RESUMEN
In the present study, a multilayer, high-barrier, thin blown film based on a polybutylene adipate terephthalate (PBAT) blend with polyhydroxyalkanoate (PHA), and composed of four layers including a cellulose nanocrystal (CNC) barrier layer and an electrospun poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) hot-tack layer, was characterized in terms of the surface roughness, surface tension, migration, mechanical and peel performance, barrier properties, and disintegration rate. The results showed that the film exhibited a smooth surface. The overall migration tests showed that the material is suitable to be used as a food contact layer. The addition of the CNC interlayer had a significant effect on the mechanical properties of the system, drastically reducing the elongation at break and, thus, the flexibility of the material. The film containing CNCs and electrospun PHBV hot-tack interlayers exhibited firm but not strong adhesion. However, the multilayer was a good barrier to water vapor (2.4 ± 0.1 × 10-12 kg·m-2·s-1·Pa-1), and especially to oxygen (0.5 ± 0.3 × 10-15 m3·m-2·s-1·Pa-1), the permeance of which was reduced by up to 90% when the CNC layer was added. The multilayer system disintegrated completely in 60 days. All in all, the multilayer system developed resulted in a fully compostable structure with significant potential for use in high-barrier food packaging applications.
RESUMEN
This study investigates the unique morphology and mechanical properties of multi-jet electrospun cashew gum (CG) when combined with high-molecular-weight polyethylene oxide (PEO) and glycerol. Cashew gum (CG) is a low-cost, non-toxic heteropolysaccharide derived from Anacardium occidentale trees. Initially, the electrospinnability of aqueous solutions of cashew gum alone or in combination with PEO was evaluated. It was found that cashew gum alone was not suitable for electrospinning; thus, adding a small quantity of PEO was needed to create the necessary molecular entanglements for fiber formation. By using a single emitter with a CG:PEO ratio of 85:15, straight and smooth fibers with some defects were obtained. However, additional purification of the cashew gum solution was needed to produce more stable and defect-free straight and smooth fibers. Additionally, the inclusion of glycerol as a plasticizer was required to overcome material fragility. Interestingly, when the optimized formulation was electrospun using multiple simultaneous emitters, thicker aligned fiber bundles were achieved. Furthermore, the resulting oriented fiber mats exhibited unexpectedly high elongation at break under ambient conditions. These findings underscore the potential of this bio-polysaccharide-based formulation for non-direct water contact applications that demand elastic properties.
RESUMEN
Thermal energy storage (TES) plays an important role in industrial applications with intermittent generation of thermal energy. In particular, the implementation of latent heat thermal energy storage (LHTES) technology in industrial thermal processes has shown promising results, significantly reducing sensible heat losses. However, in order to implement this technology, a proper selection of materials is important. In this study, a new multi-criteria phase change material (PCM) selection methodology is presented, which considers relevant factors from an application and material handling point of view, such as hygroscopicity, metal compatibility (corrosion), level hazard, cost, and thermal and atmospheric stability. The methodology starts after setting up the system requirements where the PCM will be used, then a material screening is able to find all possible candidates that are listed with all available properties as listed before. Then, a color map is produced, with a qualitative assessment of material properties drawbacks, hazard level, melting enthalpy, and price. The experimentation starts with a preliminary set of tests on hygroscopicity and one-week corrosion test, which allows disregarding PCMs and selecting a short list of potential PCMs that would need further characterization before the final selection.
RESUMEN
Surgical site infections (SSI) occur very frequently during post-operative procedures and are often treated with oral antibiotics, which may cause some side effects. This type of infection could be avoided by encapsulating antimicrobial/anti-inflammatory drugs within the surgical suture materials so that they can more efficiently act on the site of action during wound closure, avoiding post-operative bacterial infection and spreading. This work was aimed at developing novel electrospun bio-based anti-infective fibre-based yarns as novel suture materials for preventing surgical site infections. For this, yarns based on flying intertwined microfibres (1.95 ± 0.22 µm) were fabricated in situ during the electrospinning process using a specially designed yarn collector. The electrospun yarn sutures (diameter 300-500 µm) were made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with different contents of 3HV units and contained ciprofloxacin hydrochloride (CPX) as the antimicrobial active pharmaceutical ingredient (API). The yarns were then analysed by scanning electron microscopy, Fourier transform infrared spectroscopy, wide-angle X-ray scattering, differential scanning calorimetry, and in vitro drug release. The yarns were also analysed in terms of antimicrobial and mechanical properties. The material characterization indicated that the varying polymer molecular architecture affected the attained polymer crystallinity, which was correlated with the different drug-eluting profiles. Moreover, the materials exhibited the inherent stiff behaviour of PHBV, which was further enhanced by the API. Lastly, all the yarn sutures presented antimicrobial properties for a time release of 5 days against both Gram-positive and Gram-negative pathogenic bacteria. The results highlight the potential of the developed antimicrobial electrospun yarns in this study as potential innovative suture materials to prevent surgical infections.
RESUMEN
Bioactives are functional molecules that pose several challenges, including poor solubility, low permeability, and low chemical, biochemical, or process stability, resulting in reduced functionality and bioavailability [...].
RESUMEN
Sustainable active food packaging is essential to reduce the use of plastics, preserve food quality and minimize the environmental impact. Humic substances (HS) are rich in redox-active compounds, such as quinones, phenols, carboxyl, and hydroxyl moieties, making them functional additives for biopolymeric matrices, such as poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV). Herein, composites made by incorporating different amounts of HS into PHBV were developed using the electrospinning technology and converted into homogeneous and continuous films by a thermal post-treatment to obtain a bioactive and biodegradable layer which could be part of a multilayer food packaging solution. The morphology, thermal, optical, mechanical, antioxidant and barrier properties of the resulting PHBV-based films have been evaluated, as well as the antifungal activity against Aspergillus flavus and Candida albicans and the antimicrobial properties against both Gram (+) and Gram (-) bacterial strains. HS show great potential as natural additives for biopolymer matrices, since they confer antioxidant, antimicrobial, and antifungal properties to the resulting materials. In addition, barrier, optical and mechanical properties highlighted that the obtained films are suitable for sustainable active packaging. Therefore, the electrospinning methodology is a promising and sustainable approach to give biowaste a new life through the development of multifunctional materials suitable in the active bio-packaging.
Asunto(s)
Embalaje de Alimentos , Sustancias Húmicas , Ácidos Pentanoicos , Antifúngicos/farmacología , Antioxidantes/farmacología , PoliésteresRESUMEN
To determine the readmissions trends and the comorbidities of patients with heart failure that most influence hospital readmission rates. Heart failure (HF) is one of the most prevalent health problems as it causes loss of quality of life and increased health-care costs. Its prevalence increases with age and is a major cause of re-hospitalisation within 30 days after discharge. INCA study had observational and ambispective design, including 4,959 patients from 2000 to 2019, with main diagnosis of HF in Extremadura (Spain). The variables examined were collected from discharge reports. To develop the readmission index, capable of discriminating the population with higher probability of re-hospitalisation, a Competing-risk model was generated. Readmission rate have increased over the period under investigation. The main predictors of readmission were: age, diabetes mellitus, presence of neoplasia, HF without previous hospitalisation, atrial fibrillation, anaemia, previous myocardial infarction, obstructive pulmonary disease (COPD) and chronic kidney disease (CKD). These variables were assigned values with balanced weights, our INCA index showed that the population with values greater than 2 for men and women were more likely to be re-admitted. Previous HF without hospital admission, CKD, and COPD appear to have the greatest effect on readmission. Our index allowed us to identify patients with different risks of readmission.
Asunto(s)
Insuficiencia Cardíaca , Readmisión del Paciente , Readmisión del Paciente/estadística & datos numéricos , Readmisión del Paciente/tendencias , Insuficiencia Cardíaca/diagnóstico , Insuficiencia Cardíaca/epidemiología , Alta del Paciente/estadística & datos numéricos , España/epidemiología , Factores de Riesgo , Medición de Riesgo , Humanos , Masculino , FemeninoRESUMEN
B-cell chronic lymphocytic leukemia (B-CLL) is the most common type of leukemia in the Western world. Mutation in different genes, such as TP53 and ATM, and deletions at specific chromosomic regions, among which are 11q or 17p, have been described to be associated to worse disease prognosis. Recent research from our group has demonstrated that, contrary to what is the usual cancer development process through missense mutations, B-CLL is driven by the overexpression of the small GTPase RRAS2 in its wild-type form without activating mutations. Some mouse models of this disease have been developed to date and are commonly used in B-CLL research, but they present different disadvantages such as the long waiting period until the leukemia fully develops, the need to do cell engraftment or, in some cases, the fact that the model does not recapitulate the alterations found in human patients. We have recently described Rosa26-RRAS2fl/flxmb1-Cre as a new mouse model of B-CLL with a full penetrance of the disease. In this work, we have validated this mouse model as a novel tool for the development of new therapies for B-CLL, by testing two of the most broadly applied targeted agents: ibrutinib and venetoclax. This also opens the door to new targeted agents against R-RAS2 itself, an approach not yet explored in the clinic.
RESUMEN
BACKGROUND AND OBJECTIVES: Combination therapy with an immunomodulator (IMM) and an anti-TNF is commonly recommended in Crohn's disease (CD) and ulcerative colitis (UC) patients. However, little is known about relapse rates after therapeutic de-escalation. This study aimed to evaluate the risk of relapse in a cohort of UC and CD patients with long-standing clinical remission after discontinuation of IMM or anti-TNF and to identify predictive factors for relapse. METHODS: This retrospective study included patients with UC or CD on combination therapy and clinical remission for at least 6 months. IMM or anti-TNF was stopped upon physician decision. Primary objective was to evaluate the relapse rates after discontinuation of IMM or anti-TNF and to analyze predictors of relapse. RESULTS: The study included 88 patients, 48 patients (54.5%) discontinued IMM and 40 (45.5%) anti-TNF. During follow-up, relapse rates were 16.7% and 52.5% in the IMM discontinuation group and anti-TNF discontinuation group, respectively (p<0.001). Multivariate analysis showed that anti-TNF discontinuation (HR=3.01; 95% CI=1.22-7.43) and ileal CD location (HR=2.36; 95% CI=1.02-5.47) were predictive factors for relapse while inflammatory CD phenotype was a protective factor (HR=0.32; 95% CI=0.11-0.90). Reintroduction of anti-TNF upon relapse was effective and safe. CONCLUSION: Anti-TNF discontinuation led to significantly higher relapse rates compared to IMM discontinuation in UC and CD patients on combination therapy. Anti-TNF discontinuation and ileal CD location were identified as predictive factors for relapse while inflammatory CD phenotype was a protective factor. Retreatment after anti-TNF discontinuation was effective and safe.
RESUMEN
Hydrogenolysis of a series of alkyl sulfido-bridged tantalum(IV) dinuclear complexes [Ta(η5-C5Me5)R(µ-S)]2 [R = Me, nBu (1), Et, CH2SiMe3, C3H5, Ph, CH2Ph (2), p-MeC6H4CH2 (3)] has led quantitatively to the Ta(III) tetrametallic sulfide cluster [Ta(η5-C5Me5)(µ3-S)]4 (4) along with the corresponding alkane. Mechanistic information for the formation of the unique low-valent tetrametallic compound 4 was gathered by hydrogenation of the phenyl-substituted precursor [Ta(η5-C5Me5)Ph(µ-S)]2, which proceeds through a stepwise hydrogenation process, disclosing the formation of the intermediate tetranuclear hydride sulfide [Ta2(η5-C5Me5)2(H)Ph(µ-S)(µ3-S)]2 (5). Extending our studies toward tantalum alkyl precursors containing functional groups susceptible to hydrogenation, such as the allyl-and benzyl-substituted compounds [Ta(η5-C5Me5)(η3-C3H5)(µ-S)]2 and [Ta(η5-C5Me5)(CH2Ph)(µ-S)]2 (2), enables alternative reaction pathways en route to the formation of 4. In the former case, the dimetallic system undergoes selective hydrogenation of the unsaturated allyl moiety, forming the asymmetric complex [{Ta(η5-C5Me5)(η3-C3H5)}(µ-S)2{Ta(η5-C5Me5)(C3H7)}] (6) with only one propyl fragment. Species 2, in addition to the hydrogenation of one benzyl fragment and concomitant toluene release, also undergoes partial hydrogenation and dearomatization of the phenyl ring on the vicinal benzyl unity to give a η5-cyclohexadienyl complex [Ta2(η5-C5Me5)2(µ-CH2C6H6)(µ-S)2] (7). The mechanistic implications of the latter hydrogenation process are discussed by means of DFT calculations.
RESUMEN
Dragon's blood sap (DBS) obtained from the bark of Croton lechleri (Müll, Arg.) is a complex herbal remedy of pharmacological interest due to its high content in polyphenols, specifically proanthocyanidins. In this paper, electrospraying assisted by pressurized gas (EAPG) was first compared with freeze-drying to dry natural DBS. Secondly, EAPG was used for the first time to entrap natural DBS at room temperature into two different encapsulation matrices, i.e., whey protein concentrate (WPC) and zein (ZN), using different ratios of encapsulant material: bioactive compound, for instance 2:1 w/w and 1:1 w/w. The obtained particles were characterized in terms of morphology, total soluble polyphenolic content (TSP), antioxidant activity, and photo-oxidation stability during the 40 days of the experiment. Regarding the drying process, EAPG produced spherical particles with sizes of 11.38 ± 4.34 µm, whereas freeze-drying produced irregular particles with a broad particle size distribution. However, no significant differences were detected between DBS dried by EAPG or freeze-drying in TSP, antioxidant activity, and photo-oxidation stability, confirming that EAPG is a mild drying process suitable to dry sensitive bioactive compounds. Regarding the encapsulation process, the DBS encapsulated within the WPC produced smooth spherical microparticles, with average sizes of 11.28 ± 4.28 µm and 12.77 ± 4.54 µm for ratios 1:1 w/w and 2:1 w/w, respectively. The DBS was also encapsulated into ZN producing rough spherical microparticles, with average sizes of 6.37 ± 1.67 µm and 7.58 ± 2.54 µm for ratios 1:1 w/w and 2:1 w/w, respectively. The TSP was not affected during the encapsulation process. However, a slight reduction in antioxidant activity measured by DPPH was observed during encapsulation. An accelerated photo-oxidation test under ultraviolet light confirmed that the encapsulated DBS showed an increased oxidative stability in comparison with the non-encapsulated DBS, with the stability being enhanced for the ratio of 2:1 w/w. Among the encapsulating materials and according to the ATR-FTIR results, ZN showed increased protection against UV light. The obtained results demonstrate the potential of EAPG technology in the drying or encapsulation of sensitive natural bioactive compounds in a continuous process available at an industrial scale, which could be an alternative to freeze-drying.
Asunto(s)
Antioxidantes , Zeína , Proteína de Suero de Leche/químicaRESUMEN
Food quality is mainly affected by oxygen through oxidative reactions and the proliferation of microorganisms, generating changes in its taste, odor, and color. The work presented here describes the generation and further characterization of films with active oxygen scavenging properties made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) loaded with cerium oxide nanoparticles (CeO2NPs) obtained by electrospinning coupled to a subsequent annealing process, which could be used as coating or interlayer in a multilayer concept for food packaging applications. The aim of this work is to explore the capacities of these novel biopolymeric composites in terms of O2 scavenging capacity, as well as antioxidant, antimicrobial, barrier, thermal, and mechanical properties. To obtain such biopapers, different ratios of CeO2NPs were incorporated into a PHBV solution with hexadecyltrimethylammonium bromide (CTAB) as a surfactant. The produced films were analyzed in terms of antioxidant, thermal, antioxidant, antimicrobial, optical, morphological and barrier properties, and oxygen scavenging activity. According to the results, the nanofiller showed some reduction of the thermal stability of the biopolyester but exhibited antimicrobial and antioxidant properties. In terms of passive barrier properties, the CeO2NPs decreased the permeability to water vapor but increased the limonene and oxygen permeability of the biopolymer matrix slightly. Nevertheless, the oxygen scavenging activity of the nanocomposites showed significant results and improved further by incorporating the surfactant CTAB. The PHBV nanocomposite biopapers developed in this study appear as very interesting constituents for the potential design of new active organic recyclable packaging materials.
RESUMEN
We examine the extent to which exposure to higher relative COVID-19 mortality (RM), influences health system trust (HST), and whether changes in HST explain the perceived ease of compliance with pandemic restrictions during the COVID-19 pandemic. Drawing on evidence from two representative surveys covering all regions of 28 European countries before and after the first COVID-19 wave, and using a difference in differences strategy together with Coarsened Exact Matching (CEM), we document that living in a region with higher RM during the first wave of the pandemic increased HST. However, the positive effect of RM on HST is driven by individuals over 45 years of age, and the opposite effect is found among younger cohorts. Furthemore, we find that a higher HST reduces the costs of complying with COVID-19 restrictions, but only so long as excess mortality does not exceed the average by more than 20%, at which point the ease of complying with COVID-19 restrictions significantly declines, offsetting the positive effect of trust in the healthcare system. Our interpretation of these estimates is that a higher RM is interpreted as a risk signal among those over 45, and as a signal of health-care system failure among younger age individuals.
Asunto(s)
COVID-19 , Humanos , COVID-19/epidemiología , Pandemias , Confianza , Europa (Continente)/epidemiologíaRESUMEN
In this research, bio-based electrospun multilayered films for food packaging applications with good barrier properties and close to superhydrophobic behavior were developed. For this purpose, two different biopolymers, a low-melting point and fully bio-based synthetic aliphatic copolyamide 1010/1014 (PA1010/1014) and the microbially synthesized poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and food-contact-complying organomodified silica (SiO2) nanostructured microparticles, were processed by electrospinning. The production of the multilayer structure was finally obtained by means of a thermal post-treatment, with the aim to laminate all of the components by virtue of the so-called interfiber coalescence process. The so developed fully electrospun films were characterized according to their morphology, their permeance to water vapor and oxygen, the mechanical properties, and their water contact angle properties. Interestingly, the annealed electrospun copolyamide did not show the expected improved barrier behavior as a monolayer. However, when it was built into a multilayer form, the whole assembly exhibited a good barrier, an improved mechanical performance compared to pure PHBV, an apparent water contact angle of ca. 146°, and a sliding angle of 8°. Consequently, these new biopolymer-based multilayer films could be a bio-based alternative to be potentially considered in more environmentally friendly food packaging strategies.
RESUMEN
AIM: The study aimed to identify and compare aspects of the different Spanish regulations on the minimum conditions that nursing homes must meet and to compare whether these requirements significantly affect the price of a nursing home place in each region. METHODS: We analyzed and compared the 17 regional regulations that must be met by nursing homes in terms of equipment and social and healthcare staff and combined this information with regional information concerning the price and coverage of public and subsidized places in nursing homes. RESULTS: The study revealed significant regional inequality in physical facilities and human resources. However, the number of regulatory measures referring to the mandatory availability of physical space or specific material resources was not positively correlated with an increase in the price of a place in a public or subsidized nursing home. CONCLUSIONS: No unified regulations throughout Spain regulate the aspects that residential centers must comply with. There is a need to move towards a person-centered approach, providing an environment as close to home as possible. The regulation of minimum standards to be met by all nursing homes at the national level should not significantly impact prices.
Asunto(s)
Atención a la Salud , Casas de Salud , Humanos , Anciano , EspañaRESUMEN
In the present study, electrospun nanofibers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), a biodegradable polyester, containing natural deep eutectic solvents (NADES) were obtained and reported for the first time, exhibiting an unreported 3D morphology and enhanced charge retention properties. Choline chloride (ChCl)/urea/water in a molar ratio of 1:2:1 was used as the NADES model system. Electrospun nanofibers were produced from a 10 wt % solution of PHBV containing 26 wt % NADES with respect to the polymer and were deposited on different substrates, that is, aluminum foil and non-woven spunbond polypropylene (PP). The morphology and charge retention ability were characterized under different conditions and on different substrates. The attained fiber morphology for the NADES-containing mats showed an average fiber diameter of around 300 nm, whereas the pure PHBV polymer under the same conditions produced electrospun fibers of around 880 nm. However, the deposition of PHBV/ChCl/urea/water fibers resulted in a surprising macroscopic rugose 3D surface morphology made of aligned nanofibers when processed at 50% relative humidity (RH). The nanofiber grammages above which this 3D morphology, associated with NADES-induced charge retention, formed was found to be dependent on the substrate used and RH. This morphology was not seen at 20% RH nor when pure PHBV was produced. Charge stability studies revealed that PHBV/ChCl/urea/water nanofibers exhibited lasting charge retention, especially when sandwiched between spunbond polypropylene textiles. Finally, such multilayer structures containing a very thin double layer of PHBV/ChCl/urea/water fibers after corona treatment exhibited improved paraffin aerosol penetration, which was ascribed to the combination of thinner fibers and their charge retention capacity. The here-developed electrospun PHBV fibers containing NADES demonstrated for the first time a new potential application as electret filter media.
Asunto(s)
Secretasas de la Proteína Precursora del Amiloide , Protocolos de Quimioterapia Combinada Antineoplásica , Leucemia-Linfoma Linfoblástico de Células T Precursoras , Humanos , Línea Celular Tumoral , Dexametasona/farmacología , Leucemia-Linfoma Linfoblástico de Células T Precursoras/tratamiento farmacológico , Presenilina-1 , Linfocitos TRESUMEN
BACKGROUND: The transmission of monkeypox virus occurs through direct contact, but transmission through saliva or exhaled droplets and aerosols has not yet been investigated. We aimed to assess the presence of monkeypox virus DNA and infectious virus in saliva samples and droplets and aerosols exhaled from patients infected with monkeypox virus. METHODS: We did a cross-sectional study in patients with monkeypox confirmed by PCR who attended two health centres in Madrid, Spain. For each patient, we collected samples of saliva, exhaled droplets within a mask, and aerosols captured by air filtration through newly developed nanofiber filters. We evaluated the presence of monkeypox virus in the samples by viral DNA detection by quantitative PCR (qPCR) and isolation of infectious viruses in cell cultures. FINDINGS: Between May 18 and July 15, 2022, 44 patients with symptomatic monkeypox attended two health centres in Madrid and were included in the study. All were cisgender men, with a median age of 35·0 years (IQR 11·3). We identified high loads of monkeypox virus DNA by qPCR in 35 (85%) of 41 saliva samples. Infectious monkeypox virus was recovered from 22 (67%) of 33 saliva samples positive for monkeypox virus DNA. We also found a significant association between the number of affected cutaneous areas or general symptoms and the viral load present in saliva samples. Droplets exhaled from patients with monkeypox, detected inside a mask, contained monkeypox virus DNA in 32 (71%) of 45 samples, with two of the 32 positive samples showing the presence of the infectious virus. Monkeypox virus DNA in aerosols, collected from the medical consultation room, were detected in 27 (64%) of 42 samples, despite patients wearing an FFP2 mask during the visit. Infectious virus was not recovered from aerosol samples. High levels of monkeypox virus DNA were identified in aerosols collected from a hospital isolation room housing a patient with monkeypox. INTERPRETATION: The identification of high viable monkeypox virus loads in saliva in most patients with monkeypox and the finding of monkeypox virus DNA in droplets and aerosols warrants further epidemiological studies to evaluate the potential relevance of the respiratory route of infection in the 2022 monkeypox virus outbreak. FUNDING: EU, Consejo Superior de Investigaciones Científicas, and Ciberinfec.
Asunto(s)
Monkeypox virus , Mpox , Masculino , Humanos , Niño , Monkeypox virus/genética , Mpox/diagnóstico , Estudios Transversales , Saliva , España/epidemiología , Aerosoles , ADNRESUMEN
Venetoclax combination therapies are becoming the standard of care in acute myeloid leukemia (AML). However, the therapeutic benefit of these drugs in older/unfit patients is limited to only a few months, highlighting the need for more effective therapies. Protein phosphatase 2A (PP2A) is a tumor suppressor phosphatase with pleiotropic functions that becomes inactivated in â¼70% of AML cases. PP2A promotes cancer cell death by modulating the phosphorylation state in a variety of proteins along the mitochondrial apoptotic pathway. We therefore hypothesized that pharmacological PP2A reactivation could increase BCL2 dependency in AML cells and, thus, potentiate venetoclax-induced cell death. Here, by using 3 structurally distinct PP2A-activating drugs, we show that PP2A reactivation synergistically enhances venetoclax activity in AML cell lines, primary cells, and xenograft models. Through the use of gene editing tools and pharmacological approaches, we demonstrate that the observed therapeutic synergy relies on PP2A complexes containing the B56α regulatory subunit, of which expression dictates response to the combination therapy. Mechanistically, PP2A reactivation enhances venetoclax-driven apoptosis through simultaneous inhibition of antiapoptotic BCL2 and extracellular signal-regulated kinase signaling, with the latter decreasing MCL1 protein stability. Finally, PP2A targeting increases the efficacy of the clinically approved venetoclax and azacitidine combination in vitro, in primary cells, and in an AML patient-derived xenograft model. These preclinical results provide a scientific rationale for testing PP2A-activating drugs with venetoclax combinations in AML.
Asunto(s)
Leucemia Mieloide Aguda , Proteína Fosfatasa 2 , Humanos , Anciano , Proteína 1 de la Secuencia de Leucemia de Células Mieloides , Línea Celular Tumoral , Proteínas Proto-Oncogénicas c-bcl-2 , Leucemia Mieloide Aguda/genética , Compuestos Bicíclicos Heterocíclicos con Puentes/farmacología , Compuestos Bicíclicos Heterocíclicos con Puentes/uso terapéutico , ApoptosisRESUMEN
The COVID-19 pandemic and its mobility restrictions have been an external shock, influencing mental wellbeing. However, does risk exposure to COVID-19 affect the mental wellbeing effect of lockdowns? This paper examines the 'welcomed lockdown' hypothesis, namely the extent to which there is a level of risk where mobility restrictions are not a hindrance to mental wellbeing. We exploit the differential timing of exposure the pandemic, and the different stringency of lockdown policies across European countries and we focus on the effects on two mental health conditions, namely anxiety and depression. We study whether differences in the individual symptoms of anxiety and depression are explained by the combination of pandemic mortality and stringency of lockdown. We draw on an event study approach, complemented with a Difference-in-Difference (DiD), and Regression Discontinuity Design (RDD). Our estimates suggest an average increase in depression (3.95%) and anxiety (10%) symptoms relative to the mean level on the day that lockdown took effect. However, such effects are wiped out when a country's exhibits high mortality ('pandemic category 5'). Hence, we conclude that in an environment of high mortality, lockdowns no longer give rise to a reduction in mental wellbeing consistent with the 'welcome lockdown' hypothesis.