RESUMEN
Polytetrafluoroethylene (PTFE) exhibits outstanding properties such as high-temperature stability, low surface tension, and chemical resistance against most solvents, strong acids, and bases. However, these traits make it challenging to subject PTFE to standard polymer processing procedures, such as thermoforming and hot incremental forming. While polymer processing at temperatures above the melting point of PTFE is already demanding, the typically large molar mass of PTFE results in extremely high melt viscosities, complicating the processing of PTFE. Also, PTFE tends to decompose at temperatures close to its melting point. Therefore, fluoropolymers obtained by copolymerizing tetrafluoroethylene (TFE) with various co-monomers are studied as alternatives to PTFE (e.g., fluorinated ethylene-propylene (FEP)), combining its advantages with better processability. TFE terpolymers have emerged as desirable PTFE alternatives. This review provides an overview of the synthesis with various comonomers and microstructural analysis of PTFE terpolymers and the relationships between the microstructures of TFE terpolymers and their properties.
RESUMEN
Many sources of pollution that are generated by modern society are not addressable by conventional methods. Especially organic compounds, like pharmaceutics, are particularly hard to remove from waterbodies. Herein, a new approach is presented using conjugated microporous polymers (CMPs) to coat silica microparticles yielding specifically tailored adsorbents. The CMPs are generated with three different monomers: 2,6-dibromonaphthalene (DBN), 2,5-dibromoaniline (DBA) and 2,5-dibromopyridine (DBPN) respectively coupled to 1,3,5-triethynylbenzene (TEB) via Sonogashira coupling. By optimizing the polarity of the silica surface, all three CMPs were converted into microparticle coatings. The resulting hybrid materials feature the advantages of being adjustable in polarity and functionality, as well as morphology. Sedimentation allows facile removal of the coated microparticles after the adsorption. Further, the expansion of the CMP to a thin coating increases the accessible surface area compared to the bulk material. These effects were demonstrated by the adsorption of the model drug diclofenac. Thereby, the aniline-based CMP proved to be most advantageous due to a secondary crosslinking mechanism of amino and alkyne functionalities. An outstanding adsorption capacity of 228 mg diclofenac per gram of the aniline CMP within the hybrid material was achieved. This represents a five-fold increase compared to the value obtained by the pure CMP material underlining the advantages of the hybrid material.
RESUMEN
Cryogenic-probe-based Rheo-NMR spectroscopy is a recently developed methodology to obtain solution NMR spectra of protein samples in situ under external shear. It is applicable to atomic-resolution monitoring of protein aggregation in situ, thereby aiding understanding of the transient structural changes and state conversion of amyloidogenic proteins, which are strongly associated with the both the onset and the progression of neurodegenerative diseases such as Alzheimer's disease and Parkinson's disease. Here, we present detailed experimental procedures for the instrumental setup and practical tips for preparation of NMR measurement to analyze protein aggregation by this technique. This protocol will thus aid future Rheo-NMR spectroscopic studies not only of protein aggregation but also of other phenomena related to shear stress, such as shear-induced viscosity increase and shear-enhanced crystallization. © 2022 Wiley Periodicals LLC. Basic Protocol 1: Setup of a Rheo-NMR Instrument Basic Protocol 2: Adjustment of the Vertical and Horizontal Positions of the Glass Stick Basic Protocol 3: Monitoring Protein Aggregation by Rheo-NMR Spectroscopy.
Asunto(s)
Imagen por Resonancia Magnética , Agregado de Proteínas , Espectroscopía de Resonancia Magnética/métodos , Viscosidad , Proteínas AmiloidogénicasRESUMEN
The anode-free battery concept is proposed to pursue the aspiration of energy-dense, rechargeable metal batteries, but this has not been achieved with dual-ion batteries. Herein, the first anode-free Zn-graphite battery enabled by efficient Zn plating-stripping onto a silver-coated Cu substrate is demonstrated. The silver coating guides uniform Zn deposition without dendrite formation or side reaction over a wide range of electrolyte concentrations, enabling the construction of anode-free Zn cells. In addition, the graphite cathode operates efficiently under reversible bis(trifluoromethanesulfonyl)imide anion (TFSI- ) intercalation without anodic corrosion. An extra high-potential TFSI- intercalation plateau is recognized at 2.75 V, contributing to the high capacity of graphite cathode. Thanks to efficient Zn plating-stripping and TFSI- intercalation-deintercalation, an anode-free Zn-graphite dual-ion battery that exhibits impressive cycling stability with 82% capacity retention after 1000 cycles is constructed. At the same time, a specific energy of 79 Wh kg-1 based on the mass of cathode and electrolyte is achieved, which is over two times higher than conventional Zn-graphite batteries (<30 Wh kg-1 ).
RESUMEN
Rechargeable aluminium (Al) batteries (RABs) have long-been pursued due to the high sustainability and three-electron-transfer properties of Al metal. However, limited redox chemistry is available for rechargeable Al batteries, which restricts the exploration of cathode materials. Herein, we demonstrate an efficient Al-amine battery based on a quaternization reaction, in which nitrogen (radical) cations (R3 N.+ or R4 N+ ) are formed to store the anionic Al complex. The reactive aromatic amine molecules further oligomerize during cycling, inhibiting amine dissolution into the electrolyte. Consequently, the constructed Al-amine battery exhibits a high reversible capacity of 135â mAh g-1 along with a superior cycling life (4000â cycles), fast charge capability and a high energy efficiency of 94.2 %. Moreover, the Al-amine battery shows excellent stability against self-discharge, far beyond conventional Al-graphite batteries. Our findings pave an avenue to advance the chemistry of RABs and thus battery performance.
RESUMEN
Despite the vast array of solution- and solid-state bio-analytical, bioelectronic and optoelectronic applications of cationic polythiophenes (CPTs), the number of studies focused on the role of hydrogen bonding (H-bonding) between these and other molecules is scarce, regardless of whether H-bonding is expected to play an important role in several such applications. Also, despite the advantages of using cosolvents to systematically examine the molecular interactions, there are no such studies for CPTs to our knowledge. This work presents a steady-state UV-vis/fluorescence spectroscopic, kinetic and thermodynamic study on the H-bonding interactions between a water-soluble, cationic-anionic (isothiouronium-tetraphosphonate), polythiophene-fullerene donor-acceptor pair with two-point, charge-assisted H-bonding (CAHB) capabilities, tuned using water or a 1,4-dioxane-water mixture (W-DI). Both solvents generate photoinduced electron transfer (PET), fluorescence resonance energy transfer (FRET), spontaneous binding, H-bonding, ground-state complexing via multiple site binding, formation of micelle-like aggregates and equivalence points at a similar concentration of the quencher. However, in comparison with water, W-DI promotes less-ordered, less packed micellar aggregates, due to hydrophobic desolvation of the H-bond and larger solvent displacement during the PT1-4Fo complexation. This would decrease the extent of charge-transfer and the size of the sphere-of-quenching, mainly by displacements or rotations of the H-bonds, instead of elongations, together with a possible larger extent of diffusion-controlled static quenching. At [4Fo] larger than the equivalence point the micelles formed in water do not have available binding sites due to a tighter aggregation, causing a decrease in the quenching efficiency, while the micelles formed in W-DI start showing larger quenching efficiencies, possibly due to an increase in entropy that overcomes the desolvation of the H-bonding. These results could be useful when analyzing outputs from systems including CPTs with H-bonding capabilities, operating in (or casted from) solvents with clear differences in polarity and/or H-bonding capacity.
RESUMEN
Adenosine triphosphate (ATP) is an immensely well-studied metabolite serving multiple key biochemical roles as the major chemical energy currency in living systems, a building block of ribonucleic acids, and a phosphoryl group donor in kinase-mediated signaling. Intriguingly, ATP has been recently proposed to act as a hydrotrope that inhibits aggregation of amyloidogenic proteins; however, the underlying mechanism and the general physicochemical effect that coexistence with ATP exerts on proteins remain unclear. By combining NMR spectroscopy and MD simulations, here we observed weak but unambiguously measurable and concentration-dependent noncovalent interactions between ATP and various proteins. The interactions were most pronounced for an intrinsically disordered protein (α-synuclein) and for residues in flexible regions (e.g., loops or termini) of two representative folded proteins (ubiquitin and the dimeric ubiquitin-binding domain of p62). As shown by solution NMR, a consequence of the ATP-protein interaction was altered hydration of solvent-exposed residues in the protein. The observation that ATP interacted with all three proteins suggests that ATP is a general nonspecific binder of proteins. Several complementary biophysical methods further confirmed that, at physiological concentrations of â¼5-10 mM, ATP starts to form oligomeric states via magnesium-chelating and chelation-independent mechanisms, in agreement with previous studies. Although the observed ATP-protein interaction was relatively weak overall, the high ratio of ATP (monomeric free ATP, mono- and divalent ion-bound ATP, oligomeric and chelated ATP) to proteins in cells suggests that most proteins are likely to encounter transient interactions with ATP (and chemically similar metabolites) that confer metabolite-mediated protein surface protection.
Asunto(s)
Adenosina Trifosfato/química , Proteína Sequestosoma-1/química , Ubiquitina/química , alfa-Sinucleína/química , Sitios de Unión , Espectroscopía de Resonancia Magnética , Simulación de Dinámica MolecularRESUMEN
The strong polycation poly(diallyldimethylammonium chloride) (PDADMAC) and the weak polyanion poly(ethylene-alt-maleic acid) (P(E-alt-MA)) were used to build polyelectrolyte multilayers (PEMs) up to 31 layers. A spin-label (SL) was covalently attached to the polyanion for studying the rotational dynamics of the polyacid backbone in a swollen state of the PEMs using continuous-wave (CW) electron paramagnetic resonance (EPR) spectroscopy. In the first step, the spin-labeled poly(ethylene-alt-maleic acid) (SL-P(E-alt-MA)) was used in every polyanion layer to monitor the PEMs growth by analyzing the integrated intensity of the spectra. The buildup was found to be pH-dependent resulting in PEM with different thicknesses. In the second step, SL-P(E-alt-MA) was selectively placed in a single polyanion layer to study the rotational dynamics of the polyacid backbone. The rotational diffusion coefficient of the polyacid backbone RS and the internal rotational diffusion coefficient of the SL attached to the polymer backbone RI were found to be higher at pH 5 than at pH 4, which is related to enhanced mobility.
RESUMEN
In recent years, chitosan has attracted considerable interest in many fields due to its sufficient charge density under biological, non-hazardous conditions. Since chitosan originates from natural resources and has two different monomer units, its characterization must be carried out in a goal-oriented and precise manner. This work focuses on the characterization of chitosans most important parameters - solubility, crystallinity, degree of deacetylation (DD) and molecular weight - in a simple and convenient way. The DD was determined using Nuclear Magnetic Resonance spectroscopy (NMR), Particle Charge Detection (PCD), Fourier Transform Infrared spectroscopy (FTIR), CHN elemental analysis (CHN-EA) and conductometric/potentiometric titration with special attention to its physical state as solid or liquid. Investigation of DD by FTIR was successfully determined by calculating peak heights, peak areas and peak deconvolution from a linear combination of Gaussian and Lorentzian functions. Asymmetrical flow field flow fractionation with light scattering detection (AF4-LS) was applied in order to calculate molar masses and radii. In addition, pH-potentiometric titrations demonstrated a reproducible displacement of the point of zero charge (PZC) in form of a hysteresis depending on the titration direction. The DD affects the crystallinity, which was determined by deconvolution of the crystalline and amorphous domains.
Asunto(s)
Quitosano/química , Acetilación , Cristalización , Fraccionamiento de Campo-Flujo/métodos , Resonancia Magnética Nuclear Biomolecular , Potenciometría , Reproducibilidad de los Resultados , Solubilidad , Espectroscopía Infrarroja por Transformada de Fourier , Termogravimetría , Viscosidad , Difracción de Rayos XRESUMEN
The intrinsic advantages of metallic Zn, like high theoretical capacity (820 mAh g-1 ), high abundance, low toxicity, and high safety have driven the recent booming development of rechargeable Zn batteries. However, the lack of high-voltage electrolyte and cathode materials restricts the cell voltage mostly to below 2 V. Moreover, dendrite formation and the poor rechargeability of the Zn anode hinder the long-term operation of Zn batteries. Here a high-voltage and durable Zn-graphite battery, which is enabled by a LiPF6 -containing hybrid electrolyte, is reported. The presence of LiPF6 efficiently suppresses the anodic oxidation of Zn electrolyte and leads to a super-wide electrochemical stability window of 4 V (vs Zn/Zn2+ ). Both dendrite-free Zn plating/stripping and reversible dual-anion intercalation into the graphite cathode are realized in the hybrid electrolyte. The resultant Zn-graphite battery performs stably at a high voltage of 2.8 V with a record midpoint discharge voltage of 2.2 V. After 2000 cycles at a high charge-discharge rate, high capacity retention of 97.5% is achieved with ≈100% Coulombic efficiency.
RESUMEN
In living cells, biomacromolecules are exposed to a highly crowded environment. The cytoplasm, the nucleus, and other organelles are highly viscous fluids that differ from dilute in vitro conditions. Viscosity, a measure of fluid internal friction, directly affects the forces that act on immersed macromolecules. Although active motion of this viscous fluid - cytoplasmic streaming - occurs in many plant and animal cells, the effect of fluid motion (flow) on biomolecules is rarely discussed. Recently NMR experiments that apply a shearing flow in situ have been used for protein studies. While these NMR experiments have succeeded in spectroscopically tracking protein aggregation in real time, they do not provide a visual picture of protein motion under shear. To fill this gap, here we have used molecular dynamics simulations to study the motion of three proteins of different size and shape in a simple shearing flow. The proteins exhibit a superposition of random diffusion and shear-flow-induced rotational motion. Random rotational diffusion dominates at lower shear stresses, whereas an active "rolling motion" along the axis of the applied flow occurs at higher shear stress. Even larger shear stresses perturb protein secondary structure elements resulting in local and global unfolding. Apart from shear-induced unfolding, our results imply that, in an ideal Couette flow field biomolecules undergo correlated motion, which should enhance the probability of inter-molecular interaction and aggregation. Connecting biomolecular simulation with experiments applying shear flow in situ appears to be a promising strategy to study protein alignment, deformation, and dynamics under shear.
Asunto(s)
Espectroscopía de Resonancia Magnética , Simulación de Dinámica Molecular , Proteínas/química , Núcleo Celular/química , Citoplasma/química , Difusión , Humanos , Hidrodinámica , Movimiento (Física) , Probabilidad , Desnaturalización Proteica , Mapeo de Interacción de Proteínas , Resistencia al Corte , Estrés Mecánico , Superóxido Dismutasa-1/química , ViscosidadRESUMEN
A sol-gel transformation of liquid silica precursor to solid silica particles was carried out in a one-pot synthesis way, where a solution of styrene butadiene elastomer was present. The composites, thus produced, offered remarkable improvements of mechanical and dynamic mechanical performances compared to precipitated silica. The morphological analysis reveals that the alkoxy-based silica particles resemble a raspberry structure when the synthesis of the silica was carried out in the presence of polymer molecules and represent a much more open silica-network structure. However, in the absence of the polymer, the morphology of the silica particles is found to be different. It is envisaged that the special morphology of the in situ synthesized silica particles contributes to the superior reinforcement effects, which are associated with a strong silica-rubber interaction by rubber chains trapped inside the raspberry-like silica aggregates. Therefore, the interfaces are characterized in detail by low-field solid-state 1H NMR spectroscopy, 29Si solid-state NMR spectroscopy, and energy-dispersive X-ray spectroscopy. Low-field 1H NMR-based double-quantum experiments provide a quantitative information about the cross-link density of the silica-filled rubber composites and about the influence of silane coupling agent on the chemical cross-link density of the network and correlates well with equilibrium swelling measurements. The special microstructure of the alkoxy-based silica was found to be associated with the interaction between alkoxy-based silica and rubber chains as a consequence of particle growth in the presence of rubber chains.
RESUMEN
The local dynamics in polymer melts and the impact of external shear in a Couette geometry have been investigated using rheological nuclear magnetic resonance (NMR). The spin-spin relaxation time, T2, which is sensitive to chain-segment motion, has been measured as a function of shear rate for two samples of poly(dimethylsiloxane). For the low-molecular-weight sample, a mono-exponential decay is observed, which becomes slightly faster with shear, indicating restrictions of the polymer chain motion. For the high-weight sample, a much faster bi-exponential decay is observed, indicative of entanglements. Both components in this decay become longer with shear. This implies that the free polymer segments between entanglements become effectively longer as a result of shear.
RESUMEN
Rubber composites were prepared by mixing bromobutyl rubber (BIIR) with silica particles in the presence of 1-butylimidazole. In addition to pristine (precipitated) silica, silanized particles with aliphatic or imidazolium functional groups, respectively, were used as filler. The silanization was carried out either separately or in situ during compounding. The silanized particles were characterized by TGA, 1H-29Si cross polarization (CP)/MAS NMR, and Zeta potential measurements. During compounding, the bromine groups of BIIR were converted with 1-butylimidazole to ionic imidazolium groups which formed a dynamic network by ionic association. Based on DMA temperature and strain sweep measurements as well as cyclic tensile tests and stress-strain measurements it could be concluded that interactions between the ionic groups and interactions with the functional groups of the silica particles strongly influence the mechanical and viscoelastic behavior of the composites. A particularly pronounced reinforcing effect was observed for the composite with pristine silica, which was attributed to acid-base interactions between the silanol and imidazolium groups. In composites with alkyl or imidazolium functionalized silica particles, the interactions between the filler and the rubber matrix form dynamic networks with pronounced self-healing behavior and excellent tensile strength values of up to 19 MPa. This new approach in utilizing filler-matrix interactions in the formation of dynamic networks opens up new avenues in designing new kinds of particle-reinforced self-healing elastomeric materials with high technological relevance.
RESUMEN
In this work, we show that it is possible to overcome the limitations of solid-state MRI for rigid tissues due to large line broadening and short dephasing times by combining Magic Angle Spinning (MAS) with rotating pulsed field gradients. This allows recording ex vivo 31P 3D and 2D slice-selected images of rigid tissues and related biomaterials at very high magnetic field, with greatly improved signal to noise ratio and spatial resolution when compared to static conditions. Cross-polarization is employed to enhance contrast and to further depict spatially localized chemical variations in reduced experimental time. In these materials, very high magnetic field and moderate MAS spinning rate directly provide high spectral resolution and enable the use of frequency selective excitation schemes for chemically selective imaging. These new possibilities are exemplified with experiments probing selectively the 3D spatial distribution of apatitic hydroxyl protons inside a mouse tooth with attached jaw bone with a nominal isotropic resolution nearing 100 µm.
Asunto(s)
Campos Magnéticos , Imagen por Resonancia Magnética/métodos , Isótopos de Fósforo , Protones , Materiales Biocompatibles , Imagenología Tridimensional , Espectroscopía de Resonancia Magnética/métodos , Especificidad de Órganos , Fantasmas de ImagenRESUMEN
Shear stress can induce structural deformation of proteins, which might result in aggregate formation. Rheo-NMR spectroscopy has the potential to monitor structural changes in proteins under shear stress at the atomic level; however, existing Rheo-NMR methodologies have insufficient sensitivity to probe protein structure and dynamics. Here we present a simple and versatile approach to Rheo-NMR, which maximizes sensitivity by using a spectrometer equipped with a cryogenic probe. As a result, the sensitivity of the instrument ranks highest among the Rheo-NMR spectrometers reported so far. We demonstrate that the newly developed Rheo-NMR instrument can acquire high-quality relaxation data for a protein under shear stress and can trace structural changes in a protein during fibril formation in real time. The described approach will facilitate rheological studies on protein structural deformation, thereby aiding a physical understanding of shear-induced amyloid fibril formation.
Asunto(s)
Ubiquitina/análisis , Humanos , Espectroscopía de Resonancia Magnética , ReologíaRESUMEN
One consequence of demographic change is the increasing demand for biocompatible materials for use in implants and prostheses. This is accompanied by a growing number of experimental animals because the interactions between new biomaterials and its host tissue have to be investigated. To evaluate novel materials and engineered tissues the use of non-destructive imaging modalities have been identified as a strategic priority. This provides the opportunity for studying interactions repeatedly with individual animals, along with the advantages of reduced biological variability and decreased number of laboratory animals. However, histological techniques are still the golden standard in preclinical biomaterial research. The present article demonstrates a detailed method comparison between histology and magnetic resonance imaging. This includes the presentation of their image qualities as well as the detailed statistical analysis for assessing agreement between quantitative measures. Exemplarily, the bony ingrowth of tissue engineered bone substitutes for treatment of a cleft-like maxillary bone defect has been evaluated. By using a graphical concordance analysis the mean difference between MRI results and histomorphometrical measures has been examined. The analysis revealed a slightly but significant bias in the case of the bone volume [Formula: see text] and a clearly significant deviation for the remaining defect width [Formula: see text] But the study although showed a considerable effect of the analyzed section position to the quantitative result. It could be proven, that the bias of the data sets was less originated due to the imaging modalities, but mainly on the evaluation of different slice positions. The article demonstrated that method comparisons not always need the use of an independent animal study, additionally.
Asunto(s)
Imagen por Resonancia Magnética/métodos , Animales , Materiales Biocompatibles , Sustitutos de Huesos , Bovinos , Imagen por Resonancia Magnética/normas , Masculino , Ratas , Ratas Endogámicas Lew , Ingeniería de TejidosRESUMEN
The mesocrystal system fluoroapatite-gelatine grown by double-diffusion is characterized by hierarchical composite structure on a mesoscale. In the present work we apply solid state NMR to characterize its structure on the molecular level and provide a link between the structural organisation on the mesoscale and atomistic computer simulations. Thus, we find that the individual nanocrystals are composed of crystalline fluorapatite domains covered by a thin boundary apatite-like layer. The latter is in contact with an amorphous layer, which fills the interparticle space. The amorphous layer is comprised of the organic matrix impregnated by isolated phosphate groups, Ca3F motifs and water molecules. Our NMR data provide clear evidence for the existence of precursor complexes in the gelatine phase, which were not involved in the formation of apatite crystals, proving hence theoretical predictions on the structural pre-treatment of gelatine by ion impregnation. The interfacial interactions, which may be described as the glue holding the composite materials together, comprise hydrogen bond interactions with the apatite PO4(3-) groups. The reported results are in a good agreement with molecular dynamics simulations, which address the mechanisms of a growth control by collagen fibers, and with experimental observations of an amorphous cover layer in biominerals.
Asunto(s)
Apatitas/química , Materiales Biomiméticos/química , Gelatina/química , Espectroscopía de Resonancia Magnética , Cristalización , Enlace de Hidrógeno , Microscopía Electrónica de Rastreo , Nanocompuestos/químicaRESUMEN
The influence of maltose-modified poly(propylene imine) (PPI) dendrimers on dimyristoylphosphatidylcholine (DMPC) or dimyristoylphosphatidylcholine/dimyristoylphosphatidylglycerol (DMPC/DMPG) (3%) liposomes was studied. Fourth generation (G4) PPI dendrimers with primary amino surface groups were partially (open shell glycodendrimers - OS) or completely (dense shell glycodendrimers - DS) modified with maltose residues. As a model membrane, two types of 100nm diameter liposomes were used to observe differences in the interactions between neutral DMPC and negatively charged DMPC/DMPG bilayers. Interactions were studied using fluorescence spectroscopy to evaluate the membrane fluidity of both the hydrophobic and hydrophilic parts of the lipid bilayer and using differential scanning calorimetry to investigate thermodynamic parameter changes. Pulsed-filed gradient NMR experiments were carried out to evaluate common diffusion coefficient of DMPG and DS PPI in D2O when using below critical micelle concentration of DMPG. Both OS and DS PPI G4 dendrimers show interactions with liposomes. Neutral DS dendrimers exhibit stronger changes in membrane fluidity compared to OS dendrimers. The bilayer structure seems more rigid in the case of anionic DMPC/DMPG liposomes in comparison to pure and neutral DMPC liposomes. Generally, interactions of dendrimers with anionic DMPC/DMPG and neutral DMPC liposomes were at the same level. Higher concentrations of positively charged OS dendrimers induced the aggregation process with negatively charged liposomes. For all types of experiments, the presence of NaCl decreased the strength of the interactions between glycodendrimers and liposomes. Based on NMR diffusion experiments we suggest that apart from electrostatic interactions for OS PPI hydrogen bonds play a major role in maltose-modified PPI dendrimer interactions with anionic and neutral model membranes where a contact surface is needed for undergoing multiple H-bond interactions between maltose shell of glycodendrimers and surface membrane of liposome.
Asunto(s)
Dendrímeros/química , Membrana Dobles de Lípidos/química , Maltosa/química , Lípidos de la Membrana/química , Polipropilenos/química , Rastreo Diferencial de Calorimetría , Dendrímeros/metabolismo , Dimiristoilfosfatidilcolina/química , Dimiristoilfosfatidilcolina/metabolismo , Difenilhexatrieno/química , Polarización de Fluorescencia , Enlace de Hidrógeno , Interacciones Hidrofóbicas e Hidrofílicas , Membrana Dobles de Lípidos/metabolismo , Liposomas/química , Liposomas/metabolismo , Espectroscopía de Resonancia Magnética , Maltosa/metabolismo , Fluidez de la Membrana , Lípidos de la Membrana/metabolismo , Fosfatidilgliceroles/química , Fosfatidilgliceroles/metabolismo , Polipropilenos/metabolismo , Electricidad EstáticaRESUMEN
The model system fluorapatite-gelatin allows mimicking the formation conditions on a lower level of complexity compared to natural dental and bone tissues. Here, we report on solid-state NMR investigations to examine the structure of fluorapatite-gelatin nanocomposites on a molecular level with particular focus on organic-inorganic interactions. Using (31)P, (19)F, and (1)H MAS NMR and heteronuclear correlations, we found the nanocomposite to consist of crystalline apatite-like regions (fluorapatite and hydroxyfluorapatite) in close contact with a more dissolved (amorphous) layer containing first motifs of the apatite crystal structure as well as the organic component. A scheme of the intergrowth region in the fluorapatite-gelatin nanocomposite, where mineral domains interact with organic matrix, is presented.