RESUMEN
Assessing the quality of fuel is essential to comprehend its impact on the environment and human health. In this study, the evaluation of fuel quality standards at the consumer level was conducted by analyzing the motor fuels in Khulna, Bangladesh. A total of 32 samples of petrol (regular gasoline), and octane (premium gasoline) were collected from the fuel stations in the Khulna City Corporation area and analyzed with an FTIR-Fuel Analyzer. Fuel properties, such as research octane number (RON), motor octane number (MON), ethanol content, olefins content, and oxygen content were analyzed. For petrol, the average RON, MON, olefins, and oxygen content were 95.34, 85.70, 8.23 %v/v, and 0.78 %m/m, respectively, and for octane, they were 96.96, 85.39, 1.25 %v/v, and 0.09 %m/m, respectively. Almost all of these parameters complied with both Bangladesh standard and Euro 5 fuel specifications, and those that did not comply were very close to their standard values. However, benzene concentration, which was not specified in Bangladesh Standard, was the most alarming metric for octane since none of the samples matched the Euro 5 fuel specifications of the maximum concentration of 1 %v/v benzene; on average it was 3.70 %v/v. Although petrol benzene content (average 1.50 %v/v) was not as bad as it was for octane, it was still nowhere near good enough, with only 25% of the samples within the recommended level among the studied sample. This information holds significance in establishing the fuel profile and facilitating the identification of distinct samples linked to adulteration. Therefore, the analysis of motor fuel qualities is essential for maintaining the environment, human health, and the economy of a country.