Quantifying mechanical forces during vertebrate morphogenesis.

Morphogenesis requires embryonic cells to generate forces and perform mechanical work to shape their tissues. Incorrect functioning of these force fields can lead to congenital malformations. Understanding these dynamic processes requires the quantification and profiling of three-dimensional mechanics during evolving vertebrate morphogenesis. Here we describe elastic spring-like force sensors with micrometre-level resolution, fabricated by intravital three-dimensional bioprinting directly in the closing neural tubes of growing chicken embryos. Integration of calibrated sensor read-outs with computational mechanical modelling allows direct quantification of the forces and work performed by the embryonic tissues. As they displace towards the embryonic midline, the two halves of the closing neural tube reach a compression of over a hundred nano-newtons during neural fold apposition. Pharmacological inhibition of Rho-associated kinase to decrease the pro-closure force shows the existence of active anti-closure forces, which progressively widen the neural tube and must be overcome to achieve neural tube closure. Overall, our approach and findings highlight the intricate interplay between mechanical forces and tissue morphogenesis.

The role of the extracellular matrix in the reduction of lateral force transmission in muscle bundles: A finite element analysis.

BACKGROUND AND OBJECTIVE: Aging is associated with a reduction in muscle performance, but muscle weakness is characterized by a much greater loss of force loss compared to mass loss. The aim of this work is to assess the contribution of the extracellular matrix (ECM) to the lateral transmission of force in humans and the loss of transmitted force due to age-related modifications. METHODS: Finite element models of muscle bundles are developed for young and elderly human subjects, by considering a few fibers connected through an ECM layer. Bundles of young and elderly subjects are assumed to differ in terms of ECM thickness, as observed experimentally. A three-element-based Hill model is adopted to describe the active behavior of muscle fibers, while the ECM is modeled assuming an isotropic hyperelastic neo-Hookean constitutive formulation. Numerical analyses are carried out by mimicking, at the scale of a bundle, two experimental protocols from the literature. RESULTS: When comparing numerical results obtained for bundles of young and elderly subjects, a greater reduction in the total transmitted force is observed in the latter. The loss of transmitted force is 22 % for the elderly subjects, while it is limited to 7.5 % for the young subjects. The result for the elderly subjects is in line with literature studies on animal models, showing a reduction in the range of 20-34 %. This can be explained by an alteration in the mechanism of lateral force transmission due to the lower shear stiffness of the ECM in elderly subjects, related to its higher thickness. CONCLUSIONS: Computational modeling allows to evaluate at the bundle level how the age-related increase of the ECM amount between fibers affects the lateral transmission of force. The results suggest that the observed increase in ECM thickness in aging alone can explain the reduction of the total transmitted force, due to the impaired lateral transmission of force of each fiber.

Three-Dimensional Bioprinting of Naturally Derived Hydrogels for the Production of Biomimetic Living Tissues: Benefits and Challenges.

Three-dimensional bioprinting is the process of manipulating cell-laden bioinks to fabricate living structures. Three-dimensional bioprinting techniques have brought considerable innovation in biomedicine, especially in the field of tissue engineering, allowing the production of 3D organ and tissue models for in vivo transplantation purposes or for in-depth and precise in vitro analyses. Naturally derived hydrogels, especially those obtained from the decellularization of biological tissues, are promising bioinks for 3D printing purposes, as they present the best biocompatibility characteristics. Despite this, many natural hydrogels do not possess the necessary mechanical properties to allow a simple and immediate application in the 3D printing process. In this review, we focus on the bioactive and mechanical characteristics that natural hydrogels may possess to allow efficient production of organs and tissues for biomedical applications, emphasizing the reinforcement techniques to improve their biomechanical properties.

Development and In Vitro/In Vivo Comparative Characterization of Cryopreserved and Decellularized Tracheal Grafts.

Tracheal reconstruction represents a challenge when primary anastomosis is not feasible. Within this scenario, the study aim was to develop a new pig-derived decellularized trachea (DecellT) to be compared with the cryopreserved counterpart (CryoT) for a close predictive analysis. Tracheal segments underwent decellularization by a physical + enzymatic + chemical method (12 cycles); in parallel, cryopreserved samples were also prepared. Once decellularized (histology/DNA quantification), the two groups were characterized for Alpha-Gal epitopes/structural proteins (immunohistochemistry/histology/biochemical assays/second harmonic generation microscopy)/ultrastructure (Scanning Electron Microscopy (SEM))/mechanical behaviour. Cytotoxicity absence was assessed in vitro (extract-test assay/direct seeding, HM1SV40 cell line) while biocompatibility was verified in BALB/c mice, followed by histological/immunohistochemical analyses and SEM (14 days). Decellularization effectively removed Alpha-Gal epitopes; cartilage histoarchitecture was retained in both groups, showing chondrocytes only in the CryoT. Cryopreservation maintained few respiratory epithelium sparse cilia, not detectable in DecellT. Focusing on ECM, preserved structural/ultrastructural organization and collagen content were observed in the cartilage of both; conversely, the GAGs were significantly reduced in DecellT, as confirmed by mechanical study results. No cytotoxicity was highlighted by CryoT/DecellT in vitro, as they were also corroborated by a biocompatibility assay. Despite some limitations (cells presence/GAGs reduction), CryoT/DecellT are both appealing options, which warrant further investigation in comparative in vivo studies.

Compressive Mechanical Behavior of Partially Oxidized Polyvinyl Alcohol Hydrogels for Cartilage Tissue Repair.

Polyvinyl alcohol (PVA) hydrogels are extensively used as scaffolds for tissue engineering, although their biodegradation properties have not been optimized yet. To overcome this limitation, partially oxidized PVA has been developed by means of different oxidizing agents, obtaining scaffolds with improved biodegradability. The oxidation reaction also allows tuning the mechanical properties, which are essential for effective use in vivo. In this work, the compressive mechanical behavior of native and partially oxidized PVA hydrogels is investigated, to evaluate the effect of different oxidizing agents, i.e., potassium permanganate, bromine, and iodine. For this purpose, PVA hydrogels are tested by means of indentation tests, also considering the time-dependent mechanical response. Indentation results show that the oxidation reduces the compressive stiffness from about 2.3 N/mm for native PVA to 1.1 ÷ 1.4 N/mm for oxidized PVA. During the consolidation, PVA hydrogels exhibit a force reduction of about 40% and this behavior is unaffected by the oxidizing treatment. A poroviscoelastic constitutive model is developed to describe the time-dependent mechanical response, accounting for the viscoelastic polymer matrix properties and the flow of water molecules within the matrix during long-term compression. This model allows to estimate the long-term Young's modulus of PVA hydrogels in drained conditions (66 kPa for native PVA and 34-42 kPa for oxidized PVA) and can be exploited to evaluate their performances under compressive stress in vivo, as in the case of cartilage tissue engineering.

Development of detailed finite element models for in silico analyses of brain impact dynamics.

BACKGROUND AND OBJECTIVE: In the last few decades, several studies have been performed to investigate traumatic brain injuries (TBIs) and to understand the biomechanical response of brain tissues, by using experimental and computational approaches. As part of computational approaches, human head finite element (FE) models show to be important tools in the analysis of TBIs, making it possible to estimate local mechanical effects on brain tissue for different accident scenarios. The present study aims to contribute to the computational approach by means of the development of three advanced FE head models for accurately describing the head tissue dynamics, the first step to predict TBIs. METHODS: We have developed three detailed FE models of human heads from magnetic resonance images of three volunteers: an adult female (32 yrs), an adult male (35 yrs), and a young male (16 yrs). These models have been validated against experimental data of post mortem human subjects (PMHS) tests available in the literature. Brain tissue displacements relative to the skull, hydrostatic intracranial pressure, and head acceleration have been used as the parameters to compare the model response with the experimental response for validation. The software CORAplus (CORrelation and Analysis) has been adopted to evaluate the bio-fidelity level of FE models. RESULTS: Numerical results from the three models agree with experimental data. FE models presented in this study show a good bio-fidelity for hydrostatic pressure (CORA score of 0.776) and a fair bio-fidelity brain tissue displacements relative to the skull (CORA score of 0.443 and 0.535). The comparison among numerical simulations carried out with the three models shows negligible differences in the mechanical state of brain tissue due to the different morphometry of the heads, when the same acceleration history is considered. CONCLUSIONS: The three FE models, thanks to their accurate description of anatomical morphology and to their bio-fidelity, can be useful tools to investigate brain mechanics due to different impact scenarios. Therefore, they can be used for different purposes, such as the investigation of the correlation between head acceleration and tissue damage, or the effectiveness of helmet designs. This work does not address the issue to define injury thresholds for the proposed models.

Mechanical and Structural Adaptation of the Pulmonary Root after Ross Operation in a Murine Model.

Background: The major limitation to the Ross operation is a progressive autograft dilation, possibly leading to reoperations. A murine model was created to evaluate pulmonary artery graft (PAG) adaptation to pressure overload. Methods: Lewis rats (n = 17) underwent heterotopic surgical implantation of a PAG, harvested from syngeneic animals (n = 17). A group of sham animals (n = 7) was used as a control. Seriated ultrasound studies of the PAG were performed. Animals were sacrificed at 1 week (n = 5) or 2 months (n = 15) and the PAG underwent mechanical and histopathological analyses. Results: Echography showed an initial increase in diameter (p < 0.001) and a decrease in peak systolic velocity (PSV). Subsequently, despite no change in diameter, an increase in PSV was observed (p < 0.01). After 1 week, the stiffness of the PAG and the aorta were similar, while at 2 months, the PAG appeared more rigid (p < 0.05). PAG's histological analysis at 2 months revealed intimal hyperplasia development. The tunica media showed focal thinning of the elastic lamellae and normally distributed smooth muscle cells. Conclusions: We demonstrated a stiffening of the PAG wall after its implantation in systemic position; the development of intimal hyperplasia and the thinning of the elastic lamellae could be the possible underlying mechanism.

Preclinical Development of Bioengineered Allografts Derived from Decellularized Human Diaphragm.

Volumetric muscle loss (VML) is the traumatic/surgical loss of skeletal muscle, causing aesthetic damage and functional impairment. Suboptimal current surgical treatments are driving research towards the development of optimised regenerative therapies. The grafting of bioengineered scaffolds derived from decellularized skeletal muscle may be a valid option to promote structural and functional healing. In this work, a cellular human diaphragm was considered as a scaffold material for VML treatment. Decellularization occurred through four detergent-enzymatic protocols involving (1) sodium dodecyl sulfate (SDS), (2) SDS + TergitolTM, (3) sodium deoxycholate, and (4) TergitolTM. After decellularization, cells, DNA (≤50 ng/mg of tissue), and muscle fibres were efficiently removed, with the preservation of collagen/elastin and 60%-70% of the glycosaminoglycan component. The detergent-enzymatic treatments did not affect the expression of specific extracellular matrix markers (Collagen I and IV, Laminin), while causing the loss of HLA-DR expression to produce non-immunogenic grafts. Adipose-derived stem cells grown by indirect co-culture with decellularized samples maintained 80%-90% viability, demonstrating the biosafety of the scaffolds. Overall, the tested protocols were quite equivalent, with the patches treated by SDS + TergitolTM showing better collagen preservation. After subcutaneous implant in Balb/c mice, these acellular diaphragmatic grafts did not elicit a severe immune reaction, integrating with the host tissue.

Customized bioreactor enables the production of 3D diaphragmatic constructs influencing matrix remodeling and fibroblast overgrowth.

The production of skeletal muscle constructs useful for replacing large defects in vivo, such as in congenital diaphragmatic hernia (CDH), is still considered a challenge. The standard application of prosthetic material presents major limitations, such as hernia recurrences in a remarkable number of CDH patients. With this work, we developed a tissue engineering approach based on decellularized diaphragmatic muscle and human cells for the in vitro generation of diaphragmatic-like tissues as a proof-of-concept of a new option for the surgical treatment of large diaphragm defects. A customized bioreactor for diaphragmatic muscle was designed to control mechanical stimulation and promote radial stretching during the construct engineering. In vitro tests demonstrated that both ECM remodeling and fibroblast overgrowth were positively influenced by the bioreactor culture. Mechanically stimulated constructs also increased tissue maturation, with the formation of new oriented and aligned muscle fibers. Moreover, after in vivo orthotopic implantation in a surgical CDH mouse model, mechanically stimulated muscles maintained the presence of human cells within myofibers and hernia recurrence did not occur, suggesting the value of this approach for treating diaphragm defects.

Time-dependent mechanical behavior of partially oxidized polyvinyl alcohol hydrogels for tissue engineering.

Polyvinyl alcohol (PVA) hydrogels are synthetic polymers which can be used as scaffolds for tissue engineering due to their biocompatibility and large water content. To improve their biodegradation properties, partial oxidation of PVA is achieved by means of different oxidizing agents, such as potassium permanganate, bromine and iodine. The effect of this process on hydrogels mechanical performance has not been fully investigated in view of tissue engineering applications. In this work, the time-dependent mechanical behavior of unmodified and partially oxidized PVA hydrogels is evaluated by means of uniaxial tensile and stress relaxation tests, to evaluate the effect of different oxidizing agents on the viscoelastic response. Tensile tests show an isotropic and almost-incompressible behavior, with a stiffness reduction after PVA oxidation. The time-dependent response of oxidized PVA is comparable to the one of unmodified PVA and is modeled as a quasi-linear viscoelastic behavior. Finite Element (FE) models of PVA samples are developed and numerical analyses are used to evaluate the effect of different strain rates on the mechanical response under uniaxial tension. This model can be exploited to predict the time-dependent mechanical behavior of partially oxidized PVA in tissue engineering application under tensile loading.

Mechanical behaviour of healthy versus alkali-lesioned corneas by a porcine organ culture model.

BACKGROUND: Cornea is a composite tissue exhibiting nonlinear and time-dependent mechanical properties. Corneal ulcers are one of the main pathologies that affect this tissue, disrupting its structural integrity and leading to impaired functions. In this study, uniaxial tensile and stress-relaxation tests are developed to evaluate stress-strain and time-dependent mechanical behaviour of porcine corneas. RESULTS: The samples are split in two groups: some corneas are analysed in an unaltered state (healthy samples), while others are injured with alkaline solution to create an experimental ulcer (lesioned samples). Furthermore, within each group, corneas are examined in two conditions: few hours after the enucleation (fresh samples) or after 7 days in a specific culture medium for the tissue (cultured samples). Finally, another condition is added: corneas from all the groups undergo or not a cross-linking treatment. In both stress-strain and stress-relaxation tests, a weakening of the tissue is observed due to the imposed conditions (lesion, culture and treatment), represented by a lower stiffness and increased stress-relaxation. CONCLUSIONS: Alkali-induced corneal stromal melting determines changes in the mechanical response that can be related to a damage at microstructural level. The results of the present study represent the basis for the investigation of traditional and innovative corneal therapies.

Muscle in Variable Gravity: "I Do Not Know Where I Am, But I Know What to Do".

Purpose: Fascicle and sarcomere lengths are important predictors of muscle mechanical performance. However, their regulation during stretch-shortening cycle (SSC) activities in usual and challenging conditions is poorly understood. In this study, we aimed to investigate muscle fascicle and sarcomere behavior during drop jumps (a common SSC activity) in conditions of variable gravity. Methods: Fifteen volunteers performed repeated drop jumps in 1 g, hypo-gravity (0 to 1 g), and hyper-gravity (1 to 2 g) during a parabolic flight. Gastrocnemius medialis (GM) electromyographic activity and fascicle length (Lf) were measured at drop-off, ground contact (GC), minimum ankle joint angle (MAJ), and push-off. GM sarcomere number was estimated by dividing Lf, measured by ultrasound at rest, by published data on GM sarcomere length, and measured in vivo at the same joint angle. Changes in sarcomere length were estimated by dividing GM Lf in each jump phase by sarcomere number calculated individually. The sarcomere force-generating capacity in each jump phase was estimated from the sarcomere length-tension relationship previously reported in the literature. Results: The results showed that, regardless of the gravity level, GM sarcomeres operated in the ascending portion of their length-tension relationship in all the jump phases. Interestingly, although in hypo-gravity and hyper-gravity during the braking phase (GC-MAJ) GM fascicles and sarcomeres experienced a stretch (as opposed to the quasi-isometric behavior in 1 g), at MAJ they reached similar lengths as in 1 g, allowing sarcomeres to develop about the 70% of their maximum force. Conclusion: The observed fascicle behavior during drop jumping seems useful for anchoring the tendon, enabling storage of elastic energy and its release in the subsequent push-off phase for effectively re-bouncing in all gravity levels, suggesting that an innate neuromuscular wisdom enables to perform SSC movements also in challenging conditions.

Porcine Decellularized Diaphragm Hydrogel: A New Option for Skeletal Muscle Malformations.

Hydrogels are biomaterials that, thanks to their unique hydrophilic and biomimetic characteristics, are used to support cell growth and attachment and promote tissue regeneration. The use of decellularized extracellular matrix (dECM) from different tissues or organs significantly demonstrated to be far superior to other types of hydrogel since it recapitulates the native tissue's ECM composition and bioactivity. Different muscle injuries and malformations require the application of patches or fillers to replenish the defect and boost tissue regeneration. Herein, we develop, produce, and characterize a porcine diaphragmatic dECM-derived hydrogel for diaphragmatic applications. We obtain a tissue-specific biomaterial able to mimic the complex structure of skeletal muscle ECM; we characterize hydrogel properties in terms of biomechanical properties, biocompatibility, and adaptability for in vivo applications. Lastly, we demonstrate that dECM-derived hydrogel obtained from porcine diaphragms can represent a useful biological product for diaphragmatic muscle defect repair when used as relevant acellular stand-alone patch.

Biomechanics of stomach tissues and structure in patients with obesity.

Even though bariatric surgery is one of the most effective treatment option of obesity, post-surgical weight loss is not always ensured, especially in the long term, when many patients experience weight regain. Bariatric procedures are largely based on surgeon's expertise and intra-operative decisions, while an integrated in-silico approach could support surgical activity. The effects of bariatric surgery on gastric distension, which activates the neural circuitry promoting satiety, can be considered one of the main factors in the operation success. This aspect can be investigated trough computational modelling based on the mechanical properties of stomach tissues and structure. Mechanical tests on gastric tissues and structure from people with obesity are carried out, as basis for the development of a computational model. The samples are obtained from stomach residuals explanted during laparoscopic sleeve gastrectomy interventions. Uniaxial tensile and stress relaxation tests are performed in different directions and inflation tests are carried out on the entire stomach residual. Experimental results show anisotropic, non-linear elastic and time-dependent behavior. In addition, the mechanical properties demonstrate to be dependent on the sample location within the stomach. Inflation tests confirm the characteristics of time-dependence and non-linear elasticity of the stomach wall. Experimental activities developed provide a unique set of data about the mechanical behavior of the stomach of patients with obesity, considering both tissues and structure. This data set can be adopted for the development of computational models of the stomach, as support to the rational investigation of biomechanical aspects of bariatric surgery.

Conformation and mechanics of the polymeric cuff of artificial urinary sphincter.

The surgical treatment of urinary incontinence is often performed by adopting an Artificial Urinary Sphincter (AUS). AUS cuff represents a fundamental component of the device, providing the mechanical action addressed to urethral occlusion, which can be investigated by computational approach. In this work, AUS cuff is studied with reference to both materials and structure, to develop a finite element model. Materials behavior is investigated using physicochemical and mechanical characterization, leading to the formulation of a constitutive model. Materials analysis shows that AUS cuff is composed by a silicone blister joined with a PET fiber-reinforced layer. A nonlinear mechanical behavior is found, with a higher stiffness in the outer layer due to fiber-reinforcement. The cuff conformation is acquired by Computer Tomography (CT) both in deflated and inflated conditions, for an accurate definition of the geometrical characteristics. Based on these data, the numerical model of AUS cuff is defined. CT images of the inflated cuff are compared with results of numerical analysis of the inflation process, for model validation. A relative error below 2.5% was found. This study is the first step for the comprehension of AUS mechanical behavior and allows the development of computational tools for the analysis of lumen occlusion process. The proposed approach could be adapted to further fluid-filled cuffs of artificial sphincters.

Alterations of Extracellular Matrix Mechanical Properties Contribute to Age-Related Functional Impairment of Human Skeletal Muscles.

Aging of human skeletal muscles is associated with increased passive stiffness, but it is still debated whether muscle fibers or extracellular matrix (ECM) are the determinants of such change. To answer this question, we compared the passive stress generated by elongation of fibers alone and arranged in small bundles in young healthy (Y: 21 years) and elderly (E: 67 years) subjects. The physiological range of sarcomere length (SL) 2.5-3.3 µm was explored. The area of ECM between muscle fibers was determined on transversal sections with picrosirius red, a staining specific for collagen fibers. The passive tension of fiber bundles was significantly higher in E compared to Y at all SL. However, the resistance to elongation of fibers alone was not different between the two groups, while the ECM contribution was significantly increased in E compared to Y. The proportion of muscle area occupied by ECM increased from 3.3% in Y to 8.2% in E. When the contribution of ECM to bundle tension was normalized to the fraction of area occupied by ECM, the difference disappeared. We conclude that, in human skeletal muscles, the age-related reduced compliance is due to an increased stiffness of ECM, mainly caused by collagen accumulation.

Extracellular Matrix-Derived Hydrogels as Biomaterial for Different Skeletal Muscle Tissue Replacements.

Recently, skeletal muscle represents a complex and challenging tissue to be generated in vitro for tissue engineering purposes. Several attempts have been pursued to develop hydrogels with different formulations resembling in vitro the characteristics of skeletal muscle tissue in vivo. This review article describes how different types of cell-laden hydrogels recapitulate the multiple interactions occurring between extracellular matrix (ECM) and muscle cells. A special attention is focused on the biochemical cues that affect myocytes morphology, adhesion, proliferation, and phenotype maintenance, underlining the importance of topographical cues exerted on the hydrogels to guide cellular orientation and facilitate myogenic differentiation and maturation. Moreover, we highlight the crucial role of 3D printing and bioreactors as useful platforms to finely control spatial deposition of cells into ECM based hydrogels and provide the skeletal muscle native-like tissue microenvironment, respectively.

Recellularized Colorectal Cancer Patient-derived Scaffolds as in vitro Pre-clinical 3D Model for Drug Screening.

Colorectal cancer (CRC) shows highly ineffective therapeutic management. An urgent unmet need is the random assignment to adjuvant chemotherapy of high-risk stage II and stage III CRC patients without any predictive factor of efficacy. In the field of drug discovery, a critical step is the preclinical evaluation of drug cytotoxicity, efficacy, and efficiency. We proposed a patient-derived 3D preclinical model for drug evaluation that could mimic in vitro the patient's disease. Surgically resected CRC tissue and adjacent healthy colon mucosa were decellularized by a detergent-enzymatic treatment. Scaffolds were recellularized with HT29 and HCT116 cells. Qualitative and quantitative characterization of matched recellularized samples were evaluated through histology, immunofluorescences, scanning electron microscopy, and DNA amount quantification. A chemosensitivity test was performed using an increasing concentration of 5-fluorouracil (5FU). In vivo studies were carried out using zebrafish (Danio rerio) animal model. Permeability test and drug absorption were also determined. The decellularization protocol allowed the preservation of the original structure and ultrastructure. Five days after recellularization with HT29 and HCT116 cell lines, the 3D CRC model exhibited reduced sensitivity to 5FU treatments compared with conventional 2D cultures. Calculated the half maximal inhibitory concentration (IC50) for HT29 treated with 5FU resulted in 11.5 µM in 3D and 1.3 µM in 2D, and for HCT116, 9.87 µM in 3D and 1.7 µM in 2D. In xenograft experiments, HT29 extravasation was detected after 4 days post-injection, and we obtained a 5FU IC50 fully comparable to that observed in the 3D CRC model. Using confocal microscopy, we demonstrated that the drug diffused through the repopulated 3D CRC scaffolds and co-localized with the cell nuclei. The bioengineered CRC 3D model could be a reliable preclinical patient-specific platform to bridge the gap between in vitro and in vivo drug testing assays and provide effective cancer treatment.

Numerical modelling of abdominal wall mechanics: The role of muscular contraction and intra-abdominal pressure.

The biomechanics of the abdominal wall depends on muscular activation, tissue mechanical behavior and Intra-Abdominal Pressure (IAP). In this work, a numerical model of a human abdomen is presented, based on abdominal wall geometry from medical images. Specific constitutive formulations describe tissues mechanical behavior. Connective tissues are modelled as hyperelastic fiber-reinforced materials, while muscular tissues are described by means of a three-element Hill's model. The abdominal cavity is represented by a volume region interacting with the abdominal wall. Numerical analyses are developed by applying a muscular contraction, inducing a volume reduction of the abdominal cavity and a simultaneous IAP increase. Numerical results of abdomen displacement at IAP corresponding to an abdominal crunch are compared with experimental results acquired via 3D laser scanning on a healthy subject. Numerical and experimental results are mutually consistent and show that muscular activation induces a raising in the region adjacent to linea alba along the posterior-anterior direction and a lowering along lateral-medial direction of the abdominal wall sides. The numerical model developed in this work allows a coherent representation of the abdominal wall mechanics.