RESUMEN
Microemulsion (ME) has been investigated as a chemical polishing (CP) fluid for effective polishing of single crystal potassium dihydrogen phosphate (KDP), perfectly avoiding the generation of mechanical stress. In this work, a water-in-deep eutectic solvent ME was proposed as the polishing fluid for CP of single crystal KDP. Deep eutectic solvent (DES) is formulated using n-octanol as hydrogen bond donor and methyltrioctylammonium chloride (MTOAC) as hydrogen bond acceptor, with a mass ratio of 2:1. The ME was prepared by mixing DES as the oil phase (12.5 %, wt.), a hydrochloric acid solution as the water phase (12.5 %, wt.), and isopropanol as the cosolvent (75 %, wt.), without adding any other surfactants. The properties of the ME were characterized by conductivity measurements and ultraviolet (UV) spectroscopy. The reactivity of ME with KDP was measured by the conductivity method, and it was higher at low pH values. A hydrochloric acid solution with a pH of 3 was selected as aqueous phase, considering its effects on particle size, salt loading, and static etching rate. The water content affects the polarity of ME and the final water content was determined to be 12.5 % to ensure high polarity of ME. The surface quality of the KDP crystals before and after polishing was examined using grazing incidence X-ray diffraction (GIXRD) analysis. The average roughness of the KDP crystal surface was decreased from 1.96 nm to 1.43 nm, and the root-mean-square (RMS) roughness was reduced from 2.81 nm to 1.86 nm, demonstrating a significant polishing effect. Finally, the polishing mechanism was elucidated in terms of the irreversible chemical reaction between the active components in the microemulsion and the KDP crystals.
RESUMEN
Light is a vital environmental factor that promotes the growth and development of edible fungi mycelium. Under white light, the mycelium color of Sanghuangporus vaninii shifts during its growth stages. To investigate the impact of visible light on mycelial morphogenesis, a comparative transcriptomic analysis was conducted. This analysis revealed the molecular processes that underpin mycelial growth and development in S. vaninii when cultured in both darkness and light conditions. From the analysis, 13,643 genes were aligned using Illumina raw reads. Of these, 596 genes exhibited significant expression changes under white light exposure. Specifically, 226 genes were upregulated and 370 downregulated, spanning 55 different metabolic pathways. We further classified differentially expressed genes (DEGs), these genes play roles in photomorphogenesis, signal transduction, carbohydrate metabolism, and melanin production, among other processes. Some are also implicated in cell cycle regulation and the differential expression of respiratory functions. The validation of the differentially expressed transcripts using qRT-PCR showed complete agreement with RNA-Seq data for 9 transcripts. Meanwhile, the light had an inhibitory effect on the bioactive components in S. vaninii. These findings offer valuable insights into the transcriptional shifts and molecular mechanisms driving the color change in S. vaninii under light exposure, providing a basis for further research into mechanisms of light-response regulation.
RESUMEN
Ginkgo biloba is widely planted as a colorful foliage tree, and its leaf can be used as a biomass energy source, but it has been underutilized for a long time. The aim of this study was to investigate the potential of garden waste as a substrate component in the cultivation process of the king oyster mushroom (Pleurotus eryngii), with the goal of enhancing both the yield of P. eryngii and the efficiency of energy use. The percentages of G. biloba leaf powder in the substrate were 10.5% and 21% to replace sawdust or sugarcane bagasse in a typical substrate. A substrate formulation that could completely replace sawdust and sugarcane bagasse was selected by analyzing mycelial growth rate, days of production, fruiting body length, biological efficiency, yield, stipe thickness, pileus diameter and laccase activity. The results showed that Y1 (treatment with 21% G. biloba leaf powder and sugarcane bagasse) had the highest yield (303.1 ± 31.9 g), which was higher than that of CK (control) (259.3 ± 37.4 g). The crude fiber content of the samples grown on substrate Y1 (as 7.43%) was higher than CK (7.37%). In addition, P. eryngii grown on substrate Y1 had the highest laccase activity for the complete colonization of the mycelium. Thus, these findings suggest that G. biloba leaf powder represents a viable and economical supplement for enhancing both the yield and quality of P. eryngii.
RESUMEN
The basic leucine zipper (bZIP) transcription factor (TF) is widespread among eukaryotes and serves different roles in fungal processes including nutrient utilization, growth, stress responses and development. The oyster mushroom (Pleurotus ostreatus) is an important and widely cultivated edible mushroom worldwide; nevertheless, reports are lacking on the identification or function of bZIP gene family members in P. ostreatus. Herein, 11 bZIPs on 6 P. ostreatus chromosomes were systematically identified, which were classified into 3 types according to their protein sequences. Phylogenetic analysis of PobZIPs with other fungal bZIPs indicated that PobZIPs may have differentiated late. Cis-regulatory element analysis revealed that at least one type of stress-response-related element was present on each bZIP promoter. RNA-seq and RT-qPCR analyses revealed that bZIP expression patterns were altered under heat stress and different developmental stages. We combined results from GST-Pull-down, EMSA and yeast two-hybrid assays to screen a key heat stress-responsive candidate gene PobZIP3. PobZIP3 overexpression in P. ostreatus enhanced tolerance to high temperature and cultivation assays revealed that PobZIP3 positively regulates the development of P. ostreatus. RNA-seq analysis showed that PobZIP3 plays a role in glucose metabolism pathways, antioxidant enzyme activity and sexual reproduction. These results may support future functional studies of oyster mushroom bZIP TFs.
Asunto(s)
Pleurotus , Pleurotus/genética , Filogenia , Respuesta al Choque Térmico , Factores de Transcripción con Cremalleras de Leucina de Carácter Básico/genética , Factores de Transcripción con Cremalleras de Leucina de Carácter Básico/metabolismo , Secuencia de AminoácidosRESUMEN
Ultraviolet (UV) A radiation (315-400 nm) is the predominant component of solar UV radiation that reaches the Earth's surface. However, the underlying mechanisms of the positive effects of UV-A on photosynthetic organisms have not yet been elucidated. In this study, we investigated the effects of UV-A radiation on the growth, photosynthetic ability, and metabolome of the edible cyanobacterium Nostoc sphaeroides. Exposures to 5-15 W m-2 (15-46 µmol photons m-2 s-1) UV-A and 4.35 W m-2 (20 µmol photons m-2 s-1) visible light for 16 days significantly increased the growth rate and biomass production of N. sphaeroides cells by 18%-30% and 15%-56%, respectively, compared to the non-UV-A-acclimated cells. Additionally, the UV-A-acclimated cells exhibited a 1.8-fold increase in the cellular nicotinamide adenine dinucleotide phosphate (NADP) pool with an increase in photosynthetic capacity (58%), photosynthetic efficiency (24%), QA re-oxidation, photosystem I abundance, and cyclic electron flow (87%), which further led to an increase in light-induced NADPH generation (31%) and ATP content (83%). Moreover, the UV-A-acclimated cells showed a 2.3-fold increase in ribulose-1,5-bisphosphate carboxylase/oxygenase activity, indicating an increase in their carbon-fixing capacity. Gas chromatography-mass spectrometry-based metabolomics further revealed that UV-A radiation upregulated the energy-storing carbon metabolism, as evidenced by the enhanced accumulation of sugars, fatty acids, and citrate in the UV-A-acclimated cells. Therefore, our results demonstrate that UV-A radiation enhances energy flow and carbon assimilation in the cyanobacterium N. sphaeroides.IMPORTANCEUltraviolet (UV) radiation exerts harmful effects on photo-autotrophs; however, several studies demonstrated the positive effects of UV radiation, especially UV-A radiation (315-400 nm), on primary productivity. Therefore, understanding the underlying mechanisms associated with the promotive effects of UV-A radiation on primary productivity can facilitate the application of UV-A for CO2 sequestration and lead to the advancement of photobiological sciences. In this study, we used the cyanobacterium Nostoc sphaeroides, which has an over 1,700-year history of human use as food and medicine, to explore its photosynthetic acclimation response to UV-A radiation. As per our knowledge, this is the first study to demonstrate that UV-A radiation increases the biomass yield of N. sphaeroides by enhancing energy flow and carbon assimilation. Our findings provide novel insights into UV-A-mediated photosynthetic acclimation and provide a scientific basis for the application of UV-A radiation for optimizing light absorption capacity and enhancing CO2 sequestration in the frame of a future CO2 neutral, circular, and sustainable bioeconomy.
Asunto(s)
Nostoc , Rayos Ultravioleta , Humanos , Biomasa , Carbono/metabolismo , Dióxido de Carbono/metabolismo , Nostoc/metabolismo , Fotosíntesis/fisiologíaRESUMEN
Thermoelectric (TE) building materials have the potential to revolutionize sustainable architecture by converting temperature differences into electrical energy. This study introduces geopolymeric TE materials enhanced with manganese dioxide (MnO2 ) as a modifying agent. Calorimetric experiments examine the impact of MnO2 on geopolymerization. Mechanical tests show that adding MnO2 (up to 5% by weight) improves the geopolymer composite's strength, achieving a peak compressive strength of 36.8 MPa. The Seebeck effect of the MnO2 -modified geopolymeric composite is also studied. The inclusion of MnO2 boosts the Seebeck coefficient of the geopolymer, reaching a notable 4273 µV C-1 at a 5% MnO2 dosage. This enhancement is attributed to an increase in the density of states (DOS) and a reduction in relaxation time. However, excessive MnO2 or high alkali levels may adversely affect the Seebeck coefficient by lengthening the relaxation time.
RESUMEN
The laccase gene family encodes multiple isozymes that are crucial for the degradation of substrates and the regulation of developmental processes in fungi. Pleurotus eryngii is an important edible and medicinal fungus belonging to the Basidiomycota phylum and can grow on a variety of natural substrates. In the present study, genome-wide profiling of P. eryngii identified 10 genes encoding its laccase isoenzymes. Conservative sequence analysis demonstrated that all PeLacs possess classical laccase structural domains. Phylogenetic analysis yielded four major subgroups, the members of which are similar with respect to conserved gene organization, protein domain architecture, and consensus motifs. The 10 PeLacs formed three groups together with 12 PoLacs in Pleurotus ostreatus, indicating that they share a high level of evolutionary homology. Cis-responsive element analysis implied that PeLacs genes play a role in growth and development and lignocellulose degradation. Targeted overexpression of PeLac5 reduced the time to primordia formation and their development to fruiting bodies. Gene expression patterns in the presence of different lignocellulosic substrates indicate that three PeLacs genes (2, 4, and 9) are key to lignocellulose degradation. This work presents the first inventory of laccase genes in P. eryngii and preliminarily explores their functions, which may help to uncover the manner by which these proteins utilize substrates.
RESUMEN
Sanghuangporus vaninii is a profitable traditional and medicinal edible fungus with uncommon therapeutic properties and medicinal value. The accumulation of active ingredients in this fungus that is used in traditional Chinese medicine is affected by its years of growth, and their pharmacological activities are also affected. However, the effects of age on the medicinal value of fruiting bodies of S. vaninii cultivated on cut log substrate remain unclear. In this study, an untargeted liquid chromatography mass spectrometry (LC-MS)-based metabolomics approach was performed to characterize the profiles of metabolites from 1-, 2- and 3-year-old fruiting bodies of S. vaninii. A total of, 156 differentially accumulated metabolites (DAMs) were screened based on the criterion of a variable importance projection greater than 1.0 and p < 0.01, including 75% up regulated and 25% down regulated. The results of enrichment of metabolic pathways showed that the metabolites involved the biosynthesis of plant secondary metabolites, biosynthesis of amino acids, central carbon metabolism in cancer, steroid hormone biosynthesis, linoleic acid metabolism, prolactin signaling pathway, and arginine biosynthesis, and so on. The biosynthesis of plant secondary metabolites pathway was significantly activated. Five metabolites were significantly elevated within the growth of fruiting bodies, including 15-keto-prostaglandin F2a, (4S, 5R)-4,5,6-trihydroxy-2-iminohexanoate, adenylsuccinic acid, piplartine, and chenodeoxycholic acid. 15-keto-prostaglandin F2a is related to the pathway of arachidonic acid metabolism and was significantly increased up to 1,320- and 535-fold in the 2- and 3-year-old fruiting bodies, respectively, compared with those in the 1-year-old group. The presence of these bioactive natural products in S. vaninii is consistent with the traditional use of Sanghuang, which prompted an exploration of its use as a source of natural prostaglandin in the form of foods and nutraceuticals. These findings may provide insight into the functional components of S. vaninii to develop therapeutic strategies.
RESUMEN
Biomanufacturing of ethylene is particularly important for modern society. Cyanobacterial cells are able to photosynthesize various valuable chemicals. A promising platform for next-generation biomanufacturing, the semiconductor-cyanobacterial hybrid systems are capable of enhancing the solar-to-chemical conversion efficiency. Herein, the native ethylene-producing capability of a filamentous cyanobacterium Nostoc sphaeroides is confirmed experimentally. The self-assembly characteristic of N.â sphaeroides is exploited to facilitate its interaction with InP nanomaterial, and the resulting biohybrid system gave rise to further elevated photosynthetic ethylene production. Based on chlorophyll fluorescence measurement and metabolic analysis, the InP nanomaterial-augmented photosystem I activity and enhanced ethylene production metabolism of biohybrid cells are confirmed, the mechanism underlying the material-cell energy transduction as well as nanomaterial-modulated photosynthetic light and dark reactions are established. This work not only demonstrates the potential application of semiconductor-N.â sphaeroides biohybrid system as a good platform for sustainable ethylene production but also provides an important reference for future studies to construct and optimize nano-cell biohybrid systems for efficient solar-driven valuable chemical production.
Asunto(s)
Etilenos , FotosíntesisRESUMEN
Herein, a cascade [3 + 2] annulation of N-aryloxyacetamides with 3-(hetero)arylpropiolic acids affording benzofuran-2(3H)-ones via rhodium(iii)-catalyzed redox-neutral C-H functionalization/isomerization/lactonization using an internal oxidative directing group O-NHAc was achieved. This catalytic system provides a regio- and stereoselective approach to synthesize (Z)-3-(amino(aryl)methylene)benzofuran-2(3H)-ones with exclusive Z configuration selectivity, acceptable yields and good functional group tolerance. Preliminary investigations on ultraviolet-visible and fluorescence behaviors reveal that the annulation products may be applied as a promising fluorescent probe for sensing metal cations, especially for cerium (Ce3+).
RESUMEN
A cascade [3 + 2] annulation and ring opening of N-aryloxyacetamides with 1-alkynylcyclobutanols via Rh(III)-catalyzed redox-neutral C-H/C-C activations using internal oxidative O-NHAc and -OH as the dual directing groups has been achieved. This reaction provided an efficient and regioselective approach to benzofuran derivatives with good functional group compatibility and high yields.
RESUMEN
An efficient and convenient copper-mediated method has been developed to achieve direct cascade C-H/N-H annulation to synthesize 2-quinolinones from electron-deficient acrylamides and arynes. This method highlights an emerging but simple strategy to transform inert C-H bonds into versatile functional groups in organic synthesis to provide a new method of synthesizing 2-quinolinones efficiently. Mechanistic investigations by experimental and density functional theory (DFT) studies suggest that an organometallic C-H activation via a Cu(iii) intermediate is likely to be involved in the reaction.
RESUMEN
A Rh(III)-catalyzed cascade [3 + 2] annulation of N-phenoxyacetamides with propiolates under mild conditions using the internal oxidative O-N bond as the directing group has been achieved. This catalytic system provides a regio- and stereoselective access to benzofuran-2(3 H)-ones bearing exocyclic enamino motifs with exclusive Z configuration selectivity, acceptable to good yields and good functional group compatibility. Mechanistic investigations by experimental and density functional theory studies suggest that a consecutive process of C-H functionalization/isomerization/lactonization is likely to be involved in the reaction.
RESUMEN
The power conversion efficiency of perovskite solar cells has been boosted rapidly, it has so far exceeded that of commercial polycrystalline silicon solar cells. This has prompted great interest in large-scale production and deployment of perovskite solar cells. However, state-of-the-art perovskite solar cells are fabricated inside gloveboxes and further annealing at high temperatures (typically at >100 °C for 30 min) is needed. These two required conditions are not compatible with, either in the respect to high-throughput or thermal budget, a feasible industrial production process. By eliminating the two requirements, the deposition of perovskite films both at room temperature and under ambient air condition will make the scalable roll-to-roll fabrication scheme feasible. Here, the anti-solvent (chloroform) washing is introduced to the previously developed hydrochloride-assisted method and demonstrate that the room-temperature method can be carried out under ambient air condition for MAPbI3 film deposition. Through this new procedure, a power conversion efficiency as high as 17.72% is achieved for MAPbI3 planar devices fabricated under a relative humidity of 30% at room temperature. Further, it is revealed that the room-temperature process MAPbI3 films show a near monoexponential decay pathway with a long photoluminescence lifetime of >400 ns.
RESUMEN
An efficient and convenient palladium-catalyzed direct intermolecular silylation of C(sp2)-H bonds by using disilanes as the silicon source with the assistance of a readily removable bidentate directing group is reported. This strategy provided a regio- and stereoselective protocol for exclusive synthesis of Z-vinylsilanes with reasonable to excellent yields and good functional group compatibility. Silylation of the isolated palladacycle intermediate revealed the Z-stereoselective pathway. Moreover, the practicality and effectiveness of this method were illustrated by a gram-scale experiment and further functionalization of the silylation product.
RESUMEN
A novel functional KH2PO4 (KDP) aqueous solution-in-oil (KDP aq/O) microemulsion system for KDP crystal ultra-precision chemical-mechanical polishing (CMP) was prepared. The system, which consisted of decanol, Triton X-100, and KH2PO4 aqueous solution, was available at room temperature. The functional KDP aq/O microemulsion system was systematically studied and applied as polishing solution to KDP CMP technology. In this study, a controlled deliquescent mechanism was proposed for KDP polishing with the KDP aq/O microemulsion. KDP aqueous solution, the chemical etchant in the polishing process, was caged into the micelles in the microemulsion, leading to a limitation of the reaction between the KDP crystal and KDP aqueous solution only if the microemulsion was deformed under the effect of the external force. Based on the interface reaction dynamics, KDP aqueous solutions with different concentrations (cKDP) were applied to replace water in the traditional water-in-oil (W/O) microemulsion. The practicability of the controlled deliquescent mechanism was proved by the decreasing material removal rate (MRR) with the increasing of the cKDP. As a result, the corrosion pits on the KDP surface were avoided to some degree. Moreover, the roughnesses of KDP with KDP aq/O microemulsion (cKDP was changed from 10 mM to 100 mM) as polishing solutions were smaller than that with the W/O microemulsion. The smallest surface root-mean-square roughness of 1.5 nm was obtained at a 30 mmol/L KDP aq solution, because of the most appropriate deliquescent rate and MRR.
RESUMEN
An efficient and convenient copper-catalyzed method has been developed to achieve direct ortho-C-H/N-H annulation to synthesize phenanthridinones with arynes. This method highlights an emerging strategy to transform inert C-H bonds into versatile functional groups in organic synthesis and provides a new way to synthesize phenanthridinone alkaloids efficiently.
RESUMEN
An efficient and convenient method has been developed to achieve direct silylation of unactivated remote primary or secondary C(sp3)-H bonds to form C-Si bonds with hexamethyldisilane (HMDS). This method highlights the emerging strategy to transform unactivated methyl or methylene into versatile functional groups in organic synthesis and provides a new method to construct functionalized C-Si bonds for synthetic chemistry.
RESUMEN
Uniform perovskite films are achieved by HCl-assisted one-step spin-coating at room temperature. By this method, a highest power conversion efficiency of 17.9% is obtained for perovskite solar cells (PSCs). The devices retain ≈95% of their original efficiency after storage in air for two months. The highest efficiency obtained for large-area PSCs (0.86 cm2 ) is 15.7%.
RESUMEN
The direct and efficient construction of α-aryl-ß-substituted cyclic ketone scaffolds has been achieved using a Cu-mediated one-pot Michael addition/α-arylation strategy. The reaction features easily available materials, broad substrate scope, moderate to good yield, and an excellent diastereoselectivity.