Desensitizing Agent Previously Applied During In-Office Bleaching: A Double-Blind Randomized Clinical Trial

Abstract Objective: To compare the clinical effect of two desensitizing agents used before the application of a bleaching gel based on 35% hydrogen peroxide (HP). Material and Methods: 30 patients were selected, and two desensitizing agents with different mechanisms of action were applied: Fluorine Neutral 2% (FN), which acts by blocking dentinal canaliculi while Potassium Nitrate 5% with 2% Sodium Fluoride (PN/SF) that acts in nerve transmission and blockade. Desensitizers were used before the application of 35% HP. For whitening, three clinical sessions were performed, with an interval of seven days, with three applications of the bleaching gel for 15 minutes, totaling 45 minutes/session. Tooth sensitivity (TS) was assessed with the numerical analog scale, and a spectrophotometer was used to obtain the color variation (ΔE). ΔE were submitted to ANOVA and Tukey test (p<0.05), and TS data were submitted to a two-way ANOVA analysis. Results: For sensitivity experience, the Tukey test indicated differences between PN/SF and the placebo I, but there was no statistically significant difference between FN and the placebo II. The TS was lower when the desensitizing gel was used during the bleaching procedure compared to after treatment, regardless of the desensitizing agents. Conclusion: PN/SF before in-office tooth bleaching can reduce TS intensity, and the use of desensitizing gel before bleaching did not affect the bleaching efficacy.

The in vitro effect of solutions with or without sugar in dental bleaching.

The interaction of bleaching technique (in-office or at-home) and solutions (deionized distilled water with and without sugar, red wine with and without sugar, coffee with and without sugar) on the effectiveness of in vitro dental bleaching was evaluated. Hydrogen peroxide (HP) 37.5% gel was used for in-office bleaching, 3 applications of 8 min each, 3 sessions with an interval of 7 days. At-home bleaching was performed with 10% Carbamide peroxide (CP), 2 h/day, for 30 days. The enamel vestibular surfaces (n = 72) were subjected daily to test solutions for 45 min, washed with distilled water for 5 min and stored in artificial saliva. The enamel color analysis was performed with a spectrophotometer through color variation (ΔE) and luminosity variation (ΔL). Roughness analysis was performed by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Enamel composition was determined by energy dispersive X-ray spectrometry (EDS). The results were submitted to one-way analysis of variance (ANOVA) for ΔE, ΔL and EDS and two-way for AFM. For ΔE and ΔL there was no statistically significant difference. An increase in roughness was observed on the surface when exposed to a sugar-water solution for at-home bleaching and a lower concentration of Ca and P in the deionized water solution with sugar. Solutions containing or not sugar did not influence the bleaching potential, however the presence of sugar in the water solution increased the surface roughness with CP.

Surface roughness evaluation and whitening efficiency on tooth enamel after using whitening toothpaste: a randomized double-blinded study

The aim of this randomized double-blinded study was to evaluate the enamel surface roughness and color change after one month of whitening toothpaste use and the color stability obtained 1 month after its interruption. 30 volunteers were divided into 3 groups (n = 10) corresponding to the dentifrices: 1) Colgate Total 12 Clean Mint (TD) (Control), 2) Colgate Luminous White (LW) and 3) Sensodyne Whitening Extra Fresh (SB). The volunteers were impression with addition silicone to obtain an epoxy resin replica of the upper central incisor for the initial surface roughness evaluation using a profilometer and the initial color of the incisors and canines was evaluated with a spectrophotometer after one week of wash-out. After 1 month, the color of the central incisors and canines was measured again, and the volunteers were molded to obtain a second replica to the final roughness analysis. Data were submitted to ANOVA-one way (p≤0.05). The results showed that there was no statistical difference between the dentifrices for color difference and surface roughness for all the studied conditions. It was possible to conclude that the whitening dentifrices used in this study were not able to alter the initial color of the teeth and did not cause changes in the surface roughness of enamel.

Ellagic acid on the quality of the adhesive interface of class I composite resin restorations after aging

To evaluate the effect of ellagic acid on the inhibition of matrix metalloproteinase by analyzing the quality of the adhesive interface with bond strength measures in periods of 24 hours and six months of storage. Method: 40 healthy human third molars were prepared with class I cavities (5x4x3mm). The teeth were divided into four experimental groups: Group 1- without application of ellagic acid and storage time of 24 hours; Group 2- with ellagic acid/24 hours; G3- without ellagic acid/six months; Group 4- with ellagic acid/six months. Then, the cavities were restored with Single Bond Universal adhesive and Z350 composite resin, with and without the previous application of ellagic acid. Subsequently, hourglass-shaped specimens were obtained and subjected to the bond strength (BS) test (n = 10) in a universal testing machine. The bond test was performed after 24 hours and six months of storage. For the standard evaluation (n = 3) the samples were infiltrated with silver nitrate and placed in a developing solution for analysis in a Scanning Electron Microscope (SEM). The data obtained were analyzed with the Kruskal-Wallis non-parametric test, showing a statistically significant difference. Results: The highest bond strength values were found for the 24-hour groups followed by the groups with six months of storage. For nano-infiltration, groups G1 and G2 showed lower infiltration than groups G3 and G4. Conclusion: The previous application of ellagic acid did not affect the BS of the adhesive interface of the adhesive system analyzed, regardless of storage time.

Influence of the volume of restorative material on the concentration of stresses in the restorative interface.

BACKGROUND: To evaluate the microtensile strength in the adhesive interface depending on the volume of the composite resin used to restore class I cavities. MATERIAL AND METHODS: Forty-eight human third molars received a standardized class I cavity preparation and they were separated into six experimental groups: G1 - single-bottle adhesive system; G2 - bonding system with load; G3 - single-bottle adhesive associated with low-viscosity composite resin; G4 - loaded adhesive associated with low-viscosity composite; G5 - resin-modified glass ionomer associated with single-bottle adhesive; and G6 - resin-modified glass ionomer associated with loaded adhesive. All cavities were restored with a universal restorative composite. After completing the restorations, the samples were stored for seven days in a stove (37°C) and the microtensile bond strength was evaluated by producing slices and applying axial loading in an Instron universal testing machine at a speed of 0.5 mm/min. The thickness of the intermediate layer formed on the cavity floor to verify the relationship between the volume of restorative composite and the concentration of stresses in the buccal wall. With the data obtained in the microtensile strength test, an Analysis of Variance (ANOVA) was performed entirely at random. RESULTS: Duncan's test showed that group 4 (Filtek Flow/Optibond Solo Plus) obtained the highest mean of microtensile strength with no statistically significant difference to groups 3 (Filtek Flow/Single Bond), 5 (Vitremer/Single Bond), and 6 (Vitremer/Optibond Solo Plus). It also showed a statistically significant difference to groups 2 (Optibond Solo Plus) and 1 (Single Bond), with no statistical difference between the other groups studied. CONCLUSIONS: The highest mean of microtensile strength was obtained when the volume of the restorative material decreased through the interposition between the material and the adhesive system of a base with low elasticity modulus. Key words:Adhesion, microtensile, composite resin.

Microabrasion effect on enamel susceptibility to penetration of hydrogen peroxide: an experimental and computational study.

To evaluate in vitro transenamel/transdentinal of penetration of H2O2 after microabrasive. Computational models were performed to verify peroxide penetration and evaluate if geometric modifications could affect in vitro results. Enamel/dentin blocks from bovine incisors were prepared and randomly divided into groups (n = 15) according with abrasive (35% phosphoric acid and pumice or 6.6% hydrochloric acid and silica) and bleaching agents (16% carbamide peroxide and 35% H2O2). From artificial pulp chambers, the H2O2 concentration was measured and SEM was used for surface morphology. Numerical models were performed (Abaqus® v6.12) modifying slightly enamel/dentin thickness based on experimental data. All groups presented H2O2 penetration, although no significant difference was noted between the control and experimental groups (p > 0.05). The numerical analysis demonstrated the role of dental tissue thickness in the H2O2 penetration. Microabrasion is recommended as its association with bleaching procedures and small modifications in thicknesses of enamel/dentin can cause substantial changes in HP penetration. Such diffusion aspect is clinically relevant for the bleaching procedures since very thin enamel could present more peroxide propagation through dental tissues.

Influence of different photoinitiators on the resistance of union in bovine dentin: Experimental and microscopic study.

BACKGROUND: To evaluate in vitro the influence of photoinitiators on the microtensile strength of adhesive systems and composite resins in bovine dentin. MATERIAL AND METHODS: Forty dentin obtained from bovine teeth were randomly distributed in four groups (n = 10) according to the different adhesive systems and composite resins used: G1 - AAPS + VAPS (Ambar APS + Vittra APS); G2- AAPS + O (Ambar APS + Opallis); G3 - A + VAPS (Ambar + Vittra APS) and G4 - A + O (Ambar + Opallis). After restoration with the composite, the samples were sectioned to obtain toothpicks that were subjected to the microtensile and nanofiltration test (1.0 mm/min). RESULTS: The Kruskal-Wallis test did not show significant differences between the groups (p<0.05). The values in MPa were: AAPS + VAPS - 19.56 MPa; AAPS + O - 19.77 MPa; A + VAPS - 17.78 MPa; A + O - 22.44 MPa. The result of the Mann-Whitney test showed no significant differences depending on the adhesive (Ambar Universal- 19.11 MPa, Ambar APS Universal- 21.70 MPa) and the composite resin used (Vittra APS- 18.75 MPa, Opallis - 23.75 MPa). The AAPS + VAPS and AAPS + O groups showed intense silver nitrate infiltration. The A + APS group showed a moderate infiltration and the A + O group had a mild infiltration in the adhesive system/dentin interface. CONCLUSIONS: The use of different photoinitiators in the composition of adhesive systems and restorative composites did not affect their bond strength values and the presence of water in the solvent of the APS photoinitiator system had a negative influence, increasing the degree of infiltration in the hybrid layer when compared to the camphorquinone photoinitiator. Key words:Dentin, adhesive systems, composite resin, photoinitiators, tensile strength, nano-infiltration.

Effect of different adhesive strategies on the microtensile bond strength of dentin to indirect resin-based composite.

BACKGROUND: To evaluate the microtensile bond strength of indirect resin composite bonded to dentin using five different adhesives strategies. MATERIAL AND METHODS: Forty specimens (Solidex) were produced and randomly into five groups with different adhesives strategies: (G1)- Single Bond Universal + etch + silane + RelyX Ultimate, (G2)- Single Bond Universal + silane + RelyX Ultimate, (G3)- Single Bond Universal + etch + RelyX Ultimate, (G4)- Single Bond Universal + RelyX Ultimate, and (G5)-Scotchbond Multi-purpose + RelyX ARC. After cementation the specimens were stored in 100% humidity for 24hours at 37°C. The specimens were sectioned perpendicular to the adhesive interface to obtain beams and submitted to microtensile test. Microtensile values were expressed in MPa and analyzed by one-way ANOVA and multiple comparison Tukey tests (α=0.05). RESULTS: The mean bond strength in MPa groups were: G1=11,48, G2=14,15, G3=16,95, G4=17,03 and G5=16,80. Statistical analysis showed that the bond strength values were not significantly affected by the different adhesive strategies. CONCLUSIONS: Cementation of dentin to indirect resin composite cannot be significantly affected by different adhesive strategies used. The specimens treated with silane, etch associated with Single bond universal did not increase bond strength values. Key words:Adhesives, dental cements, dentin.

Effects of desensitizing products on the reduction of pain sensitivity caused by in-office tooth bleaching: a 24-week follow-up.

OBJECTIVE: To clinically assess the effect of desensitizing gels and dentifrices on the reduction in pain sensitivity and color variation during tooth bleaching. METHODOLOGY: A total of 108 volunteers were randomly separated into the following groups of n=12: GT/S-glycerine and thickener/sucralose; NF/S-potassium nitrate and sodium fluoride/sucralose; NA/S-potassium nitrate and arginine/sucralose; GT/AC-glycerine and thickener/arginine and calcium carbonate; NF/AC-potassium nitrate and sodium fluoride/arginine and calcium carbonate; NA/AC-potassium nitrate and arginine/arginine and calcium carbonate; GT/PN-glycerine and thickener/potassium nitrate; NF/PN-potassium nitrate and sodium fluoride/potassium nitrate; and NA/PN-potassium nitrate and arginine/potassium nitrate. Sensitivity was assessed with the numerical analogue scale, and color variation (ΔE) was measured with a spectrophotometer. The sensitivity values obtained were subjected to a multivariate analysis of variance (MANOVA) and color variation values were subjected to a randomized analysis of variance (p<0.05). RESULTS: The NF/AC, NA/AC, NF/PN, and NA/PN groups presented lower sensitivity values and reduced sensitivity compared to those of the other groups throughout the clinical sessions. None of the groups showed sensitivity at the 24-week assessment. Statistically, no significant difference were observed in the color values among the groups four weeks after the beginning of bleaching (p=0.074). Additionally, the color assessment of all groups was statistically similar four weeks (p=0.084) and 24 weeks (p=0.118) after the beginning. CONCLUSION: Our results indicate that adding NF/S, NA/S, NF/AC, and NA/AC desensitizers to tooth bleaching protocols reduces pain sensitivity without affecting its effectiveness.

Influence of cavo superficial enamel acid-etching on the microtensile bond strength of low-shrinkage composite resin / Influência do condicionamento ácido do ângulo cavo superficial na resistência adesiva de restaurações em um compósito de baixa contração de polimerização

Introduction: To prevent the shrinkage stresses produced during polymerization, composite resins of low polymerization shrinkage were developed. Objective: To evaluate the microtensile bond strength in class I cavities restored by acid-etching the cavosurface angle and with composite resins indicated for posterior teeth. Material and method: 48 healthy molars were selected and divided into six groups (n = 8), considering that the cavosurface enamel of three groups was etched with 35% phosphoric acid. The teeth were restored with the Clearfil SE Bond adhesive system and Filtek Z350 XT, Empress Direct, and Charisma Diamond composite resins, which were light-cured for 40 seconds. After 24 hours, the teeth were taken to a cutting machine, which produced sections in the buccolingual and mesiodistal directions. This resulted in toothpicks of 0.9×0.9 mm that were taken to the universal testing machine for the microtensile bond strength test. Statistical analysis was performed with ANOVA and Tukey's test (p < 0.05). Result: There was no statistically significant difference between the groups evaluated. Conclusion: Acid-etching the cavosurface angle did not affect the performance of restorations, probably due to the adhesive system used.

Introdução: Com o intuito de se evitar as tensões geradas durante a contração de polimerização das resinas compostas, foram desenvolvidas as resinas compostas de baixa contração de polimerização. Objetivo: Avaliar a resistência à microtração em cavidades classe I restauradas com tratamento ácido do ângulo cavo superficial e resina composta indicada para dentes posteriores. Material e método: Foram selecionados 48 molares hígidos que foram divididos em 6 grupos (n=8), sendo que 3 desses tiveram o esmalte cavo superficial condicionado com ácido fosfórico a 35%. Os dentes foram restaurados com o sistema adesivo Clearfil SE Bond e as resinas compostas Filtek Z350 XT, Empress Direct e Charisma Diamond, fotoativadas por 40 segundos. Após 24 horas, os dentes foram levados para máquina de corte, na qual foram realizados cortes no sentido vestíbulo-lingual e no sentido mésio-distal obtendo - se palitos de 0,9×0,9 mm que foram levadas para a máquina de ensaio universal para a realização do teste de microtração. Para análise estatística foi realizado análise de variância e teste de Tuckey (p < 0,05). Resultado: Não houve diferença estatística significante entre os grupos avaliados. Conclusão: O condicionamento ácido do ângulo cavo superficial não influenciou no desempenho das restaurações provavelmente devido ao sistema adesivo utilizado.

O efeito do tabagismo na ocorrência da cárie dentária: uma revisão de literatura / The effect of smoking on the occurrence of dental caries: a literature review

Introdução: A cárie dentária é a doença bucal mais prevalente no mundo, sendo uma das mais estudadas há anos. Diversos fatores estão envolvidos em seu desenvolvimento, alguns de forma direta, outros indiretamente. O hábito de fumar considerado como contribuinte para diversas patologias bucais, como doença periodontal, câncer oral e atualmente relacionado com a doença cárie. Objetivo: Analisar a associação do tabagismo com a ocorrência da cárie dentária. Materiais e Métodos: Este trabalho tratou-se de um estudo de revisão de literatura sobre os efeitos do tabagismo na cárie dentária onde as informações foram obtidas a partir de 61 artigos científicos em português, inglês, espanhol e francês, consultados em bases de dados online, com disponibilidade na íntegra, que apresentavam coerência com a temática e com data de publicação entre 2008 e 2019. Foram excluídas da pesquisa, publicações cujos títulos e/ou objetivos não possuíam ligação direta com a temática ou que fugiam do objeto de estudo. Resultados: Os resultados da literatura mostraram que fumantes têm risco aumentado de desenvolver cárie dental em comparação com não fumantes. A nicotina é apontada como o componente do tabaco responsável pelo aumento da proliferação bacteriana dentro do biofilme dental. Além disso os biofilmes tornam-se mais compactos e resistentes em presença dessa substância. Conclusão: A comunidade científica tem mostrado que a nicotina é um dos fatores modificadores para o desenvolvimento da doença, sendo necessárias mais trabalhos nesse âmbito para elucidar essa questão.

Introduction: Dental caries is the most prevalent oral disease in the world, being one of the most studied for years. Several factors are involved in its development, some directly, others indirectly. The habit of smoking has been considered as a contributor to several oral pathologies, such as periodontal disease, oral cancer and currently has been related to caries disease. Objective: To analyze the association between smoking and the occurrence of dental caries. Materials and Methods: This work was a study of literature review on the effects of smoking on dental caries where the information was obtained from 61 scientific articles in Portuguese, English, Spanish and French, consulted in online databases , with full availability, which were coherent with the theme and with publication date between 2008 and 2019. Publications whose titles and / or objectives did not have a direct link with the theme or which escaped the object of study were excluded from the research. Results: Results in the literature have shown that smokers are at increased risk of developing dental caries compared to non-smokers. Nicotine is identified as the tobacco component responsible for the increase in bacterial proliferation within the dental biofilm. In addition, biofilms become more compact and resistant in the presence of this substance. Conclusion: The scientific community has shown that nicotine is one of the modifying factors that contributes to the development of the disease, requiring further research in this area to further clarify this issue.

Effects of desensitizing products on the reduction of pain sensitivity caused by in-office tooth bleaching: a 24-week follow-up

Abstract Objective To clinically assess the effect of desensitizing gels and dentifrices on the reduction in pain sensitivity and color variation during tooth bleaching. Methodology A total of 108 volunteers were randomly separated into the following groups of n=12: GT/S-glycerine and thickener/sucralose; NF/S-potassium nitrate and sodium fluoride/sucralose; NA/S-potassium nitrate and arginine/sucralose; GT/AC-glycerine and thickener/arginine and calcium carbonate; NF/AC-potassium nitrate and sodium fluoride/arginine and calcium carbonate; NA/AC-potassium nitrate and arginine/arginine and calcium carbonate; GT/PN-glycerine and thickener/potassium nitrate; NF/PN-potassium nitrate and sodium fluoride/potassium nitrate; and NA/PN-potassium nitrate and arginine/potassium nitrate. Sensitivity was assessed with the numerical analogue scale, and color variation (ΔE) was measured with a spectrophotometer. The sensitivity values obtained were subjected to a multivariate analysis of variance (MANOVA) and color variation values were subjected to a randomized analysis of variance (p<0.05). Results The NF/AC, NA/AC, NF/PN, and NA/PN groups presented lower sensitivity values and reduced sensitivity compared to those of the other groups throughout the clinical sessions. None of the groups showed sensitivity at the 24-week assessment. Statistically, no significant difference were observed in the color values among the groups four weeks after the beginning of bleaching (p=0.074). Additionally, the color assessment of all groups was statistically similar four weeks (p=0.084) and 24 weeks (p=0.118) after the beginning. Conclusion Our results indicate that adding NF/S, NA/S, NF/AC, and NA/AC desensitizers to tooth bleaching protocols reduces pain sensitivity without affecting its effectiveness.

Conservative Substitution of Fractured Ceramic Onlays Using Self-Adhesive Cement: Case Report / Substituição Conservadora de Onlays Cerâmicas Fraturadas Utilizando Cimento Autoadesivo: Relato de Caso

The advances in bonding of ceramics and self-adhesive resin cements to tooth structure make this treatment a feasible alternative to restore posterior teeth. This case report described the removal of two fractured onlays and the fabrication of new lithium disilicate onlays cemented with self-adhesive resin cement. The rationale for various choices in this treatment protocol is detailed with reference to the pertinent literature. It is concluded that the clinical success of the technique depends on the correct identification of the case for which this treatment is appropriate and on the successful execution of the clinical steps involved. (AU)

Os avanços na adesão de cerâmicas e cimentos resinosos autoadesivos à estrutura dentária tornam este tratamento uma alternativa viável para restaurar os dentes posteriores. Ester relato de caso descreveu a remoção de duas onlays fraturadas e confecção de novas onlays de dissilicato de lítio cimentadas com cimento resinoso auto-adesivo. A justificativa para várias escolhas neste protocolo de tratamento é detalhada com referência à literatura pertinente. O sucesso clínico da técnica depende da correta identificação do caso para o qual este tratamento é adequado e da execução bem-sucedida das etapas clínicas envolvidas. (AU)

Effects of desensitizing dentifrices on the reduction of pain sensitivity caused by in-office dental whitening: a double-blind controlled clinical study.

Objective: The purpose of this study was to clinically evaluate the influence of desensitizing dentifrices applied through a plastic tray on reducing the pain sensitivity and color variation caused by in-office dental whitening and to evaluate differences among such dentifrices through a controlled double-blind clinical study. Materials and methods: A prospective study was conducted with 48 individuals between 18 and 30 years without gender distinction. For the dental whitening, 35% hydrogen peroxide was used in three clinical sessions. After each whitening session, the volunteers used a plastic tray containing one of the dentifrices (sucralose- S, sodium fluoride - SF, arginine and calcium carbonate - ACC, and 5% potassium nitrate - PN) for 4 hrs during the night. The evaluation of the sensitivity associated with the use of the plastic tray in each whitening session was performed using the analog numerical scale with scores from 0 to 10. The color variation (ΔE) was determined with a spectrophotometer. The pain sensitivity data were submitted to the multivariate analysis of variance with repeated measurements and a Lambda Wilks test (p<0.05). To analyze the color variation, a one-way ANOVA was applied (p<0.05). Results: The ACC and 5% NP groups showed a reduction in sensitivity in relation to the other groups (p<0.05). There was a reduction in sensitivity after placement of the tray with dentifrice. The color evaluation associated with the dentifrice showed no difference (p=0.9186). Conclusion: The use of desensitizing dentifrices with ACC or 5% NP in a plastic tray was effective for the reduction of pain sensitivity, and the use of a desensitizing dentifrice did not decrease the effectiveness of whitening.

Estudo in vitro da morfologia dos canais radiculares do primeiro pré-molar inferior, utilizando tomografia computadorizada de feixe cônico / In vitro study of mandibular first premolar root canals morphology using cone-beam computed tomography

Introdução: o tratamento endodôntico objetiva limpar e modelar o sistema de canais radiculares. O preparo químico-mecânico e a obturação tridimensional (3D) do sistema de canais radiculares são baseados no conhecimento da anatomia dentária interna. As radiografias convencionais e periapicais digitais apresentam limitações na definição da imagem, devido à anatomia 3D do elemento a ser tratado, que é compactada em uma imagem bidimensional. A tomografia computadorizada de feixe cônico (TCFC) é, atualmente, um interessante instrumento para análises anatômicas, devido à precisão volumétrica e ausência de sobreposição de estruturas. Métodos: foram analisados, in vitro, sessenta e quatro (n = 64) primeiros pré-molares inferiores humanos extraídos por indicação terapêutica. Em seguida, foram feitos protótipos com gengiva artificial de silicone, posicionando-se os elementos de forma semelhante a arcadas, para serem geradas as imagens de TCFC e analisadas por um endodontista experiente. O número de canais por raiz foi quantificado em cada elemento dentário e suas configurações anatômicas foram descritas seguindo a classificação de Vertucci. Resultados: foram encontrados 59% de canais Tipo I (n = 38); 0% do Tipo II (n = 0); 9% do Tipo III (n = 6); 6% do Tipo IV (n = 4); 16% do Tipo V (n = 10); 3% do Tipo VI (n = 2); 5% do Tipo VII (n = 3); 0% do Tipo VIII (n = 0) e 2% do Tipo C-shaped. Conclusão: as imagens de TCFC revelam em 3D a anatomia dentária interna, permitindo o planejamento da terapia endodôntica e um mapeamento detalhado da morfologia interna. O conhecimento dessa microanatomia viabiliza uma maior previsibilidade na realização do tratamento, assim como no seu prognóstico, e possibilita melhorar a descontaminação de áreas anatômicas complexas (AU).

Introduction: Endodontic treatment aims to clean and shape the root canal system. Chemomechanical preparation and tridimensional (3D) filling of the root canal system are based on knowledge of internal dental anatomy. Conventional and periapical digital radiographs present limitations in image definition due to the tridimensional anatomy of the tooth to be treated. The 3D anatomy is compressed in a two-dimensional image. Cone-beam computed tomography (CBCT) is currently an interesting tool for anatomical analysis because of volumetric precision and absence of overlapping structures. Methods: A total of 64 (sixty-four) human mandibular first premolars were extracted for therapeutic recommendation. Then prototypes were manufactured with artificial gingiva made of silicone, positioning the teeth in a format similar to the arches. They were subjected to CBCT examination and analyzed by an experienced endodontist. The number of canals per root was quantified for each tooth, and their anatomical configurations were described following Vertucci's classification. Results: The following were found: Type I (n = 38) 59%; Type II (n = 0); Type III (n = 6) 9%; Type IV (n = 4) 6%; Type V (n = 10) 16%; Type VI (n = 2) 3%; Type VII (n = 3) 5%; Type VIII (n = 0) and C-shaped 2%. Conclusion: CBCT image reveals tridimensional anatomy on the basis of which endodontic therapy is planned. It maps internal morphology in detail. Knowledge of micro-endodontics allows for greater predictability in treatment as well as prognosis, in addition to improving decontamination of complex anatomical areas.

Evaluation of Finishing/Polishing Techniques on Low-Shrink Posterior Restorative After Mechanical Cycling / Avaliação de Técnicas de Acabamento/Polimento em Restaurações Posteriores de Baixa Contração Após Ciclagem Mecânica

The aim of this study was to evaluate the surface roughness of a silorane and methacrylate-based composite resins subjected to different finishing/polishing techniques. Twelve disk specimens were prepared from each composite resin: P90®, Z350® and Charisma, divided into 12 groups according to the finishing/polishing technique: no finishing/polishing (control); finishing with 1112 FF diamond burs; finishing with 1112 FF diamond burs associated to Enhance/Pogo; finishing with 1112 FF diamond burs associated to Enhance/Pogo/Polishing/Poli I and II pastes/Fotogloss. After initial readouts of surface roughness, the specimens were subjected to mechanical cycling (1.200.000 cycles) and immediately subjected to final roughness readouts. Surface roughness means was statistically analyzed by ANOVA and Tukey-Kramer test (α=0.05). SEM images were realized after finishing/polishing and after mechanical cycling. The P90 composite showed surface roughness values similar to other investigated composites. However, significant difference was observed in finishing/polishing techniques. The diamond burs group showed the highest surface roughness differing from the other composite resins (α < 0.05). Enance/Pogo showed the lowest results, which presented no difference compared to the polishing paste group (α > 0.05). The low-shrink posterior restorative showed similar surface roughness when compared to dimethacrylate composite resins and suitable to posterior restorations. (AU).

O objetivo deste estudo foi avaliar a rugosidade superficial de resinas compostas à base silorano e metacrilato submetidas a diferentes técnicas de acabamento/polimento. Foram preparadas 12 amostras de disco de cada resina composta: P90®, Z350® e Carisma, divididas em 12 grupos de acordo com a técnica de acabamento / polimento: sem acabamento / polimento (controle); acabamento com ponta diamantada 1112 FF; acabamento com ponta diamantada 1112 FF associada a Enhance / Pogo; acabamento com ponta diamantada 1112 FF associada a Enhance / Pogo / Polishing / Pastas Poli I e II / Fotogloss. Após as leituras iniciais da rugosidade da superfície, os espécimes foram submetidos a ciclos mecânicos (1.200.000 ciclos) e submetidos imediatamente a leituras de rugosidade final. As medias de rugosidade superfícial foram analisadas estatisticamente por ANOVA e teste de Tukey-Kramer (α = 0,05). As imagens de MEV foram realizadas após o acabamento / polimento e após a ciclagem mecânica. O compósito P90 mostrou valores de rugosidade superficial semelhantes a outros compósitos investigados. Tough, mostrou diferença significativa nas técnicas de acabamento / polimento. O grupo de pontas damantadas apresentou maior rugosidade superficial que diferiu das outras resinas compostas (α <0,05). Enance / Pogo mostrou os menores resultados, que não apresentaram diferença em relação ao grupo de pasta de polimento (α> 0,05). O material restaurador posterior de baixa contração apresentou rugosidade superficial semelhante quando comparado as resinas compostas de dimetacrilato e são restaurações adequadas para região posterior. (AU).

Resolution of a fluorosis case through the association of minimally invasive techniques: microabrasion and tooth bleaching

Color changes may interfere with smile balance and they represent a clinical challenge to dentists. Dental fluorosis originates from intrinsic factors and it is a disorder of enamel formation during the phase of teeth development, resulting in the change of enamel color. This clinical case report aimed to present the resolution of a case of dental fluorosis through the association of minimally invasive techniques, namely microabrasion and tooth bleaching. A 27-year-old male patient sought the dental clinic of the School of Dentistry of Piracicaba (FOP - UNICAMP, Brazil) presenting striped and symmetrical white stains and generalized chromogenic biofilm. After anamnesis and clinical examination, the patient was diagnosed with fluorosis stains. Initially, adequacy of the oral environment was performed with prophylaxis and supragingival scraping. Then, the enamel microabrasion technique was performed with 6% hydrochloric acid associated with silicon carbide (Whiteness RM - FGM) and supervised at-home bleaching was performed with 16% carbamide peroxide (Whiteness Simple 16% - FGM). In conclusion, the treatment performed reestablished the aesthetics and harmony of smile color with minimally invasive procedures without causing tooth sensitivity

Minimally invasive aesthetic rehabilitation in composite resin: report of two clinical cases / Reabilitação estética minimamente invasiva em resina composta: relato de dois casos clínicos

Patient demand looking for the perfect smile has been steadily growing in the last few years. Thus, these two case reports discuss some ultra-conservatives approach to achieve good esthetic results. In the first case the clinical protocol of a restorative approach is described, the cosmetic remodeling of the teeth and in the second case, the replacement of extensive unsatisfactory composite restorations. The treatment planning was based on diagnostic waxing and the making of mock-up in both cases. Teeth bleaching were also performed before restoration. To conclude, these conservative relative therapies with composite resin restorations provide an ultra-minimally invasive protocol with excellent esthetic appearances and fuction, especially for young people. (AU)

A demanda do paciente que procura o sorriso perfeito tem crescido constantemente nos últimos anos. Assim, esses dois relatos de casos clínicos discutem uma abordagem ultraconservadora para alcançar bons resultados estéticos. No primeiro caso é descrito o protocolo clínico de uma abordagem restauradora, a remodelação cosmética dos dentes e, no segundo caso, a substituição de restaurações compostas extensas insatisfatórias. O planejamento do tratamento baseouse em enceramento diagnóstico e a confecção de mock-up. O clareamento dos dentes foi realizado antes da restauração. Para concluir, essas terapias relativas conservadoras com restaurações de resina composta fornecem um protocolo ultra minimamenteinvasivo com excelentes aparências estéticas. (AU)