Development and validation of a sensitive LC-MS/MS assay of GT-14, a novel Gαi2 inhibitor, in rat plasma, and its application in pharmacokinetic study.

A sensitive and selective LC-MS/MS method was developed and validated for the quantitation of a novel Gαi2 inhibitor, GT-14, in rat plasma using a SCIEX 6500+ triple QUAD LC-MS system equipped with an ExionLC UHPLC unit. GT-14 (m/z 265.2 → 134.1) and griseofulvin (Internal Standard, IS) (m/z 353.1 → 285.1) were detected in a positive mode by electrospray ionization (ESI) using multiple reaction monitoring (MRM). The assay was linear in the concentration range of 0.78-1000 ng/mL in rat plasma. Both accuracy and precision values were within the acceptance criteria of ±15 %, as established by FDA guidance. The matrix effect was negligible from plasma, with signal percentages of 98.5-106.9 %. The mean recovery was 104.5 %, indicating complete extraction of GT-14 from plasma. GT-14 was found to be stable under different experimental conditions. The validated method was successfully applied to evaluate plasma protein binding and in vivo pharmacokinetics of GT-14 in rats.

Pharmacokinetic behaviors of soft nanoparticulate formulations of chemotherapeutics.

Chemotherapeutic treatment with conventional drug formulations pose numerous challenges, such as poor solubility, high cytotoxicity and serious off-target side effects, low bioavailability, and ultimately subtherapeutic tumoral concentration leading to poor therapeutic outcomes. In the field of Nanomedicine, advances in nanotechnology have been applied with great success to design and develop novel nanoparticle-based formulations for the treatment of various types of cancer. The approval of the first nanomedicine, Doxil® (liposomal doxorubicin) in 1995, paved the path for further development for various types of novel delivery platforms. Several different types of nanoparticles, especially organic (soft) nanoparticles (liposomes, polymeric micelles, and albumin-bound nanoparticles), have been developed and approved for several anticancer drugs. Nanoparticulate drug delivery platform have facilitated to overcome of these challenges and offered key advantages of improved bioavailability, higher intra-tumoral concentration of the drug, reduced toxicity, and improved efficacy. This review introduces various commonly used nanoparticulate systems in biomedical research and their pharmacokinetic (PK) attributes, then focuses on the various physicochemical and physiological factors affecting the in vivo disposition of chemotherapeutic agents encapsulated in nanoparticles in recent years. Further, it provides a review of the current landscape of soft nanoparticulate formulations for the two most widely investigated anticancer drugs, paclitaxel, and doxorubicin, that are either approved or under investigation. Formulation details, PK profiles, and therapeutic outcomes of these novel strategies have been discussed individually and in comparison, to traditional formulations. This article is categorized under: Nanotechnology Approaches to Biology > Cells at the Nanoscale Diagnostic Tools > In Vivo Nanodiagnostics and Imaging Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease.

Surfactant Mediated Accelerated and Discriminatory In Vitro Drug Release Method for PLGA Nanoparticles of Poorly Water-Soluble Drug.

In vitro drug release testing is an important quality control tool for formulation development. However, the literature has evidence that poly-lactide-co-glycolide (PLGA)-based formulations show a slower in vitro drug release than a real in vivo drug release. Much longer in vitro drug release profiles may not be reflective of real in vivo performances and may significantly affect the timeline for a formulation development. The objective of this study was to develop a surfactant mediated accelerated in vitro drug release method for the PLGA nanoparticles (NPs) of a novel chemotherapeutic agent AC1LPSZG, a model drug with a poor solubility. The Sotax USP apparatus 4 was used to test in vitro drug release in a phosphate buffer with a pH value of 6.8. The sink conditions were improved using surfactants in the order of sodium lauryl sulfate (SLS) < Tween 80 < cetyltrimethylammonium bromide (CTAB). The dissolution efficiency (DE) and area under the dissolution curve (AUC) were increased three-fold when increasing the CTAB concentration in the phosphate buffer (pH 6.8). Similar Weibull release kinetics and good linear correlations (R2~0.99) indicated a good correlation between the real-time in vitro release profile in the phosphate buffer (pH 6.8) and accelerated release profiles in the optimized medium. This newly developed accelerated and discriminatory in vitro test can be used as a quality control tool to identify critical formulation and process parameters to ensure a batch-to-batch uniformity. It may also serve as a surrogate for bioequivalence studies if a predictive in vitro in vivo correlation (IVIVC) is obtained. The results of this study are limited to AC1LPSZG NPs, but a similar consideration can be extended to other PLGA-based NPs of drugs with similar properties and solubility profiles.

Longitudinal Impact of Acute Spinal Cord Injury on Clinical Pharmacokinetics of Riluzole, a Potential Neuroprotective Agent.

Riluzole, a benzothiazole sodium channel blocker that received US Food and Drug Administration approval to attenuate neurodegeneration in amyotrophic lateral sclerosis in 1995, was found to be safe and potentially efficacious in a spinal cord injury (SCI) population, as evident in a phase I clinical trial. The acute and progressive nature of traumatic SCI and the complexity of secondary injury processes can alter the pharmacokinetics of therapeutics. A 1-compartment with first-order elimination population pharmacokinetic model for riluzole incorporating time-dependent clearance and volume of distribution was developed from combined data of the phase 1 and the ongoing phase 2/3 trials. This change in therapeutic exposure may lead to a biased estimate of the exposure-response relationship when evaluating therapeutic effects. With the developed model, a rational, optimal dosing scheme can be designed with time-dependent modification that preserves the required therapeutic exposure of riluzole.

Rational design and development of a stable liquid formulation of riluzole and its pharmacokinetic evaluation after oral and IV administrations in rats.

Enterally administered riluzole is currently being investigated in a Phase II/III clinical trial for the treatment of acute spinal cord injury (SCI). Many SCI patients suffer from severe motor dysfunction and exhibit swallowing difficulties and cannot swallow riluzole tablets. The purpose of the present study was to develop a liquid solution formulation of riluzole, which can be administered more easily to this patient population with the capability to adjust the dose if needed. Riluzole was solubilized using water miscible organic solvents, namely, polyethylene glycol 400, propylene glycol and glycerin. A Central Composite Design (CCD) approach was used to develop an optimum co-solvent composition that can solubilize the entire 50 mg dose of riluzole in 5 ml. A three-factor five-level design was employed to investigate the effects of composition of co-solvents on riluzole solubility. The selected optimum formulation consists of 15% v/v PEG 400, 20% v/v propylene glycol and 10% v/v glycerin, with riluzole concentration of 10 mg/ml. The optimum composition was assessed for stability at different temperatures. Satisfactory stability was obtained at room temperature and 4 °C (t90 of 17 and 35 months, respectively). The optimum formulation of riluzole was suitable for both oral and intravenous administrations. Single dose pharmacokinetic studies of the optimum formulation by oral and IV routes were evaluated in rats, using commercially available Rilutek® tablets as a reference. The co-solvent formulation was well tolerated both orally and intravenously. In comparison to the commercial tablet, the co-solvent formulation had a faster rate of absorption and more sustained plasma levels with a significantly longer elimination half-life. Higher concentrations of riluzole in brain and spinal cord were achieved from co-solvent formulation as compared to tablet. The riluzole solution formulation is stable and offers advantages of ease of administration, consistent dosing, rapid onset and longer duration of action, better availability at site of action which can be extremely beneficial for the therapy in SCI patients.

UPLC-MS/MS assay of riluzole in human plasma and cerebrospinal fluid (CSF): Application in samples from spinal cord injured patients.

In the present study, a sensitive and robust LC-MS/MS method has been developed and validated for the quantification of riluzole in human plasma and cerebrospinal fluid (CSF) in clinical samples from patients with spinal cord injury (SCI). Riluzole and its labeled internal standard (IS) were isolated from plasma and CSF by liquid-liquid extraction using ethyl acetate. Riluzole (m/z 235→166) and IS (m/z 238→169) were detected by electrospray ionization (ESI) using multiple reaction monitoring (MRM) in a positive mode. The assay was linear in the concentration range of 0.5 (LLOQ, signal/noise ratio>10)-800ng/ml in plasma, and 1.0 (LLOQ)-800ng/ml in CSF samples. The intra- and inter-day accuracy in plasma were 94.2-110.0% and 97.8-102.0%, respectively, and those in CSF were 87.6-105.1% and 91.9-98.8%, respectively. The intra- and inter-day precision were 2.2-7.2% and 4.0-9.1%, respectively, in plasma, and 1.4-14.1% and 2.6-11.5%, respectively in CSF. Matrix effect was negligible from both matrices with signal percentages of 97.6-100.6% in plasma and 99.4-106.4% in CSF. The recoveries were >75% in plasma, >84% in CSF with low protein (53.9mg/dl), and >68% in CSF with high protein (348.2mg/dl). This method was successfully applied to quantify riluzole concentrations in plasma and CSF from patients with SCI.

Solid-state characterization of nevirapine.

The purpose of this investigation is to characterize nevirapine from commercial samples and samples crystallized from different solvents under various conditions. The solid-state behavior of nevirapine samples was investigated using a variety of complementary techniques such as microscopy (optical, polarized, hot stage microscopy), differential scanning calorimeter, thermogravimetric analysis, Fourier transform infrared spectroscopy and powder X-ray diffractometry. The commercial samples of nevirapine had the same polymorphic crystalline form with an anhedral crystal habit. Intrinsic dissolution of nevirapine was similar for both the commercial batches. Powder dissolution showed pH dependency, with maximum dissolution in acidic pH and there was no significant effect of particle size. The samples recrystallized from different solvent systems with varying polarity yielded different crystal habits. Stirring and degrees of supersaturation influenced the size and shape of the crystals. The recrystallized samples did not produce any new polymorphic form, but weak solvates with varying crystal habit were produced. Recrystallized samples showed differences in the x-ray diffractograms. However, all the samples had the same internal crystal lattice as revealed from their similar melting points and heat of fusion. The intrinsic dissolution rate of recrystallized samples was lower than the commercial sample. It was found that the compression pressure resulted in desolvation and partial conversion of the crystal form. After compression, the recrystallized samples showed similar x-ray diffractograms to the commercial sample. Amorphous form showed slightly higher aqueous solubility than the commercial crystalline form.

Development and validation of RP-HPLC and ultraviolet spectrophotometric methods of analysis for the quantitative estimation of antiretroviral drugs in pharmaceutical dosage forms.

A high-performance liquid chromatographic and an UV spectrophotometric method were developed and validated for the quantitative determination of three antiretroviral drugs viz. Lamivudine, Stavudine and Nevirapine that constitute one of the first line regimens in antiretroviral therapy. The different analytical performance parameters such as linearity, precision, accuracy, specificity, limit of detection (LOD) and limit of quantification (LOQ) were determined according to International Conference on Harmonization ICH Q2B guidelines. Chromatography was carried out by isocratic technique on a reversed-phase C-18 SYMMETRY column with mobile phase based and optimized depending on the polarity of the molecules. The UV spectrophotometric determinations were performed at 270, 265 and 313 nm for Lamivudine, Stavudine and Nevirapine, respectively. The linearity of the calibration curves for each analyte in the desired concentration range is good (r(2)>0.999) by both the HPLC and UV methods. Both the methods were accurate and precise with recoveries in the range of 97 and 103% for all the three drugs and relative standard deviation (R.S.D.) <5%. Moreover, the accuracy and precision obtained with HPLC correlated well with the UV method which implied that UV spectroscopy can be a cheap, reliable and less time consuming alternative for chromatographic analysis. The proposed methods are highly sensitive, precise and accurate and hence were successfully applied for the reliable quantification of API content in the commercial formulations of Lamivudine, Stavudine and Nevirapine.

pH-dependent functional activity of P-glycoprotein in limiting intestinal absorption of protic drugs 1. Simultaneous determination of quinidine and permeability markers in rat in situ perfusion samples.

A simple, specific and sensitive reversed-phase high performance liquid chromatographic (RP-HPLC) method with UV absorbance detection was developed and validated for simultaneous determination of quinidine, verapamil and passive permeability markers, in samples obtained from rat intestinal in situ single-pass perfusion studies. Chromatography was carried out on C18 column with mobile phase comprising of acetate buffer (pH 5.0) and methanol in the ratio of 40:60 (v/v) pumped at a flow rate of 0.6 ml/min and UV detection was employed at 230 and 275 nm. The average retention times for hydrochlorthiazide, frusemide, quinidine, propranolol, and verapamil were 4.9, 5.8, 6.9, 8.9 and 11.3 min, respectively. The calibration curves were linear (R(2)>0.9995) in the selected range for each analyte. The method is specific and sensitive with limit of quantification as 25 ng/ml for quinidine and verapamil. The intra- and inter-day accuracy and precision were found to be good for all the five analytes. The method was found to be reliable in permeability determination and to estimate pH-dependent P-glycoprotein (P-gp)-mediated efflux transport of quinidine. Weak bases quinidine, propranolol and verapamil showed pH-dependent permeability, where quinidine permeability increased by 3.6-fold when the luminal pH was changed from pH 4.5-7.4. Inhibition of P-gp by verapamil (200 microM) indicated that about 68% and only 35% of passive transport of quinidine was attenuated by P-gp-mediated efflux at pH 4.5 and 7.4, respectively. In conclusion, low passive transport rates of weakly basic P-gp substrates at lower pH, may lead to more accessibility of these molecules to P-gp within enterocytes thus resulting in pH-dependent functional activity of P-gp as protic drugs moves along the gastrointestinal tract.

Simultaneous determination of digoxin and permeability markers in rat in situ intestinal perfusion samples by RP-HPLC.

A simple, sensitive and specific reversed-phase high performance liquid chromatographic (RP-HPLC) assay for simultaneous determination of digoxin and permeability markers, in samples obtained from intestinal in situ single-pass perfusion studies, was developed and validated. Chromatography was carried on C-18 column with mobile phase comprising of acetate buffer (pH 3.0), acetonitrile and methanol in the ratio of 50:25:25 (v/v/v), was pumped at a flow rate of 0.5 ml/min and UV detection was employed at 220 nm. The average retention times for phenolred, propranolol, frusemide and digoxin were 9.1, 10.7, 12.9 and 15.3 min, respectively. The calibration curves were linear (R(2) > 0.998) in the range for each analyte. The method is specific and sensitive with limit of quantification of 25 ng/ml for digoxin and frusemide and 10 ng/ml for phenolred and propranolol. The method is accurate and precise with recoveries of digoxin in the range of 95.2 and 103.2% and relative standard deviation (R.S.D.) <5%. We found that this method was simple and reliable in permeability determination and to estimate the contribution of P-glycoprotein in limiting intestinal absorption.