those required for conventional multiphoton probes. However, the brightness of upconverting nanoparticles has been limited by open questions about energy transfer and relaxation within individual nanocrystals and unavoidable tradeoffs between brightness and size. Here, we develop upconverting nanoparticles under 10 nm in diameter that are over an order of magnitude brighter under single-particle imaging conditions than existing compositions, allowing us to visualize single upconverting nanoparticles as small (d = 4.8 nm) as fluorescent proteins. We use advanced single-particle characterization and theoretical modelling to find that surface effects become critical at diameters under 20 nm and that the fluences used in single-molecule imaging change the dominant determinants of nanocrystal brightness. These results demonstrate that factors known to increase brightness in bulk experiments lose importance at higher excitation powers and that, paradoxically, the brightest probes under single-molecule excitation are barely luminescent at the ensemble level.

Liposome encapsulation of a photochemical NO precursor for controlled nitric oxide release and simultaneous fluorescence imaging.

Described are photochemical studies of the nitric oxide precursors, trans-Cr(L)(ONO)(2)(+) (L = cyclam = 1,4,8,11-tetraazacyclotetradecane, CrONO, or L = mac = 5,7-dimethyl-6-anthracenylcyclam, mac-CrONO) encapsulated in phosphatidylcholine liposomes. The liposomes provide a means to maintain a localized high concentration of NO releasing complexes and are easily modified for in vivo targeting through self-assembly. Steady, controlled release of NO is seen after photolysis of the liposome-encapsulated CrONO as compared to the burst of NO release seen by the unencapsulated complex in oxygenated solutions. The quantum yields for photochemical NO release from liposome-encapsulated CrONO and mac-CrONO were determined in both oxygenated and anoxic solutions. The quantum yield for NO release in oxygenated solution for encapsulated CrONO was more than 5 times larger than that of unencapsulated CrONO, thus the net NO released after photolysis in oxygenated solutions is enhanced by encapsulation of CrONO in liposomes. Encapsulated mac-CrONO shows NO release after photolysis with low-intensity blue light. Furthermore, the fluorescence of mac-CrONO can be detected through the liposomes, thus allowing for development of theranostic NO delivery vessels where tracking and imaging can occur simultaneously with therapeutic NO release. This work provides insight into the development of multifunctional liposome constructs for disease theranostics.

Quantum dot photoluminescence quenching by Cr(III) complexes. Photosensitized reactions and evidence for a FRET mechanism.

Reported are quantitative studies of the energy transfer from water-soluble CdSe/ZnS and CdSeS/ZnS core/shell quantum dots (QDs) to the Cr(III) complexes trans-Cr(N(4))(X)(2)(+) (N(4) is a tetraazamacrocycle ligand, X(-) is CN(-), Cl(-), or ONO(-)) in aqueous solution. Variation of N(4), of X(-), and of the QD size and composition allows one to probe the relationship between the emission/absorption overlap integral parameter and the efficiency of the quenching of the QD photoluminescence (PL) by the chromium(III) complexes. Steady-state studies of the QD PL in the presence of different concentrations of trans-Cr(N(4))(X)(2)(+) indicate a clear correlation between quenching efficiency and the overlap integral largely consistent with the predicted behavior of a Förster resonance energy transfer (FRET)-type mechanism. PL lifetimes show analogous correlations, and these results demonstrate that spectral overlap is an important consideration when designing supramolecular systems that incorporate QDs as photosensitizers. In the latter context, we extend earlier studies demonstrating that the water-soluble CdSe/ZnS and CdSeS/ZnS QDs photosensitize nitric oxide release from the trans-Cr(cyclam)(ONO)(2)(+) cation (cyclam = 1,4,8,11-tetraazacyclotetradecane) and report the efficiency (quantum yield) for this process. An improved synthesis of ternary CdSeS core/shell QDs is also described.

Combinatorial discovery of lanthanide-doped nanocrystals with spectrally pure upconverted emission.

Nanoparticles doped with lanthanide ions exhibit stable and visible luminescence under near-infrared excitation via a process known as upconversion, enabling long-duration, low-background biological imaging. However, the complex, overlapping emission spectra of lanthanide ions can hinder the quantitative imaging of samples labeled with multiple upconverting probes. Here, we use combinatorial screening of multiply doped NaYF(4) nanocrystals to identify a series of doubly and triply doped upconverting nanoparticles that exhibit narrow, spectrally pure emission spectra at various visible wavelengths. We then developed a comprehensive kinetic model validated by our extensive experimental data set. Applying this model, we elucidated the energy transfer mechanisms giving rise to spectrally pure emission. These mechanisms suggest design rules for electronic level structures that yield robust color tuning in lanthanide-doped upconverting nanoparticles. The resulting materials will be useful for background-free multicolor imaging and tracking of biological processes.