Determinants of discomfort from combined exposure to noise and vibration in dumper operators of mining industry in India.

In the mining industry, dumper operators are exposed to combined noise and vibration, leading to discomfort. Dumpers are heavy earth-moving machines that are used for carrying bulky material in mining industries. Dumper operators are exposed to physical hazards such as vibration, noise, heat, and humidity, throughout their lifetime of work. Fifty-four dumper operators working in mines were selected for this study. Noise was measured as per the guidelines of the Directorate General Mining Safety, India, and whole-body vibration was measured as per the guidelines of ISO 2631-1::1997. Noise Pro DLX, Type 2 noise dosimeters were used for the measurement of personal noise exposure while SV-106 six channels vibration meters were used for whole body vibration (WBV) exposure measurement. Discomfort was calculated using the regression equation developed by Huang and Griffin (2014). The total discomfort level of mine operators was about 192. A predictive equation was derived by using a regression model to determine the contribution of individual variables causing discomfort. It was observed that for every unit increase in noise (LAeq), discomfort increased by 10.20 units, a one-unit increase in vibration (A (8)) led to a 51.7-unit increase in discomfort, while an increase of one unit of exposure time increased the discomfort level by 5.24 units.

Respirable dust and crystalline silica exposure among different mining sectors in India.

Silicosis is one of the major occupational lung diseases among miners worldwide. The objective of this study was to characterize respirable dust and crystalline silica from limestone, iron, and bauxite mines in India. In total, 86 personal dust samples were collected from limestone (n = 30), iron (n = 30), and bauxite (n = 26) mines using dust sampler. The concentration of crystalline silica was analyzed using FTIR spectroscopy. Geometric mean respirable dust concentrations observed were 0.92, 1.08, and 1.07 mg/m3 for limestone, iron, and bauxite mines respectively, similarly for crystalline silica concentration observations were 0.015, 0.012 and 0.008 mg/m3 respectively. Among the three studied ores, mean crystalline silica concentration was statistically significant (p < 0.05) using an analysis of variance test. Although the detected levels of exposure are within the Indian exposure limits, attention should be paid to lower crystalline silica levels to minimize the risk of silicosis.

Exposure profile of respirable crystalline silica in stone mines in India.

Silicosis is one of the major occupational lung diseases among stone miners; currently, it is a major concern in India given its 12-30% prevalence. The objective of this study was to determine the exposure profile of respirable dust and crystalline silica concentrations from sandstone, masonry stone, and granite stone mines in India. Personal respirable dust samples were collected from each type of mine and analyzed for dust and respirable crystalline silica concentrations. The mean dust concentrations were found to be 0.47 mg/m3, 1.24 mg/m3, and 3.28 mg/m3 for sandstone, masonry stone, and granite stone mines, respectively. The mean respirable crystalline silica concentrations were 0.12 mg/m3 for sandstone mines and 0.17 mg/m3 for masonry stone and granite stone mines. The concentrations in sandstone mines was below the standard stipulated by the Directorate General of Mine Safety in India (0.15 mg/m3), whereas in the granite and masonry mines the concentrations just exceeded the limit. The Indian standard for respirable crystalline silica is three to six times higher than the standard set elsewhere (i.e., by OSHA, ACGIH®, and Egyptian Labor Law standards). Considering the large number of silicosis cases among stone miners in India, the present standard appears inadequate. It is recommended that the standard be lowered to match international standards that minimize the risk of silicosis.