RESUMEN
Activation of the extracellular signal-regulated kinase-2 (ERK2) by phosphorylation has been shown to involve changes in protein dynamics, as determined by hydrogen-deuterium exchange mass spectrometry (HDX-MS) and NMR relaxation dispersion measurements. These can be described by a global exchange between two conformational states of the active kinase, named 'L' and 'R,' where R is associated with a catalytically productive ATP-binding mode. An ATP-competitive ERK1/2 inhibitor, Vertex-11e, has properties of conformation selection for the R-state, revealing movements of the activation loop that are allosterically coupled to the kinase active site. However, the features of inhibitors important for R-state selection are unknown. Here, we survey a panel of ATP-competitive ERK inhibitors using HDX-MS and NMR and identify 14 new molecules with properties of R-state selection. They reveal effects propagated to distal regions in the P+1 and helix αF segments surrounding the activation loop, as well as helix αL16. Crystal structures of inhibitor complexes with ERK2 reveal systematic shifts in the Gly loop and helix αC, mediated by a Tyr-Tyr ring stacking interaction and the conserved Lys-Glu salt bridge. The findings suggest a model for the R-state involving small movements in the N-lobe that promote compactness within the kinase active site and alter mobility surrounding the activation loop. Such properties of conformation selection might be exploited to modulate the protein docking interface used by ERK substrates and effectors.
Asunto(s)
Adenosina Trifosfato , Dominio Catalítico , Fosforilación , Conformación ProteicaRESUMEN
Activation of the extracellular signal regulated kinase-2 (ERK2) by phosphorylation has been shown to involve changes in protein dynamics, as determined by hydrogen-deuterium exchange mass spectrometry (HDX-MS) and NMR relaxation dispersion measurements. These can be described by a global exchange between two conformational states of the active kinase, named "L" and "R", where R is associated with a catalytically productive ATP-binding mode. An ATP-competitive ERK1/2 inhibitor, Vertex-11e, has properties of conformation selection for the R-state, revealing movements of the activation loop that are allosterically coupled to the kinase active site. However, the features of inhibitors important for R-state selection are unknown. Here we survey a panel of ATP-competitive ERK inhibitors using HDX-MS and NMR and identify 14 new molecules with properties of R-state selection. They reveal effects propagated to distal regions in the P+1 and helix αF segments surrounding the activation loop, as well as helix αL16. Crystal structures of inhibitor complexes with ERK2 reveal systematic shifts in the Gly loop and helix αC, mediated by a Tyr-Tyr ring stacking interaction and the conserved Lys-Glu salt bridge. The findings suggest a model for the R-state involving small movements in the N-lobe that promote compactness within the kinase active site and alter mobility surrounding the activation loop. Such properties of conformation selection might be exploited to modulate the protein docking interface used by ERK substrates and effectors.
RESUMEN
Structural changes involved in protein kinase activation and ligand binding have been determined from a wealth of X-ray crystallographic evidence. Recent solution studies using NMR, EPR, HX-MS, and fluorescence techniques have deepened this understanding by highlighting the underlying energetics and dynamics of multistate conformational ensembles. This new research is showing how activation mechanisms and ligand binding alter the internal motions of kinases and enable allosteric coupling between distal regulatory regions and the active site.
Asunto(s)
Proteínas Quinasas , Dominio Catalítico , Cristalografía por Rayos XRESUMEN
Conformational selection by small molecules expands inhibitory possibilities for protein kinases. Nuclear magnetic resonance (NMR) measurements of the mitogen-activated protein (MAP) kinase ERK2 have shown that activation by dual phosphorylation induces global motions involving exchange between two states, L and R. We show that ERK inhibitors Vertex-11e and SCH772984 exploit the small energetic difference between L and R to shift the equilibrium in opposing directions. An X-ray structure of active 2P-ERK2 complexed with AMP-PNP reveals a shift in the Gly-rich loop along with domain closure to position the nucleotide in a more catalytically productive conformation relative to inactive 0P-ERK2:ATP. X-ray structures of 2P-ERK2 complexed with Vertex-11e or GDC-0994 recapitulate this closure, which is blocked in a complex with a SCH772984 analog. Thus, the LâR shift in 2P-ERK2 is associated with movements needed to form a competent active site. Solution measurements by hydrogen-exchange mass spectrometry (HX-MS) reveal distinct binding interactions for Vertex-11e, GDC-0994, and AMP-PNP with active vs. inactive ERK2, where the extent of HX protection correlates with R state formation. Furthermore, Vertex-11e and SCH772984 show opposite effects on HX near the activation loop. Consequently, these inhibitors differentially affect MAP kinase phosphatase activity toward 2P-ERK2. We conclude that global motions in ERK2 reflect conformational changes at the active site that promote productive nucleotide binding and couple with changes at the activation loop to allow control of dephosphorylation by conformationally selective inhibitors.
Asunto(s)
Quinasas MAP Reguladas por Señal Extracelular/antagonistas & inhibidores , Quinasas MAP Reguladas por Señal Extracelular/química , Inhibidores de Proteínas Quinasas/farmacología , Regulación Alostérica/efectos de los fármacos , Sitios de Unión , Biocatálisis , Dominio Catalítico , Cristalografía por Rayos X , Medición de Intercambio de Deuterio , Humanos , Espectrometría de Masas , Modelos Biológicos , Nucleótidos/química , Nucleótidos/metabolismo , Fosforilación/efectos de los fármacos , Estructura Secundaria de ProteínaRESUMEN
To explain the large, opposite effects of urea and glycine betaine (GB) on stability of folded proteins and protein complexes, we quantify and interpret preferential interactions of urea with 45 model compounds displaying protein functional groups and compare with a previous analysis of GB. This information is needed to use urea as a probe of coupled folding in protein processes and to tune molecular dynamics force fields. Preferential interactions between urea and model compounds relative to their interactions with water are determined by osmometry or solubility and dissected using a unique coarse-grained analysis to obtain interaction potentials quantifying the interaction of urea with each significant type of protein surface (aliphatic, aromatic hydrocarbon (C); polar and charged N and O). Microscopic local-bulk partition coefficients K(p) for the accumulation or exclusion of urea in the water of hydration of these surfaces relative to bulk water are obtained. K(p) values reveal that urea accumulates moderately at amide O and weakly at aliphatic C, whereas GB is excluded from both. These results provide both thermodynamic and molecular explanations for the opposite effects of urea and glycine betaine on protein stability, as well as deductions about strengths of amide NH--amide O and amide NH--amide N hydrogen bonds relative to hydrogen bonds to water. Interestingly, urea, like GB, is moderately accumulated at aromatic C surface. Urea m-values for protein folding and other protein processes are quantitatively interpreted and predicted using these urea interaction potentials or K(p) values.
Asunto(s)
Betaína/farmacología , Desnaturalización Proteica/efectos de los fármacos , Estabilidad Proteica/efectos de los fármacos , Urea/farmacología , Sitios de Unión , Enlace de Hidrógeno , Modelos Químicos , Simulación de Dinámica Molecular , Pliegue de Proteína/efectos de los fármacos , Proteínas/química , Proteínas/efectos de los fármacosRESUMEN
The majority ( approximately 70%) of surface buried in protein folding is hydrocarbon, whereas in DNA helix formation, the majority ( approximately 65%) of surface buried is relatively polar nitrogen and oxygen. Our previous quantification of salt exclusion from hydrocarbon (C) accessible surface area (ASA) and accumulation at amide nitrogen (N) and oxygen (O) ASA leads to a prediction of very different Hofmeister effects on processes that bury mostly polar (N, O) surface compared to the range of effects commonly observed for processes that bury mainly nonpolar (C) surface, e.g., micelle formation and protein folding. Here we quantify the effects of salts on folding of the monomeric DNA binding domain (DBD) of lac repressor (lac DBD) and on formation of an oligomeric DNA duplex. In accord with this prediction, no salt investigated has a stabilizing Hofmeister effect on DNA helix formation. Our ASA-based analyses of model compound data and estimates of the surface area buried in protein folding and DNA helix formation allow us to predict Hofmeister effects on these processes. We observe semiquantitative to quantitative agreement between these predictions and the experimental values, obtained from a novel separation of coulombic and Hofmeister effects. Possible explanations of deviations, including salt-dependent unfolded ensembles and interactions with other types of surface, are discussed.
Asunto(s)
ADN/química , Conformación de Ácido Nucleico/efectos de los fármacos , Pliegue de Proteína/efectos de los fármacos , Sales (Química)/química , Sales (Química)/farmacología , Dicroismo Circular , Hidrocarburos/química , Represoras Lac/metabolismo , Modelos Químicos , Nitrógeno/química , Oxígeno/química , TermodinámicaRESUMEN
Noncovalent self-assembly of biopolymers is driven by molecular interactions between functional groups on complementary biopolymer surfaces, replacing interactions with water. Since individually these interactions are comparable in strength to interactions with water, they have been difficult to quantify. Solutes (osmolytes, denaturants) exert often large effects on these self-assembly interactions, determined in sign and magnitude by how well the solute competes with water to interact with the relevant biopolymer surfaces. Here, an osmometric method and a water-accessible surface area (ASA) analysis are developed to quantify and interpret the interactions of the remarkable osmolyte glycine betaine (GB) with molecular surfaces in water. We find that GB, lacking hydrogen bond donors, is unable to compete with water to interact with anionic and amide oxygens; this explains its effectiveness as an osmolyte in the Escherichia coli cytoplasm. GB competes effectively with water to interact with amide and cationic nitrogens (hydrogen bonding) and especially with aromatic hydrocarbon (cation-pi). The large stabilizing effect of GB on lac repressor-lac operator binding is predicted quantitatively from ASA information and shown to result largely from dehydration of anionic DNA phosphate oxygens in the protein-DNA interface. The incorporation of these results into theoretical and computational analyses will likely improve the ability to accurately model intra- and interprotein interactions. Additionally, these results pave the way for development of solutes as kinetic/mechanistic and thermodynamic probes of conformational changes and formation/disruption of molecular interfaces that occur in the steps of biomolecular self-assembly processes.
Asunto(s)
Betaína/química , Termodinámica , Agua/química , Amidas/química , Biopolímeros/química , Hidrocarburos Aromáticos/química , Modelos QuímicosRESUMEN
Recently, we developed a quantitative interpretation of surface tension increments (STI) of salts, acids, and bases in terms of the solute (or salt ion) partitioning model (SPM). Here, we obtain an analogous SPM-based interpretation of surface tension increments of nonelectrolytes, which yields local-bulk partition coefficients (K(p)) quantifying the accumulation or exclusion of these solutes in the local region near the air-water surface, and the amount of water per unit area of that region (b1σ). Sucrose exhibits the largest positive STI (approximately 1.4 ergs cm(-2) Osm(-1)). Assuming that K(p) = 0 for sucrose (i.e. that it is completely excluded from the surface of water), these STI provide a minimum estimate of b1σ of 0.20 H(2)O/Å(2), or a minimum thickness of the surface region of approximately two layers of water at bulk density. This is the same value as obtained previously from analysis of surface tension and hydrocarbon solubility increments of Na(2)SO(4) and also for the interaction of glycine betaine with anionic carboxylate surface, indicating that this quantity is not a function of the type of solute or surface investigated and therefore that it may represent the molecular thickness of the region. Partition coefficients of other nonelectrolytes investigated range from moderately excluded (e.g urea) to moderately accumulated (e.g. glycerol, ethylene glycol); strongly accumulated surface active solutes (e.g. mono-substituted alcohols) were not included in this analysis. Partition coefficients for many salt ions obtained from STI and hydrocarbon solubility increments fall in a rank order which corresponds to the Hofmeister series for protein folding and protein solubility, indicating a common pattern of accumulation or exclusion of salt ions at the air-water surface and nonpolar surfaces of dissolved hydrocarbons and proteins; no such patterns are observed for nonelectrolytes.
RESUMEN
Salts and uncharged solutes in aqueous solution exert effects on a wide range of processes in which large amounts ofbiopolymer surface are buried or exposed (folding/unfolding, complexation/dissociation, or precipitation/dissolution). A simple two-state solute partitioning model (SPM, where the solute is partitioned between the bulk and surface water) allows the interpretation and prediction of the thermodynamic effects of various uncharged solutes (e.g., urea, glycine betaine) on protein and nucleic acid processes in terms of structural information. The correlation of solute effects with various coarse-grained types of biopolymer surface exposed or buried in a process provides a novel probe for investigation of large-scale conformational changes. Solutes that are fully excluded from one or more types of biopolymer surface are useful to quantify changes in water of hydration of these surfaces in biopolymer processes. Additionally, application of the SPM to the analysis of non-Coulombic salt effects on various model processes provides an estimate for the hydration layer at surfaces and shows that ion effects are additive and independent of the nature of the counterion.
Asunto(s)
Modelos Químicos , Proteínas/química , Sales (Química)/química , Agua/química , Conformación ProteicaRESUMEN
Quantitative interpretation and prediction of Hofmeister ion effects on protein processes, including folding and crystallization, have been elusive goals of a century of research. Here, a quantitative thermodynamic analysis, developed to treat noncoulombic interactions of solutes with biopolymer surface and recently extended to analyze the effects of Hofmeister salts on the surface tension of water, is applied to literature solubility data for small hydrocarbons and model peptides. This analysis allows us to obtain a minimum estimate of the hydration b1 (H2O A(-2)), of hydrocarbon surface and partition coefficients Kp, characterizing the distribution of salts and salt ions between this hydration water and bulk water. Assuming that Na+ and SO4(2-) ions of Na2SO4 (the salt giving the largest reduction in hydrocarbon solubility as well as the largest increase in surface tension) are fully excluded from the hydration water at hydrocarbon surface, we obtain the same b1 as for air-water surface (approximately 0.18 H2O A(-2)). Rank orders of cation and anion partition coefficients for nonpolar surface follow the Hofmeister series for protein processes, but are strongly offset for cations in the direction of exclusion (preferential hydration). By applying a coarse-grained decomposition of water accessible surface area (ASA) into nonpolar, polar amide, and other polar surface and the same hydration b1 to interpret peptide solubility increments, we determine salt partition coefficients for amide surface. These partition coefficients are separated into single-ion contributions based on the observation that both Cl- and Na+ (also K+) occupy neutral positions in the middle of the anion and cation Hofmeister series for protein folding. Independent of this assignment, we find that all cations investigated are strongly accumulated at amide surface while most anions are excluded. Cation and anion effects are independent and additive, allowing successful prediction of Hofmeister salt effects on micelle formation and other processes from structural information (ASA).
Asunto(s)
Termodinámica , Amidas/química , Hidrocarburos/química , Iones/química , Micelas , Modelos Químicos , Estructura Molecular , Péptidos/química , Pliegue de Proteína , Proteínas/química , Proteínas/metabolismo , SolubilidadRESUMEN
We apply a recently developed surface-bulk partitioning model to interpret the effects of individual Hofmeister cations and anions on the surface tension of water. The most surface-excluded salt (Na2SO4) provides a minimum estimate for the number of water molecules per unit area of the surface region of 0.2 H2O A-2. This corresponds to a lower bound thickness of the surface region of approximately 6 A, which we assume is a property of this region and not of the salt investigated. At salt concentrations < or = 1 m, single-ion partition coefficients Kp,i, defined relative to Kp,Na+ = Kp,SO42- = 0, are found to be independent of bulk salt concentration and additive for different salt ions. Semiquantitative agreement with surface-sensitive spectroscopy data and molecular dynamics simulations is attained. In most cases, the rank orders of Kp,i for both anions and cations follow the conventional Hofmeister series, qualitative rankings of ions based on their effects on protein processes (folding, precipitation, assembly). Most anions that favor processes that expose protein surface to water (e.g., SCN-), and hence must interact favorably with (i.e., accumulate at) protein surface, are also accumulated at the air-water interface (Kp >1, e.g., Kp,SCN- =1.6). Most anions that favor processes that remove protein surface from water (e.g., F-), and hence are excluded from protein surface, are also excluded from the air-water interface (Kp,F- = 0.5). The guanidinium cation, a strong protein denaturant and therefore accumulated at the protein surface exposed in unfolding, is somewhat excluded from the air-water surface (Kp,GuH+ = 0.7), but is much less excluded than alkali metal cations (e.g., Kp,Na+ identical with 0, Kp,K+ = 0.1). Hence, cation Kp values for the air-water surface appear shifted (toward exclusion) as compared with values inferred for interactions of these cations with protein surface.
Asunto(s)
Aniones/química , Cationes/química , Sales (Química)/química , Agua/química , Aire , Iones/química , Modelos Moleculares , Estructura Molecular , Tensión Superficial , TermodinámicaRESUMEN
Recently, surface-sensitive spectroscopy data and molecular dynamics simulations have generated intense interest in the distribution of electrolyte ions between bulk water and the air/water interface. A partitioning model for cations and anions developed for biopolymer surface is extended here to interpret the effects of selected acids, bases, and salts on the surface tension of water. Data for electrolytes were analyzed by using a lower-bound value for the number of water molecules in the surface region [0.2 H(2)O A(-2) (approximately two layers of water)], obtained by assuming that both Na(+) and SO(4)(2-) (i.e., Na(2)SO(4)) are fully excluded from this region. Surface-bulk partition coefficients of atmospherically relevant anions and the proton are determined. Notably, we find that H(+) is most strongly surface-accumulated, I(-) is modestly accumulated, NO(3)(-) is evenly distributed, and OH(-) is weakly excluded.