Interaction of plants and metal nanoparticles: Exploring its molecular mechanisms for sustainable agriculture and crop improvement.

Metal nanoparticles offer promising prospects in agriculture, enhancing plant growth and ensuring food security. Silver, gold, copper, and zinc nanoparticles possess unique properties making them attractive for plant applications. Understanding molecular interactions between metal nanoparticles and plants is crucial for unlocking their potential to boost crop productivity and sustainability. This review explores metal nanoparticles in agriculture, emphasizing the need to understand these interactions. By elucidating mechanisms, it highlights the potential for enhancing crop productivity, stress tolerance, and nutrient-use efficiency, contributing to sustainable agriculture and food security. Quantifying benefits and risks reveal significant advantages. Metal nanoparticles enhance crop productivity by 20% on average and reduce disease incidence by up to 50% when used as antimicrobial agents. They also reduce nutrient leaching by 30% and enhance soil carbon sequestration by 15%, but concerns about toxicity, adverse effects on non-target organisms, and nanoparticle accumulation in the food chain must be addressed. Metal nanoparticles influence cellular processes including sensing, signaling, transcription, translation, and post-translational modifications. They act as signaling molecules, activate stress-responsive genes, enhance defense mechanisms, and improve nutrient uptake. The review explores their catalytic role in nutrient management, disease control, precision agriculture, nano-fertilizers, and nano-remediation. A bibliometric analysis offers insights into the current research landscape, highlighting trends, gaps, and future directions. In conclusion, metal nanoparticles hold potential for revolutionizing agriculture, enhancing productivity, mitigating environmental stressors, and promoting sustainability. Addressing risks and gaps is crucial for their safe integration into agricultural practices.

Efficacy of anthocyanin, kaolinite and cabbage leaves-derived biochar for simultaneous removal of lead, copper and metoprolol from water.

Simultaneous removal of toxic elements and pharmaceutical compounds at environmentally relevant concentrations in aqueous solution is challenging. Modification of biochar using environmental materials has attracted significant attention in wastewater treatment, while pristine biochar has several limitations in the simultaneous removal of Lead (Pb2+), Copper (Cu2+), and metoprolol. We investigated the efficacy of biochar composites using waste cabbage leaves-derived biochar with kaolinite, and anthocyanin for simultaneous removal of Pb2+, Cu2+, and metoprolol from water. Using ball milling, the surface area and functional groups of adsorbents were improved via breaking the biochar grains into ultrafine particles. Ball-milled biochar derived from waste cabbage leaves significantly increased Pb2+, Cu2+, and metoprolol adsorption by 105, 71, and 213%, respectively. Results of Brunauer Emmett Teller surface area, Fourier transform infrared and X-ray photoelectron spectroscopies showed that surface area of non-milled biochar improved nearly ten-fold following ball-milling, while several oxygen containing acidic functional groups also increased. The adsorbents resulted in high removal efficiency for Pb2+ (162.9 mg/g) and Cu2+ (48.5 mg/g) in ball milled-kaolinite composite biochar (BMKB) and 76.3 mg/g (metoprolol), respectively in ball milled-anthocyanin composite biochar (BMAB). The simultaneous sorption of Pb2+, Cu2+, and metoprolol in an aqueous solution to BMAB and BMKB, showed that the adsorption capacity followed the order of Pb2+ >Cu2+ > metoprolol in both types of ball-milled biochars. BMKB achieved a high adsorption capacity for Pb2+ and Cu2+ (59 mg/g and 50 mg/g), respectively, while BMAB exhibited an adsorption capacity 22.3 mg/g for metoprolol. It was postulated that sorption of Pb2+, Cu2+ and metoprolol involved multiple adsorption mechanisms namely surface complexation, π-π interaction, H-bond, pore filling, and ion bridging. The findings of this study revealed that ball milling is a potential technology in producing a highlyefficient adsorbent to remediate multi-contaminants in aqueous solution.

Biogas slurry-derived dissolved organic matter inhibited oxytetracycline adsorption by tropical agricultural soils.

The increasing presence of oxytetracycline (OTC) in agricultural soils has raised global environmental concerns. We investigated the environmental behavior and fate of OTC in two types of tropical agricultural soils, focusing on the impact of dissolved organic matter (DOM) from biogas slurry. Techniques such as three-dimensional excitation-emission matrix fluorescence spectroscopy (3D-EEM), Fourier Transform Infrared (FTIR), X-ray photoelectron spectroscopy (XPS), and Ultraviolet-visible spectrophotometer (UV-vis) were used to explore the adsorption mechanisms. Our findings revealed that biogas slurry-derived DOM decreased the OTC adsorption on soils and extended the time to reach adsorption equilibrium. Specifically, the equilibrium adsorption of OTC by the two soils decreased by 19.41 and 15.32 %, respectively. These adsorption processes were effectively modelled by Elovich, intraparticle diffusion, linear, and Freundlich thermodynamic models. Thermodynamic parameters suggested that OTC adsorption onto soils was spontaneous and endothermic, with competitive interactions between biogas slurry-derived DOM and OTC molecules intensifying at higher DOM concentrations. The adsorption mechanisms were governed by both physical and chemical processes. Furthermore, the presence of Ca2+ and Na+ ions significantly inhibited OTC adsorption. These insights advanced our understanding of the fate and risk of OTC in soil environments influenced by DOM, contributing to more informed agricultural and environmental management practices.

Can pyrolysis handle biomedical wastes?: Assessing the potential of various biomedical waste treatment technologies in tackling pandemics.

Globally, COVID-19 has not only caused tremendous negative health, social and economic impacts, but it has also led to environmental issues such as a massive increase in biomedical waste. The biomedical waste (BMW) was generated from centralized (hospitals, clinics, and research facilities) and extended (quarantine camps, COVID-19 test camps, and quarantined homes) healthcare facilities. Many effects, such as the possibility of infection spread, unlawful dumping/disposal, and an increase in toxic emissions by common BMW treatment facilities, are conjectured because of the rise in waste generation. However, it is also an opportunity to critically analyze the current BMW treatment scenario and implement changes to make the system more economical and environmentally sustainable. In this review, the waste disposal guidelines of the BMW management infrastructure are critically analyzed for many functional parameters to bring out possible applications and limitations of individual interventions. In addition, an investigation was made to select appropriate technology based on the environmental setting.

From scraps to purification: innovative use of food waste-derived hydrochar in eradicating pharmaceutical pollutants.

Chemical products (CPs) such as carbamazepine and naproxen, present in aquatic environments, pose significant risks to both aquatic life and human health. This study investigated the use of hydrothermally carbonized food waste-derived hydrochar (AC-HTC) at three distinct temperatures (200, 250, and 300 °C) as an adsorbent to remove these CPs from water. Our research focused on the impact of hydrothermal carbonization temperature on hydrochar properties and the effects of chemical activation with phosphoric acid on adsorption capacity. Hydrothermal carbonization increased the hydrochar's surface area from 1.47 to 7.52 m2/g, which was further enhanced to 32.81 m2/g after activation with phosphoric acid. Batch adsorption experiments revealed that hydrochar produced at 250 °C (AC-HTC-250) demonstrated high adsorption capacities of 49.10 mg/g for carbamazepine and 14.35 mg/g for naproxen, outperforming several conventional adsorbents. Optimal adsorption occurred at pH 4, aligning well with the Langmuir and pseudo-first-order models. The hydrochar showed potential for regeneration and multiple uses, suggesting its applicability in sustainable wastewater treatment. Future research will explore scalability and effectiveness against a broader range of pollutants.

Photocatalytic degradation of p-aminobenzoic acid on N-biomass charcoal etched with Fe-Al-bilayer hydroxide: New insights through spectroscopic investigation.

We investigated the photocatalytic property of etched iron­aluminum layered double hydroxide (LDH) composites using urea-modified biochar (N-BC) carrier to degrade para-aminobenzoic acid (PABA), a refractory organic pollutant. The prepared FeAl-LDH@FeSx-N-BC composite exhibited excellent photocatalytic performance, attributed to the enhanced photogenerated charge-carrier separation by the etched LDH and the improved comparative surface areas by the doped N-BC. The composite photocatalytically degraded 96 % of PABA. The performance was affected by solute concentration, pH and photocatalyst dose. Adding p-benzoquinone and EDTA-2Na significantly decreased the degradation rate, suggesting that superoxide radicals and holes were co-involved in PABA degradation. The excellent PABA removal efficiency was consistent for three consecutive runs. The samples' reactive oxygen species was confirmed, as electron paramagnetic reverberation explained the photodegradation mechanism. Under xenon lamp irradiation, two PABA photocatalytic degradation pathways were proposed using Liquid Chromatograph Mass Spectrometer (LCMS) and density functional theory. As expected, FeAl-LDH@FeSx-N-BC showed excellent photocatalytic performance, expanding a new direction and possibility for future photocatalytic treatment of water pollutants.

Evaluation of dissipation kinetic models to describe trifluralin degradation in soil and assessing the uncertainty of the half-life estimate.

In Australia, trifluralin is one of the commonly used herbicides to manage annual grasses and some broadleaf weeds. However, it may have some ecosystem impacts such as high toxicity to terrestrial and aquatic life, so it is vital to monitor the degradation of trifluralin for a considerable period for environmental safety. For risk assessment purposes, it is necessary to estimate the half-life of trifluralin, which is often evaluated using derived mathematical dissipation models. In the literature, bi-exponential (BEXP) and gamma models were suggested for modelling the dissipation of trifluralin in soil. Both models provide the half-life estimate without discussing the uncertainty of the estimate, which is a shortcoming in the literature. In this paper, we used simulation to illustrate the importance of estimate's uncertainty (standard error) and demonstrated a method to compute the standard error for the half-life estimate mathematically for kinetic dissipation models. Later, we evaluated the performance of the two suggested models using statistical indices. The computation of the half-life and the standard error of the half-life estimate were discussed. This allows us to describe the inference of the half-life parameter and determine whether the half-life estimates are significantly different against the co-variate (moisture) levels. We demonstrated the method to calculate the standard error of the half-life of trifluralin, which allows us to determine the statistical difference between the estimates. In this study, we found that the half-life of trifluralin in soil tends to increase with increasing moisture levels, and the half-life of trifluralin in soil with 100% moisture level is significantly greater than 40% and 70% moisture levels. Our findings suggest that soil moisture levels should be carefully considered before trifluralin application to minimize the non-target environmental damage.

Landfill-mined soil-like fraction (LMSF) use in biopolymer composting: Material pre-treatment, bioaugmentation and agricultural prospects.

Polylactic Acid (PLA) based compostable bioplastic films degrade under thermophilic composting conditions. The purpose of our study was to understand whether sample pre-treatment along with bioaugmentation of the degradation matrix could reduce the biodegradation time under a simulated composting environment. Sepcifically, we also explored whether the commercial composts could be replaced by landfill-mined soil-like fraction (LMSF) for the said application. The effect of pre-treatment on the material was analysed by tests like tensile strength analysis, hydrophobicity analysis, morphological analysis, thermal degradation profiling, etc. Subsequently, the degradation experiment was performed in a simulated composting environment following the ASTM D5338 standard, along with bioaugmentation in selected experimental setups. When the novel approach of material pre-treatment and bioaugmentation were applied in combination, the time necessary for 90% degradation was reduced by 27% using compost and by 23% using LMSF. Beyond the improvement in degradation rate, the water holding capacity increased significantly for the degradation matrices. With pH, C: N ratio and microbial diversity tested to be favourable through 16s metabarcoding studies, material pre-treatment and bioaugmentation allow LMSF to not only replace commercial compost in polymer degradation but also find immense application in the agricultural sector of drought-affected areas (for better water retention) after it has been used for PLA degradation.

Effect of iron nanoparticles on chromium adsorption in aqueous solution using magnetic biochar: A site energy distribution analysis.

The effects of adding green-synthesized magnetic iron-containing nanoparticles (GSMFe) onto biochar in aqueous solution for the adsorptive removal of hexavalent chromium [Cr(VI)] were investigated in this study. Nanocomposites, denoted as green synthesis magnetic biochar (GSMB), were created using a green synthesis technique with white tea residue to introduce GSMFe into biochar. Six adsorbents, varying in GSMFe content, were tested for their effectiveness in eliminating Cr(VI), a globally significant hazardous heavy metal. The results demonstrated that incorporating GSMFe into biochar led to significant improvements in adsorption capacity and saturation magnetization. With an increasing amount of GSMFe, the maximum adsorption capacity increased from 2.47 mg/g (EWTWB) to 9.11 mg/g (GSMB4). The highest saturation magnetization was achieved at 13.4 Am2/kg at GSMB4. Similarly, surface areas rose up to 72.9 m2/g at GSMB3 but declined thereafter due to GSMFe aggregation and pore blockage. Sorption behavior for Cr(VI) was assessed using five isotherm models, with the Redlich-Peterson model showing the best fit. The analysis of approximate site energy distribution (SED) indicates that the incorporation of GSMFe enhances the frequency of the entire range of sorption energy sites, while the biochar matrix contributes to a slight increase in medium sorption energy sites within the GSMFe. Among the GSMBs, the difference were more pronounced at low-energy sites than at high-energy sites. At higher energy sites (27,500-40,000 J/mol), sorption site frequencies remained similar, regardless of GSMFe content and associated physicochemical properties. For sorption energy site values exceeding 17,500 J/mol (Cr(VI) concentration below 50 mg/L), GSMB2 is regarded as a more practical choice due to its relatively large area under the frequency distribution curve and commendable cost-effectiveness.

Electrification of public buses in Jakarta, Indonesia: A life cycle study.

Indonesia plans to mitigate the environmental emissions, particularly the carbon emissions, from the transport by replacing conventional buses with battery electric buses (BEBs). However, there are limited studies on the potential environmental benefits of BEBs and mostly focused on carbon emissions. In this study, the environmental impacts of adopting BEBs in Jakarta's public transportation system were examined using Life Cycle Assessment (LCA) to better understand its potential environmental impacts. Using LCA, the environmental impacts of BEBs were also compared with conventional buses across their life cycles, which included raw materials extraction until the end of life stages. The results showed diesel buses have generally lower environmental impacts than BEBs due to the high share of fossil fuels in the electricity generation in Indonesia. Scenario analysis showed that extending the life cycle, using different battery disposal methods, and using battery reuse could lead to higher environmental benefits in using BEBs. Among the scenarios considered in the study, prolonging the lifespan of the bus to 32 years, using electricity mix with a higher share of renewable energy and reusing the lithium-ion batteries, BEBs would have lesser environmental impact per kilometre. In particular, the particulate matter formation (PM2.5) dropped 21 %, while the overall life cycle of BEB using the highest renewable scenario showed an average of 25 % improvement compared to the baseline scenario regarding environmental impact.

Waste to energy: Trending key challenges and current technologies in waste plastic management.

Due to the 'forever' degrading nature of plastic waste, plastic waste management is often complicated. The applications of plastic are ubiquitous and inevitable in many scenarios. Current global waste plastics production is ca. 3.5 MMT per year, and with the current trend, plastic waste production will reach 25,000 MMT by 2040. However, the rapid growth in plastic manufacture and the material's inherent nature resulted in the accumulation of a vast amount of plastic garbage. The current recycling rate is <10 %, while the large volumes of discarded plastic waste cause environmental and ecological problems. Recycling rates for plastic vary widely by region and type of plastic. In some developed countries, the recycling rate for plastics is around 20-30 %, while in many developing nations, it is much lower. These statistics highlight the magnitude of the plastic waste problem and the urgent need for comprehensive strategies to manage plastic waste more effectively and reduce its impact on the environment. This review critically analyses past studies on the essential and efficient techniques for turning plastic trash into treasure. Additionally, an attempt has been made to provide a comprehensive understanding of the plastic upcycling process, the 3Rs policy, and the life-cycle assessment (LCA) of plastic conversion. The review advocates pyrolysis as one of the most promising methods of turning plastic trash into valuable chemicals. In addition, plastic waste management can be severely impacted due to uncontrollable events, such as Covid 19 pandemic. Recycling and chemical upcycling can certainly bring value to the end-of-life plastic. However, the LCA analysis indicated there is still a huge scope for innovation in chemical upcycling area compared to mechanical recycling. The formulation of policies and heightened public participation could play a pivotal role in reducing the environmental repercussions of plastic waste and facilitating a shift towards a more sustainable future.

Adsorption of common greywater pollutants and nutrients by various biochars as potential amendments for nature-based systems: Laboratory tests and molecular dynamics.

Spruce wood and Typha (wetland plant) derived biochars pyrolyzed at 350 °C and 600 °C were tested for their sorption affinity for organic pollutants (diclofenac, methylparaben, benzotriazole and sodium 1-decanesulfonate) and nutrients (nitrate, ammonium, phosphate and boron) commonly found in greywater. Batch and column studies combined with molecular dynamics modelling determined the sorption capacity, kinetics, and described the underlying mechanisms. The spruce biochar (600 °C) exhibited the highest sorption capacity mainly for the tested organics. The dynamic test performed for spruce biochar (600 °C) showed that the magnitude of desorption was low, and the desorbed amount ranged between 3 and 11 %. Molecular dynamics modelling (a computational tool for elucidating molecular-level interactions) indicated that the increased sorption of nitrate and boron on spruce biochar (600 °C) could be attributed to hydrophobic interactions. The molecular dynamics shows that predominant adsorption of organic pollutants was governed by π-π stacking, with a minor role of hydrogen-bonding on the biochar surface. In summary, higher pyrolysis temperature biochar yielded greater adsorption capacity greywater borne contaminants and the reaction temperature (10-34 °C) and presence of anionic surfactant had a limited effect on the adsorption of organic pollutants, suggesting efficacious application of biochar in general for greywater treatment in nature-based systems.

Synthesis and commercialization of bioplastics: Organic waste as a sustainable feedstock.

Substituting synthetic plastics with bioplastics, primarily due to their inherent biodegradable properties, represents a highly effective strategy to address the current global issue of plastic waste accumulation in the environment. Advances in bioplastic research have led to the development of materials with improved properties, enabling their use in a wide range of applications in major commercial sectors. Bioplastics are derived from various natural sources such as plants, animals, and microorganisms. Polyhydroxyalkanoate (PHA), a biopolymer synthesized by bacteria through microbial fermentation, exhibits physicochemical and mechanical characteristics comparable to those of synthetic plastics. In response to the growing demand for these environmentally friendly plastics, researchers are actively investigating various cleaner production methods, including modification or derivatization of existing molecules for enhanced properties and new-generation applications to expand their market share in the coming decades. By 2026, the commercial manufacturing capacity of bioplastics is projected to reach 7.6 million tonnes, with Europe currently holding a significant market share of 43.5 %. Bioplastics are predominantly utilized in the packaging industry, indicating a strong focus of their application in the sector. With the anticipated rise in bioplastic waste volume over the next few decades, it is crucial to comprehend their fate in various environments to evaluate the overall environmental impact. Ensuring their complete biodegradation involves optimizing waste management strategies and appropriate disposal within these facilities. Future research efforts should prioritize exploration of their end-of-life management and toxicity assessment of degradation products. These efforts are crucial to ensure the economic viability and environmental sustainability of bioplastics as alternatives to synthetic plastics.

A novel 3-dimensional graphene-based cobalt-manganese bimetallic layered double hydroxide:Formation mechanism and performance in photo-assisted permonosulfate-activated degradation of sulfamethoxazole in aqueous solution.

Sulfamethoxazole (SMX) is a common antibiotic used mainly for bacterial treatment. In this study, a novel three-dimensional cobalt-manganese bimetallic layered double hydroxide graphene hydrogel (CoMn-LDHs/rGO) has been prepared for photo-assisted permonosulfate (PMS)-activated degradation of SMX in water. Compared with the CoMn-LDHs/rGO + PMS and CoMn-LDHs/rGO + Vis systems, the degradation effect of CoMn-LDHs/rGO + PMS + Vis system is the best, and the degradation effect of CoMn-LDHs/rGO system could reach more than 98% under the optimal conditions. After 10 cycles, the catalytic degradation performance of CoMn-LDHs/rGO system remained good, while effectively preventing the leaching of metal ions. Based on the synergistic effect of photocatalysis and PMS oxidation, electron spin resonance spectroscopy and quenching experiments showed that three active substances (•OH, •SO4- and O2•-) were involved in the degradation of SMX. Density functional theory and liquid chromatography-mass spectrometry (LC-MS) results further proposed the SMX degradation transformation calculation. As expected, the study of the reaction mechanism of 3D CoMn-LDHs/rGO assisted PMS activation under visible light provides an efficient and rapid method for the sustainable degradation of pollutants in water system.

A geotechnical perspective on soil-termite interaction: Role of termites in unsaturated soil properties.

The soil-insect interaction has gathered significant attention in the recent years due to its contribution to bio-cementation. Termites, as a group of cellulose-eating insects, alter physical (texture) and chemical (chemical composition) properties of soil. Conversely, physico-chemical properties of soil also influence termite activities. It is vital to understand the soil-termite interaction and their influence on hydraulic properties and shear strength of soil, which are related to a series of geotechnical engineering problems such as ground water recharge, runoff, erosion and stability of slopes. In this study, an attempt has been made to review the latest developments and research gaps in our understanding of soil-termite interaction within the context of geo-environmental engineering. The hydraulic properties and shear strength of termite modified soil were discussed with respect to soil texture, density and physico-chemical composition. The incorporation of hysteresis effect of soil water characteristic curve, and spatio-temporal variations of hydraulic conductivity and shear strength of termite modified soil is proposed to be considered in geotechnical engineering design and construction. Finally, the challenges and future trends in this research area are presented. The expertise from both geotechnical engineering and entomology is needed to plan future research with an aim to promote use of termites as maintenance engineers in geotechnical infrastructure.

Electrification of New Zealand transport: Environmental impacts and role of renewable energy.

New Zealand's goal to be carbon neutral by 2050 has led to the development of strategic policies and schemes to encourage the use of electric vehicles (EVs). However, most studies are focused on the greenhouse gas emissions of EVs while limited studies are available on their other potential environmental impacts. Using life cycle assessment (LCA), the environmental impacts of EV adoption, specifically the battery electric vehicle (BEV), were assessed to determine the future environmental challenges for New Zealand. Due to 87.1 % share of renewable sources of electricity generation in New Zealand in 2022, EV adoption has demonstrated its strong potential to reduce the CO2 emission of the transport sector. Results showed that lithium-ion battery (LIB), including production and disposal, is the major contributor to the environmental impacts of BEV adoption. The direct environmental impacts of BEV in New Zealand range from 0.34 % to 42.5 % across its life cycle. The results are sensitive to the assumptions of the driving range and number of LIB replacements where they could increase up to 34.5 % per km and up to 48.9 % per replacement of LIB on environmental impacts, respectively. Scenario analysis also showed that when the renewable energy share in electricity production is increased to 100 %, the environmental impacts of the BEV life cycle could be reduced by up to 14.5 % while it could decrease by up to 69.6 % in New Zealand. Additionally, reusing the spent LIB for other purposes would have the least environmental impacts on disposal among the options considered in the study. Therefore, New Zealand would benefit the most from BEV adoption by generating 100 % electricity from renewable sources, and developing policies and schemes to repurpose LIB at its end of life.

Computation of standard error for half-life estimation using various dissipation models for regulatory purposes.

Ecosystem including food chain may be modified over time because of the continued use of pesticides, piscicides including the use of veterinary antibiotics (VA) in agricultural, aquaculture and animal production. Regulatory authorities including government agencies have implemented various standard regulations across different parts of the world on the use of these products and monitoring the levels of these compounds in aquatic and soil environment has become an important aspect. Estimation of the half-life and reporting these values for regulatory authorities are paramount to safeguard human health and the environment. This was often determined based on the choice of best mathematical models, which is mainly dependent on the data quality. However, reporting the uncertainties associated with the estimation of standard errors is hitherto neglected. In this paper, we introduce a method how to compute the standard error of the half-life algebraically. Later, we provided some examples how to determine the standard error of the half-life numerically using previously published data and new data set, where appropriated mathematical models for the data have been also developed. The findings obtained in this study would allow one to gain information on the range of confidence interval for the half-life of compounds in soil or other media.

A green approach of biochar-supported magnetic nanocomposites from white tea waste: Production, characterization and plausible synthesis mechanisms.

Green synthesized magnetic nanoparticles were impregnated into biochar matrix (EWTWB) to produce biochar-supported magnetic nanocomposite (GSMB). Instead of chemicals, organic matters in white tea waste extract were used as reductant, surfactant and functional capping materials. Magnetic biochar produced from traditional methods of pyrolysis (PMB) and co-precipitation (Co-PreMB) were prepared to compare their properties with GSMB. Xray Diffraction confirmed the main component of green synthesized particles is Fe3O4. When compared with PMB and Co-PreMB, the Fe3O4 produced by co-precipitation method has higher purity while the products from green synthesis method are complex and contain a small portion of other iron-containing compounds. As a consequence, Co-PreMB has higher saturation magnetisation value than GSMB, which are 31.3 and 11.5 Am2/kg, respectively. GSMB was also found to be less stable in acidic conditions (pH ≤ 4) than Co-PreMB. However, the SEM results exhibited that spherical magnetic nanoparticles (20-50 nm) were successfully formed and distributed on the surface of biochar via green synthesis method while serious aggregation occurred on the surface of Co-PreMB. According to the result of BET, the surface area of GSMB increased dramatically from 0.2 m2/g to 59.7 m2/g. Fourier Transform Infrared spectroscopy and Xray photoelectron spectroscopy results showed the presence of rich oxygen-containing functional groups on the GSMB, The high surface area coupled with rich functional groups on the GSMB made the whole synthesis process an environmentally friendly and greener, to prepare magnetic biochar for application in wastewater treatment.

A novel green synthesized magnetic biochar from white tea residue for the removal of Pb(II) and Cd(II) from aqueous solution: Regeneration and sorption mechanism.

A novel biochar-based magnetic nanocomposite (GSMB) was prepared from white tea waste via green synthesis method. The sorption properties and regeneration of GSMB were studied using Pb(II) and Cd(II) to better understand its ability in heavy metal recovery. The adsorption kinetics data were modelled using pseudo-first order, pseudo-second order, Elovich and intraparticle diffusion models, while Pb(II) and Cd(II) isotherms were modelled with Langmuir, Freundlich, Temkin and Dubinin-Radushkevich models. Results showed that Pb(II) adsorption was well described by pseudo-second order while the Elovich model best described the Cd(II) adsorption trend, indicating the sorption of Pb(II) and Cd(II) onto GSMB were dominated by chemisoprtion rather than physisorption. Langmuir model gave the best fit to Pb(II) sorption, and the Cd(II) adsorption was well described by Temkin model. The maximum adsorption capacity of Pb(II) and Cd(II) onto GSMB were 81.6 mg/g and 38.6 mg/g, respectively. Scanning electron microscope coupled with energy dispersive x-ray, X-ray diffraction and Fourier transform infrared spectroscopy analyses revealed that iron oxides played a key role during adsorption process and the adsorption mechanisms include surface electrostatic attraction and surface complexation for both metals. Among the five regenerating agents studied, 0.1 M EDTA-2Na was favoured for the desorption of Pb(II) onto GMSB. The findings from the regeneration studies revealed ∼54% of Pb(II) adsorption capacity remained after three sorption-desorption cycles implying the adsorbent could potentially be further reused.

Reprocessed construction and demolition waste as an adsorbent: An appraisal.

Construction and Demolition (C&D) waste is solid wastes generated from the construction, demolition, and renovation activities that constitute almost 30-40 % of globally generated solid wastes. Improper disposal and management of these materials can cause negative impacts on the environment, economy, and human health. Most research on C&D waste is limited to reduction, recycling, and reuse of the wastes. However, there is no systematic review dedicated entirely to the applicability of C&D wastes as adsorbent for waste management. This review presents the utilization of C&D wastes-based adsorbents for removing contaminants from environmental matrices covering triple edge benefits in the viewpoints of waste treatment, solid waste management, and disposal. The properties, the capability of C&D waste adsorbents on contaminant removal, and the influence of various factors on the adsorptive removal is detailed. Further, the mechanisms involved in contaminant removal by C&D waste are summarized. The review revealed that, chemisorption is the prominent mechanism of contaminant removal by most C&D wastes. Among the three types of C&D waste reviewed; concrete-based adsorbents were the most efficient for contaminant removal. Limited studies are avaiable in the literature on binary and multiple contaminant systems, reusability studies, and high dependence on solution pH, therefore further studies are warrated. As C&D waste contain trace concentration of heavy metals and contaminants, its leaching potential at different pH levels and adsorbate concentration need to be conducted, which has been hitherto neglected. Finally, the approaches, obstacles, and potential solutions to build an industrially and economically efficient C&D adsorbent are discussed.