A Multicenter Evaluation of a Nongel Mechanical Separator Plasma Blood Collection Tube for Testing of Selected Therapeutic Drugs.

BACKGROUND: Some therapeutic drugs are unstable during sample storage in gel tubes. BD Vacutainer® Barricor™ Plasma Blood Collection Tube with nongel separator was compared with plasma gel tubes, BD Vacutainer PST™, PST II, and BD Vacutainer Serum Tube for acetaminophen, salicylate, digoxin, carbamazepine, phenytoin, valproic acid, and vancomycin during sample storage for up to 7 days. METHODS: Seven hospital sites enrolled 705 participants who were taking at least one selected drug. The study tubes were collected and tested at initial time (0 h), after 48 h of storage at room temperature and on day 7 (after additional 5 days of refrigerated storage). The performance of BD Barricor tube was evaluated for each drug by comparing BD Barricor samples with samples from the other tubes at 0 h from the same participant; stability was evaluated by comparing test results from the same tube at 0 h, 48 h, and 7 days. RESULTS: At 0 h, BD Barricor showed clinically equivalent results for selected therapeutic drugs compared with the other tubes, except phenytoin in BD PST. Phenytoin samples ≥20 µg/mL in BD PST had 10-12% lower values than samples in BD Barricor. During sample storage, all selected drugs remained stable for 7 days in BD Barricor and in serum aliquots. In BD PST, all drugs remained stable except phenytoin and carbamazepine and in BD PST II except for phenytoin. CONCLUSION: The BD Barricor Tube is effective for the collection and storage of plasma blood samples for therapeutic drug monitoring without sample aliquoting.

Switching from serum to plasma: Implementation of BD Vacutainer® Barricor™ Plasma Blood Collection Tubes improves sample quality and laboratory turnaround time.

BACKGROUND: For blood, most 24/7 standard (immuno)chemistry parameters are either measured in serum or in lithium heparin plasma. Standard serum and plasma gel tubes have their shortcomings when timely analysis of high quality results is required. Serum requires clotting time and interference of gel globules in the plasma and adsorption of hydrophobic analytes into the gel layer potentially compromises high quality results from lithium heparin gel tubes. We sought to evaluate the impact of BD Vacutainer® Barricor™ Tube (Barricor™) on laboratory efficiency by measuring its effect on TAT and sample quality, as well as evaluate potential cost opportunities resulting from improved sample quality. METHODS: TAT data and remediation activities were extracted and captured during two 6 months phases. Serum was used as the predominant matrix in the first phase and Barricor™ plasma was used in the second phase. RESULTS: Barricor™ significantly reduced the median TAT, especially for routine-priority samples during peak-hours. The TAT key-performance-indicator (percentage of results available within 90 â€‹min) improved to >90% for STAT as well as routine priority samples. Converting from serum gel, Barricor™ reduced fibrin-related remediation activities from 2.3% to 0.4%. This resulted in remediation-related cost reduction of €6.010,47 over the study period. CONCLUSIONS: By implementing Barricor™, we saw a significant reduction in TAT and a reduction in fibrin-related remediation time and costs, when compared to a predominant serum workflow. The improved TAT opens up the possibility of consolidating to one single priority level, eliminating the need for the use of the STAT priority level.

Evaluation of Pain and Specimen Quality by Use of a Novel 25-Gauge Blood Collection Set With Ultra-Thin Wall Cannula and 5-Bevel Tip Design.

BACKGROUND: Phlebotomy has significant impact on overall patient satisfaction. Smaller gauge needles, such as a 25 gauge, may lessen patient discomfort but increase hemolysis and tube-filling times. Our studies evaluated the effect of a 5-bevel, 25-gauge blood collection set (BCS) with ultra-thin wall cannula [BD Vacutainer® UltraTouch™ Push Button BCS (UltraTouch)] on patient pain and anxiety compared with two 3-bevel, thin-wall, 23-gauge BCSs [BD Vacutainer® Safety-Lok™ (Safety-Lok) and Greiner Bio-One Vacuette® (Vacuette)]. Our studies also evaluated the 25-gauge UltraTouch for sample quality and tube filling compared with the 3-bevel, thin-wall, 23-gauge BD Vacutainer Push Button BCS. METHODS: We conducted 2 studies with 214 subjects to compare pain and anxiety regarding future phlebotomy with the 3 aforementioned devices. Another study with 52 subjects assessed hemolysis in specimens collected with the UltraTouch and Push Button BCS; bench testing evaluated tube-filling times with these devices. A questionnaire captured pain upon needle insertion, overall pain, and anxiety regarding future phlebotomy. Hemolysis was evaluated visually, by Hemolysis Index and hemolysis-sensitive indicators potassium (K) and lactate dehydrogenase (LDH). RESULTS: A statistically significant decrease was noted for overall pain with UltraTouch compared with Vacuette and with insertion pain compared with Safety-Lok. There was no significant difference in anxiety regarding future phlebotomy. No increase was observed in Hemolysis Index, K or LDH. Tube-filling times were comparable for each device. CONCLUSIONS: The 25-gauge UltraTouch provided less overall pain compared with the 23-gauge Vacuette, less pain upon needle insertion than the 23-gauge Safety-Lok, and no compromise in specimen quality or flow rate.

The economic impact of poor sample quality in clinical chemistry laboratories: results from a global survey.

Background Despite advances in clinical chemistry testing, poor blood sample quality continues to impact laboratory operations and the quality of results. While previous studies have identified the preanalytical causes of lower sample quality, few studies have examined the economic impact of poor sample quality on the laboratory. Specifically, the costs associated with workarounds related to fibrin and gel contaminants remain largely unexplored. Methods A quantitative survey of clinical chemistry laboratory stakeholders across 10 international regions, including countries in North America, Europe and Oceania, was conducted to examine current blood sample testing practices, sample quality issues and practices to remediate poor sample quality. Survey data were used to estimate costs incurred by laboratories to mitigate sample quality issues. Results Responses from 164 participants were included in the analysis, which was focused on three specific issues: fibrin strands, fibrin masses and gel globules. Fibrin strands were the most commonly reported issue, with an overall incidence rate of ∼3%. Further, 65% of respondents indicated that these issues contribute to analyzer probe clogging, and the majority of laboratories had visual inspection and manual remediation practices in place to address fibrin- and gel-related quality problems (55% and 70%, respectively). Probe maintenance/replacement, visual inspection and manual remediation were estimated to carry significant costs for the laboratories surveyed. Annual cost associated with lower sample quality and remediation related to fibrin and/or gel globules for an average US laboratory was estimated to be $100,247. Conclusions Measures to improve blood sample quality present an important step towards improved laboratory operations.