RESUMEN
Multiple Myeloma (MM) is an emerging ailment of global concern. Its diagnosis at the early stages is critical for recovery. Therefore, efforts are underway to produce digital pathology tools with human-level intelligence that are efficient, scalable, accessible, and cost-effective. Following the trend, a medical imaging challenge on "Segmentation of Multiple Myeloma Plasma Cells in Microscopic Images (SegPC-2021)" was organized at the IEEE International Symposium on Biomedical Imaging (ISBI), 2021, France. The challenge addressed the problem of cell segmentation in microscopic images captured from the slides prepared from the bone marrow aspirate of patients diagnosed with Multiple Myeloma. The challenge released a total of 775 images with 690 and 85 images of sizes 2040×1536 and 1920×2560 pixels, respectively, captured from two different (microscope and camera) setups. The participants had to segment the plasma cells with a separate label on each cell's nucleus and cytoplasm. This problem comprises many challenges, including a reduced color contrast between the cytoplasm and the background, and the clustering of cells with a feeble boundary separation of individual cells. To our knowledge, the SegPC-2021 challenge dataset is the largest publicly available annotated data on plasma cell segmentation in MM so far. The challenge targets a semi-automated tool to ensure the supervision of medical experts. It was conducted for a span of five months, from November 2020 to April 2021. Initially, the data was shared with 696 people from 52 teams, of which 41 teams submitted the results of their models on the evaluation portal in the validation phase. Similarly, 20 teams qualified for the last round, of which 16 teams submitted the results in the final test phase. All the top-5 teams employed DL-based approaches, and the best mIoU obtained on the final test set of 277 microscopic images was 0.9389. All these five models have been analyzed and discussed in detail. This challenge task is a step towards the target of creating an automated MM diagnostic tool.
Asunto(s)
Mieloma Múltiple , Células Plasmáticas , Humanos , Mieloma Múltiple/diagnóstico por imagenRESUMEN
This work introduces a novel, joint reconstruction of vascular structure and microvascular function maps directly from highly undersampled data in k - t space using vascular heterogeneity priors for high-definition, dynamic contrast-enhanced (DCE) MRI. In DCE MRI, arteries and veins are characterized by rapid, high uptake and wash-out of contrast agents (CA). On the other hand, depending on CA uptake and wash-out signal patterns, capillary tissues can be categorized into highly perfused, moderately perfused, and necrotic regions. Given the above considerations, macrovascular maps are generated as a prior to differentiate penalties on arteries relative to capillary tissues during image reconstruction. Furthermore, as a microvascular prior, contrast dynamics in capillary regions are represented in a low dimensional space using a finite number of basic vectors that reflect actual tissue-specific signal patterns. Both vascular structure and microvascular function maps are jointly estimated by solving a constrained optimization problem in which the above vascular heterogeneity priors are represented by spatially weighted nonnegative matrix factorization. Retrospective and prospective experiments are performed to validate the effectiveness of the proposed method in generating well-defined vascular structure and microvascular function maps for patients with brain tumor at high reduction factors.
Asunto(s)
Neoplasias Encefálicas , Imagen por Resonancia Magnética , Algoritmos , Medios de Contraste , Humanos , Estudios Prospectivos , Estudios RetrospectivosRESUMEN
Temporal and spatial resolution of dynamic contrast-enhanced MR imaging (DCE-MRI) is critical to reproducibility, and the reproducibility of high-resolution (HR) DCE-MRI was evaluated. Thirty consecutive patients suspected to have brain tumors were prospectively enrolled with written informed consent. All patients underwent both HR-DCE (voxel size, 1.1 × 1.1 × 1.1 mm3; scan interval, 1.6 s) and conventional DCE (C-DCE; voxel size, 1.25 × 1.25 × 3.0 mm3; scan interval, 4.0 s) MRI. Regions of interests (ROIs) for enhancing lesions were segmented twice in each patient with glioblastoma (n = 7) to calculate DCE parameters (Ktrans, Vp, and Ve). Intraclass correlation coefficients (ICCs) of DCE parameters were obtained. In patients with gliomas (n = 25), arterial input functions (AIFs) and DCE parameters derived from T2 hyperintense lesions were obtained, and DCE parameters were compared according to WHO grades. ICCs of HR-DCE parameters were good to excellent (0.84-0.95), and ICCs of C-DCE parameters were moderate to excellent (0.66-0.96). Maximal signal intensity and wash-in slope of AIFs from HR-DCE MRI were significantly greater than those from C-DCE MRI (31.85 vs. 7.09 and 2.14 vs. 0.63; p < 0.001). Both 95th percentile Ktrans and Ve from HR-DCE and C-DCE MRI could differentiate grade 4 from grade 2 and 3 gliomas (p < 0.05). In conclusion, HR-DCE parameters generally showed better reproducibility than C-DCE parameters, and HR-DCE MRI provided better quality of AIFs.
Asunto(s)
Neoplasias Encefálicas/diagnóstico por imagen , Glioma/diagnóstico por imagen , Imagen por Resonancia Magnética/métodos , Adulto , Medios de Contraste/análisis , Femenino , Humanos , Aumento de la Imagen/métodos , Masculino , Persona de Mediana Edad , Estudios Prospectivos , Reproducibilidad de los ResultadosRESUMEN
Mesh transparent conducting electrodes (TCEs) have been successfully employed to Cu(In,Ga)Se2 (CIGS) solar cells (Lee et al., 2018; Jang et al., 2017; Lee et al., 2020) [1-3]. Lateral motion of charge carriers is necessarily required for the carriers to be collected in CIGS solar cell cells having mesh TCEs. Lateral collection length of carriers can be obtain based on the lateral photocurrent values measured in custom designed CIGS test structures, which in turn enables to determine an optimum design of mesh TCEs for these CIGS solar cells (Lee et al., 2019) [4]. In a standard CIGS solar cell, a CdS layer is required to be fully cover the CIGS whole surface. However, it is not the case for mesh TCE based CIGS solar cells (Chung, 2019) [5]. The presence or absence of the CdS layer on the CIGS/Mo planar stack alters the traveling path of the charge carriers, which in turn will affect the lateral photocurrent values. Therefore, it will be helpful to know the effect of the presence or absence of the CdS layer on the lateral photocurrents in mesh TCE based CIGS solar cells.
RESUMEN
This article provides data on the scanning tunnelling microscopy (STM), atomic force microscopy (AFM) and Kelvin probe force microscopy (KPFM) images of InAs(001) surface. Using the frequency-modulation (FM) method in AFM and KPFM, atomic resolution topography and contact potential difference (CPD) images of InAs(001) surface were obtained. The InAs(001) surface reconstruction images observed by STM and AFM are compared. The effect of AFM tip condition and tip-sample distance to AFM and KPFM imaging is verified by measuring frequency shift vs. tip-sample distance spectroscopy. This data article is related to the article entitled, "Kelvin prove force microscopy and its application" (Melitz et al., 2011) [1].
RESUMEN
Silver nanowire (AgNW) networks have demonstrated high optical and electrical properties, even better than those of indium tin oxide thin films, and are expected to be a next-generation transparent conducting electrode (TCE). Enhanced electrical and optical properties are achieved when the diameter of the AgNWs in the network is fairly small, that is, typically less than 30 nm. However, when AgNWs with such small diameters are used in the network, stability issues arise. One method to resolve the stability issues is to increase the diameter of the AgNWs, but the use of AgNWs with large diameters has the disadvantage of causing a rough surface morphology. In this work, we resolve all of the aforementioned issues with AgNW TCEs by the electrodeposition of Ag onto as-spin-coated thin AgNW TCEs. The electrodeposition of Ag offers many advantages, including the precise adjustment of the AgNW diameter and wire-to-wire welding to improve the junction conductance while minimizing the increase in protrusion height because of the overlap of AgNWs upon increasing the diameter. In addition, Ag electrodeposition on AgNW TCEs can provide higher conductance than that of as-spin-coated AgNW TCEs at the same transparency because of the reduced junction resistance, which generates a superior figure of merit. We applied the electrodeposited (ED) AgNW network to a Cu(In,Ga)Se2 thin-film solar cell and compared the device performance to a device with a standard sputtered transparent conducting oxide (TCO). The cell fabricated by the electrodeposition method showed nearly equal performance to that of a cell with the sputtered TCO. We expect that ED AgNW networks can be used as high-performance and robust TCEs for various optoelectronic applications.
RESUMEN
This work introduces a model-based, high-definition dynamic contrast enhanced (DCE) MRI for concurrent estimation of perfusion and microvascular permeability over the whole brain. A time series of reference-subtracted signals is decomposed into one component that reflects main contrast dynamics and the other one that includes residual contrast agents (CA) and background signals. The former is described by linear superposition of a finite number of basic vectors trained from an augmented set of data that consists of tracer-kinetic model driven signal vectors and patient-specific measured ones. Contrast dynamics is estimated by solving a constrained optimization problem that incorporates the linearized signal decomposition into the measurement model of DCE MRI and then combining the main component with the background-suppressed, residual CA signals. To the best of our knowledge, this is the first work that prospectively enables rapid temporal sampling with 1.5â¯s (3â¯â¼â¯4 times higher than clinical routines) while simultaneously achieving high isotropic spatial resolution with 1.0â¯mm3 (4â¯â¼â¯6 times higher than routines), enhancing estimation of both patient-specific inputs and outputs for quantification of microvascular functions. Simulations and experiments are performed to demonstrate the effectiveness of the proposed method in patients with brain cancer.
Asunto(s)
Neoplasias Encefálicas/diagnóstico por imagen , Encéfalo/irrigación sanguínea , Permeabilidad Capilar , Medios de Contraste , Aumento de la Imagen/métodos , Interpretación de Imagen Asistida por Computador/métodos , Imagen por Resonancia Magnética/métodos , Algoritmos , Humanos , Imagenología Tridimensional , Estudios ProspectivosRESUMEN
PURPOSE: The goal of nutritional support for very-low-birth-weight (VLBW) infants from birth to term is to match the in utero growth rates; however, this is rarely achieved. METHODS: We evaluated postdischarge growth patterns and growth failure in 81 Korean VLBW infants through a retrospective study. Weight and height were measured and calculated based on age percentile distribution every 3 months until age 24 months. Growth failure was defined as weight and height below the 10th percentile at 24 months. For the subgroup analysis, small-for-gestational age (SGA) and extremely low birth weight (ELBW) infants were evaluated. The growth patterns based on the Korean, World Health Organization (WHO), or Centers for Disease Control and Prevention (CDC) standard were serially compared over time. RESULTS: At postconception age (PCA) 40 weeks, 47 (58%) and 45 infants (55%) showed growth failure in terms of weight and height, respectively. At PCA 24 months, 20 infants (24%) showed growth failure for weight and 14 (18%) for height. Growth failure rates were higher for the SGA infants than for the appropriate-weight-for-gestational age infants at PCA 24 months (P=0.045 for weight and P=0.038 for height). Growth failure rates were higher for the ELBW infants than for the non-ELBW infants at PCA 24 months (P<0.001 for weight and P=0.003 for height). Significant differences were found among the WHO, CDC, and Korean standards (P<0.001). CONCLUSION: Advancements in neonatal care have improved the catch-up growth of VLBW infants, but this is insufficient. Careful observation and aggressive interventions, especially in SGA and ELBW infants, are needed.
RESUMEN
Novel thermosensitive polyion complex (PIC) micelles were prepared in an aqueous medium based on the complexation of a pair of oppositely charged block ionomers, poly(2-isopropyl-2-oxazoline)-b-poly(amino acid)s (PiPrOx-b-PAA), containing thermosensitive PiPrOx segments. The controlled synthesis of PiPrOx-b-PAA was achieved via the ring-opening anionic polymerization of N-carboxyanhydrides (NCA) of either eta-benzyloxycarbonyl-l-lysine (Lys(Z)-NCA) or beta-benzyl-l-aspartate (BLA-NCA) with omega-amino-functionalized PiPrOx macroinitiators and the subsequent deprotection reaction under acidic or basic conditions. Gel permeation chromatography (GPC) and 1H NMR spectroscopy revealed that the syntheses of two block ionomers, poly(2-isopropyl-2-oxazoline)-b-poly(l-lysine) [PiPrOx-P(Lys)] and poly(2-isopropyl-2-oxazoline)-b-poly(aspartic acid) [PiPrOx-P(Asp)], proceeded almost quantitatively to give samples with a narrow molecular weight distribution (Mw/Mn = 1.2). The mixing of these two oppositely charged block ionomers in an aqueous medium led to the spontaneous formation of PIC micelles, which was confirmed by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The PIC micelles were spherical particles with a narrow distribution in the range of the measured concentration (0.125-1 mg/mL) and were stable without any secondary aggregates. Furthermore, the PIC micelles had a constant cloud-point temperature (Tcp) of approximately 32 degrees C under physiological conditions regardless of the total concentration, suggesting that the concentration factor is almost negligible with respect to the Tcp of the micelles presumably because of the increased local concentration of the PiPrOx segments in the shell layer. These PIC micelles have a promising application as a size-regulated smart nanocontainer loading charged compounds as well as bearing a thermosensitive outer shell that is useful for physical affinity control.