RESUMEN
In this research, polyvinyl-alcohol (PVA)/gelatin (GEL)/propolis (Ps) biocompatible nanofiber patches were fabricated via electrospinning technique. The controlled release of Propolis, surface wettability behaviors, antimicrobial activities against the S. aureus and P. aeruginosa, and biocompatibility properties with the mesenchymal stem cells (MSCs) were investigated in detail. By adding 0.5, 1, and 3 wt.% GEL into the 13 wt.% PVA, the morphological and mechanical results suggested that 13 wt.% PVA/0.5 wt.% GEL patch can be an ideal matrix for 3 and 5 wt.% propolis addition. Morphological results revealed that the diameters of the electrospun nanofiber patches were increased with GEL (from 290 nm to 400 nm) and Ps addition and crosslinking process cause the formation of thicker nanofibers. The tensile strength and elongation at break enhancement were also determined for 13 wt.% PVA/0.5 wt.% GEL/3 wt.% Ps patch. Propolis was released quickly in the first hour and arrived at a plateau. Cell culture and contact angle results confirmed that the 3 wt.% addition of propolis reinforced mesenchymal stem cell proliferation and wettability properties of the patches. The antimicrobial activity demonstrated that propolis loaded patches had antibacterial activity against the S. aureus, but for P. aeruginosa, more studies should be performed.
Asunto(s)
Antiinfecciosos/administración & dosificación , Materiales Biocompatibles , Queratitis/tratamiento farmacológico , Queratitis/microbiología , Nanofibras , Própolis/administración & dosificación , Materiales Biocompatibles/química , Portadores de Fármacos/química , Liberación de Fármacos , Pruebas de Sensibilidad Microbiana , Nanofibras/química , Nanofibras/ultraestructura , Alcohol Polivinílico/química , Própolis/química , Pseudomonas aeruginosa/efectos de los fármacos , Espectroscopía Infrarroja por Transformada de Fourier , Staphylococcus aureus/efectos de los fármacos , Propiedades de SuperficieRESUMEN
In recent years, scaffolds produced in 3D printing technology have become more widespread tool due to providing more advantages than traditional methods in tissue engineering applications. In this research, it was aimed to produce patches for the treatment of tympanic membrane perforations which caused significant hearing loss by using 3D printing method. Polylactic acid(PLA) scaffolds with Chitosan(CS) and Sodium Alginate(SA) added in various ratios were prepared for artificial eardrum patches. Different amounts of chitosan and sodium alginate added to PLA increased the biocompatibility of the produced scaffolds. The created patches were designed by mimicking the thickness of the natural tympanic membrane thanks to the precision provided by the 3D printed method. The produced scaffolds were analyzed separately for chemical, morphological, mechanical and biocompatibility properties. Scanning electron microscope (SEM), Fourier-transform infrared (FT-IR) spectroscopy was performed to observe the surface morphology and chemical structure of the scaffolds. Mechanical, thermal and physical properties, swelling and degradation behaviors were examined to fully analyze whole characteristic features of the samples. Cell culture study was also performed to demonstrate the biocompatibility properties of the fabricated scaffolds with human adipose tissue-derived mesenchymal stem cells (hAD-MSCs). 15 wt % PLA was selected as the control group and among all concentrations of CS and SA, groups containing 3 wt% CS and 3 wt% SA showed significantly superior and favorable features in printing quality. The research continued with these two scaffolds (3 wt% CS, and 3 wt% SA), which showed improved print quality when added to PLA. Overall, these results show that PLA/CS and PLA/SA 3D printed artificial patches have the potential to tissue engineering solutions to repair tympanic membrane perforation for people with hearing loss.
Asunto(s)
Ingeniería de Tejidos , Andamios del Tejido , Humanos , Impresión Tridimensional , Espectroscopía Infrarroja por Transformada de Fourier , Membrana TimpánicaRESUMEN
Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is the agent responsible for the coronavirus disease of 2019 (COVID-19), which triggers lung failure, pneumonia, and multi-organ dysfunction. This enveloped, positive sense and single-stranded RNA virus can be transmitted through aerosol droplets, direct and indirect contacts. Thus, SARS-CoV-2 is highly contagious and has reached a pandemic level in a few months. Since COVID-19 has caused numerous human casualties and severe economic loss posing a global threat, the development of readily available, accurate, fast, and cost-effective diagnostic techniques in hospitals and in any places where humans spread the virus is urgently required. COVID-19 can be diagnosed by clinical findings and several laboratory tests. These tests may include virus isolation, nucleic acid-based molecular assays like real-time polymerase chain reactions, antigen or antibody-based immunological assays such as rapid immunochromatographic tests, enzyme-linked immunosorbent assays, immunofluorescence techniques, and indirect fluorescent antibody techniques, electrochemical sensors, etc. However, current methods should be developed by novel approaches for sensitive, specific, and accurate diagnosis of COVID-19 cases to control and prevent this outbreak. Thus, this review will cover an overview and comparison of multiple reports and commercially available kits that include molecular tests, immunoassays, and sensor-based diagnostic methods for diagnosis of COVID-19. The pros and cons of these methods and future perspectives will be thoroughly evaluated and discussed.
RESUMEN
Three-dimensional (3D) printing application is a promising method for bone tissue engineering. For enhanced bone tissue regeneration, it is essential to have printable composite materials with appealing properties such as construct porous, mechanical strength, thermal properties, controlled degradation rates, and the presence of bioactive materials. In this study, polycaprolactone (PCL), gelatin (GEL), bacterial cellulose (BC), and different hydroxyapatite (HA) concentrations were used to fabricate a novel PCL/GEL/BC/HA composite scaffold using 3D printing method for bone tissue engineering applications. Pore structure, mechanical, thermal, and chemical analyses were evaluated. 3D scaffolds with an ideal pore size (~300 µm) for use in bone tissue engineering were generated. The addition of both bacterial cellulose (BC) and hydroxyapatite (HA) into PCL/GEL scaffold increased cell proliferation and attachment. PCL/GEL/BC/HA composite scaffolds provide a potential for bone tissue engineering applications.