Effect of Water Content in Semidry Grinding on the Quality of Glutinous Rice Flour.

The grinding process is one of the key factors affecting the quality of glutinous rice flour (GRF). As an emerging grinding method, semidry grinding aims to solve the problems of the high yield of wastewater in traditional wet grinding and the high content of damaged starch in dry grinding, in which the water content has a great influence on the quality of GRF. However, semidry grinding has not yet been formally put into production due to limitations such as the long time required to adjust the water content of rice grains. Therefore, this work was carried out to shorten the soaking time of glutinous rice (GR) by hot air pretreatment, and to conduct a systematic and in-depth study of the effect of water content on the quality of GRF, including water distribution, water hydration properties, thermal properties, rheological properties, and microstructure. The results showed that the GRF with higher water content had lower water solubility and higher enthalpy of pasting, which were due to the low content of damaged starch and the high degree of crystallization. The particle size of the GRF became smaller as the interaction between water and starch was enhanced and the GR was softened. In addition, the viscosity and elasticity of the GRF were also improved with an increase in water content. This work provides theoretical guidance for the improvement of semidry grinding to a certain extent.

Advances in the preparation and application of cyclodextrin derivatives in food and the related fields.

Cyclodextrin (CD) derivatives have recently gained worldwide attention, which have versatile advantages and restrained the defects of parent CDs. The superior properties of CD derivatives in encapsulation, stabilization, and solubilization facilitate their application in food, biomedicine, daily chemicals, and textiles. In this review, the preparation, classification, and main benefits of CD derivatives are systematically introduced. By introducing targeted groups into the parent CD molecule, they exhibit significant improvement in their required characteristic. Besides, the important point closely related to application, the safety assessment, has also been highlighted. Most tested CD derivatives have been verified to be relatively safe in a limited dosage. Then, the applications of CD derivatives have been described in detail from the food to its related field. In food field, CD derivatives play an important role in the stability and bioavailability of bioactive compounds, control flavor release, and improve the antimicrobial and antioxidant properties of packaging materials. These advantages can also be expanded to the related field, offering innovative solutions that enhance product quality, human health, and environmental sustainability. This review highlights the broad applications and potential of CD derivatives, underscoring their role in driving advancements across multiple industries.

Interaction of zein/HP-ß-CD nanoparticles with digestive enzymes: Enhancing curcumin bioavailability.

The low bioavailability of polyphenolic compounds due to poor solubility and stability is a major challenge. Encapsulation of polyphenols in zein-based composite nanoparticles can improve the water dispersion, stability, targeted delivery, and controlled release of polyphenols in the gastrointestinal tract. In this study, we investigated the fluorescence properties, bioactivity, and microstructural characteristics of polyphenols during digestion, revealing that zein nanoparticles protect polyphenols from gastric degradation and promote their sustained release in the small intestine. The effects of different ionic species and salt ion concentrations on the digestive properties of polyphenol complex delivery systems have also been explored. In addition, the formation of "protein corona" structures during digestion may affect bioavailability. These findings highlight the potential of nanoparticle formulations to improve polyphenol stability and absorption. The results of this study may provide new insights and references for the study of polyphenol bioavailability enhancement.

Effects of wheat starch content on its flour and frozen dough bread.

The refined wheat flour was mixed with different types of wheat starch in different addition levels, their microstructure, chemical bonds in the dough and baking characteristics of 0-8 weeks frozen dough bread were studied. With the increase of A-Type starch granules and whole wheat starch, the pores of gluten network first decreased and then increased. Conversely, an increase in B-Type starch granules consistently reduced gluten network porosity. With the increase of whole wheat starch, the content of free sulfhydryl group and hydrophobic interaction decreased gradually. Minimal additions of B-Type granules were found to enhance the specific volume of fresh bread, whereas increased quantities improved the specific volume of frozen dough bread. The addition of a small quantity of A- or B-Type granules enhances the freezing stability of bread. This study provides effective information for elucidating the effects of wheat starch on the frozen dough and bread properties in protein-starch matrix.

Fabrication and characterization of polydopamine-mediated zein-based nanoparticle for delivery of bioactive molecules.

In this study, a combination of whey protein (hydrophilic coating) and polydopamine (crosslinking agent) was used to improve the stability and functionality of quercetin-loaded zein nanoparticles. There are two key benefits of the core-shell nanoparticles formed. First, the ability of the polydopamine to bind to both zein and whey protein facilitates the formation of a stable core-shell structure, thereby protecting quercetin from any pro-oxidants in the aqueous surroundings. Second, neutral and hydrophilic whey proteins were used for the surface coating of the nanoparticles to further enhance the sustained and slow release of quercetin, facilitating its sustained release into the body at a slow and steady rate. The results of this study will promote the innovative development of precise nutritional delivery systems for zein and provide a theoretical basis for the design and development of dietary supplements based on hydrophobic food nutrient molecules.

Structural Features, Physicochemical Properties, and In Vitro Digestibility of the Starch-Lipid Complexes Formed between High Amylose Starch and Stearic Acid or Potassium Stearate.

Starch-lipid complexes were prepared from high amylose starch (HAS) with stearic acid (SA) or potassium stearate (PS) at different molar concentrations. The complexes (HAS-PS) formed between HAS and PS showed polyelectrolyte characteristics with ζ-potential ranging from -22.2 to -32.8 mV, and the electrostatic repulsion between anionic charges restricted the starch chain reassociation and facilitated the formation of V-type crystalline structures upon cooling. The hydrophobic effects enabled recrystallization of the SA, and the HAS-SA complexes exhibited weaker V-type crystalline structures than the HAS-PS complexes; both HAS-SA/PS complexes were of a similar "mass fractal" type, with a dimension varied from 2.15 to 2.96. The HAS-SA complexes had a considerable content of resistant starch (RS, 16.1~29.2%), whereas negligible RS was found in the HAS-PS complexes. The findings from the present study imply that the molecular order of starch chains and the macro-structures of starch particles are more important to regulate the digestibility of starch-lipid complexes than the crystalline structures.

Long-Term Retrogradation Properties and In Vitro Digestibility of Waxy Rice Starch Modified with Pectin.

In recent years, the blending of hydrocolloids and natural starch to improve the properties of natural starch has become a research hotspot. In this study, the effects of pectin (PEC) on the retrogradation properties and in vitro digestibility of waxy rice starch (WRS) were investigated. The results showed that PEC could significantly (p < 0.05) reduce the retrogradation enthalpy and reduce the hardness of WRS gel. X-ray diffraction results indicated that PEC could reduce the relative crystallinity of the composite system, and the higher the PEC content, the lower the relative crystallinity. When the PEC content was 10%, the relative crystallinity of the composite system was only 10.6% after 21 d of cold storage. Fourier transform infrared spectroscopy results proved that the interaction between PEC and WRS was mainly a hydrogen bond interaction. Furthermore, after 21 d of cold storage, the T23 free water signal appeared in the natural WRS paste, while only a small free water signal appeared in the compound system with 2% PEC addition. Moreover, addition of PEC could reduce the starch digestion rate and digestibility. When the content of PEC increased from 0% to 10%, the digestibility decreased from 82.31% to 71.84%. This study provides a theoretical basis for the further application of hydrocolloids in starch-based foods.

Health benefits, mechanisms of interaction with food components, and delivery of tea polyphenols: a review.

Tea polyphenols (TPs) are the most important active component of tea and have become a research focus among natural products, thanks to their antioxidant, lipid-lowering, liver-protecting, anti-tumor, and other biological activities. Polyphenols can interact with other food components, such as protein, polysaccharides, lipids, and metal ions to further improve the texture, flavor, and sensory quality of food, and are widely used in food fields, such as food preservatives, antibacterial agents and food packaging. However, the instability of TPs under conditions such as light or heat and their low bioavailability in the gastrointestinal environment also hinder their application in food. In this review, we summarized the health benefits of TPs. In order to better use TPs in food, we analyzed the form and mechanism of interaction between TPs and main food components, such as polysaccharides and proteins. Moreover, we reviewed research into optimizing the applications of TPs in food by bio-based delivery systems, such as liposomes, nanoemulsions, and nanoparticles, so as to improve the stability and bioactivity of TPs in food application. As an effective active ingredient, TPs have great potential to be applied in functional food to produce benefits for human health.

Recent advances in natural gums as additives to help the construction and application of edible biopolymer gels: the example of hydrogels and oleogels.

Novel, innovative approaches like edible gels (hydrogels and oleogels) are important food materials with great scientific interest due to their positive impacts on structural and functional foods and other unique properties. Biopolymers (protein, starch and other polysaccharides) can be excellent and cost-effective materials for the formed edible gels. Recently, natural gums, although also as biopolymers, are preferred as additives to further improve the textural and functional properties of edible gels, which have received extensive attention. However, these studies have not been outlined in previous reviews. In this review, we highlighted the advantages of gums as additives to construct edible gels. Moreover, the various roles (including electrostatic or covalent interactions) for natural gums in regulation of food gel properties (solvent-holding and rheological properties) are highlighted. Finally, the use of natural gums as additives to improve the stability and targeted delivery of phytochemicals in food gels and their application in food systems are summarized. The information covered in this article may be useful for the design of functional foods that can better meet personalized needs of people.

Structural, rheological, and gelling characteristics of starch-based materials in context to 3D food printing applications in precision nutrition.

Starch-based materials have viscoelasticity, viscous film-forming, dough pseudoplasticity, and rheological properties, which possess the structural characteristics (crystal structure, double helix structure, and layered structure) suitable for three-dimensional (3D) food printing inks. 3D food printing technology has significant advantages in customizing personalized and precise nutrition, expanding the range of ingredients, designing unique food appearances, and simplifying the food supply chain. Precision nutrition aims to consider individual nutritional needs and individual differences, which include special food product design and personalized precise nutrition, thus expanding future food resources, then simplifying the food supply chain, and attracting extensive attention in food industry. Different types of starch-based materials with different structures and rheological properties meet different 3D food printing technology requirements. Starch-based materials suitable for 3D food printing technology can accurately deliver and release active substances or drugs. These active substances or drugs have certain regulatory effects on the gut microbiome and diabetes, so as to maintain personalized and accurate nutrition.

Co-encapsulation of curcumin and quercetin with zein/HP-ß-CD conjugates to enhance environmental resistance and antioxidant activity.

In this study, composite nanoparticles consisting of zein and hydroxypropyl beta-cyclodextrin were prepared using a combined antisolvent co-precipitation/electrostatic interaction method. The effects of calcium ion concentration on the stability of the composite nanoparticles containing both curcumin and quercetin were investigated. Moreover, the stability and bioactivity of the quercetin and curcumin were characterized before and after encapsulation. Fluorescence spectroscopy, Fourier Transform infrared spectroscopy, and X-ray diffraction analyses indicated that electrostatic interactions, hydrogen bonding, and hydrophobic interactions were the main driving forces for the formation of the composite nanoparticles. The addition of calcium ions promoted crosslinking of the proteins and affected the stability of the protein-cyclodextrin composite particles through electrostatic screening and binding effects. The addition of calcium ions to the composite particles improved the encapsulation efficiency, antioxidant activity, and stability of the curcumin and quercetin. However, there was an optimum calcium ion concentration (2.0 mM) that provided the best encapsulation and protective effects on the nutraceuticals. The calcium crosslinked composite particles were shown to maintain good stability under different pH and simulated gastrointestinal digestion conditions. These results suggest that zein-cyclodextrin composite nanoparticles may be useful plant-based colloidal delivery systems for hydrophobic bio-active agents.

Cyclodextrin carboxylate improves the stability and activity of nisin in a wider range of application conditions.

Nisin is a natural bacteriocin that exhibits good antibacterial activity against Gram-positive bacteria. It has good solubility, stability, and activity under acidic conditions, but it becomes less soluble, stable, and active when the solution pH exceeds 6.0, which severely restricted the industrial application range of nisin as antibacterial agent. In this study, we investigated the potential of complexing nisin with a cyclodextrin carboxylate, succinic acid-ß-cyclodextrin (SACD), to overcome the disadvantages. Strong hydrogen bonding was shown between the nisin and SACD, promoting the formation of nisin-SACD complexes. These complexes exhibited good solubility under neutral and alkaline conditions, and good stability after being held at high pH values during processing with high-steam sterilization. Moreover, the nisin-SACD complexes displayed significantly improved antibacterial activity against model Gram-positive bacteria (S. aureus). This study shows that complexation can improve the efficacy of nisin under neutral and alkaline situations, which may greatly broaden its application range in food, medical, and other industries.

Preparation of robust, water-resistant, antibacterial, and antioxidant chitosan-based films by incorporation of cinnamaldehyde-tannin acid-zinc acetate nanoparticles.

Chitosan (CS) films have poor mechanical property, low water-resistance and limited antimicrobial activity, which hinder their application in food preservation industry. Cinnamaldehyde-tannic acid-zinc acetate nanoparticles (CTZA NPs) assembled from edible medicinal plant extracts were successfully incorporated into CS films to solve these issues. The tensile strength and water contact angle of the composite films increased about 5.25-fold and 17.55°. The addition of CTZA NPs reduced the water sensitivity of CS films, which could undergo appreciable stretching in water without breaking. Furthermore, CTZA NPs significantly enhanced the UV adsorption, antibacterial, and antioxidant properties of the films, while reduced their water vapor permeability. Moreover, it was possible to print inks onto the films because the presence of the hydrophobic CTZA NPs facilitated the deposition of carbon powder onto their surfaces. The films with great antibacterial and antioxidant activities can be applied for food packaging application.

Physicochemical stability, antioxidant activity, and antimicrobial activity of quercetin-loaded zein nanoparticles coated with dextrin-modified anionic polysaccharides.

Core-shell biopolymer nanoparticles are assembled from a hydrophobic protein (zein) core and a hydrophilic polysaccharide (carboxymethyl dextrin) shell. The nanoparticles were shown to have good stability and the ability to protect quercetin from chemical degradation under long-term storage, pasteurization, and UV irradiation. Spectroscopy analysis shows that electrostatic, hydrogen bonding, and hydrophobic interactions are the main driving forces for the formation of composite nanoparticles. Quercetin coated with nanoparticles significantly enhanced its antioxidant and antibacterial activities and showed good stability and slow release in vitro during simulated gastrointestinal digestion. Furthermore, the encapsulation efficiency of carboxymethyl dextrin-coated zein nanoparticles (81.2%) for quercetin was significantly improved compared with that of zein nanoparticles alone (58.4%). These results indicate that carboxymethyl dextrin-coated zein nanoparticles can significantly improve the bioavailability of hydrophobic nutrient molecules such as quercetin and provide a valuable reference for their application in the field of biological delivery of energy drinks and food.

Research advances of advanced glycation end products in milk and dairy products: Formation, determination, control strategy and immunometabolism via gut microbiota.

Advanced glycosylation end products (AGEs) are a series of complex compounds which generate in the advanced phase of Maillard reaction, which can pose a non-negligible risk to human health. This article systematically encompasses AGEs in milk and dairy products under different processing conditions, influencing factors, inhibition mechanism and levels among the different categories of dairy products. In particular, it describes the effects of various sterilization techniques on the Maillard reaction. Different processing techniques have a significant effect on AGEs content. In addition, it clearly articulates the determination methods of AGEs and even discusses its immunometabolism via gut microbiota. It is observed that the metabolism of AGEs can affect the composition of the gut microbiota, which further has an impact on intestinal function and the gut-brain axis. This research also provides a suggestion for AGEs mitigation strategies, which are beneficial to optimize the dairy production, especially innovative processing technology application.

Interactions between plant-derived antioxidants and cyclodextrins and their application for improving separation, detection, and food quality issues.

Plant-derived antioxidants (PD-AOs) are important for food preservation, as well as for human health and nutrition. However, the poor chemical stability and water solubility of many PD-AOs currently limit their application as functional ingredients in foods and pharmaceuticals. Moreover, it is often difficult to isolate and detect specific antioxidants in multi-component systems, which again limits their potential in the food and medical industries. In this review, we highlight recent advances in the use of cyclodextrins (CDs) to overcome these limitations by forming simple, modified and competitive host-guest interactions with PD-AO. The host-guest properties of CDs can be used to enhance the separation efficiency of PD-AOs, as well as to improve their dispersion and stability in food systems. Moreover, the competitive complexation properties of CDs with target molecules can be used to selectively isolate PD-AOs from multi-component systems and develop detection technologies for PD-AOs. Overall, CD-antioxidant interactions have great potential for addressing isolation, detection, and food quality issues.

Research advance of non-thermal processing technologies on ovalbumin properties: The gelation, foaming, emulsification, allergenicity, immunoregulation and its delivery system application.

Ovalbumin (OVA) is the most abundant protein in egg white, with excellent functional properties (e.g., gelling, foaming, emulsifying properties). Nevertheless, OVA has strong allergenicity, which is usually mediated by specific IgE thus results in gut microbiota dysbiosis and causes atopic dermatitis, asthma, and other inflammation actions. Processing technologies and the interactions with other active ingredients can influence the functional properties and allergic epitopes of OVA. This review focuses on the non-thermal processing technologies effects on the functional properties and allergenicity of OVA. Moreover, the research advance about immunomodulatory mechanisms of OVA-mediated food allergy and the role of gut microbiota in OVA allergy was summarized. Finally, the interactions between OVA and active ingredients (such as polyphenols and polysaccharides) and OVA-based delivery systems construction are summarized. Compared with traditional thermal processing technologies, novel non-thermal processing techniques have less damage to OVA nutritional value, which also improve OVA properties. OVA can interact with various active ingredients by covalent and non-covalent interactions during processing, which can alter the structure or allergic epitopes to affect OVA/active components properties. The interactions can promote OVA-based delivery systems construction, such as emulsions, hydrogels, microencapsulation, nanoparticles to encapsulate bioactive components and monitor freshness for improving foods quality and safety.

Preparation, properties and interaction of curcumin loaded zein/HP-ß-CD nanoparticles based on electrostatic interactions by antisolvent co-precipitation.

In this study, zein/hydroxypropyl-beta-cyclodextrin nanoparticles (ZHNPs) were synthesized using a combination of antisolvent co-precipitation and electrostatic attraction. The structural and physicochemical properties of the NPs were characterized using a variety of analytical methods. NPs with small mean diameters (143.6 nm) and strong cationic surface potentials (+62.1 mV) could be obtained at a mass ratio of zein-to-HP-ß-CD of 1:1. These NPs were then used to encapsulate a model hydrophobic nutraceutical, curcumin. The results of zeta-potential, Fourier-transform infrared spectroscopy, X-ray diffractometry, and fluorescence spectroscopy measurements suggested that electrostatic, hydrogen bonding, and hydrophobic interactions were the main driving forces for NPs formation and curcumin encapsulation. The NPs had a relatively high encapsulation efficiency (89.41 %) for curcumin and improved its antioxidant activity (3.6-fold that of free curcumin) and photostability. Consequently, they could be used as effective food-grade delivery systems for low water-soluble bioactive substances.

Origin of static magnetic field induced quality improvement in sea bass (Lateolabrax japonicus) during cold storage: Microbial growth inhibition and protein structure stabilization.

To explore the potential application of static magnetic field (SMF) treatment in marine fish preservation, the sea bass (Lateolabrax japonicus) was exposed to SMF (5 mT) and its quality changes during cold storage were evaluated by total viable counts, water holding capacity, pH, color, and textural properties. Characteristics of the protein in the presence of SMF were investigated by measuring total sulfhydryl (SH) content, Ca2+-ATPase activity, secondary structure, and muscle microstructure. SMF treatment exhibited positive effects on fish quality, showing favorable performance on the most quality indicators, especially a significant reduction in the Microbial Counts. Furthermore, higher total SH content and Ca2+-ATPase activity were observed in SMF-treated samples, demonstrating that the oxidation and denaturation of myofibrillar protein (MP) were delayed due to SMF treatment. The transformation of α-helix to random coil was prevented in SMF-treated samples, indicating that the secondary structure of MP was stabilized by SMF treatment. The above changes in protein structures were accompanied by changes in muscle microstructure. More intact and compact structures were observed in SMF-treated samples, characterized by well-defined boundaries between myofibers. Therefore, our findings suggest that under the conditions of this article, SMF treatment could maintain the quality of fish mainly by inhibiting the growth of microorganisms and enhancing the stability of protein structures, and could be a promising auxiliary technology for preservation of aquatic products.

Construction of functional soybean peptide-cyclodextrin carboxylate nanoparticles and their interaction with porcine pancreatic α-amylase.

In this study, soybean peptide-succinic acid-modified cyclodextrin (SPT-SACD) nanoparticles (NPs) were successfully fabricated by combining SPT and SACD using an antisolvent precipitation approach. The effects of the average molecular weight of SPT and the SPT/SACD mass ratio on the structure and properties of the SACD-SPT NPs were investigated. Under optimal conditions, the SPT/SACD mass ratio was 2:1, and the SPT average molecular weight was 300 Da. SPT-SACD NPs were prepared under these conditions were spherical and had good uniformity. The particle sizes by DLS of SPT1 (300 Da) /SACD and SPT2 (500 Da) /SACD were in the range of 250-400 nm. The interaction between α-amylase and SPT-SACD NPs was investigated using ultraviolet visible (UV-Vis) absorption, fluorescence, and circular dichroism (CD) spectroscopy. The results of the fluorescence spectra and CD spectroscopy suggested that the presence of SPT-SACD NPs changed the microenvironment of the aromatic amino acid residues, which leads to the change of enzyme protein structure. The SPT-SACD NPs statically quenched the intrinsic fluorescence of the α-amylase by forming a complex with the enzyme. Moreover, the SPT-SACD NPs significantly improved the inhibitory effect of EGCG on α-amylase. The semi-inhibitory concentration (IC50) decreased from 0.324 to 0.248 mg/mL. This study provides an improved understanding of the interaction mechanism between polypeptide-cyclodextrin complexes and digestive enzymes, which may facilitate the design of functional foods.