Emissions of ultrafine particles from five types of candles during steady burn conditions.

Emissions from candles are of concern for indoor air quality. In this work, five different types of pillar candles were burned under steady burn conditions in a new laboratory scale system for repeatable and controlled comparison of candle emissions (temperature ~25°C, relative humidity ~13%, O2 >18%, air exchange rate 1.9 h-1 ). Burn rate, particle number concentrations, mass concentrations, and mode diameters varied between candle types. Based on the results, the burning period was divided in two phases: initial (0-1 h) and stable (1-6 h). Burn rates were in the range 4.4-7.3 and 4.7-7.1 g/h during initial and stable phase, respectively. Relative particle number emissions, mode diameters, and mass concentrations were higher during the initial phase compared to the stable phase for a majority of the candles. We hypothesize that this is due to elevated emissions of wick additives upon ignition of the candle together with a slightly higher burn rate in the initial phase. Experiments at higher relative humidity (~40%) gave similar results with a tendency toward larger particle sizes at the higher relative humidity. Chemical composition with respect to inorganic salts was similar in the emitted particles (dry conditions) compared to the candlewicks, but with variations between different candles.

Environmental safety during the administration of Pressurized IntraPeritoneal Aerosol Chemotherapy (PIPAC).

BACKGROUND: Pressurized IntraPeritoneal Aerosol Chemotherapy (PIPAC) is an innovative technique for intraperitoneal drug delivery. This study investigates the efficacy of the occupational health safety measures taken to prevent exposition of healthcare workers to the toxic chemotherapy aerosol. METHODS: Air samples were taken at the working place of the surgeon and of the anesthetist during 2 PIPAC procedures and analyzed for content of platinum by inductively coupled plasma mass spectrometry (ICP-MS). Airborne particles were quantified in real time. Biological monitoring was performed in two surgeons after 50 PIPAC by examining blood samples for possible traces of platinum. Analysis was performed by an independent company. RESULTS: Safety measures included tightly closed abdomen, operating room (OR), ventilation meeting requirements of ISO norm 14644-1 class 5, closed aerosol waste system and remote control of PIPAC administration. No traces of platinum were found in the air of the OR (detection limit of 0.0001 mg/filter). No specific rise in particle concentration was detected in the air during the PIPAC procedure, patient closure and removal of the sterile drapes. Blood samples of the surgeons showed no traces of platinum. CONCLUSIONS: After implementation of adequate safety measures, no signs of environmental contamination or biological exposure of the surgeons were detected during PIPAC.