RESUMEN
Two-dimensional freestanding membranes of materials, which can be transferred onto and make interfaces with any material, have attracted attention in the search for functional properties that can be utilized for next-generation nanoscale devices. We fabricated stable 1-nm-thick hafnia membranes exhibiting the metastable rhombohedral structure and out-of-plane ferroelectric polarizations as large as 13 µC/cm2. We also found that the rhombohedral phase transforms into another metastable orthorhombic phase without the ferroelectricity deteriorating as the thickness increases. Our results reveal the key role of the rhombohedral phase in the scale-free ferroelectricity in hafnia and also provide critical insights into the formation mechanism and phase stability of the metastable hafnia. Moreover, ultrathin hafnia membranes enable heterointerfaces and devices to be fabricated from structurally dissimilar materials beyond structural constrictions in conventional film-growth techniques.
RESUMEN
Transparent and brown La2O3-MoO3 binary glasses were prepared in bulk form using a levitation technique. The glass-forming range was limited, with the primary composition being approximately 25 mol % La2O3. The 25La2O3-75MoO3 glass exhibited a clear crystallization at 546 °C, while determining its glass transition temperature was difficult. Notably, despite its amorphous nature, the glass possessed a density and packing density comparable to those of crystalline La2Mo3O12. X-ray absorption fine structure and Raman scattering analyses revealed that the glass structure closely resembles La2Mo3O12 due to the presence of isolated MoO42- units, whereas disordered atomic arrangement around La atoms was confirmed. The glass demonstrated transparency ranging from 378 to 5500 nm, and the refractive index at 1.0 µm was estimated to be 2.0. The optical bandgap energy was 3.46 eV, which was slightly smaller than that of La2Mo3O12. Additionally, the glass displayed a transparent region ranging from 6.5 to 8.0 µm. This occurrence results from the decreased diversity of MoOn units and connectivity of Mo-O-Mo, which resulted in the reduced overlap of multiphonon absorption. This glass formation, with its departure from conventional glass-forming rules, resulted in distinctive glasses with crystal-like atomic arrangements.
RESUMEN
The superconducting diode effect (SDE), which causes a superconducting state in one direction and a normal-conducting state in another, has significant potential for developing ultralow power consumption circuits and non-volatile memory. However, the practical control of the SDE necessities the precise tuning of current, temperature, magnetic field, or magnetism. Therefore, the mechanisms of the SDE must be understood to develop novel materials and devices capable of realizing the SDE under more controlled and robust conditions. This study demonstrates an intrinsic zero-field SDE with an efficiency of up to 40% in Fe/Pt-inserted non-centrosymmetric Nb/V/Ta superconducting artificial superlattices. The polarity and magnitude of the zero-field SDE are controllable by the direction of magnetization, indicating that the effective exchange field acts on Cooper pairs. Furthermore, the first-principles calculation indicates that the SDE can be enhanced by an asymmetric configuration of proximity induced magnetic moments in superconducting layers, which induces a magnetic toroidal moment. This study has important implications regarding the development of novel materials and devices that can effectively control the SDE. Moreover, the magnetization control of the SDE is expected to aid in the designing of superconducting quantum devices and establishing a material platform for topological superconductors.
RESUMEN
The A-site layer-ordered double perovskite SmBaFe2O6 was obtained by topochemical of oxidizing A-site layer-ordered SmBaFe2O5 in ozone at a low temperature. The compound contained unusually high and mixed valence Fe3.5+ and was found to show cascade charge transitions, described as SmBaFe3.5+2O6 â SmBa(Fe3+Fe4+)O6 â SmBa(Fe3+Fe(4-δ)+0.5Fe(4+δ)+0.5)O6 â SmBa(Fe3+1.5Fe5+0.5)O6, to relieve its electronic instability. The first Verwey-like charge-order transition occurred at 340 K and was accompanied by a significant structural change and a sudden increase in magnetic susceptibility. The following transition was the charge disproportionation of metastable Fe4+ to Fe3+ and Fe5+, and each of the spins resulted in the antiferromagnetic ground state. The most plausible charge-ordered patterns are proposed based on the electrostatic lattice energy calculations.
RESUMEN
Hole-collecting monolayers have drawn attention in perovskite solar cell research due to their ease of processing, high performance, and good durability. Since molecules in the hole-collecting monolayer are typically composed of functionalized π-conjugated structures, hole extraction is expected to be more efficient when the π-cores are oriented face-on with respect to the adjacent surfaces. However, strategies for reliably controlling the molecular orientation in monolayers remain elusive. In this work, multiple phosphonic acid anchoring groups were used to control the molecular orientation of a series of triazatruxene derivatives chemisorbed on a transparent conducting oxide electrode surface. Using infrared reflection absorption spectroscopy and metastable atom electron spectroscopy, we found that multipodal derivatives align face-on to the electrode surface, while the monopodal counterpart adopts a more tilted configuration. The face-on orientation was found to facilitate hole extraction, leading to inverted perovskite solar cells with enhanced stability and high-power conversion efficiencies up to 23.0%.
RESUMEN
Spin current, converted from charge current via spin Hall or Rashba effects, can transfer its angular momentum to local moments in a ferromagnetic layer. In this regard, the high charge-to-spin conversion efficiency is required for magnetization manipulation for developing future memory or logic devices including magnetic random-access memory. Here, the bulk Rashba-type charge-to-spin conversion is demonstrated in an artificial superlattice without centrosymmetry. The charge-to-spin conversion in [Pt/Co/W] superlattice with sub-nm scale thickness shows strong W thickness dependence. When the W thickness becomes 0.6 nm, the observed field-like torque efficiency is about 0.6, which is an order larger than other metallic heterostructures. First-principles calculation suggests that such large field-like torque arises from bulk-type Rashba effect due to the vertically broken inversion symmetry inherent from W layers. The result implies that the spin splitting in a band of such an ABC-type artificial SL can be an additional degree of freedom for the large charge-to-spin conversion.
RESUMEN
Hydrogen spillover is a phenomenon in which hydrogen atoms generated on metal catalysts diffuse onto catalyst supports. This phenomenon offers reaction routes for functional materials. However, due to difficulties in visualizing hydrogen, the fundamental nature of the phenomenon, such as how far hydrogen diffuses, has not been well understood. Here, in this study, we fabricated catalytic model systems based on Pd-loaded SrFeOx (x â¼ 2.8) epitaxial films and investigated hydrogen spillover. We show that hydrogen spillover on the SrFeOx support extends over long distances (â¼600 µm). Furthermore, the hydrogen-spillover-induced reduction of Fe4+ in the support yields large energies (as large as 200 kJ/mol), leading to the spontaneous hydrogen transfer and driving the surprisingly ultralong hydrogen diffusion. These results show that the valence changes in the supports' surfaces are the primary factor determining the hydrogen spillover distance. Our study leads to a deeper understanding of the long-debated issue of hydrogen spillover and provides insight into designing catalyst systems with enhanced properties.
RESUMEN
CdMnO3 had not been previously reported and was a missing piece in the A2+Mn4+O3 series. We succeeded in synthesizing this compound by a high-pressure method and confirmed that it is crystallized in a distorted perovskite structure with a Cd2+Mn4+O3 charge configuration. The obtained insulating CdMnO3 exhibits an antiferromagnetic transition at about 86 K. First-principles calculations revealed that the Mn4+ (t2g3) spins form a C-type antiferromagnetic structure, which is in sharp contrast to the G-type antiferromagnetism in the isostructural and isoelectronic CaMnO3. Significant overlap of the Mn-3d and O(2)-2p orbitals produces distorted octahedra with a large Mn-O(1)-Mn tilt and induces antiferromagnetic couplings in the ac plane and the ferromagnetic couplings along the b axis.
RESUMEN
Melanin is an organic material biosynthesized from tyrosine in pigment-producing cells. The present study reports a simple method to generate tailored functional materials in mammalian cells by chemically fabricating intracellular melanin. Our approach exploits synthetic tyrosine derivatives to hijack the melanin biosynthesis pathway in pigment-producing cells. Its application was exemplified by synthesizing and using a paramagnetic tyrosine derivative, m-YR, which endowed melanoma cells with responsiveness to external magnetic fields. The mechanical force generated by the magnet-responsive melanin forced the cells to elongate and align parallel to the magnetic power lines. Critically, even non-pigment cells were similarly remote-controlled by external magnetic fields once engineered to express tyrosinase and treated with m-YR, suggesting the versatility of the approach. The present methodology may potentially provide a new avenue for mechanobiology and magnetogenetic studies and a framework for magnetic control of specific cells.
Asunto(s)
Melaninas , Monofenol Monooxigenasa , Animales , Fenómenos Magnéticos , Mamíferos/metabolismo , Melaninas/metabolismo , Monofenol Monooxigenasa/metabolismo , Tirosina/metabolismoRESUMEN
The diode effect is fundamental to electronic devices and is widely used in rectifiers and a.c.-d.c. converters. At low temperatures, however, conventional semiconductor diodes possess a high resistivity, which yields energy loss and heating during operation. The superconducting diode effect (SDE)1-8, which relies on broken inversion symmetry in a superconductor, may mitigate this obstacle: in one direction, a zero-resistance supercurrent can flow through the diode, but for the opposite direction of current flow, the device enters the normal state with ohmic resistance. The application of a magnetic field can induce SDE in Nb/V/Ta superlattices with a polar structure1,2, in superconducting devices with asymmetric patterning of pinning centres9 or in superconductor/ferromagnet hybrid devices with induced vortices10,11. The need for an external magnetic field limits their practical application. Recently, a field-free SDE was observed in a NbSe2/Nb3Br8/NbSe2 junction; it originates from asymmetric Josephson tunnelling that is induced by the Nb3Br8 barrier and the associated NbSe2/Nb3Br8 interfaces12. Here, we present another implementation of zero-field SDE using noncentrosymmetric [Nb/V/Co/V/Ta]20 multilayers. The magnetic layers provide the necessary symmetry breaking, and we can tune the SDE by adjusting the structural parameters, such as the constituent elements, film thickness, stacking order and number of repetitions. We control the polarity of the SDE through the magnetization direction of the ferromagnetic layers. Artificially stacked structures13-18, such as the one used in this work, are of particular interest as they are compatible with microfabrication techniques and can be integrated with devices such as Josephson junctions19-22. Energy-loss-free SDEs as presented in this work may therefore enable novel non-volatile memories and logic circuits with ultralow power consumption.
RESUMEN
Dependence on lithium-ion batteries for automobile applications is rapidly increasing. The emerging use of anionic redox can boost the energy density of batteries, but the fundamental origin of anionic redox is still under debate. Moreover, to realize anionic redox, many reported electrode materials rely on manganese ions through π-type interactions with oxygen. Here, through a systematic experimental and theoretical study on a binary system of Li3NbO4-NiO, we demonstrate for the first time the unexpectedly large contribution of oxygen to charge compensation for electrochemical oxidation in Ni-based materials. In general, for Ni-based materials, e.g., LiNiO2, charge compensation is achieved mainly by Ni oxidation, with a lower contribution from oxygen. In contrast, for Li3NbO4-NiO, oxygen-based charge compensation is triggered by structural disordering and σ-type interactions with nickel ions, which are associated with a unique environment for oxygen, i.e., a linear Ni-O-Ni configuration in the disordered system. Reversible anionic redox with a small hysteretic behavior was achieved for LiNi2/3Nb1/3O2 with a cation-disordered Li/Ni arrangement. Further Li enrichment in the structure destabilizes anionic redox and leads to irreversible oxygen loss due to the disappearance of the linear Ni-O-Ni configuration and the formation of unstable Ni ions with high oxidation states. On the basis of these results, we discuss the possibility of using σ-type interactions for anionic redox to design advanced electrode materials for high-energy lithium-ion batteries.
RESUMEN
The ambient pressure cation disordered InVO3 bixbyite has been predicted to form a GdFeO3 -type perovskite phase under high pressure and high temperature. Contrary to the expectation, InVO3 was found to crystallize in the polar LiNbO3 -type structure with a calculated spontaneous polarization as large as 74â µC cm-2 . Antiferromagnetic coupling of V3+ magnetic moments and a cooperative magnetic ground state below about 10â K coupled with a polar structure suggest an intriguing ground state of the novel LiNbO3 -type high-pressure InVO3 structure.
RESUMEN
Cation ordering in solids is important for controlling physical properties and leads to ilmenite (FeTiO3 ) and LiNbO3 type derivatives of the corundum structure, with ferroelectricity resulting from breaking of inversion symmetry in the latter. However, a hypothetical third ABO3 derivative with R32 symmetry has never been observed. Here we show that Co2 InSbO6 recovered from high pressure has a new, ordered-R32 A2 BCO6 variant of the corundum structure. Co2 InSbO6 is also remarkable for showing two cation redistributions, to (Co0.5 In0.5 )2 CoSbO6 and then Co2 InSbO6 variants of the ordered-LiNbO3 A2 BCO6 structure on heating. The cation distributions change magnetic properties as the final ordered-LiNbO3 product has a sharp ferrimagnetic transition unlike the initial ordered-R32 phase. Future syntheses of metastable corundum derivatives at pressure are likely to reveal other cation-redistribution pathways, and may enable ABO3 materials with the R32 structure to be discovered.
RESUMEN
We discovered new B-site-ordered double perovskites Ln2LiFeO6 (Ln = La, Nd, Sm, and Eu) with most likely unusually high valence Fe5+, which was stabilized by strong oxidizing high-pressure synthesis. Despite large antiferromagnetic interactions between Fe5+ spins in these compounds, the magnetic ordering is strongly suppressed due to the geometrical frustration of Fe5+ located in a face-centered cubic lattice. In addition, canted magnetic structures are stabilized only in those with Ln = Sm and Eu, which is most likely due to significant Dzyaloshinskii Moriya interaction caused by large monoclinic structural distortion. These results provide a deep understanding of the structure-property relationships in geometrically frustrated B-site-ordered double perovskites.
RESUMEN
Magnetite (Fe3O4) is of fundamental importance for the Verwey transition near TV = 125 K, below which a complex lattice distortion and electron orders occur. The Verwey transition is suppressed by chemical doping effects giving rise to well-documented first and second-order regimes, but the origin of the order change is unclear. Here, we show that slow oxidation of monodisperse Fe3O4 nanoparticles leads to an intriguing variation of the Verwey transition: an initial drop of TV to a minimum at 70 K after 75 days and a followed recovery to 95 K after 160 days. A physical model based on both doping and doping-gradient effects accounts quantitatively for this evolution between inhomogeneous to homogeneous doping regimes. This work demonstrates that slow oxidation of nanoparticles can give exquisite control and separation of homogeneous and inhomogeneous doping effects on the Verwey transition and offers opportunities for similar insights into complex electronic and magnetic phase transitions in other materials.
RESUMEN
Caloric effects of solids can provide us with innovative refrigeration systems more efficient and environment-friendly than the widely-used conventional vapor-compression cooling systems. Exploring novel caloric materials is challenging but critically important in developing future technologies. Here we discovered that the quadruple perovskite structure ferrimagnet BiCu3Cr4O12 shows large multiple caloric effects at the first-order charge transition occurring around 190 K. Large latent heat and the corresponding isothermal entropy change, 28.2 J K-1 kg-1, can be utilized by applying both magnetic fields (a magnetocaloric effect) and pressure (a barocaloric effect). Adiabatic temperature changes reach 3.9 K for the 50 kOe magnetic field and 4.8 K for the 4.9 kbar pressure, and thus highly efficient thermal controls are achieved in multiple ways.
RESUMEN
The antiferromagnetic behavior of Fe3+ oxides of composition RE1.2Ba1.2Ca0.6Fe3O8, RE2.2Ba3.2Ca2.6Fe8O21, and REBa2Ca2Fe5O13 (RE = Gd, Tb) is highly influenced by the type of oxygen polyhedron around the Fe3+ cations and their ordering, which is coupled with the layered RE/Ba/Ca arrangement within the perovskite-related structure. Determination of the magnetic structures reveals different magnetic moments associated with Fe3+ spins in the different oxygen polyhedra (octahedron, tetrahedron, and square pyramid). The structural aspects impact on the strength of the Fe-O-Fe superexchange interactions and, therefore, on the Néel temperature (TN) of the compounds. The oxides present an interesting transition from three-dimensional (3D) to two-dimensional (2D) magnetic behavior above TN. The 2D magnetic interactions are stronger within the FeO6 octahedra layers than in the FeO4 tetrahedra layers.
RESUMEN
From our material exploration study in wide pressure and temperature conditions, we found a new 6H polymorph of BaRhO3 was stabilised under high pressure conditions from 14 to 22 GPa. The material crystallised in the monoclinic 6H hexagonal perovskite structure in space group C2/c. The 4H BaRhO3 polymorph was stabilised at lower pressures, but the 3C cubic BaRhO3 likely requires pressures greater than 22 GPa. Both 6H and 4H polymorphs contain Rh2O9 dimers and the large 4d Rh orbital spatial diffusivity in these dimers leads to Pauli paramagnetic and metallic ground states, which are also supported by first-principles electronic structure calculations. High Wilson ratios of approximately 2 for either compound indicate strong electron correlation.
RESUMEN
Distinguishing toxic gases among the various volatile sulfur compounds (VSCs) is of significant practical value for atmospheric and environmental pollution monitoring, industrial monitoring, and even for medical diagnostics (where VSCs are indicators of diseases). The particular challenge lies in the detection and discrimination of sulfur-containing gases such as dimethyl disulfide (DMDS), methyl sulfide (DMS), hydrogen sulfide (H2S), and carbon disulfide (CS2) is of value. Herein, single-phase perovskite-type LnFeO3 nanoparticles were prepared by the citrate sol-gel method. Their gas sensing characteristics regard to the four typical VSCs were investigated. We found that the gas response of the p-type semiconductor LnFeO3 gas sensors to the four typical VSCs are significantly different. In addition, the sensors offer high performance, good tolerance to environmental changes and long-term stability for detecting VSCs gas at an operating temperature of 210 °C. A new design of sensor array was realized by integrating a series of LnFeO3 materials, which revealed excellent recognition ability for various VSCs, showing promise for real time monitoring.