Efficacy of acellular xenogeneic dermal matrix graft in the treatment of multiple gingival recessions: systematic review and meta-analysis.

OBJECTIVE: This study aimed to compare the efficacy of acellular xenogeneic dermal matrix graft (AXDM) compared to connective tissue graft (CTG) in treating multiple gingival recessions. MATERIALS AND METHODS: A systematic search of electronic databases was conducted to identify randomized clinical trials (RCTs) that compared AXDM and CTG. The selected studies were subjected to bias risk assessment, data extraction, and meta-analyses. Parameters such as gingival recession height, width, mean percentage of root coverage, and complete root coverage were analyzed. RESULTS: Seven RCTs involving 146 patients were included. The meta-analyses indicated that CTG was statistically superior to AXDM in reducing gingival recession height at the final follow-up (mean difference: -0.104 mm, 95% confidence interval [CI]: -0.180-0.028, p = 0.008) and width at the final follow-up (mean difference: -0.285 mm, 95% CI: -0.541-0.030, p = 0.029). CTG also demonstrated a significantly higher mean percentage of root coverage at the 6-month follow-up (difference in means: -2.761 mm, 95% CI: -4.932-0.590, p = 0.013) and a higher percentage of complete root coverage at the 6-month follow-up (odds Ratio [OR]: 0.598, 95% CI: 0.4-0.892, p = 0.012) compared to AXDM. However, there was no significant difference in the number of teeth with complete root coverage between CTG and AXDM (OR: 1.610, 95% CI: 0.983-2.636, p = 0.058) and aesthetic outcomes (mean difference: 0.148, 95% CI: -0.277-0.573, p = 0.494). CONCLUSIONS: CTG is more effective than AXDM in treating multiple gingival recessions. This is evidenced by significant reductions in gingival recession height and width, a higher mean percentage of root coverage, and a greater percentage of complete root coverage at the 6-month follow-up. CLINICAL RELEVANCE: In some clinical situations an alternative to CTG is required for the treatment of multiple gingival recessions. AXDM, despite presenting clinical outcomes that are not as satisfactory as CTG, can be used for this purpose.

Factors associated with the non-adaptation to new mandibular complete dentures: a scoping review.

PURPOSE: To identify and map the scientific evidence regarding the factors that may influence the adaptation of complete edentulous to the mandibular complete denture. MATERIALS AND METHODS: An electronic search strategy in the PubMed/MEDLINE, Web of Science, Scopus, Cochrane Library, and Virtual Health Library databases from 1945 to 2021, was conducted, according to the criteria established by PRISMA-ScR. Studies that addressed factors that influenced adaptation and acceptance to mandibular complete denture were included, such as socio-demographic and psychological aspects and patient-centered condition, and denturer-elated factors. RESULTS: The search yielded 9264 studies, of which 87 articles were considered eligible for full-text screening. Of this total, 23 were included for data extraction. Sociodemographic factors do not interfere with adaptation to a mandibular complete denture. Reports of complaints regarding pain and discomfort negatively impact the acceptance of complete dentures. Patients with a neuroticism personality have more difficulty accepting the complete dentures, being more predisposed to abandon them. CONCLUSION: The psychological condition interferes with the predictability of treatment. Older and female patients, using first mandibular dentures, with resorbed ridges, and poor technical quality had more difficulty adapting to the complete dentures. However, these data must be interpreted with caution due to the variability of methodologies of the studies included in this review. Int J Prosthodont 2023. doi: 10.11607/ijp.7774.

Bone Substitutes Graft for Regeneration of the Anterior Maxillary Alveolar Process: A Systematic Review.

The objective of this systematic review was to identify the available scientific evidence on bone substitutes (BSs) compared with autogenous bone grafts (ABGs) for regeneration of horizontal bone resorption in the anterior maxillary alveolar process, aiming at rehabilitation with endosseous implants. This review was performed according to the PRISMA guidelines (2020) and registered in the database PROSPERO (CRD: 42017070574). The databases searched were PUBMED/MEDLINE, EMBASE, SCOPUS, SCIENCE DIRECT, WEB OF SCIENCE, and CENTRAL COCHRANE, in the English language. The Australian National Health and Medical Research Council (NHMRC) and Cochrane Risk of Bias Tool were used to assess the study's quality and risk of bias. A total of 524 papers were found. After the selection process, 6 studies were selected for review. A total of 182 patients were followed for a period of 6 to 48 months. The mean age of patients was 46.46 years, and 152 implants were installed in the anterior region. Two studies achieved a reduced graft and implant failure rate, whereas the remaining 4 studies had no losses. It may be concluded that the use of ABGs and some BSs is a viable alternative for the rehabilitation with implants in individuals with anterior horizontal bone loss. However, additional randomized controlled trials are warranted due to the limited number of papers.

Quality Assessment of Systematic Reviews on Platform-Switching vs Platform-Matched Implants: An Overview.

The objective of this study was to perform a quality analysis of systematic reviews with meta-analyses that focused on the comparison of platform-switching (implant-abutment mismatching) and platform-matched (PM) implants. The assessment of multiple systematic reviews (AMSTAR) and Glenny (Checklist) Scales were used to qualify the studies. PubMed, Scientific Electronic Library Online (SciELO), Web of Science (formerly ISI Web of Knowledge), and Cochrane databases were searched, by topic, for systematic reviews on dental implants with switching platforms. A total of 8 systematic reviews, including 7 studies with meta-analyses, were selected. The AMSTAR scale indicated a high (n = 6) to moderate (n = 2) score for the included studies. The quantitative analysis indicated that platform-switching implants preserved more bone tissue when compared with platform-matched implants (6 meta-analyses; P < .001, smaller mean difference: -0.29 mm, 95% CI: -0.38, -0.19 and greater mean difference: -0.49 mm, 95% CI: -0.73, -0.26). Quantitative analysis based on 7 systematic reviews with meta-analysis indicated positive peri-implant bone preservation for implants restored with an implant-abutment mismatching (PSW). Further, there is evidence to improve the design of current systematic reviews. Future systematic reviews in this thematic area should consider searches in gray literature and different databases and include only randomized controlled clinical studies.

Evaluation of condylar resorption rates after orthognathic surgery in class II and III dentofacial deformities: A systematic review.

The purpose of this study was to perform a systematic review of morphological alterations in the condyles after orthographic surgery involving a sagittal split ramus osteotomy (SSRO), with or without surgery on the maxilla. Searches were performed on three databases and registered in the PROSPERO. The selected studies fulfilled the criteria established by the following PICO model: (1) population: individuals with skeletal dentofacial deformities (class II or III facial patterns), without asymmetry; (2) intervention: orthognathic surgery for mandibular setback using an SSRO, with or without a Le Fort I osteotomy, and fixed with bicortical screws or plates and screws; (3) comparison: orthognathic surgery for mandibular advancement using an SSRO, with or without a Le Fort I osteotomy, and fixed with plates and screws or bicortical screws; and (4) outcome: condylar resorption rate and relapse. Initially, 1,371 articles were identified and 636 articles were screened after elimination of duplicates, and 6 articles were selected for qualitative analysis based on the inclusion and exclusion criteria. Five studies had data regarding the rate of condylar resorption, varying from 0.0% to 4.2%. In conclusion, condylar resorption and relapses were present in a small percentage of patients studied.

Retention System and Splinting on Morse Taper Implants in the Posterior Maxilla by 3D Finite Element Analysis.

The purpose of this study was to evaluate different retention systems (cement- or screw-retained) and crown designs (non-splinted or splinted) of fixed implant-supported restorations, in terms of stress distributions in implants/components and bone tissue, by 3-dimensional (3D) finite element analysis. Four 3D models were simulated with the InVesalius, Rhinoceros 3D, and SolidWorks programs. Models were made of type III bone from the posterior maxillary area. Models included three 4.0-mm-diameter Morse taper (MT) implants with different lengths, which supported metal-ceramic crowns. Models were processed by the Femap and NeiNastran programs, using an axial force of 400 N and oblique force of 200 N. Results were visualized as the von Mises stress and maximum principal stress (σmax). Under axial loading, there was no difference in the distribution of stress in implants/components between retention systems and splinted crowns; however, in oblique loading, cemented prostheses showed better stress distribution than screwed prostheses, whereas splinted crowns tended to reduce stress in the implant of the first molar. In the bone tissue cemented prostheses showed better stress distribution in bone tissue than screwed prostheses under axial and oblique loading. The splinted design only had an effect in the screwed prosthesis, with no influence in the cemented prosthesis. Cemented prostheses on MT implants showed more favorable stress distributions in implants/components and bone tissue. Splinting was favorable for stress distribution only for screwed prostheses under oblique loading.

Three-Dimensional Finite Element Analysis of Varying Diameter and Connection Type in Implants with High Crown-Implant Ratio.

The aim of this study was to evaluate the effect of varying the diameter, connection type and loading on stress distribution in the cortical bone for implants with a high crown-implant ratio. Six 3D models were simulated with the InVesalius, Rhinoceros 3D 4.0 and SolidWorks 2011 software programs. Models were composed of bone from the posterior mandibular region; they included an implant of 8.5 mm length, diameter Ø 3.75 mm or Ø 5.00 mm and connection types such as external hexagon (EH), internal hexagon (IH) and Morse taper (MT). Models were processed using the Femap 11.2 and NeiNastran 11.0 programs and by using an axial force of 200 N and oblique force of 100 N. Results were recorded in terms of the maximum principal stress. Oblique loading showed high stress in the cortical bone compared to that shown by axial loading. The results showed that implants with a wide diameter showed more favorable stress distribution in the cortical bone region than regular diameter, regardless of the connection type. Morse taper implants showed better stress distribution compared to other connection types, especially in the oblique loading. Thus, oblique loading showed higher stress concentration in cortical bone tissue when compared with axial loading. Wide diameter implant was favorable for improved stress distribution in the cortical bone region, while Morse taper implants showed lower stress concentration than other connections.

Biomechanical Three-Dimensional Finite Element Analysis of Single Implant-Supported Prostheses in the Anterior Maxilla, with Different Surgical Techniques and Implant Types.

PURPOSE: The aim of this study was to use three-dimensional finite element analysis to analyze the stress distribution transferred by single implant-supported prostheses placed in the anterior maxilla using different connections (external hexagon, internal hexagon, or Morse taper), inclinations of the load (0, 30, or 60 degrees), and surgical techniques for placement (monocortical/conventional, bicortical, or bicortical with nasal floor elevation). MATERIALS AND METHODS: Nine models representing a bone block of this region were simulated by computer-aided design software (InVesalius, Rhinoceros, SolidWorks). Each model received one implant, which supported a cemented metalloceramic crown. Using FEMAP software, finite elements were discretized while simulating a 178-N load at 0, 30, and 60 degrees relative to the long axis of the implant. The problem was solved in NEi Nastran software, and postprocessing was performed in FEMAP. Von Mises stress and maximum principal stress maps were made. RESULTS: The von Mises stress analysis revealed that stress increased with increasing inclination of the load, from 0 to 30 to 60 degrees. Morse taper implants showed less stress concentration around the cervical and apical areas of the implant. The bicortical technique, associated or not with nasal floor elevation, contributed to decreasing the stress concentration in the apical area of the implant. Maximum principal stress analysis showed that the increase in inclination was proportional to the increase in stress on the bone tissue in the cervical area. Lower stress concentrations in the cortical bone were obtained with Morse taper implants and the bicortical technique compared with other connections and surgical techniques, respectively. CONCLUSION: Increasing the inclination of the applied force relative to the long axis of the implant tended to overload the peri-implant bone tissue and the internal structure of the implants. The Morse taper connection and bicortical techniques seemed to be more favorable than other connections or techniques, respectively, for restoring the anterior maxilla.

Effect of different types of prosthetic platforms on stress-distribution in dental implant-supported prostheses.

A biomechanical analysis of different types of implant connections is relevant to clinical practice because it may impact the longevity of the rehabilitation treatment. Therefore, the objective of this study is to evaluate the Morse taper connections and the stress distribution of structures associated with the platform switching (PSW) concept. It will do this by obtaining data on the biomechanical behavior of the main structure in relation to the dental implant using the 3-dimensional finite element methodology. Four models were simulated (with each containing a single prosthesis over the implant) in the molar region, with the following specifications: M1 and M2 is an external hexagonal implant on a regular platform; M3 is an external hexagonal implant using PSW concept; and M4 is a Morse taper implant. The modeling process involved the use of images from InVesalius CT (computed tomography) processing software, which were refined using Rhinoceros 4.0 and SolidWorks 2011 CAD software. The models were then exported into the finite element program (FEMAP 11.0) to configure the meshes. The models were processed using NeiNastram software. The main results are that M1 (regular diameter 4mm) had the highest stress concentration area and highest microstrain concentration for bone tissue, dental implants, and the retaining screw (P<0.05). Using the PSW concept increases the area of the stress concentrations in the retaining screw (P<0.05) more than in the regular platform implant. It was concluded that the increase in diameter is beneficial for stress distribution and that the PSW concept had higher stress concentrations in the retaining screw and the crown compared to the regular platform implant.

Irradiated patients and survival rate of dental implants: A systematic review and meta-analysis.

STATEMENT OF PROBLEM: Radiotherapy has been considered a contraindication for rehabilitation with dental implants because it can change the survival rate of implants. Nevertheless, the installation of implants in irradiated patients has been used with varying success. PURPOSE: The purpose of this systematic review was to compare the success rate of implants placed in irradiated human bone tissue with that of implants placed in nonirradiated areas. MATERIAL AND METHODS: Searches were performed in the EMBASE, Cochrane, and PubMed/Medline databases up to December 2013 to identify clinical trials addressing the subject. This systematic review was conducted according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. The relative risks of implant failure and survival curves were calculated considering a confidence interval of 95%. Heterogeneity was analyzed by using a funnel chart. RESULTS: A total of 40 studies involving 2220 participants and 9231 dental implants were selected. The survival curve of the studies indicated a survival rate of 84.3% for implants installed in irradiated bone tissue. The meta-analysis indicated statistically significant differences (P<.001) between item success rates of implants placed in irradiated areas and those of implants placed in nonirradiated areas. CONCLUSIONS: Dental implants installed in the irradiated area of an oral cavity have a high survival rate, but strict monitoring is needed to prevent complications, thereby reducing possible failures.

Medication-related osteonecrosis of the jaw. Introduction of a new modified experimental model.

PURPOSE: To evaluate a modified experimental model for medication-related osteonecrosis of the jaw (MRONJ) through the upper right central incisor extraction followed by intravenous bisphosphonate administration. METHODS: Forty five rats underwent the upper right central incisor tooth extraction were divided in 2 groups: Group I - experimental group, 30 rats received an intravenous administration protocol of zoledronic acid 35µg/kg into the tail vein every two weeks, totalizing four administrations, during eight weeks of administration, previously the extraction, and Group II - control group, 15 rats didn't received any medication before extraction. The groups were subdivided in postoperative periods: 14/28/42 days. Clinical analysis and microtomography were performed to verify the presence of osteonecrosis. In addition, descritive histological analysis of hematoxylin-eosin stained sections was performed to evaluate the presence of osteonecrosis or necrotic foci. RESULTS: Twelve (40%) rats, from experimental group, showed clinical signs of MRONJ (p=0.005), however, all samples showed imaginologic findings like osteolysis and loss of integrity of the cellular walls (p≤0.001). Microscopic evaluation revealed osteonecrosis areas with microbial colonies and inflammatory infiltrate (p≤0.001). In the control group, all animals presented the chronology of a normal wound healing. CONCLUSIONS: The presence of medication-related osteonecrosis of the jaw after maxillary central incisor extraction in rats. This new experimental model may be considered an option for the study of MRONJ.

Effect of crown-to-implant ratio on peri-implant stress: a finite element analysis.

The aim of this study was to evaluate stress distribution in the fixation screws and bone tissue around implants in single-implant supported prostheses with crowns of different heights (10, 12.5, 15 mm - crown-to-implant ratio 1:1, 1.25:1, 1.5:1, respectively). It was designed using three 3-D models. Each model was developed with a mandibular segment of bone block including an internal hexagon implant supporting a screw-retained, single metal-ceramic crown. The crown height was set at 10, 12.5, and 15 mm with crown-to-implant ratio of 1:1, 1.25:1, 1.5:1, respectively. The applied forces were 200N (axial) and 100 N (oblique). The increase of crown height showed differences with the oblique load in some situations. By von Mises' criterion, a high stress area was concentrated at the implant/fixation screw and abutment/implant interfaces at crown-to-implant ratio of 1:1, 1.25:1, 1.5:1, respectively. Using the maximum principal criteria, the buccal regions showed higher traction stress intensity, whereas the distal regions showed the largest compressive stress in all models. The increase of C/I ratio must be carefully evaluated by the dentist since the increase of this C/I ratio is proportional to the increase of average stress for both screw fixation (C/I 1:1 to 1:1.25 ratio=30.1% and C/I 1:1 to 1:1.5 ratio=46.3%) and bone tissue (C/I 1:1 to 1:1.25 ratio=30% and C/I 1:1 to 1:1.5 ratio=51.5%).

Influence of tapered and external hexagon connections on bone stresses around tilted dental implants: three-dimensional finite element method with statistical analysis.

BACKGROUND: The purpose of this study is to analyze the tension distribution on bone tissue around implants with different angulations (0°, 17°, and 30°) and connections (external hexagon and tapered) through the use of three-dimensional finite element and statistical analyses. METHODS: Twelve different configurations of three-dimensional finite element models, including three inclinations of the implants (0°, 17°, and 30°), two connections (an external hexagon and a tapered), and two load applications (axial and oblique), were simulated. The maximum principal stress values for cortical bone were measured at the mesial, distal, buccal, and lingual regions around the implant for each analyzed situation, totaling 48 groups. Loads of 200 and 100 N were applied at the occlusal surface in the axial and oblique directions, respectively. Maximum principal stress values were measured at the bone crest and statistically analyzed using analysis of variance. Stress patterns in the bone tissue around the implant were analyzed qualitatively. RESULTS: The results demonstrated that under the oblique loading process, the external hexagon connection showed significantly higher stress concentrations in the bone tissue (P <0.05) compared with the tapered connection. Moreover, the buccal and mesial regions of the cortical bone concentrated significantly higher stress (P <0.005) to the external hexagon implant type. Under the oblique loading direction, the increased external hexagon implant angulation induced a significantly higher stress concentration (P = 0.045). CONCLUSIONS: The study results show that: 1) the oblique load was more damaging to bone tissue, mainly when associated with external hexagon implants; and 2) there was a higher stress concentration on the buccal region in comparison to all other regions under oblique load.

An esthetics rehabilitation with computer-aided design/ computer-aided manufacturing technology.

AIM: This paper describes a case of a rehabilitation involving Computer Aided Design/Computer Aided Manufacturing (CAD-CAM) system in implant supported and dental supported prostheses using zirconia as framework. BACKGROUND: The CAD-CAM technology has developed considerably over last few years, becoming a reality in dental practice. Among the widely used systems are the systems based on zirconia which demonstrate important physical and mechanical properties of high strength, adequate fracture toughness, biocompatibility and esthetics, and are indicated for unitary prosthetic restorations and posterior and anterior framework. CASE DESCRIPTION: All the modeling was performed by using CAD-CAM system and prostheses were cemented using resin cement best suited for each situation. CONCLUSION: The rehabilitation of the maxillary arch using zirconia framework demonstrated satisfactory esthetic and functional results after a 12-month control and revealed no biological and technical complications. CLINICAL SIGNIFICANCE: This article shows the important of use technology CAD/CAM in the manufacture of dental prosthesis and implant-supported.

A 3-D finite element study of the influence of crown-implant ratio on stress distribution.

The purpose of this study was to assess the influence of the crown height of external hexagon implants on the displacement and distribution of stress to the implant/bone system, using the three-dimensional finite element method. The InVesalius and Rhinoceros 4.0 softwares were used to generate the bone model by computed tomography. Each model was composed of a bone block with one implant (3.75 x 10.0 mm) with external hexagon connections and crowns with 10 mm, 12.5 mm and 15 mm in height. A 200 N axial and a 100 N oblique (45°) load were applied. The models were solved by the NeiNastran 9.0 and Femap 10.0 softwares to obtain the results that were visualized by maps of displacement, von Mises stress (crown/implant) and maximum principal stress (bone). The crown height under axial load did not influence the stress displacement and concentration, while the oblique loading increased these factors. The highest stress was observed in the neck of the implant screw on the side opposite to the loading. This stress was also transferred to the crown/platform/bone interface. The results of this study suggest that the increase in crown height enhanced stress concentration at the implant/bone tissue and increased displacement in the bone tissue, mainly under oblique loading.

Maxillary bone defect reconstruction using porous polyethylene implants.

PURPOSE: The aim of this study was to evaluate the bone repair process in the maxillary sinus in monkeys treated with high-density porous polyethylene (Medpor) METHODS: Four capuchin monkeys (Cebus apella) were submitted to bilateral horizontal osteotomies in the anterior wall of the maxillary sinus and divided into 2 groups: control group, left side with no implants, and porous polyethylene group, right side with Medpor. After a period of 145 days after implant placement, the maxillae were removed for histologic and histometric analyses. RESULTS: Bone repair in osteotomized areas took place by connective tissue in 58.5% and 58.7% in the control group and the porous polyethylene group, respectively. In the contact surface with Medpor, bone repair occurred in 41.3%. CONCLUSIONS: Medpor was not reabsorbed within the period of this study and allowed bone repair surrounding it. The porous polyethylene constitutes a feasible alternative for bone defect reconstruction.

Prosthetic treatments for patients with oronasal communication.

The prosthetic treatments play a role in the rehabilitation of patients with congenital and acquired cleft palate. To prepare the surgical field and/or correct inevitable sequelae of the surgery, the rehabilitation with obturator prosthesis is an auxiliary or complementary treatment to surgical treatments. In cases where the surgical treatment is contraindicated, the prosthetic rehabilitation becomes a definitive treatment. The denture is planned and fabricated according to each patient. Therefore, the aim of this study was to discuss the prosthetic rehabilitation performed in patients with oronasal communication.

Craniofacial implants success in facial rehabilitation.

The use of craniofacial implants is an effective treatment for patients with deformities, burns, and cancer sequelae. The sites with the most successful implants are the auricular, nasal, and orbital regions. Furthermore, other factors can affect the implant longevity such as irradiated area, surgical technique, bone quality and quantity, macrostructure and microstructure of the implant, maintenance, and systemic factors.

Photoelastic analysis of the influence of platform switching on stress distribution in implants.

The aim of this study was to evaluate the stress distribution of platform switching implants using a photoelastic method. Three models were constructed of the photoelastic resin PL-2, with a single implant and a screw-retained implant-supported prosthesis. These models were Model A, platform 5.0 mm/abutment 4.1 mm; Model B, platform 4.1 mm/abutment 4.1 mm; and Model C, platform 5.00 mm/abutment 5.00 mm. Axial and oblique (45°) loads of 100 N were applied using a Universal Testing Machine (EMIC DL 3000). Images were photographed with a digital camera and visualized with software (AdobePhotoshop) to facilitate the qualitative analysis. The highest stress concentrations were observed at the apical third of the 3 models. With the oblique load, the highest stress concentrations were located at the implant apex, opposite the load application. Stress concentrations decreased in the cervical region of Model A (platform switching), and Models A (platform switching) and C (conventional/wide-diameter) displayed similar stress magnitudes. Finally, Model B (conventional/regular diameter) displayed the highest stress concentrations of the models tested.