Changes in the arch width and buccal corridor after fixed orthodontic treatment with Damon self-ligating system: premolar extraction vs. non-extraction.

INTRODUCTION: Extraction vs. non-extraction is a crucial decision in orthodontic therapy. OBJECTIVE: The aim of the present study was to investigate the changes in the dental arch width and buccal corridor after orthodontic treatment using extraction and non-extraction therapy with Damon self-ligating system. MATERIAL AND METHODS: This retrospective study consisted of 35 patients (20 female and 15 male patients with median age of 12.5 years), treated by extracting 4 or 2 premolars, and 37 patients (16 female and 21 male patients with the median age of 12.8 years), treated without premolar extraction. Both groups were treated with Damon self-ligating system. Plaster models before (T0) and after (T1) treatment were measured, and the arch width values were determined at the level of the first molars, second premolars, canines and palatal rugae. Buccal corridor width was measured using the extraoral images at T0 and T1. Paired t-test was used for the analysis of the normally distributed data, and Wilcoxon Mann-Whitney U test was used for the data with non-normal distribution. Values of p<0.05 were set as statistically significant. RESULTS: The upper intercanine width increased significantly in both groups (p<0.01). In the non-extraction group, the arch width increased significantly in the maxillary second premolar and first molar region (p<0.01) as well as in the region of the canines (p=0.04), second premolars (p=0.01) and first molars (p<0.01) of the mandible. The buccal corridor decreased significantly in the non-extraction group (p<0.01). CONCLUSION: Premolar extraction in combination with Damon self-ligating system did not lead to reduction of the dental arch width in the maxilla, nor did it increase the size of the buccal corridors.

Evaluation of thickness of 3D printed versus thermoformed aligners: A prospective in vivo ageing experiment.

BACKGROUND: To compare and investigate the effects of intraoral ageing on the thickness of one group of directly printed and two groups of thermoformed aligners on the labial surface of maxillary central incisors. MATERIALS AND METHODS: Six groups (12 samples per group) were included in this prospective in vivo experiment. Groups DP-Clin, INV-Clin and CA-Clin consisted of directly printed (Tera Harz TC-85 DAC resin), thermoformed (Invisalign, PU based polymer) and in house thermoformed (CA-Pro, PET-G based polymer) aligners, retrieved after 1 week of intraoral service. Groups DP-Ctr, INV-Ctr and CA-Ctr included unused aligners samples. Thickness measurements were conducted using confocal laser scanning microscopy (CLSM). Data that underwent log-10 transformation was analysed by multiple linear regression analysis (p < .05). RESULTS: Statistically significant differences were found between the materials in both Clin and Ctr categories (p < .001). Group DP had the highest thickness among the groups and the least thickness was observed in the CA group (p < .001). However, intraoral ageing did not significantly affect the aligner thickness of any groups. CONCLUSIONS: Both thermoforming and direct printing of clear aligners led to thickness deviations in terms of increase for printed aligners and decrease for thermoformed aligners. Intraoral ageing did not affect the aligner thickness in any of the groups.

3D evaluation of sagittal inclination of the maxillary dentition in relation to facial landmarks: A cohort study.

BACKGROUND: The determination of the maxillary occlusal plane presents a significant clinical challenge in the treatment of edentulous patients as well as it is critical for complex full-mouth reconstructions in dentate patients, including those with implant-supported rehabilitations. While the use of a Fox plane plate is standard in edentulous cases, its application in dentate patients lacks thorough documentation in existing literature. PURPOSE: This clinical study assessed the sagittal position of the maxillary dentition in relation to facial landmarks using a digital three-dimensional analysis and evaluated the suitability and reliability of applying a simulated Fox plane plate, also known as an occlusal plane guide, in dentate patients. MATERIALS AND METHODS: Eighty-one subjects were recruited at the Department of Prosthetic Dentistry of Goethe University Frankfurt, Germany, according to specific inclusion criteria. Intraoral and facial scans were obtained and analyzed using GOM Inspect Pro software (GOM, Braunschweig, Germany). The angles between the maxillary occlusal plane and three variations each of Camper's plane and ala-tragus line, relating to superior, middle, and inferior tragus points, were measured. These modified planes were then compared to a plane established by a simulated digital Fox plane plate, which was adapted to the maxillary anterior teeth and the lowest point of the posterior teeth in both quadrants. RESULTS: A total of 81 subjects (58 female and 23 male) with a mean age of 23.9 years were evaluated in this study. No significant angular difference was found between the angles of the maxillary occlusal plane compared with superior Camper's plane, middle Camper's plane, or superior ala-tragus line (p >0.05). The smallest angle occurred between superior Camper's plane and the maxillary occlusal plane on both the right (3.443°) and left (3.535°) sides. The application of a Fox plane plate resulted in two different occlusal planes in 70% of patients, significantly deviating from the digitally determined plane (p <0.05). CONCLUSION: Superior and middle Camper's planes, along with superior ala-tragus line, can be considered approximately parallel reference planes and are suitable for routine determining of the maxillary occlusal plane in restorative treatments. However, in contrast to digital evaluation methods, the application of a Fox plane plate in dentate patients showed high variability, indicating its low reproducibility due to its ambiguous positioning on the maxillary dentition. Clinical trial registration site: https://drks.de/search/de/trial/DRKS00030166.

Observation of factors associated with visceral swallowing pattern in 2-6 year old children: A cross-sectional study.

Introduction: The association between the visceral swallowing pattern (VSP) and dentofacial abnormalities remains controversial. This cross-sectional study aimed to investigate the association between the VSP and various factors including type of birth, gender, tongue posture, lip incompetence, eruption of primary molars, habits and the presence of malocclusions in children with primary and early mixed dentition. Material and method: A total of 219 children (102 boys and 117 girls) were evaluated using a combination of a questionnaire and a structured clinical examination by one pediatric specialist dentist. Kittel's method of tongue posture evaluation and the Payne technique for assessment of swallowing pattern were included in the clinical examination of myofunctional status. After checking for normality, normal and non-normal distributed data were analyzed using two-sample t-test and Mann-Whitney U test, respectively. Analysis of categorical variables was done using a chi-square test, and Bonferroni correction was used as correction for multiple comparisons. Results: A total of 56.2 % of the study population had a VSP. The chi-square test indicated a statistically significant higher presence of VSP in male gender. Statistically significant associations were seen between the VSP and lip incompetency, pathologic resting tongue position, habits, anterior open bite and increased overjet. On the other hand, no statistically significant associations were found between VSP and children's age within the sample population, type of birth, uni- or bilateral crossbites, increased overbite, edge-to-edge anterior bite or completion of eruption of primary molars and/or permanent incisors. Conclusions: The association between VSP and male gender, pathologic tongue posture, lip incompetency and habits and occlusal traits such as anterior open bite and increased anterior overjet is supported by the results of the present study.

Influence of fixed orthodontic steel retainers on gingival health and recessions of mandibular anterior teeth in an intact periodontium - a randomized, clinical controlled trial.

OBJECTIVE: Aim of this randomized clinical controlled trial was to evaluate the influence of fixed orthodontic steel retainers on gingival health and recessions of mandibular anterior teeth. MATERIALS AND METHODS: After end of the orthodontic treatment, patients were randomly assigned into the test (fixed steel retainer) or control group (modified removable vacuum-formed retainer). Periodontal parameters (periodontal probing depth: PPD; recession: REC; bleeding on probing: BOP) as well as plaque and gingival index were assessed on mandibular anterior teeth directly before attaching/handing over the retainer (baseline: BL), 6 and 12 months after orthodontic treatment. RESULTS: 37 patients (test: n = 15, mean age: 16.1±4.2 years; control: n = 17, mean age: 17.1±5.4 years) completed the study. REC and PPD failed to show significant pairwise differences. The number of patients showing gingival health in the area of the mandibular anterior teeth (test: BL n = 10, 6 months n = 9, 12 months n = 11; control: BL n = 10, 6 months n = 16, 12 months n = 15) revealed a significant difference for the intra-group comparison between BL and 6 months in the control group (p = 0.043). The inter-group comparisons failed to show significant differences. CONCLUSION: Young orthodontically treated patients with fixed steel retainers show in 73.3% healthy gingival conditions after one year which are comparable to the control group (88.2%). Gingival recessions were in a clinically non-relevant range at any time of the examination. CLINICAL TRIAL NUMBER: DRKS00016710.

Three-dimensional evaluation of mandibular lingula: Comparisons of skeletal angle classifications and growth patterns.

OBJECTIVES: This study aimed to evaluate the position of the mandibular lingula (ML) in adult patients (aged between 18 and 35 years old) with different skeletal and growth patterns using cone-beam computed tomography (CBCT). DESIGN: Cross-sectional. SETTING: Dentistry department of University. SUBJECTS: Subjects comprised CBCT images of 150 adult patients, including 300 rami. METHODS AND MATERIALS: In total, 150 CBCT aged between 18 and 35 were selected and divided into three main groups of 50 samples based on their skeletal relationships (classes I, II and III). Patients were subdivided based on their growth pattern (vertical vs. horizontal), resulting in 25 samples per subgroup. Distances between the mandibular lingula and occlusal plane (ML-OP), sigmoid notch (ML-SN), external oblique ridge (ML-EOR), internal oblique ridge (ML-IOR), posterior border of the ramus (ML-PBR), inferior border of the ramus (ML-IBR), and horizontal and vertical distances to the mandibular foramen (ML-hMF and ML-vMF). One-way ANOVA variance analysis was employed to compare different angle classifications, and Bonferroni analysis was used for multiple comparisons. The Student's t-test was also used to compare growth patterns within each main group and genders within the subgroup. RESULTS: The study revealed statistically significant differences in the position of the mandibular lingula between different angle classifications, growth patterns, and genders. Class II samples showed a more anterior position of the ML, whereas Class III samples displayed a more posterior position of the ML. Patients with horizontal growth patterns and Angle Class III had a more posteriorly positioned ML. Gender differences were observed, particularly in Class I and Class III classifications, suggesting that gender may influence the variability of ML position in these specific classifications. CONCLUSION: The position of the mandibular lingula showed high variability among individuals with different angle classifications, growth patterns and genders.

Effects of intraoral aging on mechanical properties of directly printed aligners vs. thermoformed aligners: an in vivo prospective investigation.

OBJECTIVE: The objective of this study was to examine the impact of intraoral aging on the mechanical properties of directly printed aligners (DPA) compared to thermoformed aligners (TA). MATERIALS AND METHODS: This prospective in vivo experiment included three types of aligners: DPAs (group DP) fabricated from Tera Harz TC-85 DAC resin (Graphy, Korea), TA (group INV) made from a polyurethane-based polymer (Align Technology, Inc., CA, USA), and TA (group DUR) made from polyethylene glycol terephthalate based polymer (Scheu-Dental, Germany). Each group was categorized into retrieved (Clin) and unused aligners (Ctr). Thirty patients (10 per group) wore the aligners for 7 days, thereby generating the retrieved samples. Thirty unused aligners were employed as control samples. The following mechanical properties were determined: Martens Hardness (HM), indentation modulus (EIT), elastic index (ηIT), and indentation relaxation (RIT). Intergroup comparisons were conducted using ANOVA/Kruskal-Wallis test. Comparisons between retrieved and control samples were done using Wilcoxon-Mann-Whitney-U/Student's t-test/Welch's test. RESULTS: Statistically significant differences between the groups were found for both control and used samples (P < .001). Pairwise comparisons also revealed significant differences between the samples. The mechanical properties did not differ significantly between unused and retrieved INV- and DUR-aligners, whereas for DP-aligners significant differences for ηIT and RIT were found following intraoral service (P-values .012 and .002, respectively). CONCLUSIONS: Group DUR showed generally more favorable mechanical properties compared to DP and INV. The much higher RIT and EIT in DP aligners suggest their higher rigidity and force decay, which could compromise their clinical efficacy.

Alterations in the surface roughness and porosity parameters of directly printed and Invisalign aligners after 1 week of intraoral usage: An in vivo prospective investigation.

INTRODUCTION: Direct printing of clear aligners could be the next paradigm shift in modern orthodontics and can potentially overcome the limitation of the indirect production method. This study investigated the effects of 1 week of intraoral usage on the surface roughness parameters of directly printed aligners (DPAs) and commercially produced Invisalign aligners compared with their unused control counterparts using confocal laser scanning microscopy. METHODS: The study consisted of 4 groups with 34 samples per group. Unused control aligners were allocated to the control groups (DP-Ctr and INV-Ctr). Sixty-eight patients undergoing clear aligner therapy were allocated to group DP-Clin (patients in therapy using DPAs made from TC-85 DAC resin) and group INV-Clin (patients provided with Invisalign aligners). After 1 week of intraoral usage, the aligners were retrieved from the patients in groups DP-Clin and INV-Clin. Samples were made from the buccal surface of the maxillary right central incisor of each aligner and underwent surface roughness and porosity measuring using confocal laser scanning microscopy. The arithmetic mean deviation of the profile, root mean square deviation, maximum peak height, maximum valley depth, maximum height difference among the highest peak and deepest valley, void volume, and void count were measured. Descriptive analysis and median (quantile) regression models were used for data analysis of this experiment. RESULTS: One week of intraoral usage significantly increased the surface roughness and porosity of DPAs. In contrast, a significant reduction in the surface roughness and porosity parameters of Invisalign aligners was recorded after intraoral service. CONCLUSIONS: This study suggests an increase in the surface roughness and surface porosity of DPAs following 1 week of intraoral usage, which might lead to an increase in bacterial adhesion and biofilm formation in these aligners.

Impact of two different patient decision aids in prosthodontic consultations: a prospective randomized controlled study.

OBJECTIVES: Different approaches to prosthodontic consultation, all involving a strong focus on shared decision-making, were analyzed from the perspective of patients by inter-group comparisons. No patient decision aid (PDA) was used in the control group, a paper-based PDA in test group 1, and a software-based PDA in test group 2. MATERIALS AND METHODS: Seventy-five patients were prospectively randomized to the control group or a test group. All patients then rated the consultation on a questionnaire, six key items of which were analyzed, along with the time spent on each consultation. RESULTS: Overall satisfaction was highest in test group 2, with a significant difference from the control group (p = 0.015). Test group 2 showed the most favorable ratings for all six questionnaire items, which invariably was significant compared to the control group (p = 0.032). Test group 1 significantly differed from test group 2 based on two items (consultation was adequately intelligible: p = 0.011; consultation was adequately comprehensive: p = 0.034) but not from the control group based on any item (p = 0.070). CONCLUSIONS: Within the limitations of this study, the use of a software-based PDA, in particular, can be recommended based on patient satisfaction and was associated with the shortest sessions for consultation. CLINICAL RELEVANCE: Patients are routinely faced with a wealth of information in dental offices and may be overwhelmed especially by prosthetic treatment options and decision requirements. Our findings shed some light on the nature of aids that may truly be helpful in the process of shared decision-making. TRIAL REGISTRATION: ClinicalTrials.gov.Identifier: ISRCTN11472465.

[ZApprO versus ZÄPrO: results of a first comparative study]. / ZApprO versus ZÄPrO: Ergebnisse einer ersten Vergleichsstudie.

BACKGROUND: More than 60 years after the enactment of the first Licensing Regulations for Dentists (ZÄPrO), a new Licensing Regulations for Dentists, the ZApprO, was implemented in 2020. The aims of this study were to evaluate and compare the "Course in Technical Propaedeutics" (TPK) with the course "Dental Propaedeutics with a Focus on Dental Technology" (ZPDT), which are based on different legal foundations. METHODS: The following parameters were compared after completion of the courses: (1) theoretical and practical knowledge, (2) regular department-internal learner evaluation, and (3) special evaluation of learning conditions by the learners and (4) by the instructors. The theoretical and practical exams and the questionnaires were analyzed in terms of their test-statistical characteristics (difficulty, discrimination index, internal consistency). Group comparisons between TPK and ZPDT were conducted using t­tests for independent groups. RESULTS: Significant differences were only detected in the students' evaluation of their learning conditions, with theoretical and practical knowledge transfer being rated lower in the TPK than in the ZPDT. DISCUSSION: The comparable results of the knowledge assessments and the regular learner evaluation, triangulated with the comprehensive learner and instructor evaluation, allowed a broad assessment of both courses. The significant differences identified provide opportunities for optimization of the newly implemented ZPDT course.

Posttreatment stability following therapy using passive self-ligating brackets: extraction vs. nonextraction.

PURPOSE: This study aimed to evaluate the effects of lower premolar extraction on posttreatment stability one year following fixed orthodontic treatment with passive self-ligating brackets (Damon system, Ormco, Orange, CA, USA). METHODS: All patients were treated with fixed orthodontic appliances using passive self-ligating brackets (Damon). For retention, removable Hawley retainers were used. Two groups of patients were included in the study. Each group consisted of 23 patients: group Ex consisted of 10 male and 13 female patients (13.4 ± 1.6 years old) with extraction of lower first premolars and group NonEx consisted of 11 male and 12 female patients (13.4 ± 3.9 years old) without dental extractions. The patients' dental models and photographs were assessed at T0 (pretreatment), T1 (the end of active orthodontic treatment: 3.3 ± 1.0 years in the Ex and 2.3 ± 0.8 years in the NonEx group) and at T2 (1 year posttreatment). All lower casts were scanned and the following dental parameters were recorded and compared between the two groups: intercanine width (ICW), anterior arch width (AAW), intermolar width (IMW), Little's irregularity index (LII) and gingival recessions. RESULTS: An increase in ICW (group Ex: 1.20 ± 2.51 mm and group NonEx: 0.84 ± 1.48 mm) by the end of active treatment (T1; P < 0.05), as well as a relapse regarding the ICW (group Ex: -0.1 ± 0.47 mm and group NonEx: -67% ± 0.38 mm) one year post-treatment (T2) were recorded in the samples. Relapse in the non-extraction group was statistically and clinically significant, whereas ICW values remained relatively stable in the extraction group during the posttreatment period (T1-T2). The irregularity index decreased during treatment (group Ex: -8.79 ± 6.36 mm and group NonEx: -5.24 ± 2.99 mm) and relapsed in both groups (group Ex: 0.57 ± 90 mm and group NonEx: 0.27 ± 0.53). The rate of relapse in LII was correlated to the relapse rate of ICW. A reduction of IMW was recorded in the Ex group (-1.89 ± 1.82 mm) during active treatment (P < 0.05), which remained stable 1 year posttreatment. AAW increased in both groups (group Ex: 2.77 ± 1.77 mm and group NonEx: 1.77 ± 2.04 mm) throughout active treatment and remained stable at T2. CONCLUSION: Intergroup comparison revealed that ICW remained stable 1 year posttreatment in the Ex group, whereas high relapse of ICW was recorded in the NonEx group. Furthermore, risk of a relapse of LII appears to be higher in cases with a relapse of the ICW.

Reliability of qualitative and quantitative assessment of adhesive remnants after debonding of ceramic brackets bonded with Transbond™XT on human molar teeth: An in vitro study.

OBJECTIVE: To test the hypothesis that there are any differences between qualitative and quantitative methods of adhesive remnants index (ARI) scores on the buccal surfaces of the upper molar. MATERIALS AND METHODS: The study included 34 upper first human molars. After etching for 20seconds by using 35% orthophosphoric acid (Ultra-Etch, Ultradent Products Inc., USA) and then rinsed with distilled water for 15seconds, the adhesive (Transbond™XT, 3M™, USA) was applied and cured with the polymerization lamp (Bluephase Style, Ivoclar Vivadent, Liechtenstein) for 10seconds. Ceramic brackets (Damon® Clear™, Ormco, USA) were placed by composite (Transbond™XT, 3M™, USA) on the buccal surface of the molars. Following 24-hour storage of the samples in distilled water (WB-12, Phoenix Instrument, Gabsen, Germany) at 37°C, the brackets were debonded using a debonding plier (Damon Clear Debonding Plier, Ormco, USA). ARI and a modified ARI-scoring system were used. Three independent observers scored the ARI with the naked eye under 10x, 20x, and 32x magnifications using Stereomicroscope Stemi DV4 (Zeiss, Germany). Afterward, the digital microscope VHX-5000 (Keyence, Japan) under 50x magnification was used for the quantitative analysis of the adhesive remnants by just one evaluator. The Fleiss' Kappa-coefficient test was used to assess interrupter reliability. RESULTS: Fleiss' Kappa-coefficient test show that the highest amount of agreement between observers is observed using the naked eye for both of the scoring methods P<0.001. Increasing the magnification led to the moderate decrease of inter-observer agreement. For evaluations with naked eye, a higher agreement is observed for the modified ARI score compared to the ARI scored. The agreement between the quantitative and qualitative evaluation of the ARI score rose with increasing magnification. CONCLUSION: The assessment of adhesive remnants should be done either with naked eye or under 10x magnification, as they showed the highest rate of intra-observer agreement.