RESUMEN
Angiogenesis is a prominent component during the highly regulated process of wound healing. The application of exogenous vascular endothelial growth factor (VEGF) has shown considerable potential in facilitating angiogenesis. However, its effectiveness is often curtailed due to chronic inflammation and severe oxidative stress in diabetic wounds. Herein, an inflammation-responsive hydrogel incorporating Prussian blue nanoparticles (PBNPs) is designed to augment the angiogenic efficacy of VEGF. Specifically, the rapid release of PBNPs from the hydrogel under inflammatory conditions effectively alleviates the oxidative stress of the wound, therefore reprogramming the immune microenvironment to preserve the bioactivity of VEGF for enhanced angiogenesis. In vitro and in vivo studies reveal that the PBNPs and VEGF co-loaded hydrogel is biocompatible and possesses effective anti-inflammatory properties, thereby facilitating angiogenesis to accelerate the wound healing process in a type 2 diabetic mouse model.
RESUMEN
Different Cr-based bimetallic oxides were prepared, and their catalytic performance was evaluated on the simultaneous removal of multi-VOCs mixtures (acetone, benzene, toluene, and o-xylene) by ozonation. Among them, Co-Cr catalyst stood out in catalytic ozonation of aromatic VOCs, and its activity on acetone conversion was promoted by raising the temperature and ozone concentrations, owing to lower crystallization, larger surface area, excellent redox and VOCs/CO2 desorption ability. Above 95% conversion of all multi-VOCs was achieved over the Co-Cr catalyst when the temperature was 100 °C and an excess ozone ratio λ (the ratio of actual moles of ozone to theoretical moles of ozone needed) was equal to 3. A competitive relationship was noticed during the removal process of four multiple VOCs, with significant inhibition of acetone conversion in the presence of aromatic VOCs, conceivably due to adsorption competition and byproducts accumulation. Effects of NO/SO2/H2O and respective reversibility were also investigated. The inhibition effects of NO/SO2/H2O on aromatic VOCs were far less than those on acetone. Further, the retarding effect of NO was reversible, attributing to physical adsorption competition, but the inhibition effect of SO2/H2O was irreversible, due to the blockage of active sites for VOCs removal. With the combination of scrubbing, multi-VOCs and NO/SO2 could be removed by catalytic ozonation simultaneously and efficiently. In-situ DRIFTS measurement was also conducted to investigate the adsorption and catalytic ozonation process of multi-VOCs mixtures, as well as under the presence of SO2/H2O, discovering the major intermediates, surface carboxylates and carboxylic acids.
Asunto(s)
Topos , Ozono , Animales , Óxidos , Acetona , Catálisis , Ácidos CarboxílicosRESUMEN
On June 13, 2020, a liquefied petroleum gas tanker exploded in Wenling. Here, the authors describe the mass casualty emergency response to the explosion. The authors collected the medical records of 176 inpatients at 8 hospitals in Taizhou and Hangzhou. The 176 inpatients with blast injuries comprised 70 females and 106 males, with an average age of 45.48 ± 19.96 years, and more than half of the patients were farmers. They were transported to six hospitals distributed around the explosion site in Taizhou in the initial rescue period and were grouped according to their new injury severity score as having mild, moderate, severe, or extremely severe injuries. Most patients with severe and extremely severe injuries were admitted to a superior hospital for postsecondary triage. Forty-four patients experienced primary blast injuries, 137 experienced secondary blast injuries, 37 experienced tertiary blast injuries, and 40 patients experienced quaternary blast injuries. Multiple blast injuries were suffered by 62 patients. Most patients (95.45%) suffered external injuries, with the chest, extremities, and face as the main affected areas. Burns were diagnosed in 26 adults, of whom 15.38%, 19.23%, 7.70%, and 57.69% suffered mild, moderate, severe, and extremely severe cases. Sixteen burn patients suffered from burn-blast injuries. Upper limbs and the head/face/neck area, as exposed areas, were more likely to experience a burn injury. Inhalation was the main accompanying injury. Of the eight patients who died in the prehospital session, seven had burn injuries. This report on the accident and injury characteristics of an open-air LPG-related explosion will facilitate responses to subsequent catastrophes.
Asunto(s)
Traumatismos por Explosión , Quemaduras , Traumatismo Múltiple , Petróleo , Adulto , Masculino , Femenino , Humanos , Persona de Mediana Edad , Anciano , Explosiones , Quemaduras/complicaciones , Traumatismos por Explosión/complicaciones , Triaje , Estudios RetrospectivosRESUMEN
[This corrects the article DOI: 10.1016/j.mtbio.2022.100395.].
RESUMEN
Volatile organic compounds (VOCs) are an important source of air pollution, harmful to human health and the environment, and important precursors of secondary organic aerosols, O3 and photochemical smog. This study focused on the low-temperature catalytic oxidation and degradation of benzene, dichloroethane, methanethiol, methanol and methylamine by ozone. Benzene was used as a model compound, and a molecular sieve was selected as a catalyst carrier to prepare a series of supported active metal catalysts by impregnation. The effects of ozone on the catalytic oxidation of VOCs and catalysts' activity were studied. Taking benzene as a model compound, low-temperature ozone catalytic oxidation was conducted to explore the influence of the catalyst carrier, the active metal and the precious metal Pt on the catalytic degradation of benzene. The optimal catalyst appeared to be 0.75%Pt-10%Fe/HZSM(200). The catalytic activity and formation of the by-products methylamine, methanethiol, methanol, dichloroethane and benzene over 0.75%Pt-10%Fe/HZSM(200) were investigated. The structure, oxygen vacancy, surface properties and surface acidity of the catalysts were investigated. XRD, TEM, XPS, H2-TPR, EPR, CO2-TPD, BET, C6H6-TPD and Py-IR were combined to establish the correlation between the surface properties of the catalysts and the degradation activity.
Asunto(s)
Ozono , Compuestos Orgánicos Volátiles , Zeolitas , Humanos , Zeolitas/química , Benceno , Temperatura , Metanol , Dicloruros de Etileno , Catálisis , Oxidación-Reducción , MetilaminasRESUMEN
The incidence of liquefied petroleum gas (LPG)-related accidents in China has increased over the recent years. In addition, infection remains a big challenge in cases of severe burns. Therefore, the present study aimed to provide valuable information for a better control of infections in the event of such disasters. In this study, a total of 16 patients who suffered extremely severe burns after an LPG tanker explosion were included. Thereafter, bacteriological culture results were collected within a week. Of 16 patients, 13 (81.25%) were male and the average age of all patients was 60.63 years. In addition, the mean burned area was 83.03% TBSA. Additionally, a total of 553 organism cultures were conducted out of which 287 isolates (51.90%) showed positive results. Notably, 38.52% were Gram-negative bacteria, 7.59% were Gram-positive bacteria and 5.79% were fungi. Moreover, the most prevalent Gram-negative bacteria were Stenotrophomonas maltophilia (28.97%) followed by Acinetobacter baumannii (28.53%), and Klebsiella pneumoniae (14.02%). On the other hand, the three most predominant Gram-positive bacteria were Enterococcus faecalis (33.33%), Staphylococcus aureus (28.89%) and Staphylococcus sciuri (17.78%). Furthermore, the most common fungi included Candida (38.24%), Fusarium (20.59%) and Aspergillus fumigatus (14.71%). With regard to the bacterial resistance patterns, carbapenem-resistant organisms included Acinetobacter baumannii (97.80%), Pseudomonas aeruginosa (67.57%), and Klebsiella pneumoniae (75.56%). In addition, Staphylococcus sciuri, Staphylococcus epidermidis, and Staphylococcus haemolyticus were identified to be methicillin-resistant. This study revealed that there was a high incidence of infection in victims of severe burns as a result of mass burn accidents, accompanied by early fungal infection.
Asunto(s)
Acinetobacter baumannii , Bacteriología , Quemaduras , Petróleo , Infecciones Estafilocócicas , Humanos , Masculino , Persona de Mediana Edad , Femenino , Explosiones , Antibacterianos/uso terapéutico , Bacterias Grampositivas , Bacterias Gramnegativas , Quemaduras/epidemiología , Quemaduras/microbiología , China/epidemiología , Pruebas de Sensibilidad Microbiana , Estudios RetrospectivosRESUMEN
Diabetic foot ulcers, typical non-healing wounds, represent a severe clinical problem. Advanced glycation end-products (AGEs), which create a prolonged pro-inflammatory micro-environment in defective sites, can be responsible for refractoriness of these ulcers. Macrophages are polarized to the M2 phenotype to facilitate the transition from a pro-inflammatory microenvironment to an anti-inflammatory microenvironment, which has been demonstrated to be an effective way to accelerate diabetic wound closure. Herein, we developed coaxial hydro-membranes mimicking the extracellular matrix structure that are capable of anti-inflammatory and antibacterial functions for diabetic wound repair. These fibrous membranes maintain a moist microenvironment to support cell proliferation. Macrophages grow in an elongated shape on the surface of the fibrous membranes. The fibrous membranes effectively impaired macrophage AGE-induced M1 polarization and induced macrophage polarization towards the M2 phenotype. The effects of the fibrous membranes on the interactions between macrophages and repair cells under a diabetic condition were also investigated. Furthermore, in vivo results from a full-thickness diabetic wound model confirmed the potential of the coaxial hydro-membranes to accelerate wound healing. This study's results indicate that the developed bioactive anti-inflammatory and antibacterial wound dressing can affect AGE-induced macrophage activation and crosstalk between macrophages and fibroblasts for treating diabetic wounds.
RESUMEN
Ground-level ozone is an irritant and is harmful to human respiratory and nervous systems. Thus, four manganese oxides with different crystals were hydrothermally synthesized to decompose residual ozone (deO3) in an ozone synergistic-oxidation system. Among them, a cactus-like MnO2-IV nanosphere exhibited the highest deO3 activity, with excellent tolerance to water vapor and SO2/H2O, which could maintain >88% deO3 efficiency in the high-humidity and sulfur-containing conditions. It benefits from the unique morphology, high specific surface area, superior redox properties, oxygen chemisorption capabilities, abundant surface-active hydroxyl species, and low valence Mn species. More importantly, the detailed interference mechanism of O2/O3/H2O/SO2 molecules on MnO2-IV was revealed utilizing in situ diffused reflectance infrared Fourier transform spectroscopy and X-ray photoelectron spectroscopy. H2O generally caused recoverable deactivation, but that caused by SO2 was irreversible. The synergistic effect of SO2/H2O promoted the formation of an unstable sulfate species, thereby deepening the deactivation but inhibiting the irreversible poisoning. Finally, nine specific steps to decompose ozone via surface-active hydroxyl/intermediates were established.
RESUMEN
BACKGROUND Mass burn casualties impose an enormous burden on triage systems. The triage capacity of the Braden Scale for detecting injury severity has not been evaluated in mass burn casualties. MATERIAL AND METHODS The New Injury Severity Score (NISS) was used to dichotomize the injury severity of patients. The Braden Scale and other potentially indicative measurement tools were evaluated using univariate analysis and multivariate logistic regression. The relationships between the Braden Scale and other continuous variables with injury severity were further explored by correlation analysis and fitted with regression models. Receiver operating characteristic (ROC) curve analysis was used to validate triage capacity and compare prognostic accuracy. RESULTS A total of 160 hospitalized patients were included in our study; 37 were severely injured, and 123 were not. Injury severity was independently associated with the Numerical Rating Scale (adjusted OR, 1.816; 95% CI, 1.035-3.187) and Braden Scale (adjusted OR, 0.693; 95% CI, 0.564-0.851). The ROC curve of the fitted quadratic model of the Braden Scale was 0.896 (0.840-0.953), and the cut-off value was 17. The sensitivity was 81.08% (64.29-91.44%) and the specificity was 82.93% (74.85-88.89%). Comparison of ROC curves demonstrated an infinitesimal difference between the Braden Scale and NISS for predicting 30-day hospital discharge (Z=0.291, P=0.771) and Intensive Care Unit admission (Z=2.016, P=0.044). CONCLUSIONS The Braden Scale is a suitable triage tool for predicting injury severity and forecasting disability-related outcomes in patients affected by mass burn casualty incidents.
Asunto(s)
Quemaduras/diagnóstico , Puntaje de Gravedad del Traumatismo , Incidentes con Víctimas en Masa/estadística & datos numéricos , Triaje/métodos , Adulto , Anciano , Anciano de 80 o más Años , Femenino , Humanos , Masculino , Persona de Mediana Edad , Pronóstico , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , Adulto JovenRESUMEN
Treatment of full-thickness skin defects still presents a significant challenge in clinical practice. Three-dimensional (3D) bioprinting technique offers a promising approach for fabricating skin substitutes. However, it is necessary to identify bioinks that have both sufficient mechanical properties and desirable biocompatibilities. In this study, we successfully fabricated acellular dermal matrix (ADM) and gelatin methacrylamide (GelMA) bioinks. The results demonstrated that ADM preserved the main extracellular matrix (ECM) components of the skin and GelMA had tunable mechanical properties. Both bioinks with shear-thinning properties were suitable for 3D bioprinting and GelMA bioink exhibited high printability. Additionally, the results revealed that 20% GelMA with sufficient mechanical properties was suitable to engineer epidermis, 1.5% ADM and 10% GelMA displayed relatively good cytocompatibilities. Here, we proposed a new 3D structure to simulate natural full-thickness skin, which included 20% GelMA with HaCaTs as an epidermal layer, 1.5% ADM with fibroblasts as the dermis, and 10% GelMA mesh with human umbilical vein endothelial cells (HUVECs) as the vascular network and framework. We demonstrated that this 3D bioprinting functional skin model (FSM) could not only promote cell viability and proliferation, but also support epidermis reconstruction in vitro. When transplanted in vivo, the FSM could maintain cell viability for at least 1 week. Furthermore, the FSM promoted wound healing and re-epithelization, stimulated dermal ECM secretion and angiogenesis, and improved wound healing quality. The FSM may provide viable functional skin substitutes for future clinical applications. STATEMENT OF SIGNIFICANCE: We propose a new 3D structure to simulate natural full-thickness skin, which included 20% GelMA with HaCaTs as an epidermal layer, 1.5% ADM with fibroblasts as the dermis, and 10% GelMA mesh with HUVECs as the vascular network. It could not only maintain a moist microenvironment and barrier function, but also recreate the natural skin microenvironment to promote cell viability and proliferation. This may provide viable functional skin substitutes for future clinical applications.
Asunto(s)
Dermis Acelular , Bioimpresión , Acrilamidas , Gelatina , Células Endoteliales de la Vena Umbilical Humana , Humanos , Impresión Tridimensional , Ingeniería de Tejidos , Andamios del TejidoRESUMEN
Diseases, trauma, and injuries are highly prevalent conditions that lead to many critical tissue defects. Tissue engineering has great potentials to develop functional scaffolds that mimic natural tissue structures to improve or replace biological functions. In many kinds of technologies, electrospinning has received widespread attention for its outstanding functions, which is capable of producing nanofibre structures similar to the natural extracellular matrix. Amongst the available biopolymers for electrospinning, poly (caprolactone) (PCL) has shown favorable outcomes for tissue regeneration applications. According to the characteristics of different tissues, PCL can be modified by altering the functional groups or combining with other materials, such as synthetic polymers, natural polymers, and metal materials, to improve its physicochemical, mechanical, and biological properties, making the electrospun scaffolds meet the requirements of different tissue engineering and regenerative medicine. Moreover, efforts have been made to modify nanofibres with several bioactive substances to provide cells with the necessary chemical cues and a more in vivo like environment. In this review, some recent developments in both the design and utility of electrospun PCL-based scaffolds in the fields of bone, cartilage, skin, tendon, ligament, and nerve are highlighted, along with their potential impact on future research and clinical applications.
Asunto(s)
Nanofibras , Poliésteres , Medicina Regenerativa , Ingeniería de Tejidos , Andamios del Tejido , HumanosRESUMEN
Liquefied petroleum gas (LPG) is a widely used environment-friendly fuel. Previous studies have shown an increasing number of LPG-related burns. Our study was designed to evaluate the epidemiologic pattern of these injuries and provide recommendations for burn prevention. This retrospective study included all patients with LPG-related burns from eight burn centers in Zhejiang Province, China between 2011 and 2015. Database variables included patient demographics, accident characteristics, and injury characteristics. The association between different categorical variables was identified using the chi-square test. And the association between two or more means of quantitative variables was analyzed by the one-way analysis of variance or t-test. A total of 1898 patients were included, 47.31% were males and 52.69% were females. The predominant age group was 31 to 70 years (74.50%), and the majority were poorly educated and the incidence peaked from June to September. The most common place of occurrence was home (74.08%) and gas leak (96.52%) was the most common cause. The four limbs (43.33%) were the most frequently affected areas; the mean burn area was 25.19 ± 20.97% of the total body surface area and most patients (46.89%) suffered from moderate burns. The mean length of hospital stay was 17.66 ± 16.55 days and the majority of patients (89.36%) recovered with a 0.84% mortality rate. Our findings reflected that the increase in incidence rate was alarming, and the causes resulting in LPG-related burns have not gained much attention yet. Therefore, this calls for simple but strict measures aiming at each hazardous step during the use of LPG to prevent these burn injuries.