RESUMEN
OBJECTIVES: To test the dose-reducing capabilities of a novel thyroid protection device and a recently introduced cranial collimator to be used in orthodontic lateral cephalography. METHODS: Cephalographic thyroid protector (CTP) was designed to shield the thyroid while leaving the cervical vertebrae depicted. Using a RANDO(®) head phantom (The Phantom Laboratory, Salem, NY) equipped with dosemeters and a Proline XC (Planmeca, Helsinki, Finland) cephalograph, lateral cephalograms were taken, and the effective dose (ED) was calculated for four protocols: (1) without shielding; (2) with CTP; (3) with CTP and anatomical cranial collimator (ACC); and (4) with a thyroid collar (TC). RESULTS: The ED for the respective protocols was (1) 8.51; (2) 5.39; (3) 3.50; and (4) 4.97 µSv. The organ dose for the thyroid was reduced from 30.17 to 4.50 µSv in Protocols 2 and 3 and to 3.33 µSv in Protocol 4. CONCLUSIONS: The use of just the CTP (Protocol 2) resulted in a 36.8% reduction of the ED of a lateral cephalogram. This was comparable to the classical TC (Protocol 4). A 58.8% reduction of the ED was obtained when combining CTP and ACC (Protocol 3). The dose to the radiosensitive thyroid gland was reduced by 85% in Protocols 2 and 3 and by 89% in Protocol 4.
Asunto(s)
Cefalometría/métodos , Dosis de Radiación , Protección Radiológica/instrumentación , Algoritmos , Encéfalo/efectos de la radiación , Cefalometría/instrumentación , Vértebras Cervicales/diagnóstico por imagen , Mejilla/efectos de la radiación , Diseño de Equipo , Esófago/efectos de la radiación , Humanos , Mandíbula/efectos de la radiación , Suelo de la Boca/efectos de la radiación , Músculos del Cuello/efectos de la radiación , Órbita/efectos de la radiación , Ortodoncia , Glándula Parótida/efectos de la radiación , Fantasmas de Imagen , Radiografía , Cráneo/efectos de la radiación , Glándula Submandibular/efectos de la radiación , Dosimetría Termoluminiscente/instrumentación , Glándula Tiroides/efectos de la radiaciónRESUMEN
OBJECTIVES: The objective of this study was to compare the performance of metal oxide semiconductor field-effect transistor (MOSFET) technology dosemeters with thermoluminescent dosemeters (TLDs) (TLD 100; Thermo Fisher Scientific, Waltham, MA) in the maxillofacial area. METHODS: Organ and effective dose measurements were performed using 40 TLD and 20 MOSFET dosemeters that were alternately placed in 20 different locations in 1 anthropomorphic RANDO(®) head phantom (the Phantom Laboratory, Salem, NY). The phantom was exposed to four different CBCT default maxillofacial protocols using small (4 × 5 cm) to full face (20 × 17 cm) fields of view (FOVs). RESULTS: The TLD effective doses ranged between 7.0 and 158.0 µSv and the MOSFET doses between 6.1 and 175.0 µSv. The MOSFET and TLD effective doses acquired using four different (FOV) protocols were as follows: face maxillofacial (FOV 20 × 17 cm) (MOSFET, 83.4 µSv; TLD, 87.6 µSv; -5%); teeth, upper jaw (FOV, 8.5 × 5.0 cm) (MOSFET, 6.1 µSv; TLD, 7.0 µSv; -14%); tooth, mandible and left molar (FOV, 4 × 5 cm) (MOSFET, 10.3 µSv; TLD, 12.3 µSv; -16%) and teeth, both jaws (FOV, 10 × 10 cm) (MOSFET, 175 µSv; TLD, 158 µSv; +11%). The largest variation in organ and effective dose was recorded in the small FOV protocols. CONCLUSIONS: Taking into account the uncertainties of both measurement methods and the results of the statistical analysis, the effective doses acquired using MOSFET dosemeters were found to be in good agreement with those obtained using TLD dosemeters. The MOSFET dosemeters constitute a feasible alternative for TLDs for the effective dose assessment of CBCT devices in the maxillofacial region.
RESUMEN
OBJECTIVES: The aim of this study was to evaluate the accuracy of two-dimensional (2D) and three-dimensional (3D) root canal length measurements in molar teeth using cone beam computed tomography (CBCT). MATERIALS AND METHODS: Root canal lengths of twenty molar teeth were measured with two different CBCT approaches. After adjusting the CBCT images, 2D measurements were performed within the sagittal plane between the apical foramen and the coronal reference (cusp). The 3D approach measured centrically in axial planes. A linear mixed model with random intercepts was fitted to compare differences between methods (2D and 3D). The correlation between CBCT measurements and the actual root canal length was evaluated using the Pearson correlation coefficient. RESULTS: Differences between 3D measurements and the actual root canal lengths were significantly smaller compared to the 2D approach (p < 0.001). Mean differences were 0.32 and 0.58 mm, respectively. A high correlation was found between the actual root canal length and 3D measurements (Pearson correlation coefficient = 0.97). Compared to the actual root canal length, 80 % of the 3D measurements were within the limits of ±0.5 mm. CONCLUSIONS: 3D measurements of root canals in molar teeth are more accurate than simple 2D measurements and show a high correlation to the actual lengths. CLINICAL RELEVANCE: In cases where a CBCT is already available, root canal lengths in molar teeth can be accurately predetermined using a standardized 3D approach.
Asunto(s)
Tomografía Computarizada de Haz Cónico/métodos , Cavidad Pulpar/anatomía & histología , Diente Molar/anatomía & histología , Diente Molar/diagnóstico por imagen , HumanosRESUMEN
OBJECTIVES: This study investigated the absorbed doses in a full anthropomorphic body phantom from two different panoramic radiography devices, performing protocols with and without applying a lead apron. METHODS: A RANDO(®) full body phantom (Alderson Research Laboratories Inc., Stamford, CT) was equipped with 110 thermoluminescent dosemeters at 55 different sites and set up in two different panoramic radiography devices [SCANORA(®) three-dimensional (3D) (SOREDEX, Tuusula, Finland) and ProMax(®) 3D (Planmeca, Helsinki, Finland)] and exposed. Two different protocols were performed in the two devices. The first protocol was performed without any lead shielding, whereas the phantom was equipped with a standard adult lead apron for the second protocol. RESULTS: A two-tailed paired samples t-test for the SCANORA 3D revealed that there is no difference between the protocol using lead apron shielding (m = 87.99, s = 102.98) and the protocol without shielding (m = 87.34, s = 107.49), t(54) = -0.313, p > 0.05. The same test for the ProMax 3D showed that there is also no difference between the protocol using shielding (m = 106.48, s = 117.38) and the protocol without shielding (m = 107.75, s = 114,36), t(54) = 0.938, p > 0.05. CONCLUSIONS: In conclusion, the results of this study showed no statistically significant differences between a panoramic radiography with or without the use of lead apron shielding.
Asunto(s)
Radiografía Panorámica , Dosimetría Termoluminiscente , Humanos , Fantasmas de Imagen , Dosis de Radiación , Protección Radiológica/instrumentación , Radiografía Dental Digital/instrumentación , Dosimetría Termoluminiscente/instrumentaciónRESUMEN
OBJECTIVES: Evaluation and reduction of dose are important issues. Since cone beam CT (CBCT) has been established now not just in dentistry, the number of acquired examinations continues to rise. Unfortunately, it is very difficult to compare the doses of available devices on the market owing to different exposition parameters, volumes and geometries. The aim of this study was to evaluate the spans of effective doses (EDs) of ten different CBCT devices. METHODS: 48 thermoluminescent dosemeters were placed in 24 sites in a RANDO(®) head phantom. Protocols with lowest exposition parameters and protocols with highest exposition parameters were performed for each of the ten devices. The ED was calculated from the measured energy doses according to the International Commission on Radiological Protection 2007 recommendations for each protocol and device, and the statistical values were evaluated afterwards. RESULTS: The calculation of the ED resulted in values between 17.2 µSv and 396 µSv for the ten devices. The mean values for protocols with lowest and highest exposition parameters were 31.6 µSv and 209 µSv, respectively. CONCLUSIONS: It was not the aim of this study to evaluate the image quality depending on different exposition parameters but to define the spans of EDs in which different CBCT devices work. There is a wide span of ED for different CBCT devices depending on the selected exposition parameters, required spatial resolution and many other factors.
Asunto(s)
Tomografía Computarizada de Haz Cónico/instrumentación , Dosis de Radiación , Calibración , Vértebras Cervicales/efectos de la radiación , Mejilla/efectos de la radiación , Tomografía Computarizada de Haz Cónico/métodos , Esófago/efectos de la radiación , Cabeza/efectos de la radiación , Humanos , Cristalino/efectos de la radiación , Mandíbula/efectos de la radiación , Mesencéfalo/efectos de la radiación , Órbita/efectos de la radiación , Glándula Parótida , Fantasmas de Imagen , Hipófisis/efectos de la radiación , Base del Cráneo/efectos de la radiación , Glándula Sublingual/efectos de la radiación , Glándula Submandibular/efectos de la radiación , Dosimetría Termoluminiscente/instrumentación , Glándula Tiroides/efectos de la radiaciónRESUMEN
OBJECTIVES: The aim of this study was to examine the relationship between the roof of the glenoid fossa (RGF) thickness and condyle morphology and the influence of the number of remaining teeth and age. METHODS: Cone beam CT data sets from 77 asymptomatic European patients were analysed retrospectively in this study. The thinnest area of RGF was identified among the sagittal and coronal slices on a computer screen; distance measurement software was used to measure the thickness. Moreover, we applied a free digital imaging and communications in medicine viewer for classification of condyle head type. It was also used to analyse any relation between RGF thickness and the number of remaining teeth. We performed a correlation analysis for RGF, age and missing teeth. Finally, we investigated combining sagittal condyle morphological characterization with coronal condyle morphology in relation to the number of joints and RGF thickness. RESULTS: The Kruskal-Wallis test revealed no significant differences in RGF thickness among any of the coronal condyle head morphology groups (p > 0.05). There were significant differences in the thinnest part of RGF in relation to the sagittal plane for condyle morphological characterization, because we observed increased RGF thickness in joints with osteoarthritis features (p < 0.05). There is a non-significant correlation between the thinnest part of the RGF and the number of remaining teeth (p > 0.05). CONCLUSIONS: We found that the RGF thickness is unaffected by the coronal condyle head morphology and the number of remaining teeth. Osteoarthritic changes (sagittal condyle morphology) have an effect on RGF.
Asunto(s)
Cóndilo Mandibular/patología , Osteoartritis/patología , Hueso Temporal/patología , Articulación Temporomandibular/patología , Pérdida de Diente/fisiopatología , Adolescente , Adulto , Factores de Edad , Anciano , Anciano de 80 o más Años , Niño , Tomografía Computarizada de Haz Cónico , Femenino , Humanos , Modelos Lineales , Masculino , Cóndilo Mandibular/diagnóstico por imagen , Persona de Mediana Edad , Osteoartritis/diagnóstico por imagen , Estudios Retrospectivos , Estadísticas no Paramétricas , Hueso Temporal/diagnóstico por imagen , Articulación Temporomandibular/diagnóstico por imagen , Trastornos de la Articulación Temporomandibular/diagnóstico por imagen , Trastornos de la Articulación Temporomandibular/patología , Adulto JovenRESUMEN
OBJECTIVES: This study investigated the absorbed doses in a full anthropomorphic body phantom from two different panoramic radiography devices, performing protocols with and without applying a lead apron. METHODS: A RANDO® full body phantom (Alderson Research Laboratories Inc., Stamford, CT) was equipped with 110 thermoluminescent dosemeters at 55 different sites and set up in two different panoramic radiography devices [SCANORA® three-dimensional (3D) (SOREDEX, Tuusula, Finland) and ProMax® 3D (Planmeca, Helsinki, Finland)] and exposed. Two different protocols were performed in the two devices. The first protocol was performed without any lead shielding, whereas the phantom was equipped with a standard adult lead apron for the second protocol. RESULTS: A two-tailed paired samples t-test for the SCANORA 3D revealed that there is no difference between the protocol using lead apron shielding (m = 87.99, s = 102.98) and the protocol without shielding (m = 87.34, s = 107.49), t(54) = −0.313, p > 0.05. The same test for the ProMax 3D showed that there is also no difference between the protocol using shielding (m = 106.48, s = 117.38) and the protocol without shielding (m = 107.75, s = 114,36), t(54) = 0.938, p > 0.05. CONCLUSIONS: In conclusion, the results of this study showed no statistically significant differences between a panoramic radiography with or without the use of lead apron shielding.