RESUMEN
In-betweening is a technique for generating transitions given start and target character states. The majority of existing works require multiple (often ≥ 10) frames as input, which are not always available. In addition, they produce results that lack diversity, which may not fulfill artists' requirements. Addressing these gaps, our work deals with a focused yet challenging problem: generating diverse and high-quality transitions given exactly two frames (only the start and target frames). To cope with this challenging scenario, we propose a bi-directional motion generation and stitching scheme which generates forward and backward transitions from the start and target frames with two adversarial autoregressive networks, respectively, and stitches them midway between the start and target frames. In contrast to stitching at the start or target frames, where the ground truth cannot be altered, there is no strict midway ground truth. Thus, our method can capitalize on this flexibility and generate high-quality and diverse transitions simultaneously. Specifically, we employ conditional variational autoencoders (CVAEs) to implement our autoregressive networks and propose a novel stitching loss to stitch the bi-directional generated motions around the midway point.
RESUMEN
A single-layer graphene metamaterial consisting of a horizontal graphene strip, four vertical graphene strips, and two graphene rings is proposed to realize tunable multi-plasma-induced transparency (MPIT) by the coupled mode theory and the finite-difference time-domain method. A switch with three modulation modes is realized by dynamically adjusting the Fermi level of graphene. Moreover, the effect of symmetry breaking on MPIT is investigated by controlling the geometric parameters of graphene metamaterials. Triple-PIT, dual-PIT, single-PIT can be transformed into each other. The proposed structure and results provide guidance for applications such as designing photoelectric switches and modulators.
RESUMEN
This paper proposes a novel and perfect absorber based on patterned graphene and vanadium dioxide hybrid metamaterial, which can not only achieve wide-band perfect absorption and dual-channel absorption in the terahertz band, but also realize their conversion by adjusting the temperature to control the metallic or insulating phase of VO2. Firstly, the absorption spectrum of the proposed structure is analyzed without graphene, where the absorption can reach as high as 100% at one frequency point (f = 5.956 THz) when VO2 is in the metal phase. What merits attention is that the addition of graphene above the structure enhances the almost 100% absorption from one frequency point (f = 5.956 THz) to a wide frequency band, in which the broadband width records 1.683 THz. Secondly, when VO2 is the insulating phase, the absorption of the metamaterial structure with graphene outperforms better, and two high absorption peaks are formed, logging 100% and 90.7% at f3 = 5.545 THz and f4 = 7.684 THz, respectively. Lastly, the adjustment of the Fermi level of graphene from 0.8 eV to 1.1 eV incurs an obvious blueshift of the absorption spectra, where an asynchronous optical switch can be achieved at fK1 = 5.782 THz and fK2 = 6.898 THz. Besides, the absorber exhibits polarization sensitivity at f3 = 5.545 THz, and polarization insensitivity at f4 = 7.684 THz with the shift in the polarization angle of incident light from 0° to 90°. Accordingly, this paper gives insights into the new method that increases the high absorption width, as well as the great potential in the multifunctional modulator.
RESUMEN
Double narrowband induced perfect absorption in the terahertz region is achieved in a graphene-dielectric-gold hybrid metamaterial, whose physical mechanism is analyzed using the coupled-mode theory (CMT), which agreed well with the finite-difference time-domain (FDTD) simulation. This study found that the Fermi level of graphene can be adjusted to improve the absorptivity when the refractive index (RI) nd of the chosen dielectric cannot achieve a good absorption effect. In addition, the blue shift of absorption spectrum can be used in the design of dual-frequency electro-optical switches, of which the modulation degree of amplitude (MDA) can reach as high as 94.05% and 93.41%, indicating that this is a very promising electro-optical switch. Most significantly, the RI sensing performance is investigated, which shows an ultra-high absorption sensitivity SA = 4.4°/RIU, wavelength sensitivity Sλ = 9.8°/RIU, and phase shift sensitivity Sφ = 2691°/RIU. At last, an interesting finding is that the two peaks (R1 and R2) of plasmon-induced absorption (PIA) show different polarization characteristics (insensitive or sensitive) to the incident light angle; this polarization-sensitive is particularly important for the PIT/PIA-based optical polarizers. Undoubtedly, this paper is of great significance to the research and design of terahertz photonic devices and sensors.
RESUMEN
While structural coloration has captured considerable interests across different areas in the past decades, the development of macroscopic objects with tailorable structural colors remains a challenge due to the difficulty of large-scale fabrication of finely ordered nanostructures and poor processability of their constituent materials. In this work, a type of photonic granular hydrogel is developed as a novel printable ink for constructing customized structural colored objects. The magnetochromatic ink exhibits dynamic properties such as shear thinning and self-healing, enabling direct writing of macroscopic structural colored patterns by extrusion 3D printing. Further, the modularity of the photonic ink allows additive color mixing, which obviates the need for arduous nano-synthesis and expands on the color abundance of structural colored materials in a simple yet efficient manner. These characteristics grant novel photonic inks with great applicability to a variety of fields including switchable color displays, sensors, etc.
RESUMEN
A simple monolayer graphene metamaterial based on silicon/silica substrates is proposed, and typical triple-plasmon-induced transparency (PIT) is realized in the terahertz band. The physical mechanism is analyzed by coupled mode theory (CMT), and the results of CMT agree well with the finite-difference time-domain simulation. A multimode electro-optical switch can be designed by dynamic tuning, and the modulation degrees of its resonant frequencies are 84.0%, 87.3%, 83.0%, 88.1%, and 76.7%. In addition, triple-PIT gradually degenerates into dual-PIT with a decrease in the length of one bright mode. Interestingly, the group index can reach 770 at Ef=0.8eV, which shows that it can be designed as a slow light device with extraordinary ability. Therefore, the results of this paper are of great significance to the research and design of electro-optical switches and slow light devices in the terahertz band.
RESUMEN
A terahertz-band metamaterial composed of multilayer patterned graphene is proposed and triple plasmon-induced transparency is excited by coupling three bright modes with one dark mode. The Lorentz curve calculated by the coupled-mode theory agrees well with the finite-difference time-domain results. Dynamic tuning is investigated by changing the Fermi level. Multimode electro-optics switching can be designed and achieved, and the amplitude modulations of four resonance frequencies are 94.3%, 92.8%, 90.7%, and 93%, respectively, which can realize the design of synchronous and asynchronous electro-optics switches. It is hoped that these results can provide theoretical support and guidance for the future design and application of photonic and optoelectronic devices.
RESUMEN
This study proposes a graphene metamaterial desensitized to the polarized angle to produce tunable quadruple plasmon-induced transparency (PIT). As a tool employed to explain the PIT, n-order coupled mode theory (CMT) is deduced for the first time and closely agrees with finite-difference time-domain (FDTD) simulations according to the quadruple PIT results in the case of n = 5. Additionally, the response of the proposed structure to the angle of polarized light is investigated. As a result, the Boltzmann function satisfied by the response of graphene strips to the polarization direction of incident light is proposed for the first time. Its property of polarization desensitization can be attributed to structural centrosymmetry, and conjugated variety which the Boltzmann functions result in. Therefore, a quintuple-mode modulation based on simultaneous electro-optical switch is realized by tuning Fermi levels within graphene. Its modulation degrees of amplitude and dephasing times are obtained. Given that the slow-light property is an important application of PIT, the n-order group index is thereby obtained. Hence, not only do the insights gained into polarization-desensitization structure provide new ideas for the design of novel optoelectronic devices, but also the results from the n-order CMT offer new research progress and references in theory.
RESUMEN
In this study, multilayer graphene metamaterials comprising graphene blocks and graphene ribbon are proposed to realize dynamic plasmon-induced transparence (PIT). By changing the position between the graphene blocks, PIT phenomenon will occur in different terahertz bands. Furthermore, PIT with a transparent window width of 1 THz has been realized. In addition, the PIT shows redshifts or blueshifts or disappears altogether upon changing the Fermi level of graphene, and hence a frequency selector from 3.91 to 7.84 THz and an electro-optical switch can be realized. Surprisingly, the group index of this structure can be increased to 469. Compared with the complex and fixed structure of previous studies, our proposed structure is simple and can be dynamically adjusted according to demands, which makes it a valuable platform for ideas to inspire the design of novel electro-optic devices.
RESUMEN
A mono-layer metamaterial comprising four graphene-strips and one graphene-square-ring is proposed herein to realize triple plasmon-induced transparency (PIT). Theoretical results based on the coupled mode theory (CMT) are in agreement with the simulation results obtained using the finite-difference time-domain (FDTD). An optical switch is investigated based on the characteristics of graphene dynamic modulation, with modulation degrees of the amplitude of 90.1%, 80.1%, 94.5%, and 84.7% corresponding to 1.905 THz, 2.455 THz, 3.131 THz, and 4.923 THz, respectively. Moreover, the proposed metamaterial is insensitive to the change in the angle of polarized light, for which the triple-PIT is equivalent in the cases of both x- and y-polarized light. The optical switch based on the proposed structure is effective not only for the linearly polarized light in different directions but also for left circularly polarized and right circularly polarized light. As such, this work provides insight into the design of optoelectronic devices based on the polarization characteristics of the incident light field on the optical switch and PIT.
RESUMEN
Despite the vast variety of colloidal superstructures available in soft matter photonics, it remains challenging to balance the trade-off between their optical microstructures and material processability. By synergizing colloidal photonics and dynamic chemistry, a type of photonic "plasticine" with characteristics of uniform structural colors, high processability, and self-healing is demonstrated. Specifically, a boronate ester bond-based macromonomer is first prepared through complexation between the diols of polyvinyl alcohol and the boronic acid group of 3-(acrylamido) phenylboronic acid in the presence of concentrated silica colloids. Upon photopolymerization, the dynamic photonic plasticine is formed in situ as the result of the crosslinking of the boronate ester bonded networks. The randomly packed colloids inside the plasticine compose the amorphous photonic crystals, giving rise to angle-independent structural colors that would not compromise during subsequent processing steps; the reversible nature of the boronate ester bonds endows the plasticine with self-adaptable and self-healing properties. Further, the plasticine is also compatible with common shaping methods, that is, cutting, molding, and carving, and thus can be facilely processed into 3D structural colored objects, holding great potentials in fields such as bio-encoding, optical filters, anti-counterfeiting, etc.