RESUMEN
Silica-based ceramics doped with calcium and magnesium have been proposed as suitable materials for scaffold fabrication. Akermanite (Ca2MgSi2O7) has attracted interest for bone regeneration due to its controllable biodegradation rate, improved mechanical properties, and high apatite-forming ability. Despite the profound advantages, ceramic scaffolds provide weak fracture resistance. The use of synthetic biopolymers such as poly(lactic-co-glycolic acid) (PLGA) as coating materials improves the mechanical performance of ceramic scaffolds and tailors their degradation rate. Moxifloxacin (MOX) is an antibiotic with antimicrobial activity against numerous aerobic and anaerobic bacteria. In this study, silica-based nanoparticles (NPs) enriched with calcium and magnesium, as well as copper and strontium ions that induce angiogenesis and osteogenesis, respectively, were incorporated into the PLGA coating. The aim was to produce composite akermanite/PLGA/NPs/MOX-loaded scaffolds through the foam replica technique combined with the sol-gel method to improve the overall effectiveness towards bone regeneration. The structural and physicochemical characterizations were evaluated. Their mechanical properties, apatite forming ability, degradation, pharmacokinetics, and hemocompatibility were also investigated. The addition of NPs improved the compressive strength, hemocompatibility, and in vitro degradation of the composite scaffolds, resulting in them keeping a 3D porous structure and a more prolonged release profile of MOX that makes them promising for bone regeneration applications.
RESUMEN
Engineered electrospun membranes have emerged as promising materials in guided tissue regeneration, as they provide an appropriate framework for the formation of new functional periodontal tissues. The development of multifunctional local drug delivery systems with sustained release of drugs for prolonged infection control can be used in periodontal surgical interventions to simultaneously prohibit epithelium downgrowth and ensure proper healing and regeneration of damaged periodontal tissues. The aim of the present study was the fabrication of novel composite membranes from PLGA/moxifloxacin-loaded mesoporous nanocarriers through electrospinning and the evaluation of their drug release profiles. The addition of moxifloxacin-loaded mesoporous nanocarriers in PLGA yielded a sustained and prolonged drug release, while maintaining satisfactory mechanical strength. The freshly fabricated membranes were found to be biocompatible at masses less than 1 mg after exposure to healthy erythrocytes. Increase in the amount of polymer led to more uniform fibers with large diameters and pores. The study of the parameters of the electrospinning process indicated that increase in the applied voltage value and rotation speed of the collector led to more uniform fibers with higher diameter and larger pores, suitable for tissue regeneration applications, such as periodontal tissue regeneration.
RESUMEN
Ion doping has rendered mesoporous structures important materials in the field of tissue engineering, as apart from drug carriers, they can additionally serve as regenerative materials. The purpose of the present study was the synthesis, characterization and evaluation of the effect of artemisinin (ART)-loaded cerium-doped mesoporous calcium silicate nanopowders (NPs) on the hemocompatibility and cell proliferation of human periodontal ligament fibroblasts (hPDLFs). Mesoporous NPs were synthesized in a basic environment via a surfactant assisted cooperative self-assembly process and were characterized using Scanning Electron Microscopy (SEM), X-ray Fluorescence Spectroscopy (XRF), Fourier Transform Infrared Spectroscopy (FT-IR), X-ray Diffraction Analysis (XRD) and N2 Porosimetry. The loading capacity of NPs was evaluated using Ultrahigh Performance Liquid Chromatography/High resolution Mass Spectrometry (UHPLC/HRMS). Their biocompatibility was evaluated with the MTT assay, and the analysis of reactive oxygen species was performed using the cell-permeable ROS-sensitive probe 2',7'-dichlorodihydrofluorescein diacetate (H2DCFDA). The synthesized NPs presented a mesoporous structure with a surface area ranging from 1312 m2/g for undoped silica to 495 m2/g for the Ce-doped NPs, excellent bioactivity after a 1-day immersion in c-SBF, hemocompatibility and a high loading capacity (around 80%). They presented ROS scavenging properties, and both the unloaded and ART-loaded NPs significantly promoted cell proliferation even at high concentrations of NPs (125 µg/mL). The ART-loaded Ce-doped NPs with the highest amount of cerium slightly restricted cell proliferation after 7 days of culture, but the difference was not significant compared with the control untreated cells.
RESUMEN
The present study focuses on the investigation of the successive pictorial phases of the wall painting which survives on the missing eastern part of the magnificent mosaic composition in the interior of Rotunda, Thessaloniki, Greece. Rotunda, a circular domed monumental building, was constructed in the early 4th century AD and it is included in the UNESCO World Heritage List. Characterization analysis was performed by means of microscopic, spectroscopic and crystallographic techniques, in order to identify the technological features of the wall painting and the materials used, to document the initial Byzantine pictorial phase -known from the archaeological research- along with the overpaintings attributed to the 19th and 20th centuries. In this framework, the collected samples were studied with optical microscopy, Fourier transform infrared micro-spectroscopy, scanning electron microscopy, X-ray diffractometry and X-ray photoelectron spectroscopy. Among the detected materials and pigments (including zinc oxide, barium sulfate, red lead, green earth, Prussian blue, emerald green, ultramarine and cuprite), the use of brass powder for false gilding purposes was detected, which is a material rarely used for mural applications.
RESUMEN
Calcium magnesium silicate glasses could be suggested for the synthesis of scaffolds for hard tissue regeneration, as they present a high residual glassy phase, high hardness values and hydroxyapatite-forming ability. The use of trace elements in the human body, such as Cu, could improve the biological performance of such glasses, as Cu is known to play a significant role in angiogenesis. Nano-bioceramics are preferable compared to their micro-scale counterparts, because of their increased surface area, which improves both mechanical properties and apatite-forming ability due to the increased nucleation sites provided, their high diffusion rates, reduced sintering time or temperature, and high mechanical properties. The aim of the present work was the evaluation of the effect of different ratios of Ethanol/TEOS and total amount of the inserted ammonia to the particle size, morphology and bioactive, hemolytic and antibacterial behavior of nanoparticles in the quaternary system SiO2-CaO-MgO-CuO. Different ratios of Ethanol/TEOS and ammonia amount affected the size and morphology of bioactive nanopowders. The optimum materials were synthesized with the highest ethanol/TEOS ratio and ammonia amount as verified by the enhanced apatite-forming ability and antibacterial and non-hemolytic properties.
Asunto(s)
Amoníaco/farmacología , Calcio/química , Cobre/química , Etanol/farmacología , Silicatos/síntesis química , Apatitas/síntesis química , Apatitas/química , Materiales Biocompatibles/síntesis química , Materiales Biocompatibles/química , Cerámica/síntesis química , Cerámica/química , Relación Dosis-Respuesta a Droga , Eritrocitos/citología , Eritrocitos/efectos de los fármacos , Etanol/química , Vidrio/química , Humanos , Ensayo de Materiales , Nanocompuestos/química , Silicatos/química , Silicatos/farmacología , Dióxido de Silicio/química , Propiedades de Superficie/efectos de los fármacosRESUMEN
Saint Demetrius of Stomion is a historical monastery placed in the geographical area of Larissa town, Greece, with a remarkable presence from its founding until nowadays. The monastery's present catholicon (main church) has been dated in the 16th century and its surviving wall paintings were constructed in 1758. In addition to the characterization of the materials applied, the purpose of this study is to determine the existence of a sole pictorial phase, that of the mid-18th century, or the occurrence of overpaintings. Additionally, the present study aims to begin the establishment of the documentation of materials and techniques of the late post-Byzantine iconographic guilds, which acted in Central and Northern Greece. The collected samples were analyzed by means of microscopic, spectroscopic and thermogravimetric methods. The use of fresco technique is implied by the major participation of calcium carbonate in all of the painting layers, its main contribution in the plaster layers and the microstratigraphic analysis of the samples' cross-sections, while the scarce and local presence of a proteinaceous material implies the limited use of egg-tempera technique for the highlights. The pigment analysis shows that mostly traditional pigments were used, including cinnabar, ferrous pigments (ochre, sienna, umber), minium, Naples yellow, massicot/litharge, green earth (celadonite), malachite, carbon and bone black, calcite, kaolinite and lead white. The absence of modern pigments, the consistency of all samples regarding microstratigraphy and applied materials, and the lack of the extensive use of an organic medium, strongly suggest the lack of overpaintings.
RESUMEN
The aim of this study was to evaluate microhardness and elastic modulus of a novel sol-gel derived dental ceramic -â¯58S bioactive glass composite (BP67: Bioactive Glass:33.3%, Dental Ceramic:66.7%) BP671 material by micro-indentation and to investigate its microstructure and bioactivity. The research hypotheses were that the values of microhardness (1) and elastic modulus (2) of the novel bioceramic composite and the commercial dental ceramic will be of the same order. The experimental sol-gel derived ceramics showed similar microstructural characteristics to a commercial feldspathic porcelain, and presence of additional calcium phosphate phases, which contributed its bioactivity. The formation of an apatite-like layer on the materials' surface observed by Fourier Transform Infrared (FTIR)2 spectroscopy, X-ray Diffraction (XRD)3 and Scanning Electron Microscopy-Energy Dispersive Spectroscopy (SEM-EDS)4 techniques after 12 days of maintenance in Conventional Simulated Body Fluid (cSBF)5 solution. The BP67 exhibited values of microhardness and modulus of elasticity which were not statistically significant different compared to dental ceramic, indicating the adequate mechanical integrity of the material. The results of this study suggest that the novel bioactive composite could be potentially applied in prosthetic dentistry, while its thermal and optical properties should be investigated in future studies.
Asunto(s)
Porcelana Dental/química , Vidrio/química , Ensayo de Materiales , Fenómenos Mecánicos , Módulo de ElasticidadRESUMEN
Aim: Antimicrobial and bioactive restorative materials are needed to develop a bacteria free environment and tight bond with the surrounding tissue, preventing the spread of secondary caries and thus extending the lifetime of dental restorations. The characteristic properties of new dental bioactive and antibacterial composites are presented in this work. The new composites have been microstructurally characterized and both long and short term properties have been studied. Methods: The Ag-doped sol-gel derived bioactive glass (Ag-BG) was incorporated into resin composite in concentrations 5, 10, and 15 wt.%, to fabricate new Ag-doped bioactive and antibacterial dental composites (Ag-BGCOMP). The microstructural properties and elemental analysis of the developed Ag-BGCOMP was observed. The total bond strength (TBS) was measured immediately and after long term of immersion in medium using microtensile testing. The capability of Ag-BGCOMPs to form apatite layer on their surface after immersion in Simulated Body Fluid (SBF) as well as the bacteria growth inhibition in a biofilm formed by Streptococcus mutans (S. mutans) were evaluated. Results: Homogeneous distribution of Ag-BG particles into the resin composite was observed microstructurally for all Ag-BGCOMPs. The TBS measurements showed non-statistically significant difference between control samples (Ag-BG 0 wt.%) and Ag-BGCOMP specimens. Moreover, the total bond strength between the surrounding tooth tissue and the material of restoration does not present any statistically significant change for all the cases even after 3 months of immersion in the medium. The bioactivity of the Ag-BGCOMPs was also shown by the formation of a calcium-phosphate layer on the surface of the specimens after immersion in SBF. Antibacterial activity was observed for all Ag-BGCOMPs, statistically significant differences were observed between control samples and Ag-BGCOMPs. Accordingly, the number of dead bacteria in the biofilm found to increase significantly with the increase of Ag-BG concentration in the Ag-BGCOMPs. Conclusions: New resin composites with antibacterial and remineralizing properties have been manufactured. Characterization of these materials provides a rationale for future clinical trials to evaluate clinical benefits and outcomes in comparison with currently used dental materials. Significance: The new developed composites could ultimately prevent restoration failure and could advance patients' wellbeing.
RESUMEN
STATEMENT OF PROBLEM: The color of an esthetic restoration and its color stability are important for long-term success. However, the impact of common beverages on lithium disilicate ceramic is not well known. PURPOSE: The purpose of this in vitro study was to investigate color variations of lithium disilicate ceramics after thermocycling (TC) and immersion in commonly consumed beverages. MATERIAL AND METHODS: A total of 288 specimens (1×10×10 mm) were fabricated from IPS e-max computer-aided design (CAD) (n=72), IPS e-max CERAM ([CER] n=72), IPS e-max Press with glazing ([PG] n=72), and IPS e-max Press without glazing ([PNG] n=72) according to the manufacturer's instructions. Each group was divided into 4 subgroups (n=18): TC, coffee, black tea, and red wine. Thermocycling was performed at 21 900 cycles at 5°C, 37°C, 55°C, and 37°C (3 years' clinical simulation), whereas the specimens were soaked in the staining solutions for up to 54 hours (3 years' clinical simulation). Color parameters L*, a*, and b* were assessed with an ultraviolet-visible spectroscopy recording spectrophotometer. Color difference (ΔE) was calculated using the equation [ΔΕ= [(ΔL*)2 + (Δa*)2 + (Δb*)2]½]. Intraexaminer reliability was assessed by using the intraclass correlation coefficient. Two-way analysis of variance was used for the analysis of ΔΕ, and the parameters L*, a*, and b* were analyzed with linear mixed models for repeated measurements and the Bonferroni pair-wise comparison test (α=.05). RESULTS: Parameters ΔΕ, L*, a*, and b* were significantly affected by the interaction between material and treatment (P<.001). A ΔΕ >1 was recorded for PG with tea, wine, and coffee, PG after TC and CER after TC. For L*, greater reduction was observed for PNG with tea and CER after TC, whereas for a* significant changes were positive (to red shades), except for PNG with TC, where PNG with wine showed the greatest positive change. For b*, significant changes were negative (to blue shades) except for PNG with tea and coffee and CAD with tea. CONCLUSIONS: All groups demonstrated color changes below the clinically perceptible level (ΔΕ<3.7), except PNG in tea which showed statistically significant color differences (ΔΕ>4). CAD presented higher color stability compared with the nonglazed Press specimens.
Asunto(s)
Bebidas , Color , Porcelana Dental , Humanos , Inmersión , Técnicas In Vitro , Ensayo de MaterialesRESUMEN
PURPOSE: Fractures in long span provisional/interim restorations are a common complication. Adequate fracture toughness is necessary to resist occlusal forces and crack propagation, so these restorations should be constructed with materials of improved mechanical properties. The aim of this study was to investigate the possible reinforcement of neat silica nanoparticles and trietoxyvinylsilane-modified silica nanoparticles in a PMMA resin for fixed interim restorations. MATERIALS AND METHODS: Composite PMMA-Silica nanoparticles powders were mixed with PMMA liquid and compact bar shaped specimens were fabricated according to the British standard BS EN ISO 127337:2005. The single-edge notched method was used to evaluate fracture toughness (three-point bending test), while the dynamic thermomechanical properties (Storage Modulus, Loss Modulus, tanδ) of a series of nanocomposites with different amounts of nanoparticles (0.25%, 0.50%, 0.75%, 1% w.t.) were evaluated. Statistical analysis was performed and the statistically significant level was set to p<0.05. RESULTS: The fracture toughness of all experimental composites was remarkably higher compared to control. There was a tendency to decrease of fracture toughness, by increasing the concentration of the filler. No statistically significant differences were detected among the modified/unmodified silica nanoparticles. Dynamic mechanical properties were also affected. By increasing the silica nanoparticles content an increase in Storage Modulus was recorded, while Glass Transition Temperature was shifted at higher temperatures. CONCLUSIONS: Under the limitations of this in-vitro study, it can be suggested that both neat silica nanoparticles and trietoxyvinylsilane-modified silica nanoparticles, especially at low concentrations, may enhance the overall performance of fixed interim prostheses, as can effectively increase the fracture toughness, the elastic modulus and the Glass Transition Temperature of PMMA resins used in fixed provisional restorations.
Asunto(s)
Resinas Compuestas , Restauración Dental Provisional , Nanopartículas , Polimetil Metacrilato , Prótesis e Implantes , Análisis del Estrés Dental , Ensayo de Materiales , Docilidad , Dióxido de Silicio , Estrés Mecánico , Propiedades de SuperficieRESUMEN
The aim of this study was the evaluation of the textural characteristics of an experimental sol-gel derived feldspathic dental ceramic, which has already been proven bioactive and the investigation of its flexural strength through Weibull Statistical Analysis. The null hypothesis was that the flexural strength of the experimental and the commercial dental ceramic would be of the same order, resulting in a dental ceramic with apatite forming ability and adequate mechanical integrity. Although the flexural strength of the experimental ceramics was not statistically significant different compared to the commercial one, the amount of blind pores due to processing was greater. The textural characteristics of the experimental ceramic were in accordance with the standard low porosity levels reported for dental ceramics used for fixed prosthetic restorations. Feldspathic dental ceramics with typical textural characteristics and advanced mechanical properties as well as enhanced apatite forming ability can be synthesized through the sol-gel method.
Asunto(s)
Cerámica , Restauración Dental Permanente , Ensayo de Materiales , Aleaciones de Cerámica y Metal , Porcelana Dental , Análisis del Estrés Dental , Docilidad , Estrés Mecánico , Propiedades de SuperficieRESUMEN
OBJECTIVES: Aims of this study were to investigate the optimal conditions of laser irradiation of a novel Bioactive Glass/Dental Ceramic-BP67 composite for acceleration of hydroxyapatite-HA formation and to assess cellular responses on the precipitated HA region. METHODS: BP67 (Bioactive Glass: 33.3%, Dental Ceramic: 66.7%) was fabricated by the sol-gel method. A laser assisted biomimetic-LAB process was applied to BP67 sintered specimens immersed in 1.5-times concentrated simulated body fluid-1.5×-SBF. The effect of various energy densities of pulsed nanosecond Nd-YAG (1064nm) laser and irradiation exposure times (30min, 1 and 3h) were evaluated for HA precipitation. The HA film was characterized by FTIR, XRD, SEM and micro Raman techniques. ICP-AES was used for revealing changes in chemical composition of the 1.5×-SBF during irradiation. Cell viability and morphological characteristics of periodontal ligament fibroblasts-PDLFs, human gingival fibroblasts-HGFs and SAOS-2 osteoblasts on the HA surface were evaluated by MTT assays and SEM. RESULTS: At optimal energy fluence of 1.52J/cm2 and irradiation time for 3h followed by immersion in 1.5×-SBF at 60°C, a dense HA layer was formed on laser-irradiated BP67 within 7 days. The resulting HA film was tightly bonded to the underlying substrate and had mineral composition similar to cementum. MTT assay showed a consistent reduction of cell proliferation on the HA layer in comparison to conventional control ceramic and BP67 for all 3 cell lines studied. SIGNIFICANCE: These findings suggest LAB is an effective method for acceleration of HA formation on materials with low bioactivity, while cellular responses need further investigation.
Asunto(s)
Cerámica , Durapatita , Láseres de Estado Sólido , Porcelana Dental , Vidrio , Humanos , Microscopía Electrónica de Rastreo , Difracción de Rayos XRESUMEN
Glass-ceramic scaffolds containing Mg have shown recently the potential to enhance the proliferation, differentiation, and biomineralization of stem cells in vitro, property that makes them promising candidates for dental tissue regeneration. An additional property of a scaffold aimed at dental tissue regeneration is to protect the regeneration process against oral bacteria penetration. In this respect, novel bioactive scaffolds containing Mg(2+) and Cu(2+) or Zn(2+), ions known for their antimicrobial properties, were synthesized by the foam replica technique and tested regarding their bioactive response in SBF, mechanical properties, degradation, and porosity. Finally their ability to support the attachment and long-term proliferation of Dental Pulp Stem Cells (DPSCs) was also evaluated. The results showed that conversely to their bioactive response in SBF solution, Zn-doped scaffolds proved to respond adequately regarding their mechanical strength and to be efficient regarding their biological response, in comparison to Cu-doped scaffolds, which makes them promising candidates for targeted dental stem cell odontogenic differentiation and calcified dental tissue engineering.
RESUMEN
OBJECTIVES: Dental zirconia restorations should present long-term clinical survival and be in service within the oral environment for many years. However, low temperature degradation could affect their mechanical properties and survival. The aim of this study was to investigate the effect of in vitro aging on the flexural strength of yttrium-stabilized (Y-TZP) zirconia ceramics for ceramic restorations. METHODS: One hundred twenty bar-shaped specimens were prepared from two ceramics (ZENO Zr (WI) and IPS e.max(®) ZirCAD (IV)), and loaded until fracture according to ISO 6872. The specimens from each ceramic (nx=60) were divided in three groups (control, aged for 5h, aged for 10h). One-way ANOVA was used to assess statistically significant differences among flexural strength values (P<0.05). The variability of the flexural strength values was analyzed using the two-parameter Weibull distribution function, which was applied for the estimation of Weibull modulus (m) and characteristic strength (σ0). The crystalline phase polymorphs of the materials (tetragonal, t, and monoclinic, m, zirconia) were investigated by X-ray diffraction (XRD) analysis, Raman spectroscopy and Fourier transform infrared (FTIR) spectroscopy. RESULTS: A slight increase of the flexural strength after 5h, and a decrease after 10h of aging, was recorded for both ceramics, however statistically significant was for the WI group (P<0.05). Both ceramics presented a tâm phase transformation, with the m-phase increasing from 4 to 5% at 5h to around 15% after 10h. SIGNIFICANCE: The significant reduction of the flexural strength after 10h of in vitro aging, suggests high fracture probability for one of the zirconia ceramics tested.
Asunto(s)
Cerámica/química , Materiales Dentales/química , Itrio/química , Circonio/química , Algoritmos , Cristalografía , Módulo de Elasticidad , Ensayo de Materiales , Docilidad , Probabilidad , Espectroscopía Infrarroja por Transformada de Fourier , Espectrometría Raman , Estrés Mecánico , Propiedades de Superficie , Factores de Tiempo , Difracción de Rayos XRESUMEN
STATEMENT OF PROBLEM: The flexural strength of zirconia core ceramics must predictably withstand the high stresses developed during oral function. The in-depth interpretation of strength parameters and the probability of failure during clinical performance could assist the clinician in selecting the optimum materials while planning treatment. PURPOSE: The purpose of this study was to evaluate the flexural strength based on survival probability and Weibull statistical analysis of 2 zirconia cores for ceramic restorations. MATERIAL AND METHODS: Twenty bar-shaped specimens were milled from 2 core ceramics, IPS e.max ZirCAD and Wieland ZENO Zr, and were loaded until fracture according to ISO 6872 (3-point bending test). An independent samples t test was used to assess significant differences of fracture strength (α=.05). Weibull statistical analysis of the flexural strength data provided 2 parameter estimates: Weibull modulus (m) and characteristic strength (σ(0)). The fractured surfaces of the specimens were evaluated by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The investigation of the crystallographic state of the materials was performed with x-ray diffraction analysis (XRD) and Fourier transform infrared (FTIR) spectroscopy. RESULTS: Higher mean flexural strength (P<.001) and σ(0) were recorded for WZ ceramics. However IZ ceramics presented a higher m value and a microstructure with fewer voids and pores. The fractured surfaces presented similar fractographic properties (mirror regions followed by hackle lines zones). Both groups primarily sustained the tetragonal phase of zirconia and a negligible amount of the monoclinic phase. CONCLUSIONS: Although both zirconia ceramics presented similar fractographic and crystallographic properties, the higher flexural strength of WZ ceramics was associated with a lower m and more voids in their microstructure. These findings suggest a greater scattering of strength values and a flaw distribution that are expected to increase failure probability.
Asunto(s)
Fracaso de la Restauración Dental , Aleaciones de Cerámica y Metal/química , Docilidad , Circonio/química , Análisis del Estrés Dental , Humanos , Ensayo de Materiales , MetalurgiaRESUMEN
The aim of this study was to investigate the possible reinforcement of Nanodiamonds (ND) in a PMMA resin for fixed interim restorations. The fracture toughness (K(Ic)), impact strength and the dynamic thermomechanical properties (T(g), E´, E´´, tanδ) of a series of PMMA-ND nanocomposites with different amounts of ND were evaluated. The fracture toughness increased as the ND percentage increased up to 0.38% wt but a greater amount of ND induced a decrease in K(Ic). Impact strength and Young's modulus were also increased by increasing nanoparticles content, indicating the reinforcing effect of ND. Dynamic mechanical properties were also affected. By increasing the ND content an increase of storage modulus was recorded, while glass transition was shifted at higher temperatures. Under the limitations of this study, it can be suggested that reinforcing PMMA with ND nanoparticles -especially at low concentrations- may increase the overall performance of fixed interim prostheses.
Asunto(s)
Materiales Dentales/química , Nanodiamantes/química , Polimetil Metacrilato/química , Dentadura Parcial Fija , Dentadura Parcial Provisoria , Módulo de Elasticidad , Vidrio/química , Dureza , Humanos , Ensayo de Materiales , Fenómenos Mecánicos , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Transición de Fase , Docilidad , Estrés Mecánico , Propiedades de Superficie , Temperatura , Termodinámica , Factores de Tiempo , Temperatura de Transición , Agua/químicaRESUMEN
The rehabilitation of eroded teeth in patients suffering from bulimia nervosa generally includes ceramics. This study compared the roughness of three ceramics before and after exposure to simulated vomit solution (SVS) with a pH of 3.8. Surface roughness parameters Ra, RMS, and AH were calculated using atomic force microscopy before and after exposure to SVS (novel peristaltic pump for 24 hours at 37°C) and were analyzed statistically. Apart from the initial high AH values of the glass-ceramic, none of the parameters evaluated were statistically significantly different after acid exposure. Under the limitations of this in vitro study, the investigated ceramics seem suitable for use in bulimia nervosa patients.
Asunto(s)
Porcelana Dental/química , Ácido Gástrico/química , Aleaciones de Cerámica y Metal/química , Silicatos de Aluminio/química , Apatitas/química , Cerámica/química , Pulido Dental/métodos , Alisadura de la Restauración Dental , Humanos , Concentración de Iones de Hidrógeno , Ensayo de Materiales , Microscopía de Fuerza Atómica , Proyectos Piloto , Compuestos de Potasio/química , Propiedades de Superficie , Temperatura , Factores de TiempoRESUMEN
OBJECTIVES: A wide variety of dental ceramics compositions have been introduced in dental clinical practice in order to combine desired aesthetics with superior mechanical performance. The aim of the present study was to investigate the microstructural changes in three dental ceramics after their sintering according to manufacturers' instructions and to comparatively evaluate some of their physical, mechanical and biological properties. METHODS: The analysis of the phases present in each material before and after sintering was performed with scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction analysis (XRD). The thermal properties of ceramic specimens were evaluated with differential thermal and thermogravimetric analysis (TG-DTA). The mechanical properties evaluated were fracture toughness, Young's modulus and microhardness with the Vickers indentation method. MTT assay was used for cell proliferation assessment. One-way analysis of variance (ANOVA) with Bonferroni multiple comparisons tests was used to determine statistically significant differences (significance level of p<0.05). RESULTS: Results showed a remarkable variation among the three ceramic compositions of leucite content in the starting unheated ceramic powders ranging between 14 and 32 wt.% and in the respective sintered powders ranging between 15 and 41 wt.% The low fusing glass-ceramic and the high fusing leucite-based ceramic presented significantly higher fracture toughness (p<0.001) and microhardness and lower modulus of elasticity (p<0.05) compared to the low fusing feldspathic ceramic. The three ceramics were almost equivalent concerning their in vitro biological behavior. SIGNIFICANCE: Variations in crystal structure, distribution and composition are related to differences concerning mechanical properties of dental ceramics.
Asunto(s)
Materiales Biocompatibles/química , Porcelana Dental/química , Diseño de Prótesis Dental , Aleaciones de Cerámica y Metal/química , Silicatos de Aluminio/química , Apatitas/química , Proliferación Celular , Células Cultivadas , Colorantes , Análisis Diferencial Térmico , Elasticidad , Fibroblastos/citología , Vidrio/química , Dureza , Calor , Humanos , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Periodoncio/citología , Compuestos de Potasio/química , Espectroscopía Infrarroja por Transformada de Fourier , Estrés Mecánico , Propiedades de Superficie , Sales de Tetrazolio , Termogravimetría , Tiazoles , Difracción de Rayos XRESUMEN
The solid-state transformation phenomena of spinodal decomposition and nucleation and growth are presented as tools to create nanostructured thermoelectric materials with very low thermal conductivity and greatly enhanced figure of merit. The systems (PbTe)(1-x)(PbS)(x) and (Pb(0.95)Sn(0.05)Te)(1-x)(PbS)(x) are not solid solutions but phase separate into PbTe-rich and PbS-rich regions to produce coherent nanoscale heterogeneities that severely depress the lattice thermal conductivity. For x > approximately 0.03 the materials are ordered on three submicrometer length scales. Transmission electron microscopy reveals both spinodal decomposition and nucleation and growth phenomena the relative magnitude of which varies with x. We show that the (Pb(0.95)Sn(0.05)Te)(1-x)(PbS)(x) system, despite its nanostructured nature, maintains a high electron mobility (>100 cm(2)/V x s at 700 K). At x approximately 0.08 the material achieves a very low room-temperature lattice thermal conductivity of approximately 0.4 W/m x K. This value is only 28% of the PbTe lattice thermal conductivity at room temperature. The inhibition of heat flow in this system is caused by nanostructure-induced acoustic impedance mismatch between the PbTe-rich and PbS-rich regions. As a result the thermoelectric properties of (Pb(0.95)Sn(0.05)Te)(1-x)(PbS)(x) at x = 0.04, 0.08, and 0.16 were found to be superior to those of PbTe by almost a factor of 2. The relative importance of the two observed modes of nanostructuring, spinodal decomposition and nucleation and growth, in suppressing the thermal conductivity was assessed in this work, and we can conclude that the latter mode seems more effective in doing so. The promise of such a system for high efficiency is highlighted by a ZT approximately 1.50 at 642 K for x approximately 0.08.