Treatment Processes for Microbial Resistance Mitigation: The Technological Contribution to Tackle the Problem of Antibiotic Resistance.

Advances generated in medicine, science, and technology have contributed to a better quality of life in recent years; however, antimicrobial resistance has also benefited from these advances, creating various environmental and health problems. Several determinants may explain the problem of antimicrobial resistance, such as wastewater treatment plants that represent a powerful agent for the promotion of antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARG), and are an important factor in mitigating the problem. This article focuses on reviewing current technologies for ARB and ARG removal treatments, which include disinfection, constructed wetlands, advanced oxidation processes (AOP), anaerobic, aerobic, or combined treatments, and nanomaterial-based treatments. Some of these technologies are highly intensive, such as AOP; however, other technologies require long treatment times or high doses of oxidizing agents. From this review, it can be concluded that treatment technologies must be significantly enhanced before the environmental and heath problems associated with antimicrobial resistance can be effectively solved. In either case, it is necessary to achieve total removal of bacteria and genes to avoid the possibility of regrowth given by the favorable environmental conditions at treatment plant facilities.

A simple spectroscopic method to determine dimethoate in water samples by complex formation.

A simple and rapid method for the determination of dimethoate in water was developed based on the monitoring of the complex formation between bis 5-phenyldipyrrinate of nickel (II) and the herbicide dimethoate. The method showed a short response time (10 s), high selectivity (very low interference from other sulfate and salts), high sensitivity (limit of detection (LOD) 0.45 µM, limit of quantitation (LOQ) of 1.39 µM), and a Kd of 2.4 µM. Stoichiometry experiments showed that complex formation occurred with a 1:1 relation. The method was applied to different environmental water samples such as lagoon, stream, urban, and groundwater samples. The results indicated that independently from the water source, the method exhibited high precision (0.25-2.47% variation coefficient) and accuracy (84.42-115.68% recovery). In addition, the method was also tested using an effluent from a wastewater treatment plant from Mexico; however, the results indicated that the presence of organic matter had a pronounced effect on the detection.

Emerging pollutant treatments in wastewater: Cases of antibiotics and hormones.

Because of the intensive use of pharmaceutical substances in human life, studies on the detection of these chemical compounds and their metabolites as pollutants in water bodies are continuously reported. Some pharmaceutical agents are associated with adverse effects to aquatic life, even at very low concentrations (ng L-1 to µg L-1). For instance, the presence of antibiotics and hormones has been associated with increasing proliferation of antibiotic resistant pathogens and feminization and masculinization of some aquatic organisms. Currently, new attempts are being made to minimize or fully remove these types of pollutants from aquatic systems to protect the environment and human health. In this regard, physicochemical and biological treatments are among the most promising technologies for the treatment of wastewater containing pharmaceutical pollutants. These treatments are green alternatives for the degradation of hazardous organic compounds into nontoxic by-products. Here, we review some of the physicochemical and biological treatment methods used for the removal of the most extensively used antibiotics and hormones. Enzymatic oxidation, photocatalysis and electrochemical oxidation are described in terms of the aforementioned pharmaceutically active compounds (PhACs). The use of membrane technologies to separate different groups of antibiotics and hormones prior to biologic or physicochemical treatment methods is also addressed.

Biocatalytic spectrophotometric method to detect paracetamol in water samples.

A biocatalytic methodology based on the quantification of the laccase inhibition during the oxidation of a standard substrate ABTS (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) for the indirect determination of paracetamol in drinking water has been developed. The method displayed a fast response time (20 s), and high selectivity to paracetamol in presence of interfering substances such as naproxen, estradiol, ketoprofen, sulfamethoxazole, and diclofenac. The limit of detection (LOD) and limit of quantification (LOQ) were noticed to be 0.55 µM and 8.3 µM, respectively. By comparing the catalytic constants value KM and kcat for ABTS oxidation in the absence and presence of various concentrations of paracetamol, a competitive-type inhibition was disclosed. On the other hand, the close value between Ki and KM indicates similar binding affinity of the enzyme to ABTS and paracetamol corroborated by docking studies. The methodology was successfully applied to real water samples, presenting an interesting potential for further development of a biosensor to paracetamol detection.

Volatile Organic Compound (VOC) Removal by Vapor Permeation at Low VOC Concentrations: Laboratory Scale Results and Modeling for Scale Up.

Petroleum transformation industries have applied membrane processes for solvent and hydrocarbon recovery as an economic alternative to reduce their emissions and reuse evaporated components. Separation of the volatile organic compounds (VOCs) (toluene-propylene-butadiene) from air was performed using a poly dimethyl siloxane (PDMS)/α-alumina membrane. The experimental set-up followed the constant pressure/variable flow set-up and was operated at ~21 °C. The membrane is held in a stainless steel module and has a separation area of 55 × 10-4 m². Feed stream was set to atmospheric pressure and permeate side to vacuum between 3 and 5 mbar. To determine the performance of the module, the removed fraction of VOC was analyzed by Gas Chromatography/Flame Ionization Detector (GC/FID). The separation of the binary, ternary and quaternary hydrocarbon mixtures from air was performed at different flow rates and more especially at low concentrations. The permeate flux, permeance, enrichment factor, separation efficiency and the recovery extent of the membrane were determined as a function of these operating conditions. The permeability coefficients and the permeate flux through the composite PDMS-alumina membrane follow the order given by the Hildebrand parameter: toluene > 1,3-butadiene > propylene. The simulated data for the binary VOC/air mixtures showed fairly good agreement with the experimental results in the case of 1,3-butadiene and propylene. The discrepancies observed for toluene permeation could be minimized by taking into account the effects of the porous support and an influence of the concentration polarization. Finally, the installation of a 0.02 m2 membrane module would reduce 95% of the VOC content introduced at real concentration conditions used in the oil industry.