RESUMEN
OBJECTIVE: The aim of this multicenter, randomized controlled trial was to compare the clinical and radiographic outcomes of 6-mm or 11-mm implants, placed in the posterior maxilla and mandible, during a 5-year follow-up period. MATERIALS AND METHODS: Ninety-five patients with adequate bone height for 11-mm implants, were randomly allocated to a 6-mm group (test group with short implants) or an 11-mm group (control group with standard-length implants). Two or three implants of the same length were placed in each patient and after 6 weeks loaded with a splinted provisional restoration. This was followed by definitive splinted restoration 6 months after implant placement. Clinical and radiographic parameters, including the occurrence of complications were recorded. RESULTS: A total of 49 patients were enrolled to receive 6-mm implants (n = 108) and 46 patients to receive 11-mm implants (n = 101). Three implants (two of 6 mm and one of 11 mm in length) were lost before loading and one 6-mm implant after 15 months of function, and one 11-mm implant was lost during the first year of function. The 5-year survival rates were 96.0% and 98.9% in the 6-mm and 11-mm group, respectively. The mean marginal bone level changes 5 years post-loading were 0.01 ± 0.45 mm (bone gain) in the 6-mm group and -0.12 ± 0.93 mm (bone loss) in the 11-mm group (p = .7670). Clinical parameters, including plaque, bleeding on probing and pocket probing depth were not significantly different between the groups, and also technical complications were low. CONCLUSION: The clinical and radiographic outcomes of 6-mm short and 11-mm standard-length implants were not different during a 5-year evaluation period.
Asunto(s)
Pérdida de Hueso Alveolar , Implantes Dentales , Carga Inmediata del Implante Dental , Pérdida de Hueso Alveolar/diagnóstico por imagen , Pérdida de Hueso Alveolar/etiología , Implantación Dental Endoósea , Diseño de Prótesis Dental , Prótesis Dental de Soporte Implantado , Fracaso de la Restauración Dental , Estudios de Seguimiento , Humanos , Resultado del TratamientoRESUMEN
OBJECTIVES: The present multi-center randomized controlled clinical trial sought to compare the marginal bone level (MBL) changes and survival of 6- and 11-mm implants. MATERIAL AND METHODS: Ninety-five patients receiving a total of 209 dental implants were enrolled. Subjects were randomly allocated to two cohorts: test (4.0 × 6 mm; N = 108) or control (4.0 × 11 mm; N = 101) implant groups. To be randomized, all edentulous sites were anatomically qualified to receive 11 mm implant. Two to three implants were placed in maxillary or mandibular posterior regions and loaded with splinted provisional restoration after 6 weeks and definitive restoration 6 months thereafter. Test and control implants were followed by clinical and radiographic examinations on an annual basis up to 3 years. RESULTS: Radiographic assessment of MBL 3 years after loading revealed the bone to be located at 0.27 mm (±0.40) and 0.44 mm (±0.74) apical to the implant platform in the test and control groups, respectively. During the 3 years of follow-up since loading, 0.04 mm (±0.43) MBL gain and 0.02 mm (±0.76) of MBL loss were observed in the 6-mm (test) and 11-mm (control) groups, respectively. The MBL's for test and control were significantly different (p = 0.000) in favor of short implants. The cumulative survival rates from placement after 3 years were 96% and 99% for the 6- and 11-mm implants, respectively, with no statistical significance. CONCLUSIONS: Reconstruction of partially edentulous posterior maxilla or mandible with 6- or 11-mm implants led to stable marginal bone level and high implant survival rate after 3 years.
Asunto(s)
Pérdida de Hueso Alveolar , Implantación Dental Endoósea/instrumentación , Implantes Dentales , Diseño de Prótesis Dental , Arcada Parcialmente Edéntula/cirugía , Adulto , Pérdida de Hueso Alveolar/diagnóstico por imagen , Pérdida de Hueso Alveolar/patología , Aumento de la Cresta Alveolar , Implantes Dentales/efectos adversos , Femenino , Estudios de Seguimiento , Humanos , Arcada Parcialmente Edéntula/diagnóstico por imagen , Arcada Parcialmente Edéntula/patología , Masculino , Persona de Mediana Edad , Radiografía DentalRESUMEN
OBJECTIVE: To evaluate the use of a single Astra Tech implant to support a two-unit cantilever fixed dental prosthesis. MATERIALS AND METHOD: Twenty-nine subjects with an edentulous space (at least equivalent to two bicuspid units) in the premolar/molar segments of the maxilla or mandible with opposing natural teeth or a fixed/removable prosthesis were treated. They were provided with either a 4 or 5.0 mm diameter fixture MT OsseoSpeed. Prostheses were constructed using a cast-to abutment as a one-piece unit with porcelain fused to precious metal to allow direct screw retention. RESULTS: Subjects expressed a high satisfaction with treatment, including appearance and function. The most important complication was abutment screw loosening. It occurred as a single episode in four subjects and in another six subjects the loosening was recurrent. Bone levels were stable and there were no significant differences in radiographic bone height between cantilever and non-cantilever sides of the implant at any time point. CONCLUSION: Single implants can be successfully used to support two-unit cantilever FDPs in the premolar region. A common factor could not be identified in relation to abutment screw loosening.
Asunto(s)
Implantes Dentales , Prótesis Dental de Soporte Implantado , Dentadura Parcial Fija , Arcada Parcialmente Edéntula/cirugía , Adolescente , Adulto , Anciano , Distribución de Chi-Cuadrado , Pilares Dentales , Diseño de Prótesis Dental , Femenino , Humanos , Arcada Parcialmente Edéntula/diagnóstico por imagen , Masculino , Persona de Mediana Edad , Estudios Prospectivos , Radiografía , Estadísticas no Paramétricas , Resultado del TratamientoRESUMEN
OBJECTIVE: To assess the accuracy of measuring the cortical bone thickness adjacent to dental implants using two cone beam computed tomography (CBCT) systems. MATERIAL AND METHODS: Ten 4 x 11 mm Astra Tech implants were placed at varying distances from the cortical bone in two prepared bovine ribs. Both ribs were scanned in a reproducible position using two different CBCT scanners. Ten examiners each carried out four measurements on all 10 implants using the two CBCT systems: vertical distance between the top of the implant and the alveolar crest (IT-AC), and thickness of the cortical bone from the outer surface of the implant threads at 3, 6 and 9 mm from the top of the implant. Ground sections were prepared and bone thickness was measured using a light microscope and a graticule to give a gold standard (GS) measurement. RESULTS: The examiner's measurements were significantly different between CBCT systems for the vertical and thickness dimensions (P<0.001) while measuring the cortical bone thickness between 0.3 and 3.7 mm. Within that range, i-CAT NG measurements were consistently underestimated in comparison with the GS. Accuitomo 3D60 FPD measurements closely approximated the GS, except when cortical bone thickness was <0.8 mm. The mean percentage errors from the GS at 3, 6 and 9 mm measurement levels were 68%, 28% and 18%, respectively, for i-CAT NG and 23%, 5% and 6%, respectively, for Accuitomo 3D60 FPD. CONCLUSIONS: Within the limitations of this study, it was concluded that i-CAT NG (voxel size 0.3) may not produce sufficient resolution of the thin cortical bone adjacent to dental implants and, therefore, the measurements may not be accurate; whereas, Accuitomo 3D60 FPD (voxel size 0.125) may produce better resolution and more accurate measurement of the thin bone.
Asunto(s)
Proceso Alveolar/diagnóstico por imagen , Densidad Ósea/fisiología , Tomografía Computarizada de Haz Cónico/instrumentación , Implantes Dentales , Animales , Bovinos , Valores de Referencia , Costillas/cirugíaRESUMEN
UNLABELLED: There have been rapid developments in dental implant treatment protocols to reduce the time between implant placement and restoration. Implants may be placed immediately following tooth extraction or following a period of healing to allow resolution of residual infection or sufficient bone and soft tissue healing. Early restoration and loading of implants has to be carefully controlled to avoid increased failure and complications. Advantages and disadvantages of the various techniques are described. CLINICAL RELEVANCE: The clinician should adopt a treatment protocol that ensures a high success rate and a long-term functional and aesthetic implant restoration. Rapid treatment protocols can be considered when they do not compromise these goals, and the clinician is sufficiently experienced in their application.