High-speed RF spectral analysis using a Rayleigh backscattering speckle spectrometer.

Persistent wideband radio frequency (RF) surveillance and spectral analysis is increasingly important, driven by the proliferation of wireless communication and RADAR technology. However, conventional electronic approaches are limited by the ∼1 GHz bandwidth of real-time analog-to-digital converters (ADCs). While faster ADCs exist, high data rates prohibit continuous operation, limiting these approaches to acquiring short snapshots of the RF spectrum. In this work, we introduce an optical RF spectrum analyzer designed for continuous, wideband operation. Our approach encodes the RF spectrum as sidebands on an optical carrier and relies on a speckle spectrometer to measure these sidebands. To achieve the resolution and update rate required for RF analysis, we use Rayleigh backscattering in single-mode fiber to rapidly generate wavelength-dependent speckle patterns with MHz-level spectral correlation. We also introduce a dual-resolution scheme to mitigate the trade-off between resolution, bandwidth, and measurement rate. This optimized spectrometer design enables continuous, wideband (15 GHz) RF spectral analysis with MHz-level resolution and a fast update rate of 385 kHz. The entire system is constructed using fiber-coupled off-the-shelf-components, providing a powerful new approach for wideband RF detection and monitoring.

High-resolution wide-band optical frequency comb control using stimulated Brillouin scattering.

We introduce a technique to manipulate an optical frequency comb on a line-by-line basis using stimulated Brillouin scattering (SBS). The narrow-linewidth SBS process has been used to address individual lines in optical frequency combs, but previous demonstrations required a dedicated laser to modulate each comb tooth, prohibiting complete comb control. Here, we use a pair of frequency shifting fiber optic loops to generate both an optical frequency comb and a train of frequency-locked pulses that can be used to manipulate the comb via SBS. This approach enables control of the entire frequency comb using a single seed laser without active frequency locking. To demonstrate the versatility of this technique, we generate and manipulate a comb consisting of 50 lines with 200 MHz spacing. By using polarization pulling assisted SBS, we achieve a modulation depth of 30 dB. This represents a scalable approach to control large numbers of comb teeth with high resolution using standard fiber-optic components.

Reconfigurable liquid metal fiber-optic mirror for continuous, widely-tunable true-time-delay.

This paper reports the demonstration of a widely-translatable fiber-optic mirror based on the motion of liquid metal through the hollow core of a photonic bandgap fiber. By moving a liquid metal mirror within the hollow core of an optical fiber, large, continuous changes in optical path length are achieved in a comparatively small package. A fiber-optic device is demonstrated which provided a continuously-variable optical path length of over 3.6 meters, without the use of free-space optics or resonant optical techniques (i.e. slow light). This change in path length corresponds to a continuously-variable true-time delay of over 12 ns, or 120 periods at a modulation frequency of 10 GHz. Wavelength dependence was shown to be negligible across the C and L bands.

Tailored optical force fields using evolutionary algorithms.

We introduce a method whereby the electromagnetic field that governs the force on a Rayleigh particle can be tailored such that the resultant force field conforms to a desired geometry. The electromagnetic field is expanded as a set of vector spherical wavefunctions (VSWFs) that describe the field over all space. Given the incident field, the resultant force on a given Rayleigh particle can be calculated throughout a volume of interest. We use an evolutionary algorithm (EA) to search the space of coefficients governing the VSWFs for those that produce the desired force field. We demonstrate how Maxwell's equations will support an "optical tunnel" that guides particles to a trap location while at the same time preventing particles outside the tunnel from approaching the trap. This result is of interest because the field is impressed throughout the domain; that is to say, once the field is generated, no additional control is required to guide the particles.

Laser-induced thermophoresis of individual particles in a viscous liquid.

This paper presents a detailed investigation of the motion of individual micro-particles in a moderately-viscous liquid in direct response to a local, laser-induced temperature gradient. By measuring particle trajectories in 3D, and comparing them to a simulated temperature profile, it is confirmed that the thermally-induced particle motion is the direct result of thermophoresis. The elevated viscosity of the liquid provides for substantial differences in the behavior predicted by various models of thermophoresis, which in turn allows measured data to be most appropriately matched to a model proposed by Brenner. This model is then used to predict the effective force resulting from thermophoresis in an optical trap. Based on these results, we predict when thermophoresis will strongly inhibit the ability of radiation pressure to trap nano-scale particles. The model also predicts that the thermophoretic force scales linearly with the viscosity of the liquid, such that choice of liquid plays a key role in the relative strength of the thermophoretic and radiation forces.

Continuously-tunable microwave photonic true-time-delay based on a fiber-coupled beam deflector and diffraction grating.

This paper reports the demonstration of a continuously-tunable true-time delay line for microwave photonics and optical communications capable of high-resolution phase control throughout the 1-100 GHz modulation range. A fiber-coupled device is demonstrated with 75 ps of continuous delay tuning range, 3 dB optical insertion loss, and minimal RF amplitude and phase variation over the 4-18 GHz band. Measured delay ripple was less than 0.2 ps. Theoretical analysis is also presented which indicates scalability to delay tuning ranges over 1000 ps and modulation bandwidths over 10 THz.

Investigation of electrooptic modulator disruption by microwave-induced transients.

This paper presents a detailed investigation of the physical mechanisms underlying the disruption of a lithium niobate electrooptic modulator by RF pulses. It is shown that short-term modulator disruption is a direct consequence of resistive heating within the metal conductor of the coplanar waveguide electrode, which leads to a thermo-optic optical phase shift in the waveguides of the modulator. Resistive heating is also shown to contribute to permanent modulator damage at higher RF power. These results indicate that short-term RF disruption, and possibly RF damage, can be mitigated through improved thermal management. They also predict that short-term photonic link disruption can be reduced, if not eliminated, by use of a phase modulated photonic link.

Mode scalability in bent optical fibers.

This paper introduces a simple, analytical method for generalizing the behavior of bent, weakly-guided fibers and waveguides. It begins with a comprehensive study of the modes of the bent step-index fiber, which is later extended to encompass a wide range of more complicated waveguide geometries. The analysis is based on the introduction of a scaling parameter, analogous to the V-number for straight step-index fibers, for the bend radius. When this parameter remains constant, waveguides of different bend radii, numerical apertures and wavelengths will all propagate identical mode field distributions, except scaled in size. This allows the behavior of individual waveguides to be broadly extended, and is especially useful for generalizing the results of numerical simulations. The technique is applied to the bent step-index fiber in this paper to arrive at simple analytical formulae for the propagation constant and mode area, which are valid well beyond the transition to whispering-gallery modes. Animations illustrating mode deformation with respect to bending and curves describing polarization decoupling are also presented, which encompass the entire family of weakly-guided, step-index fibers.