Exopolysaccharides as bio-based rheology modifiers from microalgae produced on dairy industry waste: Towards a circular bioeconomy approach.

The feasibility of exopolysaccharides (EPS) production from cheese whey using Chlorella vulgaris was investigated as an example of circular bioeconomy application. The effects of dairy waste utilization in EPS biosynthesis and rheological properties were evaluated, comparing with both control conditions and commercial xanthan gum (CXG). A twofold increase in yield, up to 0.32 g L-1, was observed when Chlorella vulgaris was used for EPS production from whey rather than conventional fertilizers. Additionally, the EPS produced using cheese whey exhibited superior pseudoplasticity in the 0.4-1.0 (w/v) range compared to the control. The EPS from the whey wastewater contained functional groups similar to those of CXG (82.7 %). Moreover, the solutions containing 1 % biopolymer showed rheological profiles similar to those of the 0.4 % CXG. The molecular weight averages predominantly fell within the range of 284 to 324 kDa, as deduced using diffusion NMR, an innovative and rapid determination method for estimating EPS size. The potential applications of EPS notably extend beyond the dairy industry, reaching diverse market sectors, and thereby enhancing the competitiveness of microalgal biorefineries while contributing to the achievement of Sustainable Development Goals.

Influence of culture media composition on the rheology of microalgae concentrates on a large scale.

The role of microalgae in the production of bioproducts and biofuels, along with their ability to provide a sustainable pathway for wastewater treatment, makes them promising alternatives to conventional processes. Nevertheless, large-scale downstream processing requires an understanding of biomass rheology that needs to be addressed further. This study aimed to characterize microalgal concentrates rheologically in different culture media. The presence of bacteria was quantified by photorespirometry and plate counting techniques. The culture medium was found to significantly influence viscosity, with primary wastewater exhibiting the highest viscosity and seawater plus pig slurry the lowest. The concentration of heterotrophic bacteria was directly related to the viscosity. Extracellular polysaccharides (EPS) in supernatant exhibited an inverse viscosity trend compared to biomass concentrates, with pig slurry cultures having higher concentrations. These findings emphasize the profound influence of culture medium and EPS on the rheology of microalgal biomass, underscoring the need for continued research aimed at facilitating and optimizing large-scale downstream processes within the framework of a circular economy and the attainment of the Sustainable Development Goals (6,8, and 12).

Effect of Addition of Cross-Linked Starch on the Properties of Degraded PBAT Poly(butylene adipate-co-terephthalate) Films.

This work aimed to evaluate the properties of butylene adipate-co-terephthalate (PBAT) degraded after 1800 days of storage (DPBAT) by preparing blends (films) with crosslinked starch (Cm) through extrusion and thermocompression. Different ratios of DPBAT:Cm (70:30, 60:40, and 50:50 m/m) were prepared. The incorporation of Cm into DPBAT significantly changed the properties of the films by making them stiffer (increasing Young's modulus by up to 50%) and increasing the thermal resistance of DPBAT. The presence of crosslinked starch in the films made them less hydrophobic (with decreased contact angle and increased moisture content), but these parameters did not vary linearly with changes in the content of crosslinked starch in the blend (DPBAT:Cm). The microscopic images show an inhomogeneous distribution of Cm granules in the DPBAT matrix. Thus, the films prepared with PBAT show a significant decrease in their mechanical parameters and heat resistance after long-term storage. However, the preparation of blends of degraded DPBAT with crosslinked starch promoted changes in the properties of the films prepared by thermocompression, which could be useful for disposable packaging.

Innovation in Alternative Food Sources: A Review of a Technological State-of-the-Art of Insects in Food Products.

Insects present great potential for the food industry due to their easier rearing conditions and high nutritional value, in comparison with traditional livestock. However, there is a lack of evaluation of the technological status of food products developed with edible insects. Therefore, this study aims to analyze the emergent technological and scientific applications of edible insects in the food industry through a prospective study of patent documents and research articles. Espacenet was used as a research tool, applying the terms Insect, Pupa, Larva, or Nymph and the codes A23L33 and A23V2002. A total of 1139 documents were found-341 were related to the study. Orbit® was used to evaluate technological domains and clusters of concepts. Scopus database research was performed to assess the prevalence of insect research, with the term "edible and insect*". The main insects used were silkworms, bees, beetles, mealworms, crickets, and cicadas. Protein isolates were the predominant technology, as they function as an ingredient in food products or supplements. A diverse application possibility for insects was found due to their nutritional composition. The insect market is expected to increase significantly in the next years, representing an opportunity to develop novel high-quality/sustainable products.

Analysis and Modeling of Innovations in the Global Microalgae Lipids Market.

Microalgae lipids offer numerous advantages over those of plants and animals, enabling the sustainable commercialization of high value-added products in different markets. Although these markets are in a vertiginous annual expansion, technological life cycle modeling is a tool that has been rarely used for microalgae. Life cycle modeling is capable of assisting with decision-making based on data and is considered as a versatile model, usable in multiple software analyzing and diagnostic tasks. Modeling technological trends makes it possible to categorize the development level of the market and predict phase changes, reducing uncertainties and increasing investments. This study aims to fill this gap by performing a global analysis and modeling of microalgal lipid innovations. The Espacenet and Orbit platforms were used by crossing the keywords "microalgae", "lipid*", and the IPC code C12 (biochemistry and microbiology). Different sigmoid growth models were used in the present study. A successive repetition of the Chlorella genus category was found in the keyword clusters regarding extraction and separation of lipids. The life cycle S curve indicates a market starting at the maturity phase, where the BiDoseResp model stands out. The main countries and institutions at the technological forefront are shown, as well as potential technological domains for opening new markets.