Sulfate Derivatives with Heteroleptic Tetrahedra: New Deep-ultraviolet Birefringent Materials in which Weak Interactions Modulate Functional Module Ordering.

Deep-ultraviolet (UV) birefringent materials are urgently needed to facilitate light polarization in deep-UV lithography. Maximizing anisotropy by regulating the alignment of functional modules is essential for improving the linear optical performance of birefringent materials. In this work, we proposed a strategy to design deep-UV birefringent materials that achieve functional module ordering via weak interactions. Following this strategy, four compounds CN4H7SO3CF3, CN4H7SO3CH3, C(NH2)3SO3CH3, and C(NH2)3SO3CF3 were identified as high-performance candidates for deep-UV birefringent materials. The millimeter-sized crystals of CN4H7SO3CF3, CN4H7SO3CH3, and C(NH2)3SO3CH3 were grown, and the transmittance spectra show that their cutoff edges are below 200 nm. CN4H7SO3CF3 exhibits the largest birefringence (0.149 @ 546 nm, 0.395 @ 200 nm) in the deep-UV region among reported sulfates and sulfate derivatives. It reveals that the hydrogen bond can modulate the module ordering of the heteroleptic tetrahedra and planar π-conjugated cations, thus greatly enhancing the birefringence. Our study not only discovers new deep-UV birefringent materials but also provides an upgraded strategy for optimizing optical anisotropy to achieve efficient birefringence.

LiNa2Ca8B12O24F6Cl and Li1.2Na2.8B6O11: A Case of Cation-Induced Birefringence Enhancement via Dimensional Changes of Highly Polymerized [B12O24] Motifs.

Borates, due to their structural chemistry diversity and exceptional performance, are premier material systems for investigating UV optical crystals. The B-O anionic groups with high polymerization (B ≥ 6) are much less in the borate-based system, which is worthy of further research. Herein, cations with different radii and proportions are introduced to borate system, and two new highly polymerized borates, LiNa2Ca8B12O24F6Cl (LNCBFC) and Li1.2Na2.8B6O11 (LNBO) were designed and synthesized successfully. LNCBFC possesses commonly isolated high-symmetry [B12O24] groups, while the structure of LNBO contains an unprecedented 1∞[B12O22] chain constructed by [B12O24] groups. Owing to the orientation of the functional motifs in the chain structure, LNBO displays an enhanced birefringence, which is about 25 × higher than that of LNCBFC and retains a short UV cutoff edge (< 200 nm). Even more significantly, a discussion of the cationic modulation of [B12O24]-based compounds and the patterns of isolated [BnO2n] motifs consisting of B-O rings was carried out by reviewing previous studies and existing borates. This work puts forward a decent structure design and property regulation strategy for highly polymerized borates.

ß-CsHg2I5, a compound with rare [Hg2I5] dimers and large optical anisotropy.

Hg-based compounds show abundant structural diversity and distinguished properties. Herein, a new phase transition compound CsHg2I5 was reported. The high-temperature phase ß-CsHg2I5 with rare [Hg2I5] dimers was synthesized by the flux method at 573 K, and it shows a reversible phase transition at a low temperature of ∼100 K to form the low-temperature phase α-CsHg2I5. The two phases crystallize in the same P21/c space group, with different crystal structures. ß-CsHg2I5 is composed of rare [Hg2I5] dimers and [CsI11] polyhedral units, while α-CsHg2I5 is composed of [Hg4I11] and [CsI10] units. The experimental band gap of ß-CsHg2I5 was found to be 2.58 eV. Owing to the presence of [Hg2I5]∞ pseudo-layers, ß-CsHg2I5 exhibits large optical anisotropy with a calculated birefringence of 0.132@1064 nm. Meanwhile, ß-CsHg2I5 is a congruent compound and the congruent point is ∼481 K. Theoretical calculations indicate that the rare [Hg2I5] dimer is a nonlinear active unit, which can be used as a new fundamental building block for the design of advanced nonlinear optical materials. Moreover, a CsI-HgI2 pseudo-binary diagram was drawn. The results enrich the structural diversity of Hg-based halides and give some insights into the development of new functional materials based on rare [Hg2I5] dimers.

A Machine-Learning-Assisted Crystalline Structure Prediction Framework To Accelerate Materials Discovery.

Modern crystal structure prediction methods based on structure generation algorithms and first-principles calculations play important roles in the design of new materials. However, the cost of these methods is very expensive because their success mostly relies on the efficient sampling of structures and the accurate evaluation of energies for those sampled structures. Herein, we develop a Machine-learning-Assisted CRYStalline Materials sAmpling sysTem (MAXMAT) aiming to accelerate the prediction of new crystal structures. For a given chemical composition, MAXMAT can generate efficient crystal structures with the help of a Python package for crystal structure generation (PyXtal) and can quickly evaluate the energies of these generated structures using a well-developed machine learning interaction potential model (M3GNET). We have used MAXMAT to perform crystal structure searches for three different chemical systems (TiO2, MgAl2O4, and BaBOF3) to test its accuracy and efficiency. Furthermore, we apply MAXMAT to predict new nonlinear optical materials, suggesting several thermodynamically synthesizable structures with high performance in LiZnGaS3 and CaBOF3 systems.

CsAlB3O6Cl: the rational construction of a KBBF-type structure with aligned 2∞[AlB3O6Cl] layers via introducing unprecedented [AlO3Cl] tetrahedra.

The first chloroaluminoborate, CsAlB3O6Cl, with innovative AlO3Cl tetrahedra and a perfect planar arrangement of [B3O6] groups, was structurally designed and synthesized via chlorination of [AlO4] tetrahedra. Simultaneously, the smooth introduction of the [AlO3Cl] group into borates initiates the development of a chloroaluminoborate and greatly enriches the structural chemistry of aluminoborates.

Structure-Prediction-Oriented Synthesis of Thiophosphates as Promising Infrared Nonlinear Optical Materials.

Oriented synthesis of functional materials is a focus of attention in material science. As one of the most important function materials, infrared nonlinear optical materials with large second harmonic generation effects and broad optical band gap are in urgent need. In this work, directed by the theoretical structure prediction, the first series of non-centrosymmetric (NCS) alkali-alkaline earth metal [PS4]-based thiophosphates LiCaPS4 (Ama2), NaCaPS4 (P21), KCaPS4 (Pna21), RbCaPS4 (Pna21), CsCaPS4 (Pna21) were successfully synthesized. Comprehensive characterizations reveal that ACaPS4 could be regarded as promising IR NLO materials, exhibiting wide band gap (3.77-3.86 eV), moderate birefringence (0.027-0.064 at 1064 nm), high laser-induced damage threshold (LIDT, ~10×AGS), and suitable phase-matching second harmonic generation responses (0.4-0.6×AGS). Structure-properties analyses illustrate that the Ca-S bonds show non-ignorable covalent feature, and [PS4] together with [CaSn] units play dominant roles to determine the band gap and SHG response. This work indicates that Li-, Na- and K- analogs may be promising infrared nonlinear optical material candidates, and this is the first successful case of "prediction to synthesis" involving infrared (IR) nonlinear optical (NLO) crystals in the thiophosphate system and may provide a new avenue to the design and oriented synthesis of high-performance function materials in the future.

Wide band gap selenide infrared nonlinear optical materials AIIMg6Ga6Se16 with strong SHG responses and high laser-induced damage thresholds.

Infrared (IR) nonlinear optical (NLO) materials with strong NLO response, wide band gap and high laser-induced damage threshold (LIDT) are highly expected in current laser technologies. Herein, by introducing double alkaline-earth metal (AEM) atoms, three wide band gap selenide IR NLO materials AIIMg6Ga6Se16 (AII = Ca, Sr, Ba) with excellent linear and NLO optical properties have been rationally designed and fabricated. AIIMg6Ga6Se16 (AII = Ca, Sr, Ba) are composed of unique [AIISe6] triangular prisms, [MgSe6] octahedra and [GaSe4] tetrahedra. The introduction of double AEMs effectively broadens the band gaps of selenide-based IR NLO materials. Among them, CaMg6Ga6Se16, achieving the best balance between the second-harmonic generation response (∼1.5 × AgGaS2), wide band gap (2.71 eV), high LIDT (∼9 × AgGaS2), and moderate birefringence of 0.052 @ 1064 nm, is a promising NLO candidate for high power IR laser. Theoretical calculations indicate that the NLO responses and band gaps among the three compounds are mainly determined by the NLO-active [GaSe4] units. The results enrich the chemical diversity of chalcogenides, and give some insight into the design of new functional materials based on the rare [AIISe6] prismatic units.

Recent advances in rational structure design for nonlinear optical crystals: leveraging advantageous templates.

Nonlinear optical (NLO) crystals that can expand the spectral range of laser outputs have attracted significant attention for their optoelectronic applications. The research progress from the discovery of new single crystal structures to the realization of final device applications involves many key steps and is very time consuming and challenging. Consequently, exploring efficient design strategies to shorten the research period and accelerate the rational design of novel NLO materials has become imperative to address the pressing demand for advanced materials. The recent shift in paradigm toward exploring new NLO crystals involves significant progress from extensive "trial and error" methodologies to strategic approaches. This review proposes the concept of rational structure design for nonlinear optical crystals leveraging advantageous templates. It further discusses their optical characteristics, promising applications as second-order NLO materials, and the relationship between their structure and performance, and highlights urgent issues that need to be addressed in the field of NLO crystals in the future. The review aims to provide ideas and driving impetus to encourage researchers to achieve new breakthroughs in the next generation of NLO materials.

Two Hydroxyfluorooxoborates Achieving Deep-Ultraviolet Cutoff Edges and Moderate Birefringence by Assembling Multi-Anionic Groups.

Assembling multi-anionic groups is conducive to utilizing respective advantage to achieve the enhancement of optical performance. Two new hydroxyfluorooxoborates, Ama2-Rb2B3O3F4(OH) and K8Cs2B15O14(OH)7F20 ⋅ H2O with [B3O3F4(OH)] six-membered rings were synthesized for the first time. The title compounds exhibit short ultraviolet cutoff edges (<200 nm) and K8Cs2B15O14(OH)7F20 ⋅ H2O possesses a moderate experimental refractive index difference of 0.051@546 nm.

Where do the Fluorine Atoms Go in Inorganic-Oxide Fluorinations? A Fluorooxoborate Illustration under Terahertz Light.

The substitution of fluorine atoms for oxygen atoms/hydroxyl groups has emerged as a promising strategy to enhance the physical and chemical properties of oxides/hydroxides in fluorine chemistry. However, distinguishing fluorine from oxygen/hydroxyl in the reaction products poses a significant challenge in existing characterization methods. In this study, we illustrate that terahertz (THz) spectroscopy provides a powerful tool for addressing this challenge. To this end, we investigated two fluorination reactions of boric acid, utilizing MHF2 (M=Na, C(NH2)3) as fluorine reagents. Through an interplay between THz spectroscopy and solid-state density functional theory, we have conclusively demonstrated that fluorine atoms exclusively bind with the sp3-boron but not with the sp2-boron in the reaction products of Na[B(OH)3][B3O3F2(OH)2] (NaBOFH) and [C(NH2)3]2B3O3F4OH (GBF2). Based on this evidence, we have proposed a reaction pathway for the fluorinations under investigation, a process previously hindered due to structural ambiguity. This work represents a step forward in gaining a deeper understanding of the precise structures and reaction mechanisms involved in the fluorination of oxides/hydroxides, illuminated by the insights provided by THz spectroscopy.

New antimony fluorooxoborates with strong birefringence and unprecedented structural characterisation.

Fluorooxoborates constitute a rich source of optical crystals due to their structural diversity and excellent performance. Antimony fluorooxoborates with stereochemically active lone pairs of electrons still have not been found, although the first antimony borate was discovered several years ago. In this study, we have achieved the successful synthesis of the first antimony(III) fluorooxoborate with an unprecedented [B2O4F]∞ chain, namely SbB2O4F. Remarkably, SbB2O4F shows strong birefringence (0.171@1064 nm) and short UV cutoff edges (about 220 nm) according to calculations. The birefringence of SbB2O4F mainly originates from the highly distorted [SbO4] groups.

Fluorination Strategy Towards Symmetry Breaking of Boron-centered Tetrahedron for Poly-fluorinated Optical Crystals.

Borate crystals can be chemically and functionally modified by the fluorination strategy, which encourages the identification of emerging fluorooxoborates with a structure and set of characteristics not seen in any other oxide parents. However, the bulk of fluorooxoborates have been found accidentally, rational methods of synthesis are required, particularly for the infrequently occurring poly-fluorinated components. Herein, we reported the use of bifluoride salts as a potent source of fluorine to prepare fluorooxoborates that contain rarely tri-fluorinated [BF3 X] (X=O and CH3 ) tetrahedra and eleven compounds were found. We identified the optical properties of the organofluorinated group [CH3 BF3 ] and their potential for nonlinear optics for the first time. Among these, two non-centrosymmetric components hold potential for the production of 266 nm harmonic coherent light for nonlinear optics, and more crucially, have the benefit of growing large size single crystals. Our study establishes experimental conditions for the coexistence of the diverse functional groups, enabling the production of poly-fluorinated optical crystals.

AIB3 IIC2 IIIQ6 VIXVII: A Thioborate Halide Family for Developing Wide Bandgap Infrared Nonlinear Materials by Coupling Planar [BS3] and Polycations.

Developing high-performance infrared (IR) nonlinear optical (NLO) materials is urgent but challenging due to the competition between NLO coefficient and bandgap in one compound. Herein, by coupling NLO-active [BS3] planar units and halide-centered polycations, six new metal thioborate halides ABa3B2S6X (A = Rb, Cs; X = Cl, Br, I) composed of zero-dimensional [XBamRbn/Csn] polycations and [BS3] units, belonging to a new A I B 3 II C 2 III Q 6 VI X VII ${\mathrm{A}}^{\mathrm{I}}{\mathrm{B}}_{3}^{\mathrm{II}}{\mathrm{C}}_{2}^{\mathrm{III}}{\mathrm{Q}}_{6}^{\mathrm{VI}}{\mathrm{X}}^{\mathrm{VII}}$ family, are rationally designed and fabricated. The compounds show an interesting structural transition from Pbcn (ABa3B2S6Cl) to Cmc21 (ABa3B2S6Br and ABa3B2S6I) driven by the clamping effect of polycationic frameworks. ABa3B2S6Br and ABa3B2S6I are the first series metal thioborate halide IR NLO materials, and the introduction of [BS3] unit effectively widens the bandgap of planar unit-constructed chalcogenides. ABa3B2S6Br and ABa3B2S6I, exhibiting wide bandgaps (3.55-3.60 eV), high laser-induced damage thresholds (≈ 6 × AgGaS2), and strong SHG effects (0.5-0.6 × AgGaS2) with phase-matching behaviors, are the promising IR NLO candidates for high-power laser applications. The results enrich the chemical and structural diversity of boron chemistry and give some insights into the design of new IR NLO materials with planar units.

PbTeB4O9: a lead tellurium borate with unprecedented fundamental building block [B4O10] and large birefringence.

Herein, the first lead tellurium borate, PbTeB4O9, with an unprecedented fundamental building block [B4O10] was successfully synthesized. The near-parallel alignment of [B4O10] groups and [TeO3] polyhedra resulted in a high birefringence (0.099@1064 nm). The structure-property relationship was discussed by using the first-principles calculations.

(C(NH2)3)2(I2O5F)(IO3)(H2O) and C(NH2)3IO2F2: Two Guanidine Fluorooxoiodates with Wide Band Gap and Large Birefringence.

Enhancing anisotropy through an effective synergistic arrangement of anionic and cationic groups is crucial for improving the birefringence optical properties of materials. In this work, by transforming I-O into I-F through the fluorination strategy, two metal-free guanidine fluorooxoiodates (C(NH2)3)2(I2O5F)(IO3)(H2O) and C(NH2)3IO2F2 and one guanidine iodate C(NH2)3IO3 were successfully synthesized using the hydrothermal method. An unprecedented dimer [I2O5F] formed by [IO3F] and [IO3] in (C(NH2)3)2(I2O5F)(IO3)(H2O) was found, which greatly enriches the structural diversity of fluorooxoiodates. All three compounds feature a relatively large birefringence (Δn = 0.068, 0.110 and 0.075 at 546 nm) and a short ultraviolet cutoff edge. The theoretical calculation was carried out to understand the electronic structures and linear optical properties.

Cd8(BO3)4SiO4: Metal Cation Inducing the Formation of Isolated [BO3] and [SiO4] Units in Borate Silicate.

The first compound of cadmium-borate silicate Cd8(BO3)4SiO4, crystallizing in space group P42/n (no. 86), has been successfully synthesized by the conventional high-temperature solution method and melts congruently. The zero-dimensional anionic groups of Cd8(BO3)4SiO4 are isolated [BO3] triangles and isolated [SiO4] tetrahedra which are filled in the framework formed by [CdO6] polyhedra. It has a moderate birefringence (Δn = 0.053 at 546 nm), which is measured by experiment and evaluated by first-principles calculations; meanwhile, the source of birefringence is revealed through the response electronic distribution anisotropy method. The UV-vis-NIR diffuse reflectance spectrum indicates that Cd8(BO3)4SiO4 possesses a wide optical transparency range, with a UV cutoff edge at about 254 nm. This work enriches the structure chemistry of borate silicates, and we discussed the possible methods for the exploration and synthesis of novel optical crystals possessing zero-dimensional anionic groups in the borate silicate system.

[RbSr3X][(BS3)2] (X = Cl, Br): two salt-inclusion thioborates with large birefringence and structure transformation from centrosymmetric to asymmetric.

[RbSr3X][(BS3)2] (X = Cl, Br), two salt-inclusion chalcogenides with planar [BS3] as anionic units, were obtained. Structure analysis indicates that the size effect of halogens may adjust the arrangement between the [BS3] units and further lead to the CS-to-NCS structure transformation. Experimental characterizations reveal that they have wide bandgaps (3.64-3.70 eV), large birefringence (0.136-0.144) and high LIDT (12-14 × AgGaS2). This work indicates that the thioborate family is a rich source to explore structure chemistry and promising infrared functional materials.

Breaking the Inherent Interarrangement of [B3O6] Clusters for Nonlinear Optics with Orbital Hybridization Enhancement.

The [B3O6] group as a prime functional unit provides borates with intrinsic properties that are modified by coordination to cations. Inherent [B3O6] cluster structures in borates exclusively made of them have a near-plane configuration, with more than 90% of them having a maximum dihedral angle of zero and the remaining ones being less than 13°. Although such an inherent configuration can produce considerable birefringence for good phase-matching ability, this is not conducive to obtaining high conversion efficiency and beam quality due to the walk-off effects in the nonlinear optical process. In this article, two new borate halides Ca2B3O6X (X = Cl and Br) were reported, in which the confinement effects of distorted halogen-centered secondary building blocks compress the existence space of [B3O6] primitives, resulting in the nonparallel arrangement between [B3O6] clusters in this series. Both compounds show large second harmonic generation effects, and more importantly, the broken inherent interarrangement of [B3O6] clusters makes them a moderate birefringence and small walk-off angle. Their moderate birefringence is due to the large angular alignment between [B3O6] clusters, resulting from the orbital hybridization between the Ca s and the O p orbitals of the terminal O atoms on [B3O6] clusters. Our model supports this viewpoint and offers guidelines for rearranging [B3O6] clusters' arrangements in borates.

Hydroxyfluorooxoborate (NH4)[C(NH2)3][B3O3F4(OH)] for exploring the effects of cation substitution on structure and optical properties.

Cation substitution is a straightforward but effective technique for improving the structure and properties; however, controlling directed substitution still poses significant difficulties. Herein, a metal-free hydroxyfluorooxoborate (NH4)[C(NH2)3][B3O3F4(OH)] has been synthesized using the strategy of heterologous substitution based on the template of A2[B3O3F4(OH)]. Tunable structure and optical properties have been achieved via varied A-site cation substitution. The intrinsic mechanism for this tunability was established by crystallography and theoretical research.