RESUMEN
SPring-8-II is a major upgrade project of SPring-8 that was inaugurated in October 1997 as a third-generation synchrotron radiation light source. This upgrade project aims to achieve three goals simultaneously: achievement of excellent light source performance, refurbishment of aged systems, and significant reduction in power consumption for the entire facility. A small emittance of 50â pmâ rad will be achieved by (1) replacing the existing double-bend lattice structure with a five-bend achromat one, (2) lowering the stored beam energy from 8 to 6â GeV, (3) increasing the horizontal damping partition number from 1 to 1.3, and (4) enhancing horizontal radiation damping by installing damping wigglers in long straight sections. The use of short-period in-vacuum undulators allows ultrabrilliant X-rays to be provided while keeping a high-energy spectral range even at the reduced electron-beam energy of 6â GeV. To reduce power consumption, the dedicated, aged injector system has been shut down and the high-performance linear accelerator of SACLA, a compact X-ray free-electron laser (XFEL) facility, is used as the injector of the ring in a time-shared manner. This allows the simultaneous operation of XFEL experiments at SACLA and full/top-up injection of the electron beam into the ring. This paper overviews the concept of the SPring-8-II project, the system design of the light source and the details of the accelerator component design.
RESUMEN
In-vacuum undulators (IVUs), which have become an essential tool in synchrotron radiation facilities, have two technical challenges toward further advancement: one is a strong attractive force between top and bottom magnetic arrays, and the other is a stringent requirement on magnetic materials to avoid demagnetization. The former imposes a complicated design on mechanical and vacuum structures, while the latter limits the possibility of using high-performance permanent magnets. To solve these issues, a number of technical developments have been made, such as force cancellation and modularization of magnetic arrays, and enhancement of resistance against demagnetization by means of a special magnetic circuit. The performance of a new IVU built upon these technologies has revealed their effectiveness for constructing high-performance IVUs in a cost-effective manner.
RESUMEN
An insertion device capable of switching the operation mode between helical and figure-8 undulators, and thus referred to as a helical-8 undulator, has been developed. It has the advantage that the on-axis heat load can be kept low regardless of the polarization state, even when a high K value is required to lower the fundamental photon energy. This is in contrast to conventional undulators in which the on-axis heat load tends to be significantly high to generate linearly polarized radiation with a high K value, and optical elements can be seriously damaged. The principle of operation, specification and light source performance of the developed helical-8 undulator are presented together with further options to enhance its capability.
RESUMEN
A lightweight-compact variable-gap undulator (LCVGU) having the force-cancellation system based on the multipole monolithic magnets (MMMs) has been developed. The LCVGU is free from the heavy mechanical frames, which is a fundamental element specific to conventional variable-gap undulators (VGUs) because of a strong attractive force, and thus the cost and time for construction and installation are expected to be significantly reduced; the MMMs counteract the strong attractive force in a cost-effective manner. Results of mechanical tests and magnetic-field measurements of two prototype LCVGUs equipped with the proposed force cancellation system have revealed the comparable performance with the conventional VGUs.
RESUMEN
We report an unexpectedly large flux loss observed in permanent magnets in one of the undulators operated in SACLA, the x-ray free electron laser facility in Japan. Characterizations of individual magnets extracted from the relevant undulator have revealed that the flux loss was caused by a homogeneous magnetization reversal extending over a wide area, but not by demagnetization of individual magnets damaged by radiation. We show that the estimated flux-loss rate is much higher than what is reported in previous papers, and its distribution is much more localized to the upstream side. Results of numerical and experimental studies carried out to validate the magnetization reversal and quantify the flux loss are presented, together with possible countermeasures against rapid degradation of the undulator performance.
RESUMEN
A new soft X-ray beamline, BL07LSU, has been constructed at SPring-8 to perform advanced soft X-ray spectroscopy for materials science. The beamline is designed to achieve high energy resolution (E/ΔE> 10000) and high photon flux [>10(12)â photons s(-1) (0.01% bandwidth)(-1)] in the photon energy range 250-2000â eV with controllable polarization. To realise this state-of-the-art performance, a novel segmented cross undulator was developed and adopted as a light source. The details of the undulator light source and beamline monochromator design are described. The achieved performance of the beamline, such as the photon flux, energy resolution and the state of polarization, is reported.