Evaluation of Two Portable Hyperspectral-Sensor-Based Instruments to Predict Key Soil Properties in Canadian Soils.

In contrast with classic bench-top hyperspectral (multispectral)-sensor-based instruments (spectrophotometers), the portable ones are rugged, relatively inexpensive, and simple to use; therefore, they are suitable for field implementation to more closely examine various soil properties on the spot. The purpose of this study was to evaluate two portable spectrophotometers to predict key soil properties such as texture and soil organic carbon (SOC) in 282 soil samples collected from proportional fields in four Canadian provinces. Of the two instruments, one was the first of its kind (prototype) and was a mid-infrared (mid-IR) spectrophotometer operating between ~5500 and ~11,000 nm. The other instrument was a readily available dual-type spectrophotometer having a spectral range in both visible (vis) and near-infrared (NIR) regions with wavelengths ranging between ~400 and ~2220 nm. A large number of soil samples (n = 282) were used to represent a wide variety of soil textures, from clay loam to sandy soils, with a considerable range of SOC. These samples were subjected to routine laboratory soil analysis before both spectrophotometers were used to collect diffuse reflectance spectroscopy (DRS) measurements. After data collection, the mid-IR and vis-NIR spectra were randomly divided into calibration (70%) and validation (30%) sets. Partial least squares regression (PLSR) was used with leave one out cross-validation techniques to derive the spectral calibrations to predict SOC, sand, and clay content. The performances of the calibration models were reevaluated on the validation set. It was found that sand content can be predicted more accurately using the portable mid-IR spectrophotometer and clay content is better predicted using the readily available dual-type vis-NIR spectrophotometer. The coefficients of determination (R2) and root mean squared error (RMSE) were determined to be most favorable for clay (0.82 and 78 g kg-1) and sand (0.82 and 103 g kg-1), respectively. The ability to predict SOC content precisely was not particularly good for the dataset of soils used in this study with an R2 and RMSE of 0.54 and 4.1 g kg-1. The tested method demonstrated that both portable mid-IR and vis-NIR spectrophotometers were comparable in predicting soil texture on a large soil dataset collected from agricultural fields in four Canadian provinces.

Effect of inorganic additives (rock phosphate, PR and boron waste, BW) on the passivation of Cu, Zn during pig manure composting.

The bioavailability of heavy metals in compost is critical for their agronomic value. The effect of inorganic additives (rock phosphate, PR and boron waste, BW) on Copper (Cu) and Zinc (Zn) bioavailability during co-compost of swine manure and rice straw was assessed using sequential extraction procedure (European Community Bureau of Reference). The result showed that both additives, applied at rates of 2.5%-7.5% (w/w) could promote the change of exchangeable Cu and reducible Cu into oxidizable Cu, thereby reducing their bioavailability factor (BF) by 15.5%-47.2%. While additives provided no significant reduction in BF of Zn, the shift from exchangeable Zn into reducible Zn can still reduce the mobility of Zn. Based on redundancy analysis (RDA), organic matter (OM) and electrical conductivity (EC) were identified as the most important controlling factors for redistribution of Cu and Zn fractions during composting. The inorganic additives strengthened the passivation of Cu and Zn bioavailability by stimulating OM degradation. The 7.5% (w/w) rock phosphate showed best passivating effect on the bioavailability of Cu.

Biochar applied to soil under wastewater irrigation remained environmentally viable for the second season of potato cultivation.

The environmental effectiveness of plantain peel biochar in the second season of its application to soil was studied using outdoor lysimeters (0.45 m diameter x 1.0 m height) packed with sandy soil, cultivated with potatoes (Solanum tuberosum) and irrigated with wastewater. Biochar (1% w/w) was amended in the soil one-time in the first season. For two seasons, the biochar improved the soil properties, immobilized the heavy metals in the soil, and reduced their uptake by the crop. The CEC of the biochar-amended soil (WW + B) for example, as compared to the unamended treatment (WW-B), was significantly higher (p<0.05; >65%) for both seasons due to higher pH which controls the availability of cations in soils, influencing their CECs. The soil sampled in the second season showed accumulation of all the heavy metals in the topsoil, while only Zn, Pb and Fe moved to the 0.1 m depth. The Fourier transform infra-red spectra of the soil and soil-biochar mix were similar and suggested that oxygen-containing functional groups were partly responsible for binding the heavy metals. The heavy metals translocated to all the potato parts (flesh, peel, root, stem and leaves). The concentrations of the heavy metals in potato parts under freshwater were lower than those under wastewater irrigated condition. After the second season of being in the soil, biochar significantly reduced (p < 0.05) the concentrations of Cd, Cu, Cr, Pb and Zn in the edible flesh suggesting that biochar immobilized wastewater-laden heavy metals in soil and reduced their uptake in potatoes for at least two seasons.

Organic matter, a critical factor to immobilize phosphorus, copper, and zinc during composting under various initial C/N ratios.

The status of heavy metals and the P fractions in compost affects their environmental risk. The present study investigated the effects of different initial carbon to nitrogen (C/N) ratios (15, 22, 27) on redistribution of Cu, Zn, and P fractions during composting. The results showed that the composting process transformed Cu, Zn and P from mobile fractions to more stable fractions. Compost with an initial C/N of 22 showed the most effective immobilization of Cu, Zn and P because of yielding greatest degree of polymerization. Multivariate statistical analysis identified organic matter as the most critical factor for explaining the redistribution of Cu, Zn, and P fractions in composting. However, the degree of organic matter degradation (organic matter content and Humic acid/Fulvic acid) better explained the change of bioavailability factor for Cu and the mobility of P during composting. This research provided guidance for providing technology to reduce environmental risk in compost.

Effect of biochar on heavy metal accumulation in potatoes from wastewater irrigation.

In many developing countries water scarcity has led to the use of wastewater, often untreated, to irrigate a range of crops, including tuber crops such as potatoes (Solanum tuberosum L.). Untreated wastewater contains a wide range of contaminants, including heavy metals, which can find their way into the edible part of the crop, thereby posing a risk to human health. An experiment was undertaken to elucidate the fate and transport of six water-borne heavy metals (Cd, Cr, Cu, Fe, Pb and Zn), applied through irrigation water to a potato (cv. Russet Burbank) crop grown on sandy soil, having either received no biochar amendment or having top 0.10 m of soil amended with 1% (w/w) plantain peel biochar. A non-amended control, irrigated with tap water, along with the two contaminated water treatments were replicated three times in a completely randomized design carried out on nine outdoor PVC lysimeters of 1.0 m height and 0.45 m diameter. The potatoes were planted, irrigated at 10-day intervals, and leachate then collected. Soil samples collected two days after each irrigation showed that all heavy metals accumulated in the surface soil; Fe, Pb and Zn were detected at 0.1 m depth, while only Fe was detected at 0.3 m depth. Heavy metals were not detected in the leachate. Tested individually, all portions of the potato plant (tuber flesh, peel, leaf, stem and root) bore heavy metals. Biochar-amended soil significantly reduced only Cd and Zn concentrations in tuber flesh (69% and 33%, respectively) and peel compared to the non-amended wastewater control (p < 0.05). Heavy metal concentrations were significantly lower in the tuber flesh than in the peel, suggesting that when consuming potatoes grown under wastewater irrigation, the peel poses a higher health risk than the flesh.

Effect of biochar on fate and transport of manure-borne estrogens in sandy soil.

The feasibility of using two types of biochars to reduce steroid hormone pollution from poultry and swine manure application on agricultural land was evaluated. The sorption affinity and desorption resistance of softwood and hardwood biochars were also determined for two estrogen hormones, 17ß-estradiol (E2) and its primary metabolite estrone (E1). The softwood and hardwood biochars demonstrated high retention capacity for both estrogens. The effective distribution coefficient (Kdeff) of soil-softwood-derived biochar (SBS450) was significantly higher than soil-hardwood-derived biochar (SBH750), indicating the stronger sorption affinity of SBS450 for estrogens. To validate the laboratory results, a field lysimeter experiment was conducted to study the fate and transport of E2 and E1 in soil and leachate in the presence of 1% softwood-biochar (BS450) in topsoil and to compare it with soil without any amendments. The spatio-temporal distribution of both estrogens was monitored at four depths over a 46-day period. The lysimeters, in which the surface layer of soil was amended with biochar, retained significantly higher concentrations of both estrogen hormones. Although they leached through the soil and were detected in leachates, collected at 1.0m depth, the concentrations were significantly lower in the leachate collected from biochar-amended lysimeters. The result confirmed the efficacy of biochar amendment as a remediation technique to alleviate the manure-borne hormonal pollution of groundwater.

Integrating natural and engineered remediation strategies for water quality management within a low-impact development (LID) approach.

The objective of this paper is to demonstrate an interdisciplinary strategy combining both engineering- and biology-based approaches for stormwater and wastewater treatment. The work involves a novel and environmentally friendly surface material that can withstand urban load over its design service life, allows preliminary treatment through filtration, and diverts water to the subsurface to conduct secondary treatment below the surface through phytoremediation via the extensive rooting systems of trees. The present study highlights an interdisciplinary low-impact development (LID) approach developed for a polluted industrial wastewater site, for a cleaner and greener environment. The LID system involves (i) rhizofiltration and phytoremediation methods for removing heavy metals and organic pollutants using a hybrid poplar and aspen species; (ii) porous infrastructure produced using industrial waste, referred to as geopolymer pavers; and (iii) use of Silva cells as a tree-friendly and load support system. The design of the pavers over the Silva cells is innovative as it can deal with rainwater runoff and urban transportation loads simultaneously. The proposed system has the ability to extract heavy metals that are common in urban runoff or domestic and industrial effluents thus preserving the ecosystem naturally. The test site is only 15 m2, but designed for a water-retention capacity of 2 m3 (roughly 1:100 year design volume draining a 10 × 10 m parking lot), and remediation levels for Cu and Zn are expected to reach 180 mg/kg dry weight and 1200 mg/kg dry weight, respectively.

Lethal and sub-lethal effects of triclosan toxicity to the earthworm Eisenia fetida assessed through GC-MS metabolomics.

Triclosan (TCS) is a ubiquitous contaminant in municipal biosolids, which has also been detected in soils and earthworms sampled from agricultural fields amended with biosolids. The goal of this study was to evaluate the toxicity of TCS to earthworms using a metabolomics-based approach for an improved interpretation of toxicity. Toxicity of TCS was assessed using the OECD Method 207 filter paper contact test measuring the endpoints of weight loss, mortality, and ten metabolites determined by GC-MS. Eight earthworms were exposed as individual replicates to six concentrations of triclosan (0, 0.0001, 0.001, 0.01, 0.1, and 1mg TCS cm-2) on filter paper, with mortality assessed after 6, 24 and 48h. Mortalities were first observed at 24h, with 100% mortality in the 1 and 0.1mgcm-2 treatments. Worms at 1mgcm-2 lost most of their coelomic fluid before they could be sampled. The 48h LC50 for triclosan was estimated to be 0.006 and 0.008mgcm-2 by a linear and logistic model, respectively. Based on the LC50, triclosan is relatively more toxic to earthworms than a number of other emerging contaminants, but is less toxic than other chlorophenols and many pesticides. Alanine, valine, leucine, serine, phenylalanine, putrescine, spermidine, mannitol, and inositol were significantly different between treatments, although changes were most often associated with mortality rather than triclosan exposure. An increase in putrescine and decrease in amino acids, polyols, and spermidine were associated with mortality, suggesting decomposition had begun. Principal components analysis did not reveal evidence of metabolic impacts at sub-lethal concentrations. However, there were changes in the pattern of correlations between metabolite pairs in surviving worms at both 0.0001 and 0.001mgcm-2 exposure compared to the control.

Can nitrate contaminated groundwater be remediated by optimizing flood irrigation rate with high nitrate water in a desert oasis using the WHCNS model?

Nitrate contamination of groundwater is an environmental concern in intensively cultivated desert oases where this polluted groundwater is in turn used as a major irrigation water resource. However, nitrate fluxes from root zone to groundwater are difficult to monitor in this complex system. The objectives of this study were to validate and apply the WHCNS (soil Water Heat Carbon Nitrogen Simulator) model to simulate water drainage and nitrate leaching under different irrigation and nitrogen (N) management practices, and to assess the utilization of groundwater nitrate as an approach to remediate nitrate contaminated groundwater while maintain crop yield. A two-year field experiment was conducted in a corn field irrigated with high nitrate groundwater (20 mg N L(-1)) in Alxa, Inner Mongolia, China. The experiment consisted of two irrigation treatments (Istd, standard, 750 mm per season; Icsv, conservation, 570 mm per season) factorially combined with two N fertilization treatments (Nstd, standard, 138 kg ha(-1); Ncsv, conservation, 92 kg ha(-1)). The validated results showed that the WHCNS model simulated values of crop dry matter, yield, soil water content and soil N concentration in soil profile all agreed well with the observed values. Compared to the standard water management (Istd), the simulated drainage and nitrate leaching decreased about 65% and 59%, respectively, under the conservation water management (Icsv). Nearly 55% of input N was lost by leaching under the IstdNstd and IstdNcsv treatments, compared to only 26% under the IcsvNstd and IcsvNcsv treatments. Simulations with more than 240 scenarios combing different levels of irrigation and fertilization indicated that irrigation was the main reason leading to the high risk of nitrate leaching, and the nitrate in irrigation groundwater can be best utilized without corn yield loss when the total irrigation was reduced from the current 750 mm to 491 mm. This reduced irrigation rate facilitated the use of approximately 42 kg N ha(-1) yr(-1) of nitrate from groundwater, which would gradually improve the groundwater quality. Future field studies on nitrate leaching in this area are suggested to investigate water and N dynamics under irrigation rates near 490 mm per season.

Bioavailability of Sodium and Trace Metals under Direct and Indirect Effects of Compost in Urban Soils.

The contamination of urban soil with sodium (Na) and trace metals can be one of the major concerns for groundwater contamination and street tree health. The bioavailability of Na, copper (Cu), zinc (Zn), cadmium (Cd), and lead (Pb) in urban soil amended with 0, 5, and 10% w/w compost was evaluated at none, medium, and high contamination levels of soil mixtures. The relationship between soil properties, compost addition, contamination level and metal uptake by barley ( L.) was determined using multivariate linear regression and path analysis. The results indicated the direct negative effect of compost on metal absorption possibly through specific complexation for Cu, Zn, Cd, and Pb. Compost can also affect the absorption of Na and Cd indirectly by means of cation exchange capacity (CEC) and pH. The degree of soil contamination with metals can affect the competition of cations for the complexing sites of the soil mixtures and, therefore, can induce changes in metal availability for plants. Compost addition to the soil also increased nutrient availability, except for ammonium (NH) and nitrate (NO). We concluded that in the short term, the addition of compost significantly reduced metal bioavailability and improved nutrient availability. However, more studies are required to monitor the long-term ability of the compost to reduce Na and trace metal bioavailability in urban soil.

Using causal loop diagrams for the initialization of stakeholder engagement in soil salinity management in agricultural watersheds in developing countries: a case study in the Rechna Doab watershed, Pakistan.

Over the course of the last twenty years, participatory modeling has increasingly been advocated as an integral component of integrated, adaptive, and collaborative water resources management. However, issues of high cost, time, and expertise are significant hurdles to the widespread adoption of participatory modeling in many developing countries. In this study, a step-wise method to initialize the involvement of key stakeholders in the development of qualitative system dynamics models (i.e. causal loop diagrams) is presented. The proposed approach is designed to overcome the challenges of low expertise, time and financial resources that have hampered previous participatory modeling efforts in developing countries. The methodological framework was applied in a case study of soil salinity management in the Rechna Doab region of Pakistan, with a focus on the application of qualitative modeling through stakeholder-built causal loop diagrams to address soil salinity problems in the basin. Individual causal loop diagrams were developed by key stakeholder groups, following which an overall group causal loop diagram of the entire system was built based on the individual causal loop diagrams to form a holistic qualitative model of the whole system. The case study demonstrates the usefulness of the proposed approach, based on using causal loop diagrams in initiating stakeholder involvement in the participatory model building process. In addition, the results point to social-economic aspects of soil salinity that have not been considered by other modeling studies to date.

Vertical soil profiling using a galvanic contact resistivity scanning approach.

Proximal sensing of soil electromagnetic properties is widely used to map spatial land heterogeneity. The mapping instruments use galvanic contact, capacitive coupling or electromagnetic induction. Regardless of the type of instrument, the geometrical configuration between signal transmitting and receiving elements typically defines the shape of the depth response function. To assess vertical soil profiles, many modern instruments use multiple transmitter-receiver pairs. Alternatively, vertical electrical sounding can be used to measure changes in apparent soil electrical conductivity with depth at a specific location. This paper examines the possibility for the assessment of soil profiles using a dynamic surface galvanic contact resistivity scanning approach, with transmitting and receiving electrodes configured in an equatorial dipole-dipole array. An automated scanner system was developed and tested in agricultural fields with different soil profiles. While operating in the field, the distance between current injecting and measuring pairs of rolling electrodes was varied continuously from 40 to 190 cm. The preliminary evaluation included a comparison of scan results from 20 locations to shallow (less than 1.2 m deep) soil profiles and to a two-layer soil profile model defined using an electromagnetic induction instrument.

Fate and transport of monensin in the presence of nonionic surfactant Brij35 in soil.

As fresh water is a limited resource in many parts of the world, the use of wastewater for irrigation has become an important alternative. Therefore, many countries facing a water deficit, use partially treated, or even untreated, wastewater. This may increase the input of many contaminants into the environment. In the present study, we investigated the effect of using surfactant rich water in irrigation on the mobility of the most commonly-used veterinary antibiotic, monensin. Nine PVC lysimeters, 1.0m long×0.45 m diameter, were packed with a sandy soil to a bulk density of 1.35 Mg m(-3). Cattle manure, containing monensin, was applied at the surface of the lysimeters at the recommended rate of 10t/ha. Each of three aqueous Brij 35 solutions, 0, 0.5 and 5 g L(-1), was applied to the lysimeters in triplicate. Over a 90 day period, soil and leachate samples were collected and analyzed. The results of the laboratory sorption experiment showed that when the nonionic surfactant Brij 35 is present, the sorption coefficient of monensin was reduced significantly from 120.22 mL g(-1) in the aqueous medium to 112.20, 100 and 63.09 mL g(-1) with Brij35 concentrations of 0.25, 2.5 and 5 g L(-1), respectively. The lysimeter results indicated a significant downward movement of monensin at depths of 60 cm in the soil profile and leachate in the presence of the surfactant. Thus, the continuous use of poor quality water could influence the transport of monensin in agricultural soils, and consequently, pose a risk for groundwater pollution.

Near-infrared spectral image analysis of pork marbling based on Gabor filter and wide line detector techniques.

Marbling is an important quality attribute of pork. Detection of pork marbling usually involves subjective scoring, which raises the efficiency costs to the processor. In this study, the ability to predict pork marbling using near-infrared (NIR) hyperspectral imaging (900-1700 nm) and the proper image processing techniques were studied. Near-infrared images were collected from pork after marbling evaluation according to current standard chart from the National Pork Producers Council. Image analysis techniques-Gabor filter, wide line detector, and spectral averaging-were applied to extract texture, line, and spectral features, respectively, from NIR images of pork. Samples were grouped into calibration and validation sets. Wavelength selection was performed on calibration set by stepwise regression procedure. Prediction models of pork marbling scores were built using multiple linear regressions based on derivatives of mean spectra and line features at key wavelengths. The results showed that the derivatives of both texture and spectral features produced good results, with correlation coefficients of validation of 0.90 and 0.86, respectively, using wavelengths of 961, 1186, and 1220 nm. The results revealed the great potential of the Gabor filter for analyzing NIR images of pork for the effective and efficient objective evaluation of pork marbling.

Sorption/desorption behavior of oxytetracycline and sulfachloropyridazine in the soil water surfactant system.

Sorption/desorption of antibiotics, oxytetracycline (OTC), and sulfachloropyridazine (SCP) was investigated in the presence of a nonionic surfactant Brij35. Batch sorption experiments indicated that Freundlich equation fits sorption isotherms well for OTC. The sorption coefficients, KF, values were computed as 23.55 mL g(−1) in the absence of Brij35 and 25.46 mL g(−1) in the presence of Brij35 in the monomer form (below critical micelle concentration CMC, of 74 mg L(−1)). However, the KF values reduced to 12.76 mL g(−1) in the presence of Brij35 at 2.5 g L(−1). Therefore, irrigation with surfactant-rich water may increase the leaching potential of OTC. In the case of SCP, the KF value, in the absence of Brij35, was 19.95 mL g(−1). As a result of increasing the concentration of Brij35 to 0.25 g L(−1) (about 2.5 CMC), KF values first increased and reached a maximum value of 95.49 mL g(−1) and then reduced to 66.06 mL g(−1), at surfactant concentration of 5 g L(−1). Unlike OTC, the presence of surfactant in irrigation water is likely to decrease SCP leaching. In the case of OTC, hysteresis was found at Brij35 concentrations below CMC. However, OTC desorbed readily from soil (no hysteresis) at Brij35 concentrations above CMC. In the case of SCP, no hysteresis was found in the presence of the surfactant, both below and above CMC. Further, the obtained values of the efficiency coefficient (E), reveals that Brij35 had the potential to release more OTC from the soil (E > 1) as compared to SCP (E < 1). From these results, it can be concluded that regular use of manure on agricultural soils, especially in regions where poor quality irrigation water is used, can increase OTC contamination of water resources.

Trace metal contamination influenced by land use, soil age, and organic matter in montreal tree pit soil.

The short life span of many street trees in the Montreal downtown area may be due in part to higher than standard concentrations of trace metals in the tree pit soils. The effects of land use, soil organic matter, and time since tree planting in a given tree pit (soil age) were studied with respect to the total concentration of trace metals (Cr, Ni, Cu, Zn, Cd, and Pb) in soil collected from tree pits on commercial and residential streets. Contingency table analysis and multiple linear regression were applied to study how these variables were related to the total concentrations of trace metals in soil. Other variables, such as pH, street width, distance of the tree pit from the curb, and tree pit volume, were also used as input to statistical analysis to increase the analysis' explanatory power. Significantly higher concentrations of Cu, Cd, Zn, and Pb were observed in soils from commercial streets, possibly as a result of heavier traffic as compared with residential streets. Soil organic matter was positively correlated with the concentrations of Cu and Pb, probably due to the ability of organic matter to retain these trace metals. Nickel, Cu, Zn, Cd, and Pb were positively correlated with the soil age presumably because trace metals accumulate in the tree pit soil over time. This knowledge can be helpful in providing soil quality standards aimed at improving the longevity of downtown street trees.

Effect of nonionic surfactant Brij 35 on the fate and transport of oxytetracycline antibiotic in soil.

In many parts of the world, river water is used for irrigation. Treated, partially treated, and even untreated water from wastewater treatment plants is discharged directly into rivers, thereby degrading the quality of the water. Consequently, irrigation water may contain surfactants which may affect the fate and transport of chemicals such as pesticides and antibiotics in agricultural soils. A field lysimeter study was undertaken to investigate the effect of the nonionic surfactant, Brij 35, on the fate and transport of an antibiotic, Oxytetracycline, commonly used in cattle farms. Nine PVC lysimeters, 1.0 m long × 0.45 m diameter, were packed with a sandy soil to a bulk density of 1.35 Mg m(-3). Cattle manure, containing Oxytetracycline, was applied at the surface of the lysimeters at the recommended rate of 10 t/ha. Each of three aqueous Brij 35 solutions, 0, 0.5 and 5 g L(-1) (i.e., 'good,' 'poor' and 'very poor' quality irrigation water) were each applied to the lysimeters in triplicate. Over a 90 day period, soil and leachate samples were collected and analyzed. Batch experiment results showed that the presence of the nonionic surfactant Brij 35 significantly reduced the sorption coefficient of OTC from 23.55 mL g(-1) in the aqueous medium to 19.49, 12.49 and 14.53 in the presence of Brij 35 at concentrations of 0.25, 2.5 and 5 g L(-1), respectively. Lysimeter results indicted the significant downward movement of OTC at depths of 60 cm into soil profile and leachate in the presence of surfactant. Thus, the reuse of wastewater containing surfactants might enhance the mobility of contaminants and increase ground water pollution.

Sorption and desorption of salinomycin sodium in clay, loamy sand, and sandy soils.

Salinomycin sodium (BIO-COX) is polyether ionophore, commonly used in the poultry industries for the prevention of coccidial infections and promotion of growth. Salinomycin sodium (SAL-Na) is very toxic, and may be fatal, if swallowed, inhaled, or absorbed through the skin than many other antibiotics, thus evaluating their fate in the soil environment is of importance. Sorption of SAL-Na was measured in clay, loamy sand, and sandy soil at different pH 4, 7, and 9, and desorption with phosphate buffer (pH 7) using batch equilibration technique. SAL-Na was sorbed by all the soils studied, the sorption of SAL-Na by the sandy soil increased as the pH decreased, while the sorption of salinomycin in clay and loamy sand soil increased as the pH increased. Desorption of salinomycin from the soil with phosphate buffer (pH 7) over the 24 h period was 80-95% of the amount added. The similar trend was observed in desorption with pH 4, 7 and at different concentrations and slight less desorption was observed in pH 9. When compared to clay and loamy sand soil, sandy soil was recorded maximum (95%) desorption.

The effect of composting on the degradation of a veterinary pharmaceutical.

Composting has been identified as a viable means of reducing the environmental impact of antibiotics in manure. The focus of the present study is the potential use of composting on the degradation of salinomycin in manure prior to its field application. Manure contaminated with salinomycin was collected from a poultry farm and adjusted to a C:N ratio of 25:1 with hay material. The manure was composted in three identical 120 L plastic containers, 0.95 m height x 0.40 m in diameter. The degradation potential for salinomycin was also ascertained under open heap conditions for comparison (control). Salinomycin was quantified on HPLC with a Charged Aerosol Detector, at an interval of every 3 days. The salinomycin level in the compost treatment decreased from 22 mg kg(-1) to 2 x 10(-5) microg kg(-1) over 38 days. The corresponding decrease in the control was from 27.5 mg kg(-1) to 24 microg kg(-1). The changes in pH, EC (dS m(-1)), temperature, total kjeldahl nitrogen (TKN), total potassium (TK), total phosphorus (TP) and carbon content in both the composting and the control samples were monitored and found to be different in compost as compared to the control. During the composting process, the loss of TKN was 36%, which was substantially lower than corresponding loss of 60% in the control. The loss of carbon was 10% during composting, whereas the loss in the control was 2%. In composting, the temperature modulated from 27 degrees C (initially) to a high of 62.8 degrees C (after 4 days), and then declined to 27.8 degrees C at the end of 38 days. On the basis of the results obtained in this study, it appears that the composting technique is effective in reducing salinomycin in manure.

Three-dimensional visualization and quantification of non-aqueous phase liquid volumes in natural porous media using a medical X-ray Computed Tomography scanner.

This study demonstrates the capabilities of a typical medical X-ray Computed Tomography (CT) scanner to non-destructively quantify non-aqueous phase liquid (NAPL) volumes, saturation levels, and three-dimensional spatial distributions in packed soil columns. Columns packed with homogeneous sand, heterogeneous sand, or natural soil, were saturated with water and injected with known quantities of gasoline or tetrachloroethene and scanned. A methodology based on image subtraction was implemented for computing soil porosity and NAPL volumes in each 0.35 mm x 0.35 mm x 1 mm voxel of the columns. Elimination of sample positioning errors and instrument drift artifacts was essential for obtaining reliable estimates of above parameters. The CT data-derived total NAPL volume was in agreement with the measured NAPL volumes injected into the columns. CT data-derived NAPL volume is subject to a 2.6% error for PCE and a 15.5% error for gasoline, at average NAPL saturations as low as 5%, and is mainly due to instrument noise. Non-uniform distributions of NAPL due to preferential flow, and accumulation of NAPL above finer-grained layers could be observed from the data on 3-D distributions of NAPL volume fractions.